linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Madalin Bucur <madalin.bucur@nxp.com>
To: davem@davemloft.net, netdev@vger.kernel.org
Cc: Madalin Bucur <madalin.bucur@nxp.com>,
	roy.pledge@nxp.com, linux-kernel@vger.kernel.org,
	leoyang.li@nxp.com, linuxppc-dev@lists.ozlabs.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 3/3] dpaa_eth: add ethtool coalesce control
Date: Wed, 21 Nov 2018 13:41:09 +0200	[thread overview]
Message-ID: <1542800469-6802-4-git-send-email-madalin.bucur@nxp.com> (raw)
In-Reply-To: <1542800469-6802-1-git-send-email-madalin.bucur@nxp.com>

Allow ethtool control of the DPAA QMan portal interrupt coalescing
settings.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
---
 drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c | 71 ++++++++++++++++++++++
 1 file changed, 71 insertions(+)

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c b/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
index 13d6e2272ece..62497119c85f 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
@@ -529,6 +529,75 @@ static int dpaa_get_ts_info(struct net_device *net_dev,
 	return 0;
 }
 
+static int dpaa_get_coalesce(struct net_device *dev,
+			     struct ethtool_coalesce *c)
+{
+	struct qman_portal *portal;
+	u32 period;
+	u8 thresh;
+
+	portal = qman_get_affine_portal(smp_processor_id());
+	qman_portal_get_iperiod(portal, &period);
+	qman_dqrr_get_ithresh(portal, &thresh);
+
+	c->rx_coalesce_usecs = period;
+	c->rx_max_coalesced_frames = thresh;
+	c->use_adaptive_rx_coalesce = false;
+
+	return 0;
+}
+
+static int dpaa_set_coalesce(struct net_device *dev,
+			     struct ethtool_coalesce *c)
+{
+	const cpumask_t *cpus = qman_affine_cpus();
+	bool needs_revert[NR_CPUS] = {false};
+	struct qman_portal *portal;
+	u32 period, prev_period;
+	u8 thresh, prev_thresh;
+	int cpu, res;
+
+	if (c->use_adaptive_rx_coalesce)
+		return -EINVAL;
+
+	period = c->rx_coalesce_usecs;
+	thresh = c->rx_max_coalesced_frames;
+
+	/* save previous values */
+	portal = qman_get_affine_portal(smp_processor_id());
+	qman_portal_get_iperiod(portal, &prev_period);
+	qman_dqrr_get_ithresh(portal, &prev_thresh);
+
+	/* set new values */
+	for_each_cpu(cpu, cpus) {
+		portal = qman_get_affine_portal(cpu);
+		res = qman_portal_set_iperiod(portal, period);
+		if (res)
+			goto revert_values;
+		res = qman_dqrr_set_ithresh(portal, thresh);
+		if (res) {
+			qman_portal_set_iperiod(portal, prev_period);
+			goto revert_values;
+		}
+		needs_revert[cpu] = true;
+	}
+
+	return 0;
+
+revert_values:
+	/* restore previous values */
+	for_each_cpu(cpu, cpus) {
+		if (!needs_revert[cpu])
+			continue;
+		portal = qman_get_affine_portal(cpu);
+		/* previous values will not fail, ignore return value */
+		qman_portal_set_iperiod(portal, prev_period);
+		qman_dqrr_set_ithresh(portal, prev_thresh);
+	}
+
+	return res;
+}
+
 const struct ethtool_ops dpaa_ethtool_ops = {
 	.get_drvinfo = dpaa_get_drvinfo,
 	.get_msglevel = dpaa_get_msglevel,
@@ -545,4 +614,6 @@ const struct ethtool_ops dpaa_ethtool_ops = {
 	.get_rxnfc = dpaa_get_rxnfc,
 	.set_rxnfc = dpaa_set_rxnfc,
 	.get_ts_info = dpaa_get_ts_info,
+	.get_coalesce = dpaa_get_coalesce,
+	.set_coalesce = dpaa_set_coalesce,
 };
-- 
2.1.0


  parent reply	other threads:[~2018-11-21 11:50 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-21 11:41 [PATCH v3 0/3] dpaa_eth: add ethtool coalesce control Madalin Bucur
2018-11-21 11:41 ` [PATCH v3 1/3] soc: fsl: qbman: read ithresh from HW Madalin Bucur
2018-11-21 11:41 ` [PATCH v3 2/3] soc/qman: add return value to interrupt coalesce changing APIs Madalin Bucur
2018-11-21 11:41 ` Madalin Bucur [this message]
2018-11-23 19:17 ` [PATCH v3 0/3] dpaa_eth: add ethtool coalesce control David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1542800469-6802-4-git-send-email-madalin.bucur@nxp.com \
    --to=madalin.bucur@nxp.com \
    --cc=davem@davemloft.net \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=netdev@vger.kernel.org \
    --cc=roy.pledge@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).