linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Finn Thain <fthain@telegraphics.com.au>
To: <linux-kernel@vger.kernel.org>, <linux-m68k@vger.kernel.org>,
	<linuxppc-dev@lists.ozlabs.org>,
	Geert Uytterhoeven <geert@linux-m68k.org>
Subject: [RFC v5 23/26] m68k/mac: Adopt naming and calling conventions for PRAM routines
Date: Sat, 25 Jul 2015 17:46:22 +1000	[thread overview]
Message-ID: <20150725074605.143283098@telegraphics.com.au> (raw)
In-Reply-To: 20150725074559.543547894@telegraphics.com.au

Adopt the existing *_read_byte and *_write_byte naming convention.
Rename via_pram_readbyte and via_pram_writebyte to avoid confusion.
Adjust calling conventions of mac_pram_* functions to match the
arch_nvram_ops struct methods.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>

---

Changes since v1:
- Don't introduce the arch_nvram_ops struct in this patch, even if it 
would form a logical progression. Since the struct would get replaced
later on, some might see it as churn.

Changes since v2:
- Rename via_pram_send() and via_pram_recv() as
via_rtc_send() and via_rtc_recv() resp.

---
 arch/m68k/mac/misc.c |   91 +++++++++++++++++++++++++--------------------------
 1 file changed, 46 insertions(+), 45 deletions(-)

Index: linux/arch/m68k/mac/misc.c
===================================================================
--- linux.orig/arch/m68k/mac/misc.c	2015-07-25 17:42:33.000000000 +1000
+++ linux/arch/m68k/mac/misc.c	2015-07-25 17:45:53.000000000 +1000
@@ -61,7 +61,7 @@ static void cuda_write_time(long data)
 		cuda_poll();
 }
 
-static __u8 cuda_read_pram(int offset)
+static unsigned char cuda_pram_read_byte(int offset)
 {
 	struct adb_request req;
 	if (cuda_request(&req, NULL, 4, CUDA_PACKET, CUDA_GET_PRAM,
@@ -72,7 +72,7 @@ static __u8 cuda_read_pram(int offset)
 	return req.reply[3];
 }
 
-static void cuda_write_pram(int offset, __u8 data)
+static void cuda_pram_write_byte(unsigned char data, int offset)
 {
 	struct adb_request req;
 	if (cuda_request(&req, NULL, 5, CUDA_PACKET, CUDA_SET_PRAM,
@@ -84,8 +84,8 @@ static void cuda_write_pram(int offset,
 #else
 #define cuda_read_time() 0
 #define cuda_write_time(n)
-#define cuda_read_pram NULL
-#define cuda_write_pram NULL
+#define cuda_pram_read_byte NULL
+#define cuda_pram_write_byte NULL
 #endif
 
 #ifdef CONFIG_ADB_PMU68K
@@ -116,7 +116,7 @@ static void pmu_write_time(long data)
 		pmu_poll();
 }
 
-static __u8 pmu_read_pram(int offset)
+static unsigned char pmu_pram_read_byte(int offset)
 {
 	struct adb_request req;
 	if (pmu_request(&req, NULL, 3, PMU_READ_NVRAM,
@@ -127,7 +127,7 @@ static __u8 pmu_read_pram(int offset)
 	return req.reply[3];
 }
 
-static void pmu_write_pram(int offset, __u8 data)
+static void pmu_pram_write_byte(unsigned char data, int offset)
 {
 	struct adb_request req;
 	if (pmu_request(&req, NULL, 4, PMU_WRITE_NVRAM,
@@ -139,8 +139,8 @@ static void pmu_write_pram(int offset, _
 #else
 #define pmu_read_time() 0
 #define pmu_write_time(n)
-#define pmu_read_pram NULL
-#define pmu_write_pram NULL
+#define pmu_pram_read_byte NULL
+#define pmu_pram_write_byte NULL
 #endif
 
 #if 0 /* def CONFIG_ADB_MACIISI */
@@ -169,7 +169,7 @@ static void maciisi_write_time(long data
 			(data >> 8) & 0xFF, data & 0xFF);
 }
 
-static __u8 maciisi_read_pram(int offset)
+static unsigned char maciisi_pram_read_byte(int offset)
 {
 	struct adb_request req;
 	if (maciisi_request(&req, NULL, 4, CUDA_PACKET, CUDA_GET_PRAM,
@@ -178,7 +178,7 @@ static __u8 maciisi_read_pram(int offset
 	return req.reply[3];
 }
 
-static void maciisi_write_pram(int offset, __u8 data)
+static void maciisi_pram_write_byte(unsigned char data, int offset)
 {
 	struct adb_request req;
 	maciisi_request(&req, NULL, 5, CUDA_PACKET, CUDA_SET_PRAM,
@@ -187,8 +187,8 @@ static void maciisi_write_pram(int offse
 #else
 #define maciisi_read_time() 0
 #define maciisi_write_time(n)
-#define maciisi_read_pram NULL
-#define maciisi_write_pram NULL
+#define maciisi_pram_read_byte NULL
+#define maciisi_pram_write_byte NULL
 #endif
 
 /*
@@ -198,7 +198,7 @@ static void maciisi_write_pram(int offse
  * the RTC should be enabled.
  */
 
-static __u8 via_pram_readbyte(void)
+static __u8 via_rtc_recv(void)
 {
 	int	i,reg;
 	__u8	data;
@@ -225,7 +225,7 @@ static __u8 via_pram_readbyte(void)
 	return data;
 }
 
-static void via_pram_writebyte(__u8 data)
+static void via_rtc_send(__u8 data)
 {
 	int	i,reg,bit;
 
@@ -262,17 +262,17 @@ static void via_pram_command(int command
 	via1[vBufB] = (via1[vBufB] | VIA1B_vRTCClk) & ~VIA1B_vRTCEnb;
 
 	if (command & 0xFF00) {		/* extended (two-byte) command */
-		via_pram_writebyte((command & 0xFF00) >> 8);
-		via_pram_writebyte(command & 0xFF);
+		via_rtc_send((command & 0xFF00) >> 8);
+		via_rtc_send(command & 0xFF);
 		is_read = command & 0x8000;
 	} else {			/* one-byte command */
-		via_pram_writebyte(command);
+		via_rtc_send(command);
 		is_read = command & 0x80;
 	}
 	if (is_read) {
-		*data = via_pram_readbyte();
+		*data = via_rtc_recv();
 	} else {
-		via_pram_writebyte(*data);
+		via_rtc_send(*data);
 	}
 
 	/* All done, disable the RTC */
@@ -282,12 +282,12 @@ static void via_pram_command(int command
 	local_irq_restore(flags);
 }
 
-static __u8 via_read_pram(int offset)
+static unsigned char via_pram_read_byte(int offset)
 {
 	return 0;
 }
 
-static void via_write_pram(int offset, __u8 data)
+static void via_pram_write_byte(unsigned char data, int offset)
 {
 }
 
@@ -453,50 +453,51 @@ void pmu_shutdown(void)
  *-------------------------------------------------------------------
  */
 
-void mac_pram_read(int offset, __u8 *buffer, int len)
+unsigned char mac_pram_read_byte(int addr)
 {
-	__u8 (*func)(int);
-	int i;
+	unsigned char (*func)(int);
 
 	switch(macintosh_config->adb_type) {
 	case MAC_ADB_IISI:
-		func = maciisi_read_pram; break;
+		func = maciisi_pram_read_byte;
+		break;
 	case MAC_ADB_PB1:
 	case MAC_ADB_PB2:
-		func = pmu_read_pram; break;
+		func = pmu_pram_read_byte;
+		break;
 	case MAC_ADB_CUDA:
-		func = cuda_read_pram; break;
+		func = cuda_pram_read_byte;
+		break;
 	default:
-		func = via_read_pram;
-	}
-	if (!func)
-		return;
-	for (i = 0 ; i < len ; i++) {
-		buffer[i] = (*func)(offset++);
+		func = via_pram_read_byte;
 	}
+
+	if (func)
+		return (*func)(addr);
+	return 0xff;
 }
 
-void mac_pram_write(int offset, __u8 *buffer, int len)
+void mac_pram_write_byte(unsigned char val, int addr)
 {
-	void (*func)(int, __u8);
-	int i;
+	void (*func)(unsigned char, int);
 
 	switch(macintosh_config->adb_type) {
 	case MAC_ADB_IISI:
-		func = maciisi_write_pram; break;
+		func = maciisi_pram_write_byte;
+		break;
 	case MAC_ADB_PB1:
 	case MAC_ADB_PB2:
-		func = pmu_write_pram; break;
+		func = pmu_pram_write_byte;
+		break;
 	case MAC_ADB_CUDA:
-		func = cuda_write_pram; break;
+		func = cuda_pram_write_byte;
+		break;
 	default:
-		func = via_write_pram;
-	}
-	if (!func)
-		return;
-	for (i = 0 ; i < len ; i++) {
-		(*func)(offset++, buffer[i]);
+		func = via_pram_write_byte;
 	}
+
+	if (func)
+		(*func)(val, addr);
 }
 
 void mac_poweroff(void)

  parent reply	other threads:[~2015-07-25  7:56 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-25  7:45 [RFC v5 00/26] Re-use nvram module Finn Thain
2015-07-25  7:46 ` [RFC v5 01/26] scsi/atari_scsi: Dont select CONFIG_NVRAM Finn Thain
2015-07-25  7:46 ` [RFC v5 02/26] char/nvram: Use bitwise OR to obtain Atari video mode data Finn Thain
2015-07-25  7:46 ` [RFC v5 03/26] m68k/atari: Move Atari-specific code out of drivers/char/nvram.c Finn Thain
2015-07-25  7:46 ` [RFC v5 04/26] m68k/atari: Replace nvram_{read, write}_byte with arch_nvram_ops Finn Thain
2015-07-25  7:46 ` [RFC v5 05/26] char/nvram: Re-order functions to remove forward declarations and #ifdefs Finn Thain
2015-07-25  7:46 ` [RFC v5 06/26] char/nvram: Adopt arch_nvram_ops Finn Thain
2015-07-25  7:46 ` [RFC v5 07/26] x86/thinkpad_acpi: Use arch_nvram_ops methods instead of nvram_read_byte() and nvram_write_byte() Finn Thain
2015-07-25  7:46 ` [RFC v5 08/26] char/nvram: Allow the set_checksum and initialize ioctls to be omitted Finn Thain
2015-07-25  7:46 ` [RFC v5 09/26] char/nvram: Implement NVRAM read/write methods Finn Thain
2015-07-25  7:46 ` [RFC v5 10/26] char/nvram: Use generic fixed_size_llseek() Finn Thain
2015-07-25  7:46 ` [RFC v5 11/26] m68k/atari: Implement arch_nvram_ops methods and enable CONFIG_HAVE_ARCH_NVRAM_OPS Finn Thain
2015-07-25  7:46 ` [RFC v5 12/26] char/nvram: Add "devname:nvram" module alias Finn Thain
2015-07-25  7:46 ` [RFC v5 13/26] powerpc: Cleanup nvram includes Finn Thain
2015-07-25  7:46 ` [RFC v5 14/26] powerpc: Add missing ppc_md.nvram_size for CHRP and PowerMac Finn Thain
2015-07-25  7:46 ` [RFC v5 15/26] powerpc: Implement arch_nvram_ops.get_size() and remove old nvram_* exports Finn Thain
2015-07-25  7:46 ` [RFC v5 16/26] powerpc: Implement nvram sync ioctl Finn Thain
2015-07-25  7:46 ` [RFC v5 17/26] powerpc, fbdev: Use NV_CMODE and NV_VMODE only when CONFIG_PPC32 and CONFIG_PPC_PMAC and CONFIG_NVRAM Finn Thain
2015-07-25  7:46 ` [RFC v5 18/26] powerpc, fbdev: Use arch_nvram_ops methods instead of nvram_read_byte() and nvram_write_byte() Finn Thain
2015-07-25  7:46 ` [RFC v5 19/26] nvram: Drop nvram_* symbol exports and prototypes Finn Thain
2015-07-25  7:46 ` [RFC v5 20/26] powerpc: Remove CONFIG_GENERIC_NVRAM and adopt CONFIG_HAVE_ARCH_NVRAM_OPS Finn Thain
2015-07-25  7:46 ` [RFC v5 21/26] char/generic_nvram: Remove as unused Finn Thain
2015-07-25  7:46 ` [RFC v5 22/26] powerpc: Adopt nvram module for PPC64 Finn Thain
2015-07-25  7:46 ` Finn Thain [this message]
2015-07-25  7:46 ` [RFC v5 24/26] m68k/mac: Use macros for RTC accesses not magic numbers Finn Thain
2015-07-25  7:46 ` [RFC v5 25/26] m68k/mac: Fix PRAM accessors Finn Thain
2015-07-25  7:46 ` [RFC v5 26/26] m68k: Dispatch nvram_ops calls to Atari or Mac functions Finn Thain
2015-08-16  9:15 ` [RFC v5 00/26] Re-use nvram module Geert Uytterhoeven
2015-08-17  8:04   ` Finn Thain
2015-08-17  8:20     ` Geert Uytterhoeven
2015-08-17  8:48       ` Finn Thain

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150725074605.143283098@telegraphics.com.au \
    --to=fthain@telegraphics.com.au \
    --cc=geert@linux-m68k.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-m68k@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).