From: "Gerhard Pircher" <gerhard_pircher@gmx.net>
To: linuxppc-dev list <linuxppc-dev@ozlabs.org>
Subject: [PATCH v2 2/4] Generic device tree for all AmigaOne boards
Date: Mon, 02 Feb 2009 22:39:13 +0100 [thread overview]
Message-ID: <20090202213913.258290@gmx.net> (raw)
This device tree does not provide the correct CPU name, as various CPU
models and revisions are used in AmigaOnes. Also the PCI root node does
not contain a interrupt mapping property, as all boards have different
interrupt routing. However the kernel can do a 1:1 mapping of all PCI
interrupts, as only i8259 legacy interrupts are used.
Signed-off-by: Gerhard Pircher <gerhard_pircher@gmx.net>
---
arch/powerpc/boot/dts/amigaone.dts | 183 ++++++++++++++++++++++++++++++++++++
1 files changed, 183 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/amigaone.dts
diff --git a/arch/powerpc/boot/dts/amigaone.dts b/arch/powerpc/boot/dts/amigaone.dts
new file mode 100644
index 0000000..54d49e0
--- /dev/null
+++ b/arch/powerpc/boot/dts/amigaone.dts
@@ -0,0 +1,183 @@
+/*
+ * AmigaOne Device Tree Source
+ *
+ * Copyright 2008 Gerhard Pircher (gerhard_pircher@gmx.net)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "AmigaOne";
+ compatible = "eyetech,amigaone";
+ coherency-off;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <32768>; // L1, 32K
+ i-cache-size = <32768>; // L1, 32K
+ timebase-frequency = <0>; // 33.3 MHz, from U-boot
+ clock-frequency = <0>; // From U-boot
+ bus-frequency = <0>; // From U-boot
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0>; // From U-boot
+ };
+
+ pci@80000000 {
+ device_type = "pci";
+ compatible = "mai-logic,articia-s";
+ bus-frequency = <33333333>;
+ bus-range = <0 0xff>;
+ ranges = <0x01000000 0 0x00000000 0xfe000000 0 0x00c00000 // PCI I/O
+ 0x02000000 0 0x80000000 0x80000000 0 0x7d000000 // PCI memory
+ 0x02000000 0 0x00000000 0xfd000000 0 0x01000000>; // PCI alias memory (ISA)
+ 8259-interrupt-acknowledge = <0xfef00000>;
+ // Do not define a interrupt-parent here, if there is no
+ // interrupt-map property.
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ isa@7 {
+ device_type = "isa";
+ compatible = "pciclass,0601";
+ vendor-id = <0x00001106>;
+ device-id = <0x00000686>;
+ revision-id = <0x00000010>;
+ class-code = <0x00060100>;
+ subsystem-id = <0>;
+ subsystem-vendor-id = <0>;
+ devsel-speed = <0x00000001>;
+ min-grant = <0>;
+ max-latency = <0>;
+ /* First 64k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */
+ ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00010000>;
+ interrupt-parent = <&i8259>;
+ #interrupt-cells = <2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ dma-controller@0 {
+ compatible = "pnpPNP,200";
+ reg = <1 0x00000000 0x00000020
+ 1 0x00000080 0x00000010
+ 1 0x000000c0 0x00000020>;
+ /* Channel 4 reserverd, cascade mode, 2x32k transfer/counter
+ * widths and bus master capability.
+ */
+/* dma = <0x4 0x4 0x20 0x20 0x1>; */
+ };
+
+ i8259: interrupt-controller@20 {
+ device_type = "interrupt-controller";
+ compatible = "pnpPNP,000";
+ interrupt-controller;
+ reg = <1 0x00000020 0x00000002
+ 1 0x000000a0 0x00000002
+ 1 0x000004d0 0x00000002>;
+ reserved-interrupts = <2>;
+ #interrupt-cells = <2>;
+ };
+
+ timer@40 {
+ // Also adds pcspkr to platform devices.
+ compatible = "pnpPNP,100";
+ reg = <1 0x00000040 0x00000020>;
+ };
+
+ 8042@60 {
+ device_type = "8042";
+ reg = <1 0x00000060 0x00000001
+ 1 0x00000064 0x00000001>;
+ // IRQ1, IRQ12 (rising edge)
+ interrupts = <1 3 12 3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ keyboard@0 {
+ compatible = "pnpPNP,303";
+ reg = <0>;
+ };
+
+ mouse@1 {
+ compatible = "pnpPNP,f03";
+ reg = <1>;
+ };
+ };
+
+ rtc@70 {
+ compatible = "pnpPNP,b00";
+ reg = <1 0x00000070 0x00000002>;
+ interrupts = <8 3>;
+ };
+
+ serial@3f8 {
+ device_type = "serial";
+ compatible = "pnpPNP,501","pnpPNP,500";
+ reg = <1 0x000003f8 0x00000008>;
+ // IRQ4 (rising edge)
+ interrupts = <4 3>;
+ clock-frequency = <1843200>;
+ current-speed = <115200>;
+ };
+
+ serial@2f8 {
+ device_type = "serial";
+ compatible = "pnpPNP,501","pnpPNP,500";
+ reg = <1 0x000002f8 0x00000008>;
+ // IRQ3 (rising edge)
+ interrupts = <3 3>;
+ clock-frequency = <1843200>;
+ current-speed = <115200>;
+ };
+
+ parallel@378 {
+ device_type = "parallel";
+ // No ECP support for now, otherwise add "pnpPNP,401".
+ compatible = "pnpPNP,400";
+ reg = <1 0x00000378 0x00000003
+ 1 0x00000778 0x00000003>;
+/* interrupts = <7 0>; */
+ // Parallel port DMA mode unknown.
+/* dma = <0x3 0x0 0x0 0x0>; */
+ };
+
+ fdc@3f0 {
+ device_type = "fdc";
+ compatible = "pnpPNP,700";
+ reg = <1 0x000003f0 0x00000008>;
+ // IRQ6 (rising edge)
+ interrupts = <6 3>;
+ // Floppy DMA mode unknown.
+/* dma = < >; */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ disk@0 {
+ reg = <0>;
+ };
+ };
+ };
+ };
+
+ chosen {
+ linux,stdout-path = "/pci@80000000/isa@7/serial@3f8";
+ };
+};
--
1.5.3.4
--
Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger01
next reply other threads:[~2009-02-02 21:39 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-02 21:39 Gerhard Pircher [this message]
2009-02-04 3:51 ` [PATCH v2 2/4] Generic device tree for all AmigaOne boards Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090202213913.258290@gmx.net \
--to=gerhard_pircher@gmx.net \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).