From: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 2/2] powerpc/powernv: Interface to register/unregister opal dump region
Date: Sat, 09 Aug 2014 11:15:45 +0530 [thread overview]
Message-ID: <20140809054540.17676.34572.stgit@hegdevasant.in.ibm.com> (raw)
In-Reply-To: <20140809054424.17676.1090.stgit@hegdevasant.in.ibm.com>
PowerNV platform is capable of capturing host memory region when system
crashes (because of host/firmware). We have new OPAL API to register/
unregister memory region to be captured when system crashes.
This patch adds support for new API. Also during boot time we register
kernel log buffer and unregister before doing kexec.
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/include/asm/opal.h | 11 +++++++++++
arch/powerpc/platforms/powernv/opal-wrappers.S | 2 ++
arch/powerpc/platforms/powernv/opal.c | 23 +++++++++++++++++++++++
3 files changed, 36 insertions(+)
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index b2f8ce1..86055e5 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -149,6 +149,8 @@ struct opal_sg_list {
#define OPAL_DUMP_INFO2 94
#define OPAL_PCI_EEH_FREEZE_SET 97
#define OPAL_HANDLE_HMI 98
+#define OPAL_REGISTER_DUMP_REGION 101
+#define OPAL_UNREGISTER_DUMP_REGION 102
#ifndef __ASSEMBLY__
@@ -920,6 +922,8 @@ int64_t opal_set_param(uint64_t token, uint32_t param_id, uint64_t buffer,
uint64_t length);
int64_t opal_sensor_read(uint32_t sensor_hndl, int token, __be32 *sensor_data);
int64_t opal_handle_hmi(void);
+int64_t opal_register_dump_region(uint32_t id, uint64_t start, uint64_t end);
+int64_t opal_unregister_dump_region(uint32_t id);
/* Internal functions */
extern int early_init_dt_scan_opal(unsigned long node, const char *uname,
@@ -974,6 +978,13 @@ struct opal_sg_list *opal_vmalloc_to_sg_list(void *vmalloc_addr,
unsigned long vmalloc_size);
void opal_free_sg_list(struct opal_sg_list *sg);
+/*
+ * Dump region ID range usable by the OS
+ */
+#define OPAL_DUMP_REGION_HOST_START 0x80
+#define OPAL_DUMP_REGION_LOG_BUF 0x80
+#define OPAL_DUMP_REGION_HOST_END 0xFF
+
#endif /* __ASSEMBLY__ */
#endif /* __OPAL_H */
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index a328be4..2e6ce1b 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -245,3 +245,5 @@ OPAL_CALL(opal_sensor_read, OPAL_SENSOR_READ);
OPAL_CALL(opal_get_param, OPAL_GET_PARAM);
OPAL_CALL(opal_set_param, OPAL_SET_PARAM);
OPAL_CALL(opal_handle_hmi, OPAL_HANDLE_HMI);
+OPAL_CALL(opal_register_dump_region, OPAL_REGISTER_DUMP_REGION);
+OPAL_CALL(opal_unregister_dump_region, OPAL_UNREGISTER_DUMP_REGION);
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index f0a01a4..b44eec3 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -605,6 +605,24 @@ static int opal_sysfs_init(void)
return 0;
}
+static void __init opal_dump_region_init(void)
+{
+ void *addr;
+ uint64_t size;
+ int rc;
+
+ /* Register kernel log buffer */
+ addr = log_buf_addr_get();
+ size = log_buf_len_get();
+ rc = opal_register_dump_region(OPAL_DUMP_REGION_LOG_BUF,
+ __pa(addr), size);
+ /* Don't warn if this is just an older OPAL that doesn't
+ * know about that call
+ */
+ if (rc && rc != OPAL_UNSUPPORTED)
+ pr_warn("DUMP: Failed to register kernel log buffer. "
+ "rc = %d\n", rc);
+}
static int __init opal_init(void)
{
struct device_node *np, *consoles;
@@ -654,6 +672,8 @@ static int __init opal_init(void)
/* Create "opal" kobject under /sys/firmware */
rc = opal_sysfs_init();
if (rc == 0) {
+ /* Setup dump region interface */
+ opal_dump_region_init();
/* Setup error log interface */
rc = opal_elog_init();
/* Setup code update interface */
@@ -694,6 +714,9 @@ void opal_shutdown(void)
else
mdelay(10);
}
+
+ /* Unregister memory dump region */
+ opal_unregister_dump_region(OPAL_DUMP_REGION_LOG_BUF);
}
/* Export this so that test modules can use it */
next prev parent reply other threads:[~2014-08-09 5:45 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-09 5:45 [PATCH v3 1/2] printk: Add function to return log buffer address and size Vasant Hegde
2014-08-09 5:45 ` Vasant Hegde [this message]
2014-08-11 1:13 ` Benjamin Herrenschmidt
2014-08-12 21:47 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140809054540.17676.34572.stgit@hegdevasant.in.ibm.com \
--to=hegdevasant@linux.vnet.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).