linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Hari Bathini <hbathini@linux.ibm.com>
To: linuxppc-dev <linuxppc-dev@ozlabs.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.ibm.com>,
	Mahesh J Salgaonkar <mahesh@linux.ibm.com>,
	Vasant Hegde <hegdevasant@linux.ibm.com>,
	Oliver <oohall@gmail.com>, Nicholas Piggin <npiggin@gmail.com>,
	Stewart Smith <stewart@linux.ibm.com>,
	Daniel Axtens <dja@axtens.net>
Subject: [PATCH v4 01/25] powerpc/fadump: move internal macros/definitions to a new header
Date: Tue, 16 Jul 2019 17:02:00 +0530	[thread overview]
Message-ID: <156327672082.27462.6309970021080268079.stgit@hbathini.in.ibm.com> (raw)
In-Reply-To: <156327668777.27462.5297279227799429100.stgit@hbathini.in.ibm.com>

Though asm/fadump.h is meant to be used by other components dealing
with FADump, it also has macros/definitions internal to FADump code.
Move them to a new header file used within FADump code. This also
makes way for refactoring platform specific FADump code.

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
---
 arch/powerpc/include/asm/fadump.h   |   71 ---------------------------
 arch/powerpc/kernel/fadump-common.h |   93 +++++++++++++++++++++++++++++++++++
 arch/powerpc/kernel/fadump.c        |    2 +
 3 files changed, 95 insertions(+), 71 deletions(-)
 create mode 100644 arch/powerpc/kernel/fadump-common.h

diff --git a/arch/powerpc/include/asm/fadump.h b/arch/powerpc/include/asm/fadump.h
index 17d9b6a..75179497 100644
--- a/arch/powerpc/include/asm/fadump.h
+++ b/arch/powerpc/include/asm/fadump.h
@@ -11,34 +11,6 @@
 
 #ifdef CONFIG_FA_DUMP
 
-/*
- * The RMA region will be saved for later dumping when kernel crashes.
- * RMA is Real Mode Area, the first block of logical memory address owned
- * by logical partition, containing the storage that may be accessed with
- * translate off.
- */
-#define RMA_START	0x0
-#define RMA_END		(ppc64_rma_size)
-
-/*
- * On some Power systems where RMO is 128MB, it still requires minimum of
- * 256MB for kernel to boot successfully. When kdump infrastructure is
- * configured to save vmcore over network, we run into OOM issue while
- * loading modules related to network setup. Hence we need aditional 64M
- * of memory to avoid OOM issue.
- */
-#define MIN_BOOT_MEM	(((RMA_END < (0x1UL << 28)) ? (0x1UL << 28) : RMA_END) \
-			+ (0x1UL << 26))
-
-/* The upper limit percentage for user specified boot memory size (25%) */
-#define MAX_BOOT_MEM_RATIO			4
-
-#define memblock_num_regions(memblock_type)	(memblock.memblock_type.cnt)
-
-/* Alignement per CMA requirement. */
-#define FADUMP_CMA_ALIGNMENT	(PAGE_SIZE <<				\
-			max_t(unsigned long, MAX_ORDER - 1, pageblock_order))
-
 /* Firmware provided dump sections */
 #define FADUMP_CPU_STATE_DATA	0x0001
 #define FADUMP_HPTE_REGION	0x0002
@@ -47,11 +19,6 @@
 /* Dump request flag */
 #define FADUMP_REQUEST_FLAG	0x00000001
 
-/* FAD commands */
-#define FADUMP_REGISTER		1
-#define FADUMP_UNREGISTER	2
-#define FADUMP_INVALIDATE	3
-
 /* Dump status flag */
 #define FADUMP_ERROR_FLAG	0x2000
 
@@ -112,29 +79,6 @@ struct fadump_mem_struct {
 	struct fadump_section		rmr_region;
 };
 
-/* Firmware-assisted dump configuration details. */
-struct fw_dump {
-	unsigned long	cpu_state_data_size;
-	unsigned long	hpte_region_size;
-	unsigned long	boot_memory_size;
-	unsigned long	reserve_dump_area_start;
-	unsigned long	reserve_dump_area_size;
-	/* cmd line option during boot */
-	unsigned long	reserve_bootvar;
-
-	unsigned long	fadumphdr_addr;
-	unsigned long	cpu_notes_buf;
-	unsigned long	cpu_notes_buf_size;
-
-	int		ibm_configure_kernel_dump;
-
-	unsigned long	fadump_enabled:1;
-	unsigned long	fadump_supported:1;
-	unsigned long	dump_active:1;
-	unsigned long	dump_registered:1;
-	unsigned long	nocma:1;
-};
-
 /*
  * Copy the ascii values for first 8 characters from a string into u64
  * variable at their respective indexes.
@@ -153,7 +97,6 @@ static inline u64 str_to_u64(const char *str)
 #define STR_TO_HEX(x)	str_to_u64(x)
 #define REG_ID(x)	str_to_u64(x)
 
-#define FADUMP_CRASH_INFO_MAGIC		STR_TO_HEX("FADMPINF")
 #define REGSAVE_AREA_MAGIC		STR_TO_HEX("REGSAVE")
 
 /* The firmware-assisted dump format.
@@ -178,20 +121,6 @@ struct fadump_reg_entry {
 	__be64		reg_value;
 };
 
-/* fadump crash info structure */
-struct fadump_crash_info_header {
-	u64		magic_number;
-	u64		elfcorehdr_addr;
-	u32		crashing_cpu;
-	struct pt_regs	regs;
-	struct cpumask	online_mask;
-};
-
-struct fad_crash_memory_ranges {
-	unsigned long long	base;
-	unsigned long long	size;
-};
-
 extern int is_fadump_memory_area(u64 addr, ulong size);
 extern int early_init_dt_scan_fw_dump(unsigned long node,
 		const char *uname, int depth, void *data);
diff --git a/arch/powerpc/kernel/fadump-common.h b/arch/powerpc/kernel/fadump-common.h
new file mode 100644
index 0000000..ba65e69
--- /dev/null
+++ b/arch/powerpc/kernel/fadump-common.h
@@ -0,0 +1,93 @@
+/*
+ * Firmware-Assisted Dump internal code.
+ *
+ * Copyright 2011, IBM Corporation
+ * Author: Mahesh Salgaonkar <mahesh@linux.ibm.com>
+ *
+ * Copyright 2019, IBM Corp.
+ * Author: Hari Bathini <hbathini@linux.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __PPC64_FA_DUMP_INTERNAL_H__
+#define __PPC64_FA_DUMP_INTERNAL_H__
+
+/*
+ * The RMA region will be saved for later dumping when kernel crashes.
+ * RMA is Real Mode Area, the first block of logical memory address owned
+ * by logical partition, containing the storage that may be accessed with
+ * translate off.
+ */
+#define RMA_START	0x0
+#define RMA_END		(ppc64_rma_size)
+
+/*
+ * On some Power systems where RMO is 128MB, it still requires minimum of
+ * 256MB for kernel to boot successfully. When kdump infrastructure is
+ * configured to save vmcore over network, we run into OOM issue while
+ * loading modules related to network setup. Hence we need additional 64M
+ * of memory to avoid OOM issue.
+ */
+#define MIN_BOOT_MEM	(((RMA_END < (0x1UL << 28)) ? (0x1UL << 28) : RMA_END) \
+			+ (0x1UL << 26))
+
+/* The upper limit percentage for user specified boot memory size (25%) */
+#define MAX_BOOT_MEM_RATIO			4
+
+#define memblock_num_regions(memblock_type)	(memblock.memblock_type.cnt)
+
+/* Alignment per CMA requirement. */
+#define FADUMP_CMA_ALIGNMENT	(PAGE_SIZE <<				\
+				 max_t(unsigned long, MAX_ORDER - 1,	\
+				 pageblock_order))
+
+/* FAD commands */
+#define FADUMP_REGISTER			1
+#define FADUMP_UNREGISTER		2
+#define FADUMP_INVALIDATE		3
+
+#define FADUMP_CRASH_INFO_MAGIC		str_to_u64("FADMPINF")
+
+/* fadump crash info structure */
+struct fadump_crash_info_header {
+	u64		magic_number;
+	u64		elfcorehdr_addr;
+	u32		crashing_cpu;
+	struct pt_regs	regs;
+	struct cpumask	online_mask;
+};
+
+struct fad_crash_memory_ranges {
+	unsigned long long	base;
+	unsigned long long	size;
+};
+
+/* Firmware-assisted dump configuration details. */
+struct fw_dump {
+	unsigned long	reserve_dump_area_start;
+	unsigned long	reserve_dump_area_size;
+	/* cmd line option during boot */
+	unsigned long	reserve_bootvar;
+
+	unsigned long	cpu_state_data_size;
+	unsigned long	hpte_region_size;
+	unsigned long	boot_memory_size;
+
+	unsigned long	fadumphdr_addr;
+	unsigned long	cpu_notes_buf;
+	unsigned long	cpu_notes_buf_size;
+
+	int		ibm_configure_kernel_dump;
+
+	unsigned long	fadump_enabled:1;
+	unsigned long	fadump_supported:1;
+	unsigned long	dump_active:1;
+	unsigned long	dump_registered:1;
+	unsigned long	nocma:1;
+};
+
+#endif /* __PPC64_FA_DUMP_INTERNAL_H__ */
diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c
index a784695..4c3b874 100644
--- a/arch/powerpc/kernel/fadump.c
+++ b/arch/powerpc/kernel/fadump.c
@@ -32,6 +32,8 @@
 #include <asm/fadump.h>
 #include <asm/setup.h>
 
+#include "fadump-common.h"
+
 static struct fw_dump fw_dump;
 static struct fadump_mem_struct fdm;
 static const struct fadump_mem_struct *fdm_active;


  reply	other threads:[~2019-07-16 11:36 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-16 11:31 [PATCH v4 00/25] Add FADump support on PowerNV platform Hari Bathini
2019-07-16 11:32 ` Hari Bathini [this message]
2019-07-16 11:32 ` [PATCH v4 02/25] powerpc/fadump: move internal code to a new file Hari Bathini
2019-07-16 11:32 ` [PATCH v4 03/25] powerpc/fadump: Improve fadump documentation Hari Bathini
2019-08-12  6:55   ` Mahesh Jagannath Salgaonkar
2019-07-16 11:32 ` [PATCH v4 04/25] pseries/fadump: move rtas specific definitions to platform code Hari Bathini
2019-07-16 11:32 ` [PATCH v4 05/25] pseries/fadump: introduce callbacks for platform specific operations Hari Bathini
2019-08-12  9:42   ` Mahesh J Salgaonkar
2019-08-14  6:39     ` Hari Bathini
2019-07-16 11:32 ` [PATCH v4 06/25] pseries/fadump: define register/un-register callback functions Hari Bathini
2019-08-12 16:01   ` Mahesh J Salgaonkar
2019-08-14  6:41     ` Hari Bathini
2019-07-16 11:32 ` [PATCH v4 07/25] pseries/fadump: move out platform specific support from generic code Hari Bathini
2019-08-13  5:16   ` Mahesh J Salgaonkar
2019-07-16 11:32 ` [PATCH v4 08/25] powerpc/fadump: use FADump instead of fadump for how it is pronounced Hari Bathini
2019-07-16 11:33 ` [PATCH v4 09/25] opal: add MPIPL interface definitions Hari Bathini
2019-07-16 11:33 ` [PATCH v4 10/25] powernv/fadump: add fadump support on powernv Hari Bathini
2019-07-16 11:33 ` [PATCH v4 11/25] powernv/fadump: register kernel metadata address with opal Hari Bathini
2019-08-13 10:41   ` Mahesh J Salgaonkar
2019-08-14  7:06     ` Hari Bathini
2019-08-14 10:21       ` Mahesh Jagannath Salgaonkar
2019-08-19 15:49         ` Hari Bathini
2019-07-16 11:33 ` [PATCH v4 12/25] powernv/fadump: define register/un-register callback functions Hari Bathini
2019-08-13 14:34   ` Mahesh J Salgaonkar
2019-08-14  7:11     ` Hari Bathini
2019-07-16 11:33 ` [PATCH v4 13/25] powernv/fadump: support copying multiple kernel memory regions Hari Bathini
2019-08-13 15:03   ` Mahesh J Salgaonkar
2019-08-14  7:14     ` Hari Bathini
2019-07-16 11:33 ` [PATCH v4 14/25] powernv/fadump: process the crashdump by exporting it as /proc/vmcore Hari Bathini
2019-08-14 10:18   ` Mahesh J Salgaonkar
2019-08-14 11:11     ` Hari Bathini
2019-07-16 11:33 ` [PATCH v4 15/25] powerpc/fadump: Update documentation about OPAL platform support Hari Bathini
2019-07-16 11:33 ` [PATCH v4 16/25] powerpc/fadump: consider reserved ranges while reserving memory Hari Bathini
2019-07-16 11:34 ` [PATCH v4 17/25] powerpc/fadump: consider reserved ranges while releasing memory Hari Bathini
2019-07-16 11:34 ` [PATCH v4 18/25] powernv/fadump: process architected register state data provided by firmware Hari Bathini
2019-08-14 17:15   ` Mahesh J Salgaonkar
2019-08-16  2:38     ` Hari Bathini
2019-07-16 11:34 ` [PATCH v4 19/25] powernv/fadump: add support to preserve crash data on FADUMP disabled kernel Hari Bathini
2019-08-16  5:01   ` Mahesh J Salgaonkar
2019-07-16 11:34 ` [PATCH v4 20/25] powerpc/fadump: update documentation about CONFIG_PRESERVE_FA_DUMP Hari Bathini
2019-07-16 11:34 ` [PATCH v4 21/25] powernv/opalcore: export /sys/firmware/opal/core for analysing opal crashes Hari Bathini
2019-07-16 11:34 ` [PATCH v4 22/25] powernv/fadump: Warn before processing partial crashdump Hari Bathini
2019-08-16  5:59   ` Mahesh J Salgaonkar
2019-07-16 11:34 ` [PATCH v4 23/25] powernv/opalcore: provide an option to invalidate /sys/firmware/opal/core file Hari Bathini
2019-07-16 11:34 ` [PATCH v4 24/25] powernv/fadump: consider f/w load area Hari Bathini
2019-07-16 11:35 ` [PATCH v4 25/25] powernv/fadump: update documentation about option to release opalcore Hari Bathini
2019-07-19  6:19 ` [PATCH v4 00/25] Add FADump support on PowerNV platform Hari Bathini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=156327672082.27462.6309970021080268079.stgit@hbathini.in.ibm.com \
    --to=hbathini@linux.ibm.com \
    --cc=ananth@linux.ibm.com \
    --cc=dja@axtens.net \
    --cc=hegdevasant@linux.ibm.com \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=mahesh@linux.ibm.com \
    --cc=npiggin@gmail.com \
    --cc=oohall@gmail.com \
    --cc=stewart@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).