linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Nicolin Chen <nicoleotsuka@gmail.com>
To: Shengjiu Wang <shengjiu.wang@freescale.com>
Cc: alsa-devel@alsa-project.org, lgirdwood@gmail.com, tiwai@suse.de,
	Li.Xiubo@freescale.com, timur@tabi.org, perex@perex.cz,
	broonie@kernel.org, mpa@pengutronix.de,
	linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH V4] ASoC: fsl_ssi: refine ipg clock usage in this module
Date: Wed, 17 Sep 2014 10:42:32 -0700	[thread overview]
Message-ID: <20140917174231.GA6480@Asurada> (raw)
In-Reply-To: <5dc0f13cdb62904ae0f104f9112faec672adea6f.1410833402.git.shengjiu.wang@freescale.com>

On Tue, Sep 16, 2014 at 10:13:16AM +0800, Shengjiu Wang wrote:
> Check if ipg clock is in clock-names property, then we can move the
> ipg clock enable and disable operation to startup and shutdown, that
> is only enable ipg clock when ssi is working and keep clock is disabled
> when ssi is in idle.
> But when the checking is failed, remain the clock control as before.
> 
> Tested-by: Markus Pargmann <mpa@pengutronix.de>
> Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>

Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>

> ---
> v4 change log:
> fix the code indent issue.
> 
>  sound/soc/fsl/fsl_ssi.c |   53 ++++++++++++++++++++++++++++++++++++++++-------
>  1 file changed, 45 insertions(+), 8 deletions(-)
> 
> diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
> index 2fc3e66..16a1361 100644
> --- a/sound/soc/fsl/fsl_ssi.c
> +++ b/sound/soc/fsl/fsl_ssi.c
> @@ -169,6 +169,7 @@ struct fsl_ssi_private {
>  	u8 i2s_mode;
>  	bool use_dma;
>  	bool use_dual_fifo;
> +	bool has_ipg_clk_name;
>  	unsigned int fifo_depth;
>  	struct fsl_ssi_rxtx_reg_val rxtx_reg_val;
>  
> @@ -530,6 +531,11 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream,
>  	struct snd_soc_pcm_runtime *rtd = substream->private_data;
>  	struct fsl_ssi_private *ssi_private =
>  		snd_soc_dai_get_drvdata(rtd->cpu_dai);
> +	int ret;
> +
> +	ret = clk_prepare_enable(ssi_private->clk);
> +	if (ret)
> +		return ret;
>  
>  	/* When using dual fifo mode, it is safer to ensure an even period
>  	 * size. If appearing to an odd number while DMA always starts its
> @@ -544,6 +550,21 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream,
>  }
>  
>  /**
> + * fsl_ssi_shutdown: shutdown the SSI
> + *
> + */
> +static void fsl_ssi_shutdown(struct snd_pcm_substream *substream,
> +				struct snd_soc_dai *dai)
> +{
> +	struct snd_soc_pcm_runtime *rtd = substream->private_data;
> +	struct fsl_ssi_private *ssi_private =
> +		snd_soc_dai_get_drvdata(rtd->cpu_dai);
> +
> +	clk_disable_unprepare(ssi_private->clk);
> +
> +}
> +
> +/**
>   * fsl_ssi_set_bclk - configure Digital Audio Interface bit clock
>   *
>   * Note: This function can be only called when using SSI as DAI master
> @@ -1043,6 +1064,7 @@ static int fsl_ssi_dai_probe(struct snd_soc_dai *dai)
>  
>  static const struct snd_soc_dai_ops fsl_ssi_dai_ops = {
>  	.startup	= fsl_ssi_startup,
> +	.shutdown       = fsl_ssi_shutdown,
>  	.hw_params	= fsl_ssi_hw_params,
>  	.hw_free	= fsl_ssi_hw_free,
>  	.set_fmt	= fsl_ssi_set_dai_fmt,
> @@ -1168,17 +1190,22 @@ static int fsl_ssi_imx_probe(struct platform_device *pdev,
>  	u32 dmas[4];
>  	int ret;
>  
> -	ssi_private->clk = devm_clk_get(&pdev->dev, NULL);
> +	if (ssi_private->has_ipg_clk_name)
> +		ssi_private->clk = devm_clk_get(&pdev->dev, "ipg");
> +	else
> +		ssi_private->clk = devm_clk_get(&pdev->dev, NULL);
>  	if (IS_ERR(ssi_private->clk)) {
>  		ret = PTR_ERR(ssi_private->clk);
>  		dev_err(&pdev->dev, "could not get clock: %d\n", ret);
>  		return ret;
>  	}
>  
> -	ret = clk_prepare_enable(ssi_private->clk);
> -	if (ret) {
> -		dev_err(&pdev->dev, "clk_prepare_enable failed: %d\n", ret);
> -		return ret;
> +	if (!ssi_private->has_ipg_clk_name) {
> +		ret = clk_prepare_enable(ssi_private->clk);
> +		if (ret) {
> +			dev_err(&pdev->dev, "clk_prepare_enable failed: %d\n", ret);
> +			return ret;
> +		}
>  	}
>  
>  	/* For those SLAVE implementations, we ingore non-baudclk cases
> @@ -1236,8 +1263,9 @@ static int fsl_ssi_imx_probe(struct platform_device *pdev,
>  	return 0;
>  
>  error_pcm:
> -	clk_disable_unprepare(ssi_private->clk);
>  
> +	if (!ssi_private->has_ipg_clk_name)
> +		clk_disable_unprepare(ssi_private->clk);
>  	return ret;
>  }
>  
> @@ -1246,7 +1274,8 @@ static void fsl_ssi_imx_clean(struct platform_device *pdev,
>  {
>  	if (!ssi_private->use_dma)
>  		imx_pcm_fiq_exit(pdev);
> -	clk_disable_unprepare(ssi_private->clk);
> +	if (!ssi_private->has_ipg_clk_name)
> +		clk_disable_unprepare(ssi_private->clk);
>  }
>  
>  static int fsl_ssi_probe(struct platform_device *pdev)
> @@ -1321,8 +1350,16 @@ static int fsl_ssi_probe(struct platform_device *pdev)
>  		return -ENOMEM;
>  	}
>  
> -	ssi_private->regs = devm_regmap_init_mmio(&pdev->dev, iomem,
> +	ret = of_property_match_string(np, "clock-names", "ipg");
> +	if (ret < 0) {
> +		ssi_private->has_ipg_clk_name = false;
> +		ssi_private->regs = devm_regmap_init_mmio(&pdev->dev, iomem,
>  			&fsl_ssi_regconfig);
> +	} else {
> +		ssi_private->has_ipg_clk_name = true;
> +		ssi_private->regs = devm_regmap_init_mmio_clk(&pdev->dev,
> +			"ipg", iomem, &fsl_ssi_regconfig);
> +	}
>  	if (IS_ERR(ssi_private->regs)) {
>  		dev_err(&pdev->dev, "Failed to init register map\n");
>  		return PTR_ERR(ssi_private->regs);
> -- 
> 1.7.9.5
> 

  reply	other threads:[~2014-09-17 17:42 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-16  2:13 [PATCH V4] ASoC: fsl_ssi: refine ipg clock usage in this module Shengjiu Wang
2014-09-17 17:42 ` Nicolin Chen [this message]
2014-09-17 18:30 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140917174231.GA6480@Asurada \
    --to=nicoleotsuka@gmail.com \
    --cc=Li.Xiubo@freescale.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpa@pengutronix.de \
    --cc=perex@perex.cz \
    --cc=shengjiu.wang@freescale.com \
    --cc=timur@tabi.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).