From: Nayna Jain <nayna@linux.ibm.com> To: linuxppc-dev@ozlabs.org, linux-efi@vger.kernel.org, linux-integrity@vger.kernel.org Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>, Eric Ricther <erichte@linux.ibm.com>, Nayna Jain <nayna@linux.ibm.com>, linux-kernel@vger.kernel.org, Mimi Zohar <zohar@linux.ibm.com>, Claudio Carvalho <cclaudio@linux.ibm.com>, Matthew Garret <matthew.garret@nebula.com>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Paul Mackerras <paulus@samba.org>, Jeremy Kerr <jk@ozlabs.org>, Elaine Palmer <erpalmer@us.ibm.com>, Oliver O'Halloran <oohall@gmail.com>, George Wilson <gcwilson@linux.ibm.com> Subject: [PATCH v9 1/4] powerpc/powernv: Add OPAL API interface to access secure variable Date: Sun, 10 Nov 2019 21:10:33 -0600 Message-ID: <1573441836-3632-2-git-send-email-nayna@linux.ibm.com> (raw) In-Reply-To: <1573441836-3632-1-git-send-email-nayna@linux.ibm.com> The X.509 certificates trusted by the platform and required to secure boot the OS kernel are wrapped in secure variables, which are controlled by OPAL. This patch adds firmware/kernel interface to read and write OPAL secure variables based on the unique key. This support can be enabled using CONFIG_OPAL_SECVAR. Signed-off-by: Claudio Carvalho <cclaudio@linux.ibm.com> Signed-off-by: Nayna Jain <nayna@linux.ibm.com> Signed-off-by: Eric Richter <erichte@linux.ibm.com> --- arch/powerpc/include/asm/opal-api.h | 5 +- arch/powerpc/include/asm/opal.h | 7 ++ arch/powerpc/include/asm/secvar.h | 35 +++++++ arch/powerpc/kernel/Makefile | 2 +- arch/powerpc/kernel/secvar-ops.c | 16 +++ arch/powerpc/platforms/powernv/Makefile | 2 +- arch/powerpc/platforms/powernv/opal-call.c | 3 + arch/powerpc/platforms/powernv/opal-secvar.c | 140 +++++++++++++++++++++++++++ arch/powerpc/platforms/powernv/opal.c | 3 + 9 files changed, 210 insertions(+), 3 deletions(-) create mode 100644 arch/powerpc/include/asm/secvar.h create mode 100644 arch/powerpc/kernel/secvar-ops.c create mode 100644 arch/powerpc/platforms/powernv/opal-secvar.c diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h index 378e3997845a..c1f25a760eb1 100644 --- a/arch/powerpc/include/asm/opal-api.h +++ b/arch/powerpc/include/asm/opal-api.h @@ -211,7 +211,10 @@ #define OPAL_MPIPL_UPDATE 173 #define OPAL_MPIPL_REGISTER_TAG 174 #define OPAL_MPIPL_QUERY_TAG 175 -#define OPAL_LAST 175 +#define OPAL_SECVAR_GET 176 +#define OPAL_SECVAR_GET_NEXT 177 +#define OPAL_SECVAR_ENQUEUE_UPDATE 178 +#define OPAL_LAST 178 #define QUIESCE_HOLD 1 /* Spin all calls at entry */ #define QUIESCE_REJECT 2 /* Fail all calls with OPAL_BUSY */ diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h index a0cf8fba4d12..9986ac34b8e2 100644 --- a/arch/powerpc/include/asm/opal.h +++ b/arch/powerpc/include/asm/opal.h @@ -298,6 +298,13 @@ int opal_sensor_group_clear(u32 group_hndl, int token); int opal_sensor_group_enable(u32 group_hndl, int token, bool enable); int opal_nx_coproc_init(uint32_t chip_id, uint32_t ct); +int opal_secvar_get(const char *key, uint64_t key_len, u8 *data, + uint64_t *data_size); +int opal_secvar_get_next(const char *key, uint64_t *key_len, + uint64_t key_buf_size); +int opal_secvar_enqueue_update(const char *key, uint64_t key_len, u8 *data, + uint64_t data_size); + s64 opal_mpipl_update(enum opal_mpipl_ops op, u64 src, u64 dest, u64 size); s64 opal_mpipl_register_tag(enum opal_mpipl_tags tag, u64 addr); s64 opal_mpipl_query_tag(enum opal_mpipl_tags tag, u64 *addr); diff --git a/arch/powerpc/include/asm/secvar.h b/arch/powerpc/include/asm/secvar.h new file mode 100644 index 000000000000..4cc35b58b986 --- /dev/null +++ b/arch/powerpc/include/asm/secvar.h @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2019 IBM Corporation + * Author: Nayna Jain + * + * PowerPC secure variable operations. + */ +#ifndef SECVAR_OPS_H +#define SECVAR_OPS_H + +#include <linux/types.h> +#include <linux/errno.h> + +extern const struct secvar_operations *secvar_ops; + +struct secvar_operations { + int (*get)(const char *key, uint64_t key_len, u8 *data, + uint64_t *data_size); + int (*get_next)(const char *key, uint64_t *key_len, + uint64_t keybufsize); + int (*set)(const char *key, uint64_t key_len, u8 *data, + uint64_t data_size); +}; + +#ifdef CONFIG_PPC_SECURE_BOOT + +extern void set_secvar_ops(const struct secvar_operations *ops); + +#else + +static inline void set_secvar_ops(const struct secvar_operations *ops) { } + +#endif + +#endif diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index e8eb2955b7d5..3cf26427334f 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -161,7 +161,7 @@ ifneq ($(CONFIG_PPC_POWERNV)$(CONFIG_PPC_SVM),) obj-y += ucall.o endif -obj-$(CONFIG_PPC_SECURE_BOOT) += secure_boot.o ima_arch.o +obj-$(CONFIG_PPC_SECURE_BOOT) += secure_boot.o ima_arch.o secvar-ops.o # Disable GCOV, KCOV & sanitizers in odd or sensitive code GCOV_PROFILE_prom_init.o := n diff --git a/arch/powerpc/kernel/secvar-ops.c b/arch/powerpc/kernel/secvar-ops.c new file mode 100644 index 000000000000..4cfa7dbd8850 --- /dev/null +++ b/arch/powerpc/kernel/secvar-ops.c @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 IBM Corporation + * Author: Nayna Jain + * + * This file initializes secvar operations for PowerPC Secureboot + */ + +#include <asm/secvar.h> + +const struct secvar_operations *secvar_ops; + +void set_secvar_ops(const struct secvar_operations *ops) +{ + secvar_ops = ops; +} diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile index a3ac9646119d..f9c4fa99e8b9 100644 --- a/arch/powerpc/platforms/powernv/Makefile +++ b/arch/powerpc/platforms/powernv/Makefile @@ -4,7 +4,7 @@ obj-y += idle.o opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o obj-y += rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o obj-y += opal-msglog.o opal-hmi.o opal-power.o opal-irqchip.o obj-y += opal-kmsg.o opal-powercap.o opal-psr.o opal-sensor-groups.o -obj-y += ultravisor.o +obj-y += ultravisor.o opal-secvar.o obj-$(CONFIG_SMP) += smp.o subcore.o subcore-asm.o obj-$(CONFIG_FA_DUMP) += opal-fadump.o diff --git a/arch/powerpc/platforms/powernv/opal-call.c b/arch/powerpc/platforms/powernv/opal-call.c index a2aa5e433ac8..5cd0f52d258f 100644 --- a/arch/powerpc/platforms/powernv/opal-call.c +++ b/arch/powerpc/platforms/powernv/opal-call.c @@ -290,3 +290,6 @@ OPAL_CALL(opal_nx_coproc_init, OPAL_NX_COPROC_INIT); OPAL_CALL(opal_mpipl_update, OPAL_MPIPL_UPDATE); OPAL_CALL(opal_mpipl_register_tag, OPAL_MPIPL_REGISTER_TAG); OPAL_CALL(opal_mpipl_query_tag, OPAL_MPIPL_QUERY_TAG); +OPAL_CALL(opal_secvar_get, OPAL_SECVAR_GET); +OPAL_CALL(opal_secvar_get_next, OPAL_SECVAR_GET_NEXT); +OPAL_CALL(opal_secvar_enqueue_update, OPAL_SECVAR_ENQUEUE_UPDATE); diff --git a/arch/powerpc/platforms/powernv/opal-secvar.c b/arch/powerpc/platforms/powernv/opal-secvar.c new file mode 100644 index 000000000000..14133e120bdd --- /dev/null +++ b/arch/powerpc/platforms/powernv/opal-secvar.c @@ -0,0 +1,140 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * PowerNV code for secure variables + * + * Copyright (C) 2019 IBM Corporation + * Author: Claudio Carvalho + * Nayna Jain + * + * APIs to access secure variables managed by OPAL. + */ + +#define pr_fmt(fmt) "secvar: "fmt + +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/of_platform.h> +#include <asm/opal.h> +#include <asm/secvar.h> +#include <asm/secure_boot.h> + +static int opal_status_to_err(int rc) +{ + int err; + + switch (rc) { + case OPAL_SUCCESS: + err = 0; + break; + case OPAL_UNSUPPORTED: + err = -ENXIO; + break; + case OPAL_PARAMETER: + err = -EINVAL; + break; + case OPAL_RESOURCE: + err = -ENOSPC; + break; + case OPAL_HARDWARE: + err = -EIO; + break; + case OPAL_NO_MEM: + err = -ENOMEM; + break; + case OPAL_EMPTY: + err = -ENOENT; + break; + case OPAL_PARTIAL: + err = -EFBIG; + break; + default: + err = -EINVAL; + } + + return err; +} + +static int opal_get_variable(const char *key, uint64_t ksize, + u8 *data, uint64_t *dsize) +{ + int rc; + + if (!key || !dsize) + return -EINVAL; + + *dsize = cpu_to_be64(*dsize); + + rc = opal_secvar_get(key, ksize, data, dsize); + + *dsize = be64_to_cpu(*dsize); + + return opal_status_to_err(rc); +} + +static int opal_get_next_variable(const char *key, uint64_t *keylen, + uint64_t keybufsize) +{ + int rc; + + if (!key || !keylen) + return -EINVAL; + + *keylen = cpu_to_be64(*keylen); + + rc = opal_secvar_get_next(key, keylen, keybufsize); + + *keylen = be64_to_cpu(*keylen); + + return opal_status_to_err(rc); +} + +static int opal_set_variable(const char *key, uint64_t ksize, u8 *data, + uint64_t dsize) +{ + int rc; + + if (!key || !data) + return -EINVAL; + + rc = opal_secvar_enqueue_update(key, ksize, data, dsize); + + return opal_status_to_err(rc); +} + +static const struct secvar_operations opal_secvar_ops = { + .get = opal_get_variable, + .get_next = opal_get_next_variable, + .set = opal_set_variable, +}; + +static int opal_secvar_probe(struct platform_device *pdev) +{ + if (!opal_check_token(OPAL_SECVAR_GET) + || !opal_check_token(OPAL_SECVAR_GET_NEXT) + || !opal_check_token(OPAL_SECVAR_ENQUEUE_UPDATE)) { + pr_err("OPAL doesn't support secure variables\n"); + return -ENODEV; + } + + set_secvar_ops(&opal_secvar_ops); + + return 0; +} + +static const struct of_device_id opal_secvar_match[] = { + { .compatible = "ibm,secvar-backend",}, + {}, +}; + +static struct platform_driver opal_secvar_driver = { + .driver = { + .name = "secvar", + .of_match_table = opal_secvar_match, + }, +}; + +static int __init opal_secvar_init(void) +{ + return platform_driver_probe(&opal_secvar_driver, opal_secvar_probe); +} +device_initcall(opal_secvar_init); diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c index 38e90270280b..8355bcd00f93 100644 --- a/arch/powerpc/platforms/powernv/opal.c +++ b/arch/powerpc/platforms/powernv/opal.c @@ -1002,6 +1002,9 @@ static int __init opal_init(void) /* Initialise OPAL Power control interface */ opal_power_control_init(); + /* Initialize OPAL secure variables */ + opal_pdev_init("ibm,secvar-backend"); + return 0; } machine_subsys_initcall(powernv, opal_init); -- 2.13.6
next prev parent reply index Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-11-11 3:10 [PATCH v9 0/4] powerpc: expose secure variables to the kernel and userspace Nayna Jain 2019-11-11 3:10 ` Nayna Jain [this message] 2019-11-14 9:08 ` [PATCH v9 1/4] powerpc/powernv: Add OPAL API interface to access secure variable Michael Ellerman 2019-11-11 3:10 ` [PATCH v9 2/4] powerpc: expose secure variables to userspace via sysfs Nayna Jain 2019-11-11 3:10 ` [PATCH v9 3/4] x86/efi: move common keyring handler functions to new file Nayna Jain 2019-11-11 3:10 ` [PATCH v9 4/4] powerpc: load firmware trusted keys/hashes into kernel keyring Nayna Jain 2019-11-11 22:37 ` [PATCH v9 0/4] powerpc: expose secure variables to the kernel and userspace Lakshmi Ramasubramanian 2019-11-12 1:21 ` Michael Ellerman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1573441836-3632-2-git-send-email-nayna@linux.ibm.com \ --to=nayna@linux.ibm.com \ --cc=ard.biesheuvel@linaro.org \ --cc=cclaudio@linux.ibm.com \ --cc=erichte@linux.ibm.com \ --cc=erpalmer@us.ibm.com \ --cc=gcwilson@linux.ibm.com \ --cc=gregkh@linuxfoundation.org \ --cc=jk@ozlabs.org \ --cc=linux-efi@vger.kernel.org \ --cc=linux-integrity@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linuxppc-dev@ozlabs.org \ --cc=matthew.garret@nebula.com \ --cc=oohall@gmail.com \ --cc=paulus@samba.org \ --cc=zohar@linux.ibm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
LinuxPPC-Dev Archive on lore.kernel.org Archives are clonable: git clone --mirror https://lore.kernel.org/linuxppc-dev/0 linuxppc-dev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 linuxppc-dev linuxppc-dev/ https://lore.kernel.org/linuxppc-dev \ linuxppc-dev@lists.ozlabs.org linuxppc-dev@ozlabs.org public-inbox-index linuxppc-dev Example config snippet for mirrors Newsgroup available over NNTP: nntp://nntp.lore.kernel.org/org.ozlabs.lists.linuxppc-dev AGPL code for this site: git clone https://public-inbox.org/public-inbox.git