From: Hari Bathini <hbathini@linux.ibm.com>
To: linuxppc-dev <linuxppc-dev@ozlabs.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.ibm.com>,
Mahesh J Salgaonkar <mahesh@linux.ibm.com>,
Vasant Hegde <hegdevasant@linux.ibm.com>,
Oliver <oohall@gmail.com>, Nicholas Piggin <npiggin@gmail.com>,
Daniel Axtens <dja@axtens.net>
Subject: [PATCH v5 24/31] powerpc/fadump: improve how crashed kernel's memory is reserved
Date: Tue, 20 Aug 2019 17:37:05 +0530 [thread overview]
Message-ID: <156630282529.8896.1590882092846939802.stgit@hbathini.in.ibm.com> (raw)
In-Reply-To: <156630261682.8896.3418665808003586786.stgit@hbathini.in.ibm.com>
The size parameter to fadump_reserve_crash_area() function is not needed
as all the memory above boot memory size must be preserved anyway. Update
the function by dropping this redundant parameter.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
---
arch/powerpc/kernel/fadump.c | 53 +++++++++++++++++++++++-------------------
1 file changed, 29 insertions(+), 24 deletions(-)
diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c
index 3981599..665104a 100644
--- a/arch/powerpc/kernel/fadump.c
+++ b/arch/powerpc/kernel/fadump.c
@@ -35,6 +35,8 @@
static struct fw_dump fw_dump;
+static void __init fadump_reserve_crash_area(unsigned long base);
+
static DEFINE_MUTEX(fadump_mutex);
struct fadump_mrange_info crash_mrange_info = { "crash", NULL, 0, 0, 0 };
struct fadump_mrange_info reserved_mrange_info = { "reserved", NULL, 0, 0, 0 };
@@ -262,26 +264,6 @@ static unsigned long get_fadump_area_size(void)
return size;
}
-static void __init fadump_reserve_crash_area(unsigned long base,
- unsigned long size)
-{
- struct memblock_region *reg;
- unsigned long mstart, mend, msize;
-
- for_each_memblock(memory, reg) {
- mstart = max_t(unsigned long, base, reg->base);
- mend = reg->base + reg->size;
- mend = min(base + size, mend);
-
- if (mstart < mend) {
- msize = mend - mstart;
- memblock_reserve(mstart, msize);
- pr_info("Reserved %ldMB of memory at %#016lx for saving crash dump\n",
- (msize >> 20), mstart);
- }
- }
-}
-
int __init fadump_reserve_mem(void)
{
int ret = 1;
@@ -347,12 +329,11 @@ int __init fadump_reserve_mem(void)
#endif
/*
* If last boot has crashed then reserve all the memory
- * above boot_memory_size so that we don't touch it until
+ * above boot memory size so that we don't touch it until
* dump is written to disk by userspace tool. This memory
- * will be released for general use once the dump is saved.
+ * can be released for general use by invalidating fadump.
*/
- size = memory_boundary - base;
- fadump_reserve_crash_area(base, size);
+ fadump_reserve_crash_area(base);
pr_debug("fadumphdr_addr = %#016lx\n", fw_dump.fadumphdr_addr);
pr_debug("Reserve dump area start address: 0x%lx\n",
@@ -1240,3 +1221,27 @@ int __init setup_fadump(void)
return 1;
}
subsys_initcall(setup_fadump);
+
+/* Preserve everything above the base address */
+static void __init fadump_reserve_crash_area(unsigned long base)
+{
+ struct memblock_region *reg;
+ unsigned long mstart, msize;
+
+ for_each_memblock(memory, reg) {
+ mstart = reg->base;
+ msize = reg->size;
+
+ if ((mstart + msize) < base)
+ continue;
+
+ if (mstart < base) {
+ msize -= (base - mstart);
+ mstart = base;
+ }
+
+ pr_info("Reserving %luMB of memory at %#016lx for preserving crash data",
+ (msize >> 20), mstart);
+ memblock_reserve(mstart, msize);
+ }
+}
next prev parent reply other threads:[~2019-08-20 13:17 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-20 12:04 [PATCH v5 00/31] Add FADump support on PowerNV platform Hari Bathini
2019-08-20 12:04 ` [PATCH v5 01/31] powerpc/fadump: move internal macros/definitions to a new header Hari Bathini
2019-09-03 11:09 ` Michael Ellerman
2019-09-03 16:05 ` Hari Bathini
2019-08-20 12:04 ` [PATCH v5 02/31] powerpc/fadump: move internal code to a new file Hari Bathini
2019-09-03 11:09 ` Michael Ellerman
2019-09-03 16:05 ` Hari Bathini
2019-09-04 9:02 ` Mahesh Jagannath Salgaonkar
2019-09-04 18:26 ` Hari Bathini
2019-08-20 12:04 ` [PATCH v5 03/31] powerpc/fadump: Improve fadump documentation Hari Bathini
2019-08-20 12:04 ` [PATCH v5 04/31] pseries/fadump: move rtas specific definitions to platform code Hari Bathini
2019-08-20 12:04 ` [PATCH v5 05/31] pseries/fadump: introduce callbacks for platform specific operations Hari Bathini
2019-09-03 11:10 ` Michael Ellerman
2019-09-03 16:06 ` Hari Bathini
2019-09-06 6:39 ` Hari Bathini
2019-08-20 12:04 ` [PATCH v5 06/31] pseries/fadump: define register/un-register callback functions Hari Bathini
2019-09-03 11:10 ` Michael Ellerman
2019-09-03 17:15 ` Hari Bathini
2019-08-20 12:04 ` [PATCH v5 07/31] powerpc/fadump: release all the memory above boot memory size Hari Bathini
2019-09-03 11:10 ` Michael Ellerman
2019-09-03 16:27 ` Hari Bathini
2019-08-20 12:05 ` [PATCH v5 08/31] pseries/fadump: move out platform specific support from generic code Hari Bathini
2019-08-20 12:05 ` [PATCH v5 09/31] powerpc/fadump: use FADump instead of fadump for how it is pronounced Hari Bathini
2019-08-20 12:05 ` [PATCH v5 10/31] opal: add MPIPL interface definitions Hari Bathini
2019-09-03 11:10 ` Michael Ellerman
2019-09-03 16:28 ` Hari Bathini
2019-09-04 11:03 ` Michael Ellerman
2019-09-04 11:05 ` Michael Ellerman
2019-08-20 12:05 ` [PATCH v5 11/31] powernv/fadump: add fadump support on powernv Hari Bathini
2019-09-03 11:10 ` Michael Ellerman
2019-09-03 16:31 ` Hari Bathini
2019-09-04 14:33 ` Hari Bathini
2019-09-05 3:11 ` Michael Ellerman
2019-08-20 12:05 ` [PATCH v5 12/31] powernv/fadump: register kernel metadata address with opal Hari Bathini
2019-09-04 11:25 ` Michael Ellerman
2019-08-20 12:05 ` [PATCH v5 13/31] powernv/fadump: reset metadata address during clean up Hari Bathini
2019-08-27 12:00 ` Hari Bathini
2019-08-20 12:05 ` [PATCH v5 14/31] powernv/fadump: define register/un-register callback functions Hari Bathini
2019-09-05 4:15 ` Michael Ellerman
2019-09-05 7:23 ` Michael Ellerman
2019-09-05 9:54 ` Hari Bathini
2019-08-20 12:05 ` [PATCH v5 15/31] powernv/fadump: support copying multiple kernel boot memory regions Hari Bathini
2019-09-04 11:30 ` Michael Ellerman
2019-09-04 20:20 ` Hari Bathini
2019-09-05 3:13 ` Michael Ellerman
2019-08-20 12:06 ` [PATCH v5 16/31] powernv/fadump: process the crashdump by exporting it as /proc/vmcore Hari Bathini
2019-09-04 11:42 ` Michael Ellerman
2019-09-04 21:01 ` Hari Bathini
2019-08-20 12:06 ` [PATCH v5 17/31] powernv/fadump: Warn before processing partial crashdump Hari Bathini
2019-09-04 11:48 ` Michael Ellerman
2019-08-20 12:06 ` [PATCH v5 18/31] powernv/fadump: handle invalidation of crashdump and re-registraion Hari Bathini
2019-08-20 12:06 ` [PATCH v5 19/31] powerpc/fadump: Update documentation about OPAL platform support Hari Bathini
2019-09-04 11:51 ` Michael Ellerman
2019-09-04 12:08 ` Oliver O'Halloran
2019-09-05 3:15 ` Michael Ellerman
2019-08-20 12:06 ` [PATCH v5 20/31] powerpc/fadump: use smaller offset while finding memory for reservation Hari Bathini
2019-09-04 11:54 ` Michael Ellerman
2019-08-20 12:06 ` [PATCH v5 21/31] powernv/fadump: process architected register state data provided by firmware Hari Bathini
2019-09-04 12:20 ` Michael Ellerman
2019-09-09 13:23 ` Hari Bathini
2019-09-09 15:33 ` Oliver O'Halloran
2019-09-10 8:48 ` Hari Bathini
2019-09-10 14:05 ` Michael Ellerman
2019-09-10 16:10 ` Hari Bathini
2019-08-20 12:06 ` [PATCH v5 22/31] powerpc/fadump: make crash memory ranges array allocation generic Hari Bathini
2019-08-20 12:06 ` [PATCH v5 23/31] powerpc/fadump: consider reserved ranges while releasing memory Hari Bathini
2019-08-20 12:07 ` Hari Bathini [this message]
2019-08-20 12:07 ` [PATCH v5 25/31] powernv/fadump: add support to preserve crash data on FADUMP disabled kernel Hari Bathini
2019-08-20 12:07 ` [PATCH v5 26/31] powerpc/fadump: update documentation about CONFIG_PRESERVE_FA_DUMP Hari Bathini
2019-08-20 12:07 ` [PATCH v5 27/31] powernv/opalcore: export /sys/firmware/opal/core for analysing opal crashes Hari Bathini
2019-08-20 12:07 ` [PATCH v5 28/31] powernv/opalcore: provide an option to invalidate /sys/firmware/opal/core file Hari Bathini
2019-08-20 12:07 ` [PATCH v5 29/31] powerpc/fadump: consider f/w load area Hari Bathini
2019-08-20 12:07 ` [PATCH v5 30/31] powernv/fadump: update documentation about option to release opalcore Hari Bathini
2019-08-20 12:07 ` [PATCH v5 31/31] powernv/fadump: support holes in kernel boot memory area Hari Bathini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=156630282529.8896.1590882092846939802.stgit@hbathini.in.ibm.com \
--to=hbathini@linux.ibm.com \
--cc=ananth@linux.ibm.com \
--cc=dja@axtens.net \
--cc=hegdevasant@linux.ibm.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=mahesh@linux.ibm.com \
--cc=npiggin@gmail.com \
--cc=oohall@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).