linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: linux-pci@vger.kernel.org, benh@kernel.crashing.org,
	mpe@ellerman.id.au, alistair@popple.id.au, aik@ozlabs.ru,
	Gavin Shan <gwshan@linux.vnet.ibm.com>
Subject: [PATCH v10 17/18] powerpc/powernv: Functions to get/set PCI slot state
Date: Fri, 20 May 2016 16:41:41 +1000	[thread overview]
Message-ID: <1463726502-14679-18-git-send-email-gwshan@linux.vnet.ibm.com> (raw)
In-Reply-To: <1463726502-14679-1-git-send-email-gwshan@linux.vnet.ibm.com>

This exports 4 functions, which base on the corresponding OPAL
APIs to get/set PCI slot status. Those functions are going to
be used by PowerNV PCI hotplug driver:

   pnv_pci_get_device_tree()    opal_get_device_tree()
   pnv_pci_get_presence_state() opal_pci_get_presence_state()
   pnv_pci_get_power_state()    opal_pci_get_power_state()
   pnv_pci_set_power_state()    opal_pci_set_power_state()

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
---
 arch/powerpc/include/asm/opal-api.h            | 19 +++++-
 arch/powerpc/include/asm/opal.h                |  6 ++
 arch/powerpc/include/asm/pnv-pci.h             |  6 ++
 arch/powerpc/platforms/powernv/opal-wrappers.S |  4 ++
 arch/powerpc/platforms/powernv/pci.c           | 82 ++++++++++++++++++++++++++
 5 files changed, 116 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
index 9bb8ddf..2417c86 100644
--- a/arch/powerpc/include/asm/opal-api.h
+++ b/arch/powerpc/include/asm/opal-api.h
@@ -158,7 +158,11 @@
 #define OPAL_LEDS_SET_INDICATOR			115
 #define OPAL_CEC_REBOOT2			116
 #define OPAL_CONSOLE_FLUSH			117
-#define OPAL_LAST				117
+#define OPAL_GET_DEVICE_TREE			118
+#define OPAL_PCI_GET_PRESENCE_STATE		119
+#define OPAL_PCI_GET_POWER_STATE		120
+#define OPAL_PCI_SET_POWER_STATE		121
+#define OPAL_LAST				121
 
 /* Device tree flags */
 
@@ -344,6 +348,18 @@ enum OpalPciResetState {
 	OPAL_ASSERT_RESET   = 1
 };
 
+enum OpalPciSlotPresentenceState {
+	OPAL_PCI_SLOT_EMPTY	= 0,
+	OPAL_PCI_SLOT_PRESENT	= 1
+};
+
+enum OpalPciSlotPowerState {
+	OPAL_PCI_SLOT_POWER_OFF	= 0,
+	OPAL_PCI_SLOT_POWER_ON	= 1,
+	OPAL_PCI_SLOT_OFFLINE	= 2,
+	OPAL_PCI_SLOT_ONLINE	= 3
+};
+
 enum OpalSlotLedType {
 	OPAL_SLOT_LED_TYPE_ID = 0,	/* IDENTIFY LED */
 	OPAL_SLOT_LED_TYPE_FAULT = 1,	/* FAULT LED */
@@ -378,6 +394,7 @@ enum opal_msg_type {
 	OPAL_MSG_DPO		= 5,
 	OPAL_MSG_PRD		= 6,
 	OPAL_MSG_OCC		= 7,
+	OPAL_MSG_PCI_HOTPLUG	= 8,
 	OPAL_MSG_TYPE_MAX,
 };
 
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 348132c..fa71fea 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -209,6 +209,12 @@ int64_t opal_flash_write(uint64_t id, uint64_t offset, uint64_t buf,
 		uint64_t size, uint64_t token);
 int64_t opal_flash_erase(uint64_t id, uint64_t offset, uint64_t size,
 		uint64_t token);
+int64_t opal_get_device_tree(uint32_t phandle, uint64_t buf, uint64_t len);
+int64_t opal_pci_get_presence_state(uint64_t id, uint64_t data);
+int64_t opal_pci_get_power_state(uint64_t id, uint64_t data);
+int64_t opal_pci_set_power_state(uint64_t async_token, uint64_t id,
+				 uint64_t data);
+int64_t opal_pci_poll2(uint64_t id, uint64_t data);
 
 /* Internal functions */
 extern int early_init_dt_scan_opal(unsigned long node, const char *uname,
diff --git a/arch/powerpc/include/asm/pnv-pci.h b/arch/powerpc/include/asm/pnv-pci.h
index 810cc9a..791db1b 100644
--- a/arch/powerpc/include/asm/pnv-pci.h
+++ b/arch/powerpc/include/asm/pnv-pci.h
@@ -12,12 +12,18 @@
 
 #include <linux/pci.h>
 #include <misc/cxl-base.h>
+#include <asm/opal-api.h>
 
 #define PCI_SLOT_ID_PREFIX	0x8000000000000000
 #define PCI_SLOT_ID(phb_id, bdfn)	\
 	(PCI_SLOT_ID_PREFIX | ((uint64_t)(bdfn) << 16) | (phb_id))
 
 extern int pnv_pci_get_slot_id(struct device_node *np, uint64_t *id);
+extern int pnv_pci_get_device_tree(uint32_t phandle, void *buf, uint64_t len);
+extern int pnv_pci_get_presence_state(uint64_t id, uint8_t *state);
+extern int pnv_pci_get_power_state(uint64_t id, uint8_t *state);
+extern int pnv_pci_set_power_state(uint64_t id, uint8_t state,
+				   struct opal_msg *msg);
 
 int pnv_phb_to_cxl_mode(struct pci_dev *dev, uint64_t mode);
 int pnv_cxl_ioda_msi_setup(struct pci_dev *dev, unsigned int hwirq,
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index e45b88a..3ea1a855 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -302,3 +302,7 @@ OPAL_CALL(opal_prd_msg,				OPAL_PRD_MSG);
 OPAL_CALL(opal_leds_get_ind,			OPAL_LEDS_GET_INDICATOR);
 OPAL_CALL(opal_leds_set_ind,			OPAL_LEDS_SET_INDICATOR);
 OPAL_CALL(opal_console_flush,			OPAL_CONSOLE_FLUSH);
+OPAL_CALL(opal_get_device_tree,			OPAL_GET_DEVICE_TREE);
+OPAL_CALL(opal_pci_get_presence_state,		OPAL_PCI_GET_PRESENCE_STATE);
+OPAL_CALL(opal_pci_get_power_state,		OPAL_PCI_GET_POWER_STATE);
+OPAL_CALL(opal_pci_set_power_state,		OPAL_PCI_SET_POWER_STATE);
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 2607d29..62c7637 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -74,6 +74,88 @@ int pnv_pci_get_slot_id(struct device_node *np, uint64_t *id)
 }
 EXPORT_SYMBOL_GPL(pnv_pci_get_slot_id);
 
+int pnv_pci_get_device_tree(uint32_t phandle, void *buf, uint64_t len)
+{
+	int64_t rc;
+
+	if (!opal_check_token(OPAL_GET_DEVICE_TREE))
+		return -ENXIO;
+
+	rc = opal_get_device_tree(phandle, (uint64_t)buf, len);
+	if (rc < OPAL_SUCCESS)
+		return -EIO;
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(pnv_pci_get_device_tree);
+
+int pnv_pci_get_presence_state(uint64_t id, uint8_t *state)
+{
+	int64_t rc;
+
+	if (!opal_check_token(OPAL_PCI_GET_PRESENCE_STATE))
+		return -ENXIO;
+
+	rc = opal_pci_get_presence_state(id, (uint64_t)state);
+	if (rc != OPAL_SUCCESS)
+		return -EIO;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pnv_pci_get_presence_state);
+
+int pnv_pci_get_power_state(uint64_t id, uint8_t *state)
+{
+	int64_t rc;
+
+	if (!opal_check_token(OPAL_PCI_GET_POWER_STATE))
+		return -ENXIO;
+
+	rc = opal_pci_get_power_state(id, (uint64_t)state);
+	if (rc != OPAL_SUCCESS)
+		return -EIO;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pnv_pci_get_power_state);
+
+int pnv_pci_set_power_state(uint64_t id, uint8_t state, struct opal_msg *msg)
+{
+	struct opal_msg m;
+	int token, ret;
+	int64_t rc;
+
+	if (!opal_check_token(OPAL_PCI_SET_POWER_STATE))
+		return -ENXIO;
+
+	token = opal_async_get_token_interruptible();
+	if (unlikely(token < 0))
+		return token;
+
+	rc = opal_pci_set_power_state(token, id, (uint64_t)&state);
+	if (rc == OPAL_SUCCESS) {
+		ret = 0;
+		goto exit;
+	} else if (rc != OPAL_ASYNC_COMPLETION) {
+		ret = -EIO;
+		goto exit;
+	}
+
+	ret = opal_async_wait_response(token, &m);
+	if (ret < 0)
+		goto exit;
+
+	if (msg) {
+		ret = 1;
+		memcpy(msg, &m, sizeof(m));
+	}
+
+exit:
+	opal_async_release_token(token);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pnv_pci_set_power_state);
+
 #ifdef CONFIG_PCI_MSI
 int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 {
-- 
2.1.0

  parent reply	other threads:[~2016-05-20  6:43 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-20  6:41 [PATCH v10 00/18] powerpc/powernv: PCI hotplug support Gavin Shan
2016-05-20  6:41 ` [PATCH v10 01/18] PCI: Add pcibios_setup_bridge() Gavin Shan
2016-06-21 12:27   ` [v10,01/18] " Michael Ellerman
2016-05-20  6:41 ` [PATCH v10 02/18] powerpc/pci: Override pcibios_setup_bridge() Gavin Shan
2016-05-20  6:41 ` [PATCH v10 03/18] powerpc/powernv: Remove PCI_RESET_DELAY_US Gavin Shan
2016-06-01  2:35   ` Andrew Donnellan
2016-05-20  6:41 ` [PATCH v10 04/18] powerpc/powernv: Move pnv_pci_ioda_setup_opal_tce_kill() around Gavin Shan
2016-05-20  6:41 ` [PATCH v10 05/18] powerpc/powernv: Increase PE# capacity Gavin Shan
2016-05-20  6:41 ` [PATCH v10 06/18] powerpc/powernv: Allocate PE# in reverse order Gavin Shan
2016-05-20  6:41 ` [PATCH v10 07/18] powerpc/powernv: Create PEs in pcibios_setup_bridge() Gavin Shan
2016-05-20  6:41 ` [PATCH v10 08/18] powerpc/powernv: Setup PE for root bus Gavin Shan
2016-05-20  6:41 ` [PATCH v10 09/18] powerpc/powernv: Extend PCI bridge resources Gavin Shan
2016-06-08  3:47   ` Alexey Kardashevskiy
2016-06-10  4:33     ` Gavin Shan
2016-06-10  5:28       ` Alexey Kardashevskiy
2016-06-10  5:45         ` Benjamin Herrenschmidt
2016-06-10  6:37           ` Gavin Shan
2016-05-20  6:41 ` [PATCH v10 10/18] powerpc/powernv: Make pnv_ioda_deconfigure_pe() visible Gavin Shan
2016-05-20  6:41 ` [PATCH v10 11/18] powerpc/powernv: Dynamically release PE Gavin Shan
2016-05-20  6:41 ` [PATCH v10 12/18] powerpc/pci: Update bridge windows on PCI plug Gavin Shan
2016-05-20  6:41 ` [PATCH v10 13/18] powerpc/pci: Delay populating pdn Gavin Shan
2016-06-23  0:59   ` Daniel Axtens
2016-06-23  1:34     ` Gavin Shan
2016-05-20  6:41 ` [PATCH v10 14/18] powerpc/powernv: Support PCI slot ID Gavin Shan
2016-05-20  6:41 ` [PATCH v10 15/18] powerpc/powernv: Use PCI slot reset infrastructure Gavin Shan
2016-05-20  6:41 ` [PATCH v10 16/18] powerpc/powernv: Introduce pnv_pci_get_slot_id() Gavin Shan
2016-05-20  6:41 ` Gavin Shan [this message]
2016-06-17 10:32   ` [v10,17/18] powerpc/powernv: Functions to get/set PCI slot state Michael Ellerman
2016-06-18  3:18     ` Gavin Shan
2016-05-20  6:41 ` [PATCH v10 18/18] PCI/hotplug: PowerPC PowerNV PCI hotplug driver Gavin Shan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1463726502-14679-18-git-send-email-gwshan@linux.vnet.ibm.com \
    --to=gwshan@linux.vnet.ibm.com \
    --cc=aik@ozlabs.ru \
    --cc=alistair@popple.id.au \
    --cc=benh@kernel.crashing.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpe@ellerman.id.au \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).