LinuxPPC-Dev Archive on lore.kernel.org
 help / color / Atom feed
From: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
To: mpe@ellerman.id.au
Cc: mikey@neuling.org, maddy@linux.vnet.ibm.com,
	linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v2 09/10] tools/perf: Add perf tools support for extended register capability in powerpc
Date: Wed,  1 Jul 2020 05:21:01 -0400
Message-ID: <1593595262-1433-10-git-send-email-atrajeev@linux.vnet.ibm.com> (raw)
In-Reply-To: <1593595262-1433-1-git-send-email-atrajeev@linux.vnet.ibm.com>

From: Anju T Sudhakar <anju@linux.vnet.ibm.com>

Add extended regs to sample_reg_mask in the tool side to use
with `-I?` option. Perf tools side uses extended mask to display
the platform supported register names (with -I? option) to the user
and also send this mask to the kernel to capture the extended registers
in each sample. Hence decide the mask value based on the processor
version.

Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
[Decide extended mask at run time based on platform]
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
---
 tools/arch/powerpc/include/uapi/asm/perf_regs.h | 14 ++++++-
 tools/perf/arch/powerpc/include/perf_regs.h     |  5 ++-
 tools/perf/arch/powerpc/util/perf_regs.c        | 55 +++++++++++++++++++++++++
 3 files changed, 72 insertions(+), 2 deletions(-)

diff --git a/tools/arch/powerpc/include/uapi/asm/perf_regs.h b/tools/arch/powerpc/include/uapi/asm/perf_regs.h
index f599064..485b1d5 100644
--- a/tools/arch/powerpc/include/uapi/asm/perf_regs.h
+++ b/tools/arch/powerpc/include/uapi/asm/perf_regs.h
@@ -48,6 +48,18 @@ enum perf_event_powerpc_regs {
 	PERF_REG_POWERPC_DSISR,
 	PERF_REG_POWERPC_SIER,
 	PERF_REG_POWERPC_MMCRA,
-	PERF_REG_POWERPC_MAX,
+	/* Extended registers */
+	PERF_REG_POWERPC_MMCR0,
+	PERF_REG_POWERPC_MMCR1,
+	PERF_REG_POWERPC_MMCR2,
+	/* Max regs without the extended regs */
+	PERF_REG_POWERPC_MAX = PERF_REG_POWERPC_MMCRA + 1,
 };
+
+#define PERF_REG_PMU_MASK	((1ULL << PERF_REG_POWERPC_MAX) - 1)
+
+/* PERF_REG_EXTENDED_MASK value for CPU_FTR_ARCH_300 */
+#define PERF_REG_PMU_MASK_300   (((1ULL << (PERF_REG_POWERPC_MMCR2 + 1)) - 1) \
+				- PERF_REG_PMU_MASK)
+
 #endif /* _UAPI_ASM_POWERPC_PERF_REGS_H */
diff --git a/tools/perf/arch/powerpc/include/perf_regs.h b/tools/perf/arch/powerpc/include/perf_regs.h
index e18a355..46ed00d 100644
--- a/tools/perf/arch/powerpc/include/perf_regs.h
+++ b/tools/perf/arch/powerpc/include/perf_regs.h
@@ -64,7 +64,10 @@
 	[PERF_REG_POWERPC_DAR] = "dar",
 	[PERF_REG_POWERPC_DSISR] = "dsisr",
 	[PERF_REG_POWERPC_SIER] = "sier",
-	[PERF_REG_POWERPC_MMCRA] = "mmcra"
+	[PERF_REG_POWERPC_MMCRA] = "mmcra",
+	[PERF_REG_POWERPC_MMCR0] = "mmcr0",
+	[PERF_REG_POWERPC_MMCR1] = "mmcr1",
+	[PERF_REG_POWERPC_MMCR2] = "mmcr2",
 };
 
 static inline const char *perf_reg_name(int id)
diff --git a/tools/perf/arch/powerpc/util/perf_regs.c b/tools/perf/arch/powerpc/util/perf_regs.c
index 0a52429..9179230 100644
--- a/tools/perf/arch/powerpc/util/perf_regs.c
+++ b/tools/perf/arch/powerpc/util/perf_regs.c
@@ -6,9 +6,14 @@
 
 #include "../../../util/perf_regs.h"
 #include "../../../util/debug.h"
+#include "../../../util/event.h"
+#include "../../../util/header.h"
+#include "../../../perf-sys.h"
 
 #include <linux/kernel.h>
 
+#define PVR_POWER9		0x004E
+
 const struct sample_reg sample_reg_masks[] = {
 	SMPL_REG(r0, PERF_REG_POWERPC_R0),
 	SMPL_REG(r1, PERF_REG_POWERPC_R1),
@@ -55,6 +60,9 @@
 	SMPL_REG(dsisr, PERF_REG_POWERPC_DSISR),
 	SMPL_REG(sier, PERF_REG_POWERPC_SIER),
 	SMPL_REG(mmcra, PERF_REG_POWERPC_MMCRA),
+	SMPL_REG(mmcr0, PERF_REG_POWERPC_MMCR0),
+	SMPL_REG(mmcr1, PERF_REG_POWERPC_MMCR1),
+	SMPL_REG(mmcr2, PERF_REG_POWERPC_MMCR2),
 	SMPL_REG_END
 };
 
@@ -163,3 +171,50 @@ int arch_sdt_arg_parse_op(char *old_op, char **new_op)
 
 	return SDT_ARG_VALID;
 }
+
+uint64_t arch__intr_reg_mask(void)
+{
+	struct perf_event_attr attr = {
+		.type                   = PERF_TYPE_HARDWARE,
+		.config                 = PERF_COUNT_HW_CPU_CYCLES,
+		.sample_type            = PERF_SAMPLE_REGS_INTR,
+		.precise_ip             = 1,
+		.disabled               = 1,
+		.exclude_kernel         = 1,
+	};
+	int fd, ret;
+	char buffer[64];
+	u32 version;
+	u64 extended_mask = 0;
+
+	/* Get the PVR value to set the extended
+	 * mask specific to platform
+	 */
+	get_cpuid(buffer, sizeof(buffer));
+	ret = sscanf(buffer, "%u,", &version);
+
+	if (ret != 1) {
+		pr_debug("Failed to get the processor version, unable to output extended registers\n");
+		return PERF_REGS_MASK;
+	}
+
+	if (version == PVR_POWER9)
+		extended_mask = PERF_REG_PMU_MASK_300;
+	else
+		return PERF_REGS_MASK;
+
+	attr.sample_regs_intr = extended_mask;
+	attr.sample_period = 1;
+	event_attr_init(&attr);
+
+	/*
+	 * check if the pmu supports perf extended regs, before
+	 * returning the register mask to sample.
+	 */
+	fd = sys_perf_event_open(&attr, 0, -1, -1, 0);
+	if (fd != -1) {
+		close(fd);
+		return (extended_mask | PERF_REGS_MASK);
+	}
+	return PERF_REGS_MASK;
+}
-- 
1.8.3.1


  parent reply index

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-01  9:20 [PATCH v2 00/10] powerpc/perf: Add support for power10 PMU Hardware Athira Rajeev
2020-07-01  9:20 ` [PATCH v2 01/10] powerpc/perf: Add support for ISA3.1 PMU SPRs Athira Rajeev
2020-07-01  9:20 ` [PATCH v2 02/10] KVM: PPC: Book3S HV: Save/restore new PMU registers Athira Rajeev
2020-07-01 11:11   ` Paul Mackerras
2020-07-02  6:22     ` Athira Rajeev
2020-07-07  6:13   ` Michael Neuling
2020-07-01  9:20 ` [PATCH v2 03/10] powerpc/xmon: Add PowerISA v3.1 PMU SPRs Athira Rajeev
2020-07-01  9:20 ` [PATCH v2 04/10] powerpc/perf: Add power10_feat to dt_cpu_ftrs Athira Rajeev
2020-07-07  6:22   ` Michael Neuling
2020-07-01  9:20 ` [PATCH v2 05/10] powerpc/perf: Update Power PMU cache_events to u64 type Athira Rajeev
2020-07-01  9:20 ` [PATCH v2 06/10] powerpc/perf: power10 Performance Monitoring support Athira Rajeev
2020-07-02  9:06   ` kernel test robot
2020-07-07  6:50   ` Michael Neuling
2020-07-01  9:20 ` [PATCH v2 07/10] powerpc/perf: support BHRB disable bit and new filtering modes Athira Rajeev
2020-07-07  7:17   ` Michael Neuling
2020-07-01  9:21 ` [PATCH v2 08/10] powerpc/perf: Add support for outputting extended regs in perf intr_regs Athira Rajeev
2020-07-01  9:21 ` Athira Rajeev [this message]
2020-07-01  9:21 ` [PATCH v2 10/10] powerpc/perf: Add extended regs support for power10 platform Athira Rajeev
2020-07-02  9:40   ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1593595262-1433-10-git-send-email-atrajeev@linux.vnet.ibm.com \
    --to=atrajeev@linux.vnet.ibm.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=maddy@linux.vnet.ibm.com \
    --cc=mikey@neuling.org \
    --cc=mpe@ellerman.id.au \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LinuxPPC-Dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linuxppc-dev/0 linuxppc-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linuxppc-dev linuxppc-dev/ https://lore.kernel.org/linuxppc-dev \
		linuxppc-dev@lists.ozlabs.org linuxppc-dev@ozlabs.org
	public-inbox-index linuxppc-dev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.ozlabs.lists.linuxppc-dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git