From: Grant Likely <grant.likely@secretlab.ca>
To: linuxppc-dev@ozlabs.org, linux-kernel@vger.kernel.org,
benh@kernel.crashing.org, john.linn@xilinx.com
Subject: [PATCH] fbdev/xilinxfb: Fix improper casting and tighen up probe path
Date: Fri, 12 Jun 2009 11:57:06 -0600 [thread overview]
Message-ID: <20090612175634.12827.12207.stgit@localhost.localdomain> (raw)
From: Grant Likely <grant.likely@secretlab.ca>
The xilinxfb driver is improperly casting a physical address to a
u32, and the probe routine isn't as straight forward as it could be.
(discovered by gcc spitting out warnings on most recent change to
xilinxfb driver).
This patch fixes the cast and simplifies the probe path.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
John, can you please test and verify this fix is correct?
Thanks,
g.
drivers/video/xilinxfb.c | 59 ++++++++++++++++++----------------------------
1 files changed, 23 insertions(+), 36 deletions(-)
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index 7a868bd..b68b331 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -124,7 +124,6 @@ struct xilinxfb_drvdata {
registers */
dcr_host_t dcr_host;
- unsigned int dcr_start;
unsigned int dcr_len;
void *fb_virt; /* virt. address of the frame buffer */
@@ -325,8 +324,8 @@ static int xilinxfb_assign(struct device *dev,
drvdata->regs);
}
/* Put a banner in the log (for DEBUG) */
- dev_dbg(dev, "fb: phys=%p, virt=%p, size=%x\n",
- (void *)drvdata->fb_phys, drvdata->fb_virt, fbsize);
+ dev_dbg(dev, "fb: phys=%llx, virt=%p, size=%x\n",
+ (unsigned long long)drvdata->fb_phys, drvdata->fb_virt, fbsize);
return 0; /* success */
@@ -404,9 +403,7 @@ xilinxfb_of_probe(struct of_device *op, const struct of_device_id *match)
u32 tft_access;
struct xilinxfb_platform_data pdata;
struct resource res;
- int size, rc;
- int start = 0, len = 0;
- dcr_host_t dcr_host;
+ int size, rc, start;
struct xilinxfb_drvdata *drvdata;
/* Copy with the default pdata (not a ptr reference!) */
@@ -414,35 +411,39 @@ xilinxfb_of_probe(struct of_device *op, const struct of_device_id *match)
dev_dbg(&op->dev, "xilinxfb_of_probe(%p, %p)\n", op, match);
+ /* Allocate the driver data region */
+ drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
+ if (!drvdata) {
+ dev_err(&op->dev, "Couldn't allocate device private record\n");
+ return -ENOMEM;
+ }
+
/*
* To check whether the core is connected directly to DCR or PLB
* interface and initialize the tft_access accordingly.
*/
p = (u32 *)of_get_property(op->node, "xlnx,dcr-splb-slave-if", NULL);
-
- if (p)
- tft_access = *p;
- else
- tft_access = 0; /* For backward compatibility */
+ tft_access = p ? *p : 0;
/*
* Fill the resource structure if its direct PLB interface
* otherwise fill the dcr_host structure.
*/
if (tft_access) {
+ drvdata->flags |= PLB_ACCESS_FLAG;
rc = of_address_to_resource(op->node, 0, &res);
if (rc) {
dev_err(&op->dev, "invalid address\n");
- return -ENODEV;
+ goto err;
}
-
} else {
+ res.start = 0;
start = dcr_resource_start(op->node, 0);
- len = dcr_resource_len(op->node, 0);
- dcr_host = dcr_map(op->node, start, len);
- if (!DCR_MAP_OK(dcr_host)) {
- dev_err(&op->dev, "invalid address\n");
- return -ENODEV;
+ drvdata->dcr_len = dcr_resource_len(op->node, 0);
+ drvdata->dcr_host = dcr_map(op->node, start, drvdata->len);
+ if (!DCR_MAP_OK(drvdata->dcr_host)) {
+ dev_err(&op->dev, "invalid DCR address\n");
+ goto err;
}
}
@@ -467,26 +468,12 @@ xilinxfb_of_probe(struct of_device *op, const struct of_device_id *match)
if (of_find_property(op->node, "rotate-display", NULL))
pdata.rotate_screen = 1;
- /* Allocate the driver data region */
- drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
- if (!drvdata) {
- dev_err(&op->dev, "Couldn't allocate device private record\n");
- return -ENOMEM;
- }
dev_set_drvdata(&op->dev, drvdata);
+ return xilinxfb_assign(&op->dev, drvdata, res.start, &pdata);
- if (tft_access)
- drvdata->flags |= PLB_ACCESS_FLAG;
-
- /* Arguments are passed based on the interface */
- if (drvdata->flags & PLB_ACCESS_FLAG) {
- return xilinxfb_assign(&op->dev, drvdata, res.start, &pdata);
- } else {
- drvdata->dcr_start = start;
- drvdata->dcr_len = len;
- drvdata->dcr_host = dcr_host;
- return xilinxfb_assign(&op->dev, drvdata, 0, &pdata);
- }
+ err:
+ kfree(drvdata);
+ return -ENODEV;
}
static int __devexit xilinxfb_of_remove(struct of_device *op)
next reply other threads:[~2009-06-12 17:57 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-12 17:57 Grant Likely [this message]
2009-06-15 15:16 ` [PATCH] fbdev/xilinxfb: Fix improper casting and tighen up probe path John Linn
2009-06-15 17:06 ` John Linn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090612175634.12827.12207.stgit@localhost.localdomain \
--to=grant.likely@secretlab.ca \
--cc=benh@kernel.crashing.org \
--cc=john.linn@xilinx.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).