linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Roy Pledge <roy.pledge@nxp.com>
To: <robin.murphy@arm.com>, <oss@buserror.net>,
	<linuxppc-dev@lists.ozlabs.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>
Cc: <madalin.bucur@nxp.com>, Roy Pledge <roy.pledge@nxp.com>
Subject: [RFC PATCH 2/5] soc/fsl/qbman: Use shared-dma-pool for QMan private memory allocations
Date: Wed, 29 Mar 2017 17:13:54 -0400	[thread overview]
Message-ID: <1490822037-6752-3-git-send-email-roy.pledge@nxp.com> (raw)
In-Reply-To: <1490822037-6752-1-git-send-email-roy.pledge@nxp.com>

Use the shared-memory-pool mechanism for frame queue descriptor and
packed frame descriptor record area allocations.

Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
---
 drivers/soc/fsl/qbman/qman_ccsr.c | 119 +++++++++++++++++++++-----------------
 drivers/soc/fsl/qbman/qman_priv.h |   4 +-
 drivers/soc/fsl/qbman/qman_test.h |   2 -
 3 files changed, 68 insertions(+), 57 deletions(-)

diff --git a/drivers/soc/fsl/qbman/qman_ccsr.c b/drivers/soc/fsl/qbman/qman_ccsr.c
index 90bc40c..35c59ca 100644
--- a/drivers/soc/fsl/qbman/qman_ccsr.c
+++ b/drivers/soc/fsl/qbman/qman_ccsr.c
@@ -400,63 +400,19 @@ static int qm_init_pfdr(struct device *dev, u32 pfdr_start, u32 num)
 	return -ENODEV;
 }
 
-/*
- * Ideally we would use the DMA API to turn rmem->base into a DMA address
- * (especially if iommu translations ever get involved).  Unfortunately, the
- * DMA API currently does not allow mapping anything that is not backed with
- * a struct page.
- */
+/* QMan needs two global memory areas initialized at boot time:
+    1) FQD: Frame Queue Descriptors used to manage frame queues
+    2) PFDR: Packed Frame Queue Descriptor Records used to store frames
+   Both areas are reserved using the device tree reserved memory framework
+   and the addresses and sizes are initialized when the QMan device is probed */
 static dma_addr_t fqd_a, pfdr_a;
 static size_t fqd_sz, pfdr_sz;
 
-static int qman_fqd(struct reserved_mem *rmem)
-{
-	fqd_a = rmem->base;
-	fqd_sz = rmem->size;
-
-	WARN_ON(!(fqd_a && fqd_sz));
-
-	return 0;
-}
-RESERVEDMEM_OF_DECLARE(qman_fqd, "fsl,qman-fqd", qman_fqd);
-
-static int qman_pfdr(struct reserved_mem *rmem)
-{
-	pfdr_a = rmem->base;
-	pfdr_sz = rmem->size;
-
-	WARN_ON(!(pfdr_a && pfdr_sz));
-
-	return 0;
-}
-RESERVEDMEM_OF_DECLARE(qman_pfdr, "fsl,qman-pfdr", qman_pfdr);
-
 static unsigned int qm_get_fqid_maxcnt(void)
 {
 	return fqd_sz / 64;
 }
 
-/*
- * Flush this memory range from data cache so that QMAN originated
- * transactions for this memory region could be marked non-coherent.
- */
-static int zero_priv_mem(struct device *dev, struct device_node *node,
-			 phys_addr_t addr, size_t sz)
-{
-	/* map as cacheable, non-guarded */
-	void __iomem *tmpp = ioremap_prot(addr, sz, 0);
-
-	if (!tmpp)
-		return -ENOMEM;
-
-	memset_io(tmpp, 0, sz);
-	flush_dcache_range((unsigned long)tmpp,
-			   (unsigned long)tmpp + sz);
-	iounmap(tmpp);
-
-	return 0;
-}
-
 static void log_edata_bits(struct device *dev, u32 bit_count)
 {
 	u32 i, j, mask = 0xffffffff;
@@ -687,11 +643,12 @@ static int qman_resource_init(struct device *dev)
 static int fsl_qman_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct device_node *node = dev->of_node;
+	struct device_node *mem_node, *node = dev->of_node;
 	struct resource *res;
 	int ret, err_irq;
 	u16 id;
 	u8 major, minor;
+	u64 size;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
@@ -727,10 +684,66 @@ static int fsl_qman_probe(struct platform_device *pdev)
 		qm_channel_caam = QMAN_CHANNEL_CAAM_REV3;
 	}
 
-	ret = zero_priv_mem(dev, node, fqd_a, fqd_sz);
-	WARN_ON(ret);
-	if (ret)
+	/* Order of memory regions is assumed as FQD followed by PFDR
+	   in order to ensure allocations from the correct regions the
+	   driver initializes then allocates each piece in order */
+
+	ret = of_reserved_mem_device_init_by_idx(dev, dev->of_node, 0);
+	if (ret) {
+		dev_err(dev, "of_reserved_mem_device_init_by_idx(0) failed 0x%x\n",
+			ret);
+		return -ENODEV;
+	}
+	mem_node = of_parse_phandle(dev->of_node, "memory-region", 0);
+	if (mem_node) {
+		ret = of_property_read_u64(mem_node, "size", &size);
+		if (ret) {
+			dev_err(dev, "FQD: of_address_to_resource fails 0x%x\n", ret);
+			return -ENODEV;
+		}
+		fqd_sz = size;
+	} else {
+		dev_err(dev, "No memory-region found for FQD\n");
+		return -ENODEV;
+	}
+	if (!dma_zalloc_coherent(dev, fqd_sz, &fqd_a, 0)) {
+		dev_err(dev, "Alloc FQD memory failed\n");
+		return -ENODEV;
+	}
+
+	dev_info(dev, "Allocated FQD 0x%llx 0x%zx\n", fqd_a, fqd_sz);
+
+	/* Disassociate the FQD reseverd memory area from the device because
+	   a device can only have one DMA memory area. This should be fine
+	   since the memory is allocated and initalized and only ever accessed
+	   by the QMan device from now on */
+	of_reserved_mem_device_release(dev);
+
+	/* Setup PFDR memory */
+	ret = of_reserved_mem_device_init_by_idx(dev, dev->of_node, 1);
+	if (ret) {
+		dev_err(dev, "of_reserved_mem_device_init(1) failed 0x%x\n",
+			ret);
+		return -ENODEV;
+	}
+	mem_node = of_parse_phandle(dev->of_node, "memory-region", 1);
+	if (mem_node) {
+		ret = of_property_read_u64(mem_node, "size", &size);
+		if (ret) {
+			dev_err(dev, "PFDR: of_address_to_resource fails 0x%x\n", ret);
+			return -ENODEV;
+		}
+		pfdr_sz = size;
+	} else {
+		dev_err(dev, "No memory-region found for PFDR\n");
+		return -ENODEV;
+	}
+	if (!dma_zalloc_coherent(dev, pfdr_sz, &pfdr_a, 0)) {
+		dev_err(dev, "Alloc PFDR Failed size 0x%zx\n", pfdr_sz);
 		return -ENODEV;
+	}
+
+	dev_info(dev, "Allocated PFDR 0x%llx 0x%zx\n", pfdr_a, pfdr_sz);
 
 	ret = qman_init_ccsr(dev);
 	if (ret) {
diff --git a/drivers/soc/fsl/qbman/qman_priv.h b/drivers/soc/fsl/qbman/qman_priv.h
index 22725bd..1e998ea5 100644
--- a/drivers/soc/fsl/qbman/qman_priv.h
+++ b/drivers/soc/fsl/qbman/qman_priv.h
@@ -28,12 +28,12 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
 #include "dpaa_sys.h"
 
 #include <soc/fsl/qman.h>
 #include <linux/iommu.h>
+#include <linux/dma-contiguous.h>
+#include <linux/of_address.h>
 
 #if defined(CONFIG_FSL_PAMU)
 #include <asm/fsl_pamu_stash.h>
diff --git a/drivers/soc/fsl/qbman/qman_test.h b/drivers/soc/fsl/qbman/qman_test.h
index d5f8cb2..41bdbc48 100644
--- a/drivers/soc/fsl/qbman/qman_test.h
+++ b/drivers/soc/fsl/qbman/qman_test.h
@@ -30,7 +30,5 @@
 
 #include "qman_priv.h"
 
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
 int qman_test_stash(void);
 int qman_test_api(void);
-- 
2.9.3

  parent reply	other threads:[~2017-03-29 21:14 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-29 21:13 [RFC PATCH 0/5] soc/fsl/qbman: Rework private memory allocations Roy Pledge
2017-03-29 21:13 ` [RFC PATCH 1/5] soc/fsl/qbman: Use shared-dma-pool for BMan " Roy Pledge
2017-03-29 21:13 ` Roy Pledge [this message]
2017-03-30 14:09   ` [RFC PATCH 2/5] soc/fsl/qbman: Use shared-dma-pool for QMan " Robin Murphy
2017-03-31  3:27     ` Michael Ellerman
2017-03-31 17:55       ` Robin Murphy
2017-04-01  7:25         ` Scott Wood
2017-04-03 14:52           ` Robin Murphy
2017-04-04  0:24             ` Scott Wood
2017-03-29 21:13 ` [RFC PATCH 3/5] dts: arch/powerpc: Update Freescale DTS for QBMan " Roy Pledge
2017-03-29 21:13 ` [RFC PATCH 4/5] dt-bindings: soc/fsl: Update reserved memory binding for QBMan Roy Pledge
2017-04-03 15:42   ` Rob Herring
2017-04-03 19:49     ` Roy Pledge
2017-04-04  0:32       ` Scott Wood
2017-03-29 21:13 ` [RFC PATCH 5/5] powerpc: Add HAVE_GENERIC_DMA_COHERENT options to Kconfig Roy Pledge

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1490822037-6752-3-git-send-email-roy.pledge@nxp.com \
    --to=roy.pledge@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=madalin.bucur@nxp.com \
    --cc=oss@buserror.net \
    --cc=robin.murphy@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).