linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
To: tglx@linutronix.de, peterz@infradead.org, tj@kernel.org,
	oleg@redhat.com, paulmck@linux.vnet.ibm.com,
	rusty@rustcorp.com.au, mingo@kernel.org,
	akpm@linux-foundation.org, namhyung@kernel.org
Cc: linux-arch@vger.kernel.org, linux@arm.linux.org.uk,
	nikunj@linux.vnet.ibm.com, linux-pm@vger.kernel.org,
	fweisbec@gmail.com, linux-doc@vger.kernel.org,
	linux-kernel@vger.kernel.org, rostedt@goodmis.org,
	xiaoguangrong@linux.vnet.ibm.com, rjw@sisk.pl, sbw@mit.edu,
	wangyun@linux.vnet.ibm.com, srivatsa.bhat@linux.vnet.ibm.com,
	netdev@vger.kernel.org, vincent.guittot@linaro.org,
	walken@google.com, linuxppc-dev@lists.ozlabs.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 08/46] CPU hotplug: Provide APIs to prevent CPU offline from atomic context
Date: Mon, 18 Feb 2013 18:09:20 +0530	[thread overview]
Message-ID: <20130218123920.26245.56709.stgit@srivatsabhat.in.ibm.com> (raw)
In-Reply-To: <20130218123714.26245.61816.stgit@srivatsabhat.in.ibm.com>

There are places where preempt_disable() or local_irq_disable() are used
to prevent any CPU from going offline during the critical section. Let us
call them as "atomic hotplug readers" ("atomic" because they run in atomic,
non-preemptible contexts).

Today, preempt_disable() or its equivalent works because the hotplug writer
uses stop_machine() to take CPUs offline. But once stop_machine() is gone
from the CPU hotplug offline path, the readers won't be able to prevent
CPUs from going offline using preempt_disable().

So the intent here is to provide synchronization APIs for such atomic hotplug
readers, to prevent (any) CPUs from going offline, without depending on
stop_machine() at the writer-side. The new APIs will look something like
this:  get_online_cpus_atomic() and put_online_cpus_atomic()

Some important design requirements and considerations:
-----------------------------------------------------

1. Scalable synchronization at the reader-side, especially in the fast-path

   Any synchronization at the atomic hotplug readers side must be highly
   scalable - avoid global single-holder locks/counters etc. Because, these
   paths currently use the extremely fast preempt_disable(); our replacement
   to preempt_disable() should not become ridiculously costly and also should
   not serialize the readers among themselves needlessly.

   At a minimum, the new APIs must be extremely fast at the reader side
   atleast in the fast-path, when no CPU offline writers are active.

2. preempt_disable() was recursive. The replacement should also be recursive.

3. No (new) lock-ordering restrictions

   preempt_disable() was super-flexible. It didn't impose any ordering
   restrictions or rules for nesting. Our replacement should also be equally
   flexible and usable.

4. No deadlock possibilities

   Regular per-cpu locking is not the way to go if we want to have relaxed
   rules for lock-ordering. Because, we can end up in circular-locking
   dependencies as explained in https://lkml.org/lkml/2012/12/6/290

   So, avoid the usual per-cpu locking schemes (per-cpu locks/per-cpu atomic
   counters with spin-on-contention etc) as much as possible, to avoid
   numerous deadlock possibilities from creeping in.


Implementation of the design:
----------------------------

We use per-CPU reader-writer locks for synchronization because:

  a. They are quite fast and scalable in the fast-path (when no writers are
     active), since they use fast per-cpu counters in those paths.

  b. They are recursive at the reader side.

  c. They provide a good amount of safety against deadlocks; they don't
     spring new deadlock possibilities on us from out of nowhere. As a
     result, they have relaxed locking rules and are quite flexible, and
     thus are best suited for replacing usages of preempt_disable() or
     local_irq_disable() at the reader side.

Together, these satisfy all the requirements mentioned above.

I'm indebted to Michael Wang and Xiao Guangrong for their numerous thoughtful
suggestions and ideas, which inspired and influenced many of the decisions in
this as well as previous designs. Thanks a lot Michael and Xiao!

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Howells <dhowells@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: uclinux-dist-devel@blackfin.uclinux.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-am33-list@redhat.com
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
---

 arch/arm/Kconfig      |    1 +
 arch/blackfin/Kconfig |    1 +
 arch/ia64/Kconfig     |    1 +
 arch/mips/Kconfig     |    1 +
 arch/mn10300/Kconfig  |    1 +
 arch/parisc/Kconfig   |    1 +
 arch/powerpc/Kconfig  |    1 +
 arch/s390/Kconfig     |    1 +
 arch/sh/Kconfig       |    1 +
 arch/sparc/Kconfig    |    1 +
 arch/x86/Kconfig      |    1 +
 include/linux/cpu.h   |    4 ++++
 kernel/cpu.c          |   55 +++++++++++++++++++++++++++++++++++++++++++++++--
 13 files changed, 68 insertions(+), 2 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 67874b8..cb6b94b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1616,6 +1616,7 @@ config NR_CPUS
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
 	depends on SMP && HOTPLUG
+	select PERCPU_RWLOCK
 	help
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu.
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index b6f3ad5..83d9882 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -261,6 +261,7 @@ config NR_CPUS
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
 	depends on SMP && HOTPLUG
+	select PERCPU_RWLOCK
 	default y
 
 config BF_REV_MIN
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 3279646..c246772 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -378,6 +378,7 @@ config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
 	depends on SMP && EXPERIMENTAL
 	select HOTPLUG
+	select PERCPU_RWLOCK
 	default n
 	---help---
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 2ac626a..f97c479 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -956,6 +956,7 @@ config SYS_HAS_EARLY_PRINTK
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
 	depends on SMP && HOTPLUG && SYS_SUPPORTS_HOTPLUG_CPU
+	select PERCPU_RWLOCK
 	help
 	  Say Y here to allow turning CPUs off and on. CPUs can be
 	  controlled through /sys/devices/system/cpu.
diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
index e70001c..a64e488 100644
--- a/arch/mn10300/Kconfig
+++ b/arch/mn10300/Kconfig
@@ -60,6 +60,7 @@ config ARCH_HAS_ILOG2_U32
 
 config HOTPLUG_CPU
 	def_bool n
+	select PERCPU_RWLOCK
 
 source "init/Kconfig"
 
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index b77feff..6f55cd4 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -226,6 +226,7 @@ config HOTPLUG_CPU
 	bool
 	default y if SMP
 	select HOTPLUG
+	select PERCPU_RWLOCK
 
 config ARCH_SELECT_MEMORY_MODEL
 	def_bool y
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 17903f1..56b1f15 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -336,6 +336,7 @@ config HOTPLUG_CPU
 	bool "Support for enabling/disabling CPUs"
 	depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || \
 	PPC_PMAC || PPC_POWERNV || (PPC_85xx && !PPC_E500MC))
+	select PERCPU_RWLOCK
 	---help---
 	  Say Y here to be able to disable and re-enable individual
 	  CPUs at runtime on SMP machines.
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index b5ea38c..a9aafb4 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -299,6 +299,7 @@ config HOTPLUG_CPU
 	prompt "Support for hot-pluggable CPUs"
 	depends on SMP
 	select HOTPLUG
+	select PERCPU_RWLOCK
 	help
 	  Say Y here to be able to turn CPUs off and on. CPUs
 	  can be controlled through /sys/devices/system/cpu/cpu#.
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index babc2b8..8c92eef 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -765,6 +765,7 @@ config NR_CPUS
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
 	depends on SMP && HOTPLUG && EXPERIMENTAL
+	select PERCPU_RWLOCK
 	help
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu.
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index cb9c333..b22f29d 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -254,6 +254,7 @@ config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
 	depends on SPARC64 && SMP
 	select HOTPLUG
+	select PERCPU_RWLOCK
 	help
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu/cpu#.
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 225543b..1a6d50d 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1689,6 +1689,7 @@ config PHYSICAL_ALIGN
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
 	depends on SMP && HOTPLUG
+	select PERCPU_RWLOCK
 	---help---
 	  Say Y here to allow turning CPUs off and on. CPUs can be
 	  controlled through /sys/devices/system/cpu.
diff --git a/include/linux/cpu.h b/include/linux/cpu.h
index ce7a074..cf24da1 100644
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -175,6 +175,8 @@ extern struct bus_type cpu_subsys;
 
 extern void get_online_cpus(void);
 extern void put_online_cpus(void);
+extern void get_online_cpus_atomic(void);
+extern void put_online_cpus_atomic(void);
 #define hotcpu_notifier(fn, pri)	cpu_notifier(fn, pri)
 #define register_hotcpu_notifier(nb)	register_cpu_notifier(nb)
 #define unregister_hotcpu_notifier(nb)	unregister_cpu_notifier(nb)
@@ -198,6 +200,8 @@ static inline void cpu_hotplug_driver_unlock(void)
 
 #define get_online_cpus()	do { } while (0)
 #define put_online_cpus()	do { } while (0)
+#define get_online_cpus_atomic()	do { } while (0)
+#define put_online_cpus_atomic()	do { } while (0)
 #define hotcpu_notifier(fn, pri)	do { (void)(fn); } while (0)
 /* These aren't inline functions due to a GCC bug. */
 #define register_hotcpu_notifier(nb)	({ (void)(nb); 0; })
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 3046a50..58dd1df 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -1,6 +1,18 @@
 /* CPU control.
  * (C) 2001, 2002, 2003, 2004 Rusty Russell
  *
+ * Rework of the CPU hotplug offline mechanism to remove its dependence on
+ * the heavy-weight stop_machine() primitive, by Srivatsa S. Bhat and
+ * Paul E. McKenney.
+ *
+ * Copyright (C) IBM Corporation, 2012-2013
+ * Authors: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
+ *          Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+ *
+ * With lots of invaluable suggestions from:
+ *	    Oleg Nesterov <oleg@redhat.com>
+ *	    Tejun Heo <tj@kernel.org>
+ *
  * This code is licenced under the GPL.
  */
 #include <linux/proc_fs.h>
@@ -19,6 +31,7 @@
 #include <linux/mutex.h>
 #include <linux/gfp.h>
 #include <linux/suspend.h>
+#include <linux/percpu-rwlock.h>
 
 #include "smpboot.h"
 
@@ -133,6 +146,38 @@ static void cpu_hotplug_done(void)
 	mutex_unlock(&cpu_hotplug.lock);
 }
 
+/*
+ * Per-CPU Reader-Writer lock to synchronize between atomic hotplug
+ * readers and the CPU offline hotplug writer.
+ */
+DEFINE_STATIC_PERCPU_RWLOCK(hotplug_pcpu_rwlock);
+
+/*
+ * Invoked by atomic hotplug reader (a task which wants to prevent
+ * CPU offline, but which can't afford to sleep), to prevent CPUs from
+ * going offline. So, you can call this function from atomic contexts
+ * (including interrupt handlers).
+ *
+ * Note: This does NOT prevent CPUs from coming online! It only prevents
+ * CPUs from going offline.
+ *
+ * You can call this function recursively.
+ *
+ * Returns with preemption disabled (but interrupts remain as they are;
+ * they are not disabled).
+ */
+void get_online_cpus_atomic(void)
+{
+	percpu_read_lock_irqsafe(&hotplug_pcpu_rwlock);
+}
+EXPORT_SYMBOL_GPL(get_online_cpus_atomic);
+
+void put_online_cpus_atomic(void)
+{
+	percpu_read_unlock_irqsafe(&hotplug_pcpu_rwlock);
+}
+EXPORT_SYMBOL_GPL(put_online_cpus_atomic);
+
 #else /* #if CONFIG_HOTPLUG_CPU */
 static void cpu_hotplug_begin(void) {}
 static void cpu_hotplug_done(void) {}
@@ -246,15 +291,21 @@ struct take_cpu_down_param {
 static int __ref take_cpu_down(void *_param)
 {
 	struct take_cpu_down_param *param = _param;
+	unsigned long flags;
 	int err;
 
+	percpu_write_lock_irqsave(&hotplug_pcpu_rwlock, &flags);
+
 	/* Ensure this CPU doesn't handle any more interrupts. */
 	err = __cpu_disable();
 	if (err < 0)
-		return err;
+		goto out;
 
 	cpu_notify(CPU_DYING | param->mod, param->hcpu);
-	return 0;
+
+out:
+	percpu_write_unlock_irqrestore(&hotplug_pcpu_rwlock, &flags);
+	return err;
 }
 
 /* Requires cpu_add_remove_lock to be held */

  parent reply	other threads:[~2013-02-18 12:41 UTC|newest]

Thread overview: 115+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-02-18 12:38 [PATCH v6 00/46] CPU hotplug: stop_machine()-free CPU hotplug Srivatsa S. Bhat
2013-02-18 12:38 ` [PATCH v6 01/46] percpu_rwlock: Introduce the global reader-writer lock backend Srivatsa S. Bhat
2013-02-18 12:38 ` [PATCH v6 02/46] percpu_rwlock: Introduce per-CPU variables for the reader and the writer Srivatsa S. Bhat
2013-02-18 12:38 ` [PATCH v6 03/46] percpu_rwlock: Provide a way to define and init percpu-rwlocks at compile time Srivatsa S. Bhat
2013-02-18 12:38 ` [PATCH v6 04/46] percpu_rwlock: Implement the core design of Per-CPU Reader-Writer Locks Srivatsa S. Bhat
2013-02-18 15:45   ` Michel Lespinasse
2013-02-18 16:21     ` Srivatsa S. Bhat
2013-02-18 16:31       ` Steven Rostedt
2013-02-18 16:46         ` Srivatsa S. Bhat
2013-02-18 17:56       ` Srivatsa S. Bhat
2013-02-18 18:07         ` Michel Lespinasse
2013-02-18 18:14           ` Srivatsa S. Bhat
2013-02-25 15:53             ` Lai Jiangshan
2013-02-25 19:26               ` Srivatsa S. Bhat
2013-02-26  0:17                 ` Lai Jiangshan
2013-02-26  0:19                   ` Lai Jiangshan
2013-02-26  9:02                   ` Srivatsa S. Bhat
2013-02-26 12:59                     ` Lai Jiangshan
2013-02-26 14:22                       ` Srivatsa S. Bhat
2013-02-26 16:25                         ` Lai Jiangshan
2013-02-26 19:30                           ` Srivatsa S. Bhat
2013-02-27  0:33                             ` Lai Jiangshan
2013-02-27 21:19                               ` Srivatsa S. Bhat
2013-03-01 17:44                                 ` [PATCH] lglock: add read-preference local-global rwlock Lai Jiangshan
2013-03-01 17:53                                   ` Tejun Heo
2013-03-01 20:06                                     ` Srivatsa S. Bhat
2013-03-01 18:28                                   ` Oleg Nesterov
2013-03-02 12:13                                     ` Michel Lespinasse
2013-03-02 13:14                                       ` [PATCH V2] " Lai Jiangshan
2013-03-02 17:11                                         ` Srivatsa S. Bhat
2013-03-05 15:41                                           ` Lai Jiangshan
2013-03-05 17:55                                             ` Srivatsa S. Bhat
2013-03-02 17:20                                         ` Oleg Nesterov
2013-03-03 17:40                                           ` Oleg Nesterov
2013-03-05  1:37                                             ` Michel Lespinasse
2013-03-05 15:27                                           ` Lai Jiangshan
2013-03-05 16:19                                             ` Michel Lespinasse
2013-03-05 16:41                                             ` Oleg Nesterov
2013-03-02 17:06                                       ` [PATCH] " Oleg Nesterov
2013-03-05 15:54                                         ` Lai Jiangshan
2013-03-05 16:32                                           ` Michel Lespinasse
2013-03-05 16:35                                           ` Oleg Nesterov
2013-03-02 13:42                                     ` Lai Jiangshan
2013-03-02 17:01                                       ` Oleg Nesterov
2013-03-01 17:50                                 ` [PATCH v6 04/46] percpu_rwlock: Implement the core design of Per-CPU Reader-Writer Locks Lai Jiangshan
2013-03-01 19:47                                   ` Srivatsa S. Bhat
2013-03-05 16:25                                     ` Lai Jiangshan
2013-03-05 18:27                                       ` Srivatsa S. Bhat
2013-03-01 18:10                                 ` Tejun Heo
2013-03-01 19:59                                   ` Srivatsa S. Bhat
2013-02-27 11:11                             ` Michel Lespinasse
2013-02-27 19:25                               ` Oleg Nesterov
2013-02-28 11:34                                 ` Michel Lespinasse
2013-02-28 18:00                                   ` Oleg Nesterov
2013-02-28 18:20                                     ` Oleg Nesterov
2013-02-26 13:34                 ` Lai Jiangshan
2013-02-26 15:17                   ` Srivatsa S. Bhat
2013-02-26 14:17   ` Lai Jiangshan
2013-02-26 14:37     ` Srivatsa S. Bhat
2013-02-18 12:39 ` [PATCH v6 05/46] percpu_rwlock: Make percpu-rwlocks IRQ-safe, optimally Srivatsa S. Bhat
2013-02-18 12:39 ` [PATCH v6 06/46] percpu_rwlock: Rearrange the read-lock code to fastpath nested percpu readers Srivatsa S. Bhat
2013-02-18 12:39 ` [PATCH v6 07/46] percpu_rwlock: Allow writers to be readers, and add lockdep annotations Srivatsa S. Bhat
2013-02-18 15:51   ` Michel Lespinasse
2013-02-18 16:31     ` Srivatsa S. Bhat
2013-02-18 12:39 ` Srivatsa S. Bhat [this message]
2013-02-18 16:23   ` [PATCH v6 08/46] CPU hotplug: Provide APIs to prevent CPU offline from atomic context Michel Lespinasse
2013-02-18 16:43     ` Srivatsa S. Bhat
2013-02-18 17:21       ` Michel Lespinasse
2013-02-18 18:50         ` Srivatsa S. Bhat
2013-02-19  9:40           ` Michel Lespinasse
2013-02-19  9:55             ` Srivatsa S. Bhat
2013-02-19 10:42               ` David Laight
2013-02-19 10:58                 ` Srivatsa S. Bhat
2013-02-18 12:39 ` [PATCH v6 09/46] CPU hotplug: Convert preprocessor macros to static inline functions Srivatsa S. Bhat
2013-02-18 12:39 ` [PATCH v6 10/46] smp, cpu hotplug: Fix smp_call_function_*() to prevent CPU offline properly Srivatsa S. Bhat
2013-02-18 12:39 ` [PATCH v6 11/46] smp, cpu hotplug: Fix on_each_cpu_*() " Srivatsa S. Bhat
2013-02-18 12:40 ` [PATCH v6 12/46] sched/timer: Use get/put_online_cpus_atomic() to prevent CPU offline Srivatsa S. Bhat
2013-02-18 12:40 ` [PATCH v6 13/46] sched/migration: Use raw_spin_lock/unlock since interrupts are already disabled Srivatsa S. Bhat
2013-02-18 12:40 ` [PATCH v6 14/46] sched/rt: Use get/put_online_cpus_atomic() to prevent CPU offline Srivatsa S. Bhat
2013-02-18 12:40 ` [PATCH v6 15/46] tick: " Srivatsa S. Bhat
2013-02-18 12:40 ` [PATCH v6 16/46] time/clocksource: " Srivatsa S. Bhat
2013-02-18 12:40 ` [PATCH v6 17/46] clockevents: Use get/put_online_cpus_atomic() in clockevents_notify() Srivatsa S. Bhat
2013-02-18 12:40 ` [PATCH v6 18/46] softirq: Use get/put_online_cpus_atomic() to prevent CPU offline Srivatsa S. Bhat
2013-02-18 12:40 ` [PATCH v6 19/46] irq: " Srivatsa S. Bhat
2013-02-18 12:41 ` [PATCH v6 20/46] net: " Srivatsa S. Bhat
2013-02-18 12:41 ` [PATCH v6 21/46] block: " Srivatsa S. Bhat
2013-02-18 12:41 ` [PATCH v6 22/46] crypto: pcrypt - Protect access to cpu_online_mask with get/put_online_cpus() Srivatsa S. Bhat
2013-02-18 12:41 ` [PATCH v6 23/46] infiniband: ehca: Use get/put_online_cpus_atomic() to prevent CPU offline Srivatsa S. Bhat
2013-02-18 12:41 ` [PATCH v6 24/46] [SCSI] fcoe: " Srivatsa S. Bhat
2013-02-18 12:41 ` [PATCH v6 25/46] staging: octeon: " Srivatsa S. Bhat
2013-02-18 12:41 ` [PATCH v6 26/46] x86: " Srivatsa S. Bhat
2013-02-18 12:42 ` [PATCH v6 27/46] perf/x86: " Srivatsa S. Bhat
2013-02-18 12:42 ` [PATCH v6 28/46] KVM: Use get/put_online_cpus_atomic() to prevent CPU offline from atomic context Srivatsa S. Bhat
2013-02-18 12:42 ` [PATCH v6 29/46] kvm/vmx: Use get/put_online_cpus_atomic() to prevent CPU offline Srivatsa S. Bhat
2013-02-18 12:42 ` [PATCH v6 30/46] x86/xen: " Srivatsa S. Bhat
2013-02-18 12:42 ` [PATCH v6 31/46] alpha/smp: " Srivatsa S. Bhat
2013-02-18 12:42 ` [PATCH v6 32/46] blackfin/smp: " Srivatsa S. Bhat
2013-02-18 12:42 ` [PATCH v6 33/46] cris/smp: " Srivatsa S. Bhat
2013-02-18 13:07   ` Jesper Nilsson
2013-02-18 12:43 ` [PATCH v6 34/46] hexagon/smp: " Srivatsa S. Bhat
2013-02-18 12:43 ` [PATCH v6 35/46] ia64: " Srivatsa S. Bhat
2013-02-18 12:43 ` [PATCH v6 36/46] m32r: " Srivatsa S. Bhat
2013-02-18 12:43 ` [PATCH v6 37/46] MIPS: " Srivatsa S. Bhat
2013-02-18 12:43 ` [PATCH v6 38/46] mn10300: " Srivatsa S. Bhat
2013-02-18 12:43 ` [PATCH v6 39/46] parisc: " Srivatsa S. Bhat
2013-02-18 12:43 ` [PATCH v6 40/46] powerpc: " Srivatsa S. Bhat
2013-02-18 12:44 ` [PATCH v6 41/46] sh: " Srivatsa S. Bhat
2013-02-18 12:44 ` [PATCH v6 42/46] sparc: " Srivatsa S. Bhat
2013-02-18 12:44 ` [PATCH v6 43/46] tile: " Srivatsa S. Bhat
2013-02-18 12:44 ` [PATCH v6 44/46] cpu: No more __stop_machine() in _cpu_down() Srivatsa S. Bhat
2013-02-18 12:44 ` [PATCH v6 45/46] CPU hotplug, stop_machine: Decouple CPU hotplug from stop_machine() in Kconfig Srivatsa S. Bhat
2013-02-18 12:44 ` [PATCH v6 46/46] Documentation/cpu-hotplug: Remove references to stop_machine() Srivatsa S. Bhat
2013-02-22  0:31 ` [PATCH v6 00/46] CPU hotplug: stop_machine()-free CPU hotplug Rusty Russell
2013-02-25 21:45   ` Srivatsa S. Bhat
2013-03-01 12:05 ` Vincent Guittot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130218123920.26245.56709.stgit@srivatsabhat.in.ibm.com \
    --to=srivatsa.bhat@linux.vnet.ibm.com \
    --cc=akpm@linux-foundation.org \
    --cc=fweisbec@gmail.com \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mingo@kernel.org \
    --cc=namhyung@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=nikunj@linux.vnet.ibm.com \
    --cc=oleg@redhat.com \
    --cc=paulmck@linux.vnet.ibm.com \
    --cc=peterz@infradead.org \
    --cc=rjw@sisk.pl \
    --cc=rostedt@goodmis.org \
    --cc=rusty@rustcorp.com.au \
    --cc=sbw@mit.edu \
    --cc=tglx@linutronix.de \
    --cc=tj@kernel.org \
    --cc=vincent.guittot@linaro.org \
    --cc=walken@google.com \
    --cc=wangyun@linux.vnet.ibm.com \
    --cc=xiaoguangrong@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).