linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Paul Mackerras <paulus@samba.org>
Cc: Milton Miller <miltonm@bga.com>, linuxppc-dev@ozlabs.org
Subject: [PATCH 6/7] powerpc/32: Wire up the trampoline code for kdump
Date: Wed, 17 Dec 2008 23:09:26 +0300	[thread overview]
Message-ID: <20081217200926.GF4624@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <20081217200610.GA31887@oksana.dev.rtsoft.ru>

From: Dale Farnsworth <dale@farnsworth.org>

Wire up the trampoline code for ppc32 to relay exceptions from the
vectors at address 0 to vectors at address 32MB, and modify Kconfig
to enable Kdump support for all classic powerpcs.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 arch/powerpc/Kconfig             |    2 +-
 arch/powerpc/include/asm/kdump.h |   13 +++++++++++++
 arch/powerpc/kernel/setup_32.c   |    2 ++
 3 files changed, 16 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index be4f99b..f7f5448 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -326,7 +326,7 @@ config KEXEC
 
 config CRASH_DUMP
 	bool "Build a kdump crash kernel"
-	depends on PPC_MULTIPLATFORM && PPC64 && RELOCATABLE
+	depends on (PPC64 && RELOCATABLE) || 6xx
 	help
 	  Build a kernel suitable for use as a kdump capture kernel.
 	  The same kernel binary can be used as production kernel and dump
diff --git a/arch/powerpc/include/asm/kdump.h b/arch/powerpc/include/asm/kdump.h
index b07ebb9..5ebfe5d 100644
--- a/arch/powerpc/include/asm/kdump.h
+++ b/arch/powerpc/include/asm/kdump.h
@@ -1,6 +1,8 @@
 #ifndef _PPC64_KDUMP_H
 #define _PPC64_KDUMP_H
 
+#include <asm/page.h>
+
 /* Kdump kernel runs at 32 MB, change at your peril. */
 #define KDUMP_KERNELBASE	0x2000000
 
@@ -11,8 +13,19 @@
 
 #ifdef CONFIG_CRASH_DUMP
 
+/*
+ * On PPC64 translation is disabled during trampoline setup, so we use
+ * physical addresses. Though on PPC32 translation is already enabled,
+ * so we can't do the same. Luckily create_trampoline() creates relative
+ * branches, so we can just add the PAGE_OFFSET and don't worry about it.
+ */
+#ifdef __powerpc64__
 #define KDUMP_TRAMPOLINE_START	0x0100
 #define KDUMP_TRAMPOLINE_END	0x3000
+#else
+#define KDUMP_TRAMPOLINE_START	(0x0100 + PAGE_OFFSET)
+#define KDUMP_TRAMPOLINE_END	(0x3000 + PAGE_OFFSET)
+#endif /* __powerpc64__ */
 
 #define KDUMP_MIN_TCE_ENTRIES	2048
 
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 086c23c..9ca1d2b 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -121,6 +121,8 @@ notrace void __init machine_init(unsigned long dt_ptr)
 
 	probe_machine();
 
+	setup_kdump_trampoline();
+
 #ifdef CONFIG_6xx
 	if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
 	    cpu_has_feature(CPU_FTR_CAN_NAP))
-- 
1.5.6.5

  parent reply	other threads:[~2008-12-17 20:09 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-12-17 20:06 [PATCH 0/7] Kdump support for classic PPC Anton Vorontsov
2008-12-17 20:08 ` [PATCH 1/7] powerpc: Prepare xmon_save_regs for use with kdump Anton Vorontsov
2008-12-17 20:13   ` Anton Vorontsov
2008-12-17 20:09 ` [PATCH 2/7] powerpc/32/kdump: Implement crash_setup_regs() using ppc_save_regs() Anton Vorontsov
2008-12-17 20:09 ` [PATCH 3/7] powerpc/32: Setup OF properties for kdump Anton Vorontsov
2008-12-21  1:44   ` Paul Mackerras
2008-12-21  3:29     ` Anton Vorontsov
2008-12-17 20:09 ` [PATCH 4/7] powerpc/32: Allow to ioremap RAM addresses for kdump kernel Anton Vorontsov
2008-12-17 20:09 ` [PATCH 5/7] powerpc/32: Add the ability for a classic ppc kernel to be loaded at 32M Anton Vorontsov
2008-12-17 20:09 ` Anton Vorontsov [this message]
2008-12-17 20:09 ` [PATCH 7/7] powerpc/64/kdump: Use ppc_save_regs() in crash_setup_regs() Anton Vorontsov
2009-01-07  3:16   ` Benjamin Herrenschmidt
2009-01-07  4:04     ` Anton Vorontsov
2009-01-07  5:11       ` Benjamin Herrenschmidt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20081217200926.GF4624@oksana.dev.rtsoft.ru \
    --to=avorontsov@ru.mvista.com \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=miltonm@bga.com \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).