From: Shengjiu Wang <shengjiu.wang@nxp.com>
To: timur@kernel.org, nicoleotsuka@gmail.com, Xiubo.Lee@gmail.com,
festevam@gmail.com, broonie@kernel.org,
alsa-devel@alsa-project.org, lgirdwood@gmail.com, perex@perex.cz,
tiwai@suse.com
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH] ASoC: fsl_esai: Add spin lock to protect reset and stop
Date: Wed, 23 Oct 2019 15:29:49 +0800 [thread overview]
Message-ID: <1571815789-15656-1-git-send-email-shengjiu.wang@nxp.com> (raw)
xrun may happen at the end of stream, the
trigger->fsl_esai_trigger_stop maybe called in the middle of
fsl_esai_hw_reset, this may cause esai in wrong state
after stop, and there may be endless xrun interrupt.
So Add spin lock to lock these two function.
Fixes: 7ccafa2b3879 ("ASoC: fsl_esai: recover the channel swap after xrun")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
sound/soc/fsl/fsl_esai.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
index 37b14c48b537..6a797648b66d 100644
--- a/sound/soc/fsl/fsl_esai.c
+++ b/sound/soc/fsl/fsl_esai.c
@@ -33,6 +33,7 @@
* @fsysclk: system clock source to derive HCK, SCK and FS
* @spbaclk: SPBA clock (optional, depending on SoC design)
* @task: tasklet to handle the reset operation
+ * @lock: spin lock to handle reset and stop behavior
* @fifo_depth: depth of tx/rx FIFO
* @slot_width: width of each DAI slot
* @slots: number of slots
@@ -56,6 +57,7 @@ struct fsl_esai {
struct clk *fsysclk;
struct clk *spbaclk;
struct tasklet_struct task;
+ spinlock_t lock; /* Protect reset and stop */
u32 fifo_depth;
u32 slot_width;
u32 slots;
@@ -676,8 +678,10 @@ static void fsl_esai_hw_reset(unsigned long arg)
{
struct fsl_esai *esai_priv = (struct fsl_esai *)arg;
bool tx = true, rx = false, enabled[2];
+ unsigned long lock_flags;
u32 tfcr, rfcr;
+ spin_lock_irqsave(&esai_priv->lock, lock_flags);
/* Save the registers */
regmap_read(esai_priv->regmap, REG_ESAI_TFCR, &tfcr);
regmap_read(esai_priv->regmap, REG_ESAI_RFCR, &rfcr);
@@ -715,6 +719,8 @@ static void fsl_esai_hw_reset(unsigned long arg)
fsl_esai_trigger_start(esai_priv, tx);
if (enabled[rx])
fsl_esai_trigger_start(esai_priv, rx);
+
+ spin_unlock_irqrestore(&esai_priv->lock, lock_flags);
}
static int fsl_esai_trigger(struct snd_pcm_substream *substream, int cmd,
@@ -722,6 +728,7 @@ static int fsl_esai_trigger(struct snd_pcm_substream *substream, int cmd,
{
struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai);
bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
+ unsigned long lock_flags;
esai_priv->channels[tx] = substream->runtime->channels;
@@ -734,7 +741,9 @@ static int fsl_esai_trigger(struct snd_pcm_substream *substream, int cmd,
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ spin_lock_irqsave(&esai_priv->lock, lock_flags);
fsl_esai_trigger_stop(esai_priv, tx);
+ spin_unlock_irqrestore(&esai_priv->lock, lock_flags);
break;
default:
return -EINVAL;
@@ -1002,6 +1011,7 @@ static int fsl_esai_probe(struct platform_device *pdev)
dev_set_drvdata(&pdev->dev, esai_priv);
+ spin_lock_init(&esai_priv->lock);
ret = fsl_esai_hw_init(esai_priv);
if (ret)
return ret;
--
2.21.0
next reply other threads:[~2019-10-23 7:35 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-23 7:29 Shengjiu Wang [this message]
2019-10-23 18:31 ` [PATCH] ASoC: fsl_esai: Add spin lock to protect reset and stop Nicolin Chen
2019-10-25 5:54 S.j. Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1571815789-15656-1-git-send-email-shengjiu.wang@nxp.com \
--to=shengjiu.wang@nxp.com \
--cc=Xiubo.Lee@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=festevam@gmail.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=nicoleotsuka@gmail.com \
--cc=perex@perex.cz \
--cc=timur@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).