From: Jia Hongtao <hongtao.jia@nxp.com>
To: <edubezval@gmail.com>, <rui.zhang@intel.com>,
<robh+dt@kernel.org>, <galak@codeaurora.org>,
<scott.wood@nxp.com>, <shawnguo@kernel.org>
Cc: <linux-pm@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linuxppc-dev@lists.ozlabs.org>,
<linux-arm-kernel@lists.infradead.org>, <hongtao.jia@nxp.com>
Subject: [PATCH 6/7] arm64:dt:ls2080a: Add TMU device tree support for LS2080A
Date: Fri, 3 Jun 2016 14:57:38 +0800 [thread overview]
Message-ID: <1464937059-19349-6-git-send-email-hongtao.jia@nxp.com> (raw)
In-Reply-To: <1464937059-19349-1-git-send-email-hongtao.jia@nxp.com>
Also add nodes and properties for thermal management support.
Signed-off-by: Jia Hongtao <hongtao.jia@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 116 +++++++++++++++++++--
4 files changed, 111 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
index e8801fa..18e99f4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
@@ -46,7 +46,7 @@
/dts-v1/;
-/include/ "fsl-ls2080a.dtsi"
+#include "fsl-ls2080a.dtsi"
/ {
model = "Freescale Layerscape 2080a QDS Board";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
index e127f0b..f1c8115 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
@@ -46,7 +46,7 @@
/dts-v1/;
-/include/ "fsl-ls2080a.dtsi"
+#include "fsl-ls2080a.dtsi"
/ {
model = "Freescale Layerscape 2080a RDB Board";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
index 505d038..290604b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
@@ -46,7 +46,7 @@
/dts-v1/;
-/include/ "fsl-ls2080a.dtsi"
+#include "fsl-ls2080a.dtsi"
/ {
model = "Freescale Layerscape 2080a software Simulator model";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index 3187c82..5cc27df 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -44,6 +44,8 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
+#include <dt-bindings/thermal/thermal.h>
+
/ {
compatible = "fsl,ls2080a";
interrupt-parent = <&gic>;
@@ -62,56 +64,60 @@
*/
/* We have 4 clusters having 2 Cortex-A57 cores each */
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x0>;
clocks = <&clockgen 1 0>;
+ #cooling-cells = <2>;
};
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x1>;
clocks = <&clockgen 1 0>;
};
- cpu@100 {
+ cpu2: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x100>;
clocks = <&clockgen 1 1>;
+ #cooling-cells = <2>;
};
- cpu@101 {
+ cpu3: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x101>;
clocks = <&clockgen 1 1>;
};
- cpu@200 {
+ cpu4: cpu@200 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x200>;
clocks = <&clockgen 1 2>;
+ #cooling-cells = <2>;
};
- cpu@201 {
+ cpu5: cpu@201 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x201>;
clocks = <&clockgen 1 2>;
};
- cpu@300 {
+ cpu6: cpu@300 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x300>;
clocks = <&clockgen 1 3>;
+ #cooling-cells = <2>;
};
- cpu@301 {
+ cpu7: cpu@301 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x301>;
@@ -191,6 +197,100 @@
clocks = <&sysclk>;
};
+ tmu: tmu@1f80000 {
+ compatible = "fsl,qoriq-tmu";
+ reg = <0x0 0x1f80000 0x0 0x10000>;
+ interrupts = <0 23 0x4>;
+ fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
+ fsl,tmu-calibration = <0x00000000 0x00000026
+ 0x00000001 0x0000002d
+ 0x00000002 0x00000032
+ 0x00000003 0x00000039
+ 0x00000004 0x0000003f
+ 0x00000005 0x00000046
+ 0x00000006 0x0000004d
+ 0x00000007 0x00000054
+ 0x00000008 0x0000005a
+ 0x00000009 0x00000061
+ 0x0000000a 0x0000006a
+ 0x0000000b 0x00000071
+
+ 0x00010000 0x00000025
+ 0x00010001 0x0000002c
+ 0x00010002 0x00000035
+ 0x00010003 0x0000003d
+ 0x00010004 0x00000045
+ 0x00010005 0x0000004e
+ 0x00010006 0x00000057
+ 0x00010007 0x00000061
+ 0x00010008 0x0000006b
+ 0x00010009 0x00000076
+
+ 0x00020000 0x00000029
+ 0x00020001 0x00000033
+ 0x00020002 0x0000003d
+ 0x00020003 0x00000049
+ 0x00020004 0x00000056
+ 0x00020005 0x00000061
+ 0x00020006 0x0000006d
+
+ 0x00030000 0x00000021
+ 0x00030001 0x0000002a
+ 0x00030002 0x0000003c
+ 0x00030003 0x0000004e>;
+ little-endian;
+ #thermal-sensor-cells = <1>;
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+
+ thermal-sensors = <&tmu 4>;
+
+ trips {
+ cpu_alert: cpu-alert {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit: cpu-crit {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu2 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ map2 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu4 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ map3 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu6 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
serial0: serial@21c0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21c0500 0x0 0x100>;
--
2.1.0.27.g96db324
next prev parent reply other threads:[~2016-06-03 7:23 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-03 6:57 [PATCH 1/7] dt-bindings: Update QorIQ TMU thermal bindings Jia Hongtao
2016-06-03 6:57 ` [PATCH 2/7] powerpc/mpc85xx: Update TMU device tree node for T1040/T1042 Jia Hongtao
2016-06-03 6:57 ` [PATCH 3/7] powerpc/mpc85xx: Update TMU device tree node for T1023/T1024 Jia Hongtao
2016-06-03 6:57 ` [PATCH 4/7] arm:dt:ls1021a: Add TMU device tree support for LS1021A Jia Hongtao
2016-06-03 6:57 ` [PATCH 5/7] arm64:dt:ls1043a: Add TMU device tree support for LS1043A Jia Hongtao
2016-06-03 6:57 ` Jia Hongtao [this message]
2016-06-03 6:57 ` [PATCH 7/7] thermal: qoriq: Add thermal management support Jia Hongtao
2016-06-05 17:51 ` kbuild test robot
2016-06-06 13:47 ` [PATCH 1/7] dt-bindings: Update QorIQ TMU thermal bindings Rob Herring
2016-06-07 2:26 ` 答复: " Hongtao Jia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1464937059-19349-6-git-send-email-hongtao.jia@nxp.com \
--to=hongtao.jia@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=edubezval@gmail.com \
--cc=galak@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=scott.wood@nxp.com \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).