From: John Bonesio <bones@secretlab.ca>
To: linux-kernel@vger.kernel.org
Cc: glikely@secretlab.ca, jdl@jdl.com, linuxppc-dev@lists.ozlabs.org,
devicetree-discuss@lists.ozlabs.org, david@gibson.dropbear.id.au
Subject: [PATCH 3/5] powerpc/5200: dts: remove unused properties
Date: Tue, 16 Nov 2010 12:50:10 -0800 [thread overview]
Message-ID: <20101116205010.12146.37154.stgit@riker> (raw)
In-Reply-To: <20101116204917.12146.39851.stgit@riker>
This patch remove unused properties in dts files in preparation of refactoring
the dts files for MPC5200b based boards.
Signed-off-by: John Bonesio <bones@secretlab.ca>
---
arch/powerpc/boot/dts/cm5200.dts | 2 --
arch/powerpc/boot/dts/lite5200b.dts | 3 ---
arch/powerpc/boot/dts/media5200.dts | 2 --
arch/powerpc/boot/dts/motionpro.dts | 2 --
arch/powerpc/boot/dts/pcm030.dts | 2 --
arch/powerpc/boot/dts/pcm032.dts | 2 --
6 files changed, 0 insertions(+), 13 deletions(-)
diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
index 9369dcd..d549897 100644
--- a/arch/powerpc/boot/dts/cm5200.dts
+++ b/arch/powerpc/boot/dts/cm5200.dts
@@ -230,8 +230,6 @@
reg = <0 0 0x2000000>;
bank-width = <2>;
device-width = <2>;
- #size-cells = <1>;
- #address-cells = <1>;
};
};
};
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index a74b790..c0a4e45 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -174,7 +174,6 @@
psc@2000 { // PSC1
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- cell-index = <0>;
reg = <0x2000 0x100>;
interrupts = <2 1 0>;
};
@@ -198,7 +197,6 @@
// PSC4 in uart mode example
//serial@2600 { // PSC4
// compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- // cell-index = <3>;
// reg = <0x2600 0x100>;
// interrupts = <2 11 0>;
//};
@@ -206,7 +204,6 @@
// PSC5 in uart mode example
//serial@2800 { // PSC5
// compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- // cell-index = <4>;
// reg = <0x2800 0x100>;
// interrupts = <2 12 0>;
//};
diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts
index a70ef68..e027f45 100644
--- a/arch/powerpc/boot/dts/media5200.dts
+++ b/arch/powerpc/boot/dts/media5200.dts
@@ -185,8 +185,6 @@
// PSC6 in uart mode
console: psc@2c00 { // PSC6
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- cell-index = <5>;
- port-number = <0>; // Logical port assignment
reg = <0x2c00 0x100>;
interrupts = <2 4 0>;
};
diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
index f6261ea..3ab4666 100644
--- a/arch/powerpc/boot/dts/motionpro.dts
+++ b/arch/powerpc/boot/dts/motionpro.dts
@@ -277,8 +277,6 @@
reg = <0 0 0x01000000>;
bank-width = <2>;
device-width = <2>;
- #size-cells = <1>;
- #address-cells = <1>;
};
};
};
diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
index 3a4f554..f3e30bb 100644
--- a/arch/powerpc/boot/dts/pcm030.dts
+++ b/arch/powerpc/boot/dts/pcm030.dts
@@ -196,7 +196,6 @@
psc@2400 { /* PSC3 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- cell-index = <2>;
reg = <0x2400 0x100>;
interrupts = <2 3 0>;
};
@@ -207,7 +206,6 @@
psc@2c00 { /* PSC6 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- cell-index = <5>;
reg = <0x2c00 0x100>;
interrupts = <2 4 0>;
};
diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts
index 17596c7..e0f2702 100644
--- a/arch/powerpc/boot/dts/pcm032.dts
+++ b/arch/powerpc/boot/dts/pcm032.dts
@@ -196,7 +196,6 @@
psc@2400 { /* PSC3 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- cell-index = <2>;
reg = <0x2400 0x100>;
interrupts = <2 3 0>;
};
@@ -207,7 +206,6 @@
psc@2c00 { /* PSC6 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- cell-index = <5>;
reg = <0x2c00 0x100>;
interrupts = <2 4 0>;
};
next prev parent reply other threads:[~2010-11-16 20:50 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-16 20:49 [PATCH 0/5] Series short description John Bonesio
2010-11-16 20:49 ` [PATCH 1/5] scripts: dtc: Merge in changes from the dtc repository John Bonesio
2010-11-17 4:59 ` Grant Likely
2010-11-17 15:47 ` Jon Loeliger
2010-11-18 3:41 ` David Gibson
2010-11-17 5:56 ` Kyle Moffett
2010-11-17 5:59 ` Grant Likely
2010-11-17 15:51 ` Jon Loeliger
2010-11-17 6:11 ` Grant Likely
2010-11-17 6:29 ` John Bonesio
2010-11-16 20:50 ` [PATCH 2/5] powerpc/5200: dts: rename nodes to prepare for refactoring dts files John Bonesio
2010-11-17 5:03 ` Grant Likely
2010-11-16 20:50 ` John Bonesio [this message]
2010-11-17 5:05 ` [PATCH 3/5] powerpc/5200: dts: remove unused properties Grant Likely
2010-11-16 20:50 ` [PATCH 4/5] powerpc/5200: dts: Remove incorrect combatible strings John Bonesio
2010-11-17 5:08 ` Grant Likely
2010-11-16 20:50 ` [PATCH 5/5] powerpc/5200: dts: refactor dts files John Bonesio
2010-11-17 23:28 [PATCH 0/5] refactor dts files for mpc5200b based systems (take 2) John Bonesio
2010-11-17 23:28 ` [PATCH 3/5] powerpc/5200: dts: remove unused properties John Bonesio
2011-01-04 1:29 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101116205010.12146.37154.stgit@riker \
--to=bones@secretlab.ca \
--cc=david@gibson.dropbear.id.au \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=glikely@secretlab.ca \
--cc=jdl@jdl.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).