From: Madalin Bucur <madalin.bucur@nxp.com>
To: <devicetree@vger.kernel.org>
Cc: <linuxppc-dev@lists.ozlabs.org>, <mpe@ellerman.id.au>,
<oss@buserror.net>
Subject: [PATCH 1/3] powerpc/fsl/dts: add QMan and BMan portal nodes on t1023rdb
Date: Fri, 11 Nov 2016 15:59:42 +0200 [thread overview]
Message-ID: <1478872784-630-1-git-send-email-madalin.bucur@nxp.com> (raw)
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
---
arch/powerpc/boot/dts/fsl/t1023rdb.dts | 27 ++++++++
arch/powerpc/boot/dts/fsl/t1023si-post.dtsi | 103 ++++++++++++++++++++++++++++
2 files changed, 130 insertions(+)
diff --git a/arch/powerpc/boot/dts/fsl/t1023rdb.dts b/arch/powerpc/boot/dts/fsl/t1023rdb.dts
index 2975762..24c9de3 100644
--- a/arch/powerpc/boot/dts/fsl/t1023rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1023rdb.dts
@@ -41,6 +41,25 @@
#size-cells = <2>;
interrupt-parent = <&mpic>;
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ bman_fbpr: bman-fbpr {
+ size = <0 0x1000000>;
+ alignment = <0 0x1000000>;
+ };
+ qman_fqd: qman-fqd {
+ size = <0 0x400000>;
+ alignment = <0 0x400000>;
+ };
+ qman_pfdr: qman-pfdr {
+ size = <0 0x2000000>;
+ alignment = <0 0x2000000>;
+ };
+ };
+
ifc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x2000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
@@ -72,6 +91,14 @@
ranges = <0x00000000 0xf 0x00000000 0x01072000>;
};
+ bportals: bman-portals@ff4000000 {
+ ranges = <0x0 0xf 0xf4000000 0x2000000>;
+ };
+
+ qportals: qman-portals@ff6000000 {
+ ranges = <0x0 0xf 0xf6000000 0x2000000>;
+ };
+
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
diff --git a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
index 6e0b489..da2894c 100644
--- a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
@@ -34,6 +34,21 @@
#include <dt-bindings/thermal/thermal.h>
+&bman_fbpr {
+ compatible = "fsl,bman-fbpr";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_fqd {
+ compatible = "fsl,qman-fqd";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+ compatible = "fsl,qman-pfdr";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+
&ifc {
#address-cells = <2>;
#size-cells = <1>;
@@ -180,6 +195,92 @@
};
};
+&bportals {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ compatible = "simple-bus";
+
+ bman-portal@0 {
+ cell-index = <0x0>;
+ compatible = "fsl,bman-portal";
+ reg = <0x0 0x4000>, <0x1000000 0x1000>;
+ interrupts = <105 2 0 0>;
+ };
+ bman-portal@4000 {
+ cell-index = <0x1>;
+ compatible = "fsl,bman-portal";
+ reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+ interrupts = <107 2 0 0>;
+ };
+ bman-portal@8000 {
+ cell-index = <2>;
+ compatible = "fsl,bman-portal";
+ reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+ interrupts = <109 2 0 0>;
+ };
+ bman-portal@c000 {
+ cell-index = <0x3>;
+ compatible = "fsl,bman-portal";
+ reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+ interrupts = <111 2 0 0>;
+ };
+ bman-portal@10000 {
+ cell-index = <0x4>;
+ compatible = "fsl,bman-portal";
+ reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+ interrupts = <113 2 0 0>;
+ };
+ bman-portal@14000 {
+ cell-index = <0x5>;
+ compatible = "fsl,bman-portal";
+ reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+ interrupts = <115 2 0 0>;
+ };
+};
+
+&qportals {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ compatible = "simple-bus";
+
+ qportal0: qman-portal@0 {
+ compatible = "fsl,qman-portal";
+ reg = <0x0 0x4000>, <0x1000000 0x1000>;
+ interrupts = <104 0x2 0 0>;
+ cell-index = <0x0>;
+ };
+ qportal1: qman-portal@4000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+ interrupts = <106 0x2 0 0>;
+ cell-index = <0x1>;
+ };
+ qportal2: qman-portal@8000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+ interrupts = <108 0x2 0 0>;
+ cell-index = <0x2>;
+ };
+ qportal3: qman-portal@c000 {
+ compatible = "fsl,qman-portal";
+ reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+ interrupts = <110 0x2 0 0>;
+ cell-index = <0x3>;
+ };
+ qportal4: qman-portal@10000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+ interrupts = <112 0x2 0 0>;
+ cell-index = <0x4>;
+ };
+ qportal5: qman-portal@14000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+ interrupts = <114 0x2 0 0>;
+ cell-index = <0x5>;
+ };
+};
+
&soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -413,6 +514,8 @@
};
/include/ "qoriq-sec5.0-0.dtsi"
+/include/ "qoriq-qman3.dtsi"
+/include/ "qoriq-bman1.dtsi"
/include/ "qoriq-fman3l-0.dtsi"
/include/ "qoriq-fman3-0-10g-0-best-effort.dtsi"
--
2.1.0
next reply other threads:[~2016-11-11 13:59 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-11 13:59 Madalin Bucur [this message]
2016-11-11 13:59 ` [PATCH 2/3] powerpc/fsl/dts: add QMan and BMan portal nodes on t1024 Madalin Bucur
2016-11-11 13:59 ` [PATCH 3/3] powerpc/fsl/dts: add FMan node for t1042d4rdb Madalin Bucur
2016-11-11 15:53 [PATCH 1/3] powerpc/fsl/dts: add QMan and BMan portal nodes on t1023rdb Madalin Bucur
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1478872784-630-1-git-send-email-madalin.bucur@nxp.com \
--to=madalin.bucur@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=oss@buserror.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).