linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>,
	Frederic Barrat <fbarrat@linux.vnet.ibm.com>,
	Andrew Donnellan <andrew.donnellan@au1.ibm.com>,
	Ian Munsie <imunsie@au1.ibm.com>,
	Christophe Lombard <christophe_lombard@fr.ibm.com>,
	Philippe Bergheaud <philippe.bergheaud@fr.ibm.com>,
	Greg Kurz <gkurz@linux.vnet.ibm.com>,
	"Alastair D'Silva" <alastair@au1.ibm.com>,
	stable@vger.kernel.org
Subject: [PATCH-RESEND v4] cxl: Force context lock during EEH flow
Date: Thu, 27 Apr 2017 10:53:25 +0530	[thread overview]
Message-ID: <20170427052325.11818-1-vaibhav@linux.vnet.ibm.com> (raw)

During an eeh event when the cxl card is fenced and card sysfs attr
perst_reloads_same_image is set following warning message is seen in the
kernel logs:

 [   60.622727] Adapter context unlocked with 0 active contexts
 [   60.622762] ------------[ cut here ]------------
 [   60.622771] WARNING: CPU: 12 PID: 627 at
 ../drivers/misc/cxl/main.c:325 cxl_adapter_context_unlock+0x60/0x80 [cxl]

Even though this warning is harmless, it clutters the kernel log
during an eeh event. This warning is triggered as the EEH callback
cxl_pci_error_detected doesn't obtain a context-lock before forcibly
detaching all active context and when context-lock is released during
call to cxl_configure_adapter from cxl_pci_slot_reset, a warning in
cxl_adapter_context_unlock is triggered.

To fix this warning, we acquire the adapter context-lock via
cxl_adapter_context_lock() in the eeh callback
cxl_pci_error_detected() once all the virtual AFU PHBs are notified
and their contexts detached. The context-lock is released in
cxl_pci_slot_reset() after the adapter is successfully reconfigured
and before the we call the slot_reset callback on slice attached
device-drivers.

Cc: stable@vger.kernel.org
Fixes: 70b565bbdb91("cxl: Prevent adapter reset if an active context exists")
Reported-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Tested-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
---
Change-Log:

Resend
- Added Acks and Sign-offs.

v3..v4
- Moved the call to context-unlock from cxl_pci_resume to
cxl_pci_slot_reset to let cxlflash module activate its master context
during slot reset. (Fred)

v2..v3
- As discussed with Fred removed function
cxl_adapter_context_force_lock() which may potentially expose the code
to deadlock in the future.
-  Other details of changes in cxl_pci_error_detected() to fix an
earlier issue of eeh callbacks not being passed on to all slices, is
being reworked as a separate patch.

v2..v1
- Moved the call to cxl_adapter_context_force_lock() from
cxl_pci_error_detected() to cxl_remove. (Fred)
---
 drivers/misc/cxl/pci.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index b27ea98..dd9a128 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -1496,8 +1496,6 @@ static int cxl_configure_adapter(struct cxl *adapter, struct pci_dev *dev)
 	if ((rc = cxl_native_register_psl_err_irq(adapter)))
 		goto err;
 
-	/* Release the context lock as adapter is configured */
-	cxl_adapter_context_unlock(adapter);
 	return 0;
 
 err:
@@ -1596,6 +1594,9 @@ static struct cxl *cxl_pci_init_adapter(struct pci_dev *dev)
 	if ((rc = cxl_sysfs_adapter_add(adapter)))
 		goto err_put1;
 
+	/* Release the context lock as adapter is configured */
+	cxl_adapter_context_unlock(adapter);
+
 	return adapter;
 
 err_put1:
@@ -1895,6 +1896,13 @@ static pci_ers_result_t cxl_pci_error_detected(struct pci_dev *pdev,
 		cxl_ops->afu_deactivate_mode(afu, afu->current_mode);
 		pci_deconfigure_afu(afu);
 	}
+
+	/* should take the context lock here */
+	if (cxl_adapter_context_lock(adapter) != 0)
+		dev_warn(&adapter->dev,
+			 "Couldn't take context lock with %d active-contexts\n",
+			 atomic_read(&adapter->contexts_num));
+
 	cxl_deconfigure_adapter(adapter);
 
 	return result;
@@ -1913,6 +1921,13 @@ static pci_ers_result_t cxl_pci_slot_reset(struct pci_dev *pdev)
 	if (cxl_configure_adapter(adapter, pdev))
 		goto err;
 
+	/*
+	 * Unlock context activation for the adapter. Ideally this should be
+	 * done in cxl_pci_resume but cxlflash module tries to activate the
+	 * master context as part of slot_reset callback.
+	 */
+	cxl_adapter_context_unlock(adapter);
+
 	for (i = 0; i < adapter->slices; i++) {
 		afu = adapter->afu[i];
 
-- 
2.9.3

             reply	other threads:[~2017-04-27  5:25 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-27  5:23 Vaibhav Jain [this message]
2017-05-03 22:18 ` [PATCH-RESEND,v4] cxl: Force context lock during EEH flow Michael Ellerman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170427052325.11818-1-vaibhav@linux.vnet.ibm.com \
    --to=vaibhav@linux.vnet.ibm.com \
    --cc=alastair@au1.ibm.com \
    --cc=andrew.donnellan@au1.ibm.com \
    --cc=christophe_lombard@fr.ibm.com \
    --cc=fbarrat@linux.vnet.ibm.com \
    --cc=gkurz@linux.vnet.ibm.com \
    --cc=imunsie@au1.ibm.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=philippe.bergheaud@fr.ibm.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).