linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: David Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org, Andy Fleming <afleming@freescale.com>,
	Timur Tabi <timur@freescale.com>,
	linuxppc-dev@ozlabs.org
Subject: [PATCH v2 3/3] ucc_geth: Fix hangs after switching from full to half duplex
Date: Thu, 10 Sep 2009 21:58:52 +0400	[thread overview]
Message-ID: <20090910175852.GA18948@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <20090910020145.GC31083@oksana.dev.rtsoft.ru>

MPC8360 QE UCC ethernet controllers hang when changing link duplex
under a load (a bit of NFS activity is enough).

  PHY: mdio@e0102120:00 - Link is Up - 1000/Full
  sh-3.00# ethtool -s eth0 speed 100 duplex half autoneg off
  PHY: mdio@e0102120:00 - Link is Down
  PHY: mdio@e0102120:00 - Link is Up - 100/Half
  NETDEV WATCHDOG: eth0 (ucc_geth): transmit queue 0 timed out
  ------------[ cut here ]------------
  Badness at c01fcbd0 [verbose debug info unavailable]
  NIP: c01fcbd0 LR: c01fcbd0 CTR: c0194e44
  ...

The cure is to disable the controller before changing speed/duplex
and enable it afterwards.

Since ugeth_graceful_stop_{tx,rx} now may be called from an atomic
context, switch the two functions from msleep() to mdelay().

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---

v2: Switch ugeth_graceful_stop_{tx,rx} to mdelay. Noticed with
    CONFIG_DEBUG_SPINLOCK_SLEEP.

 drivers/net/ucc_geth.c |    8 ++++++--
 1 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 2a2c973..5a0803f 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -1432,7 +1432,7 @@ static int ugeth_graceful_stop_tx(struct ucc_geth_private *ugeth)
 
 	/* Wait for command to complete */
 	do {
-		msleep(10);
+		mdelay(10);
 		temp = in_be32(uccf->p_ucce);
 	} while (!(temp & UCC_GETH_UCCE_GRA) && --i);
 
@@ -1464,7 +1464,7 @@ static int ugeth_graceful_stop_rx(struct ucc_geth_private *ugeth)
 						ucc_num);
 		qe_issue_cmd(QE_GRACEFUL_STOP_RX, cecr_subblock,
 			     QE_CR_PROTOCOL_ETHERNET, 0);
-		msleep(10);
+		mdelay(10);
 		temp = in_8(&ugeth->p_rx_glbl_pram->rxgstpack);
 	} while (!(temp & GRACEFUL_STOP_ACKNOWLEDGE_RX) && --i);
 
@@ -1631,9 +1631,13 @@ static void adjust_link(struct net_device *dev)
 			ugeth->oldspeed = phydev->speed;
 		}
 
+		ugeth_disable(ugeth, COMM_DIR_RX_AND_TX);
+
 		out_be32(&ug_regs->maccfg2, tempval);
 		out_be32(&uf_regs->upsmr, upsmr);
 
+		ugeth_enable(ugeth, COMM_DIR_RX_AND_TX);
+
 		if (!ugeth->oldlink) {
 			new_state = 1;
 			ugeth->oldlink = 1;
-- 
1.6.3.3

  reply	other threads:[~2009-09-10 17:58 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-09-10  2:01 [PATCH 3/3] ucc_geth: Fix hangs after switching from full to half duplex Anton Vorontsov
2009-09-10 17:58 ` Anton Vorontsov [this message]
2009-09-10 18:04   ` [PATCH v2 " Scott Wood
2009-09-10 19:40     ` Anton Vorontsov
2009-09-10 21:09       ` Anton Vorontsov
2009-09-10 21:48         ` [PATCH v3 " Anton Vorontsov
2009-09-11 19:19           ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090910175852.GA18948@oksana.dev.rtsoft.ru \
    --to=avorontsov@ru.mvista.com \
    --cc=afleming@freescale.com \
    --cc=davem@davemloft.net \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=netdev@vger.kernel.org \
    --cc=timur@freescale.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).