From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: linuxppc-dev@lists.ozlabs.org
Cc: aneesh.kumar@linux.vnet.ibm.com,
Benjamin Herrenschmidt <benh@kernel.crashing.org>
Subject: [PATCH 05/24] powerpc/mm: Update bits used to skip hash_page
Date: Wed, 19 Jul 2017 14:49:27 +1000 [thread overview]
Message-ID: <20170719044946.22030-5-benh@kernel.crashing.org> (raw)
In-Reply-To: <20170719044946.22030-1-benh@kernel.crashing.org>
We test a number of bits from DSISR/SRR1 before deciding
to call hash_page(). If any of these is set, we go directly
to do_page_fault() as the bit indicate a fault that needs
to be handled there (no hashing needed).
This updates the current open-coded masks to use the new
DSISR definitions.
This *does* change the masks actually used in two ways:
- We used to test various bits that were defined as "always 0"
in the architecture and could be repurposed for something
else. From now on, we just ignore such bits.
- We were missing some new bits defined on P9
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/kernel/exceptions-64s.S | 6 ++++--
arch/powerpc/kernel/head_32.S | 2 +-
2 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index e6d8354d79ef..0e6aedd7066d 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1477,8 +1477,10 @@ USE_TEXT_SECTION()
*/
.balign IFETCH_ALIGN_BYTES
do_hash_page:
-#ifdef CONFIG_PPC_STD_MMU_64
- andis. r0,r4,0xa450 /* weird error? */
+ #ifdef CONFIG_PPC_STD_MMU_64
+ lis r0,DSISR_BAD_FAULT_64S@h
+ ori r0,r0,DSISR_BAD_FAULT_64S@l
+ and. r0,r4,r0 /* weird error? */
bne- handle_page_fault /* if not, try to insert a HPTE */
CURRENT_THREAD_INFO(r11, r1)
lwz r0,TI_PREEMPT(r11) /* If we're in an "NMI" */
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index f11d1cd6e314..86ad3eeadf67 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -388,7 +388,7 @@ DataAccess:
EXCEPTION_PROLOG
mfspr r10,SPRN_DSISR
stw r10,_DSISR(r11)
- andis. r0,r10,0xa470 /* weird error? */
+ andis. r0,r10,DSISR_BAD_FAULT_32S@h
bne 1f /* if not, try to put a PTE */
mfspr r4,SPRN_DAR /* into the hash table */
rlwinm r3,r10,32-15,21,21 /* DSISR_STORE -> _PAGE_RW */
--
2.13.3
next prev parent reply other threads:[~2017-07-19 4:50 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-19 4:49 [PATCH 01/24] powerpc/mm: Move exception_enter/exit to a do_page_fault wrapper Benjamin Herrenschmidt
2017-07-19 4:49 ` [PATCH 02/24] powerpc/mm: Pre-filter SRR1 bits before do_page_fault() Benjamin Herrenschmidt
2017-07-22 16:43 ` LEROY Christophe
2017-07-23 1:10 ` Benjamin Herrenschmidt
2017-07-24 13:48 ` Michael Ellerman
2017-07-19 4:49 ` [PATCH 03/24] powerpc/6xx: Handle DABR match before calling do_page_fault Benjamin Herrenschmidt
2017-08-03 0:19 ` Michael Ellerman
2017-08-03 1:00 ` Benjamin Herrenschmidt
2017-07-19 4:49 ` [PATCH 04/24] powerpc/mm: Update definitions of DSISR bits Benjamin Herrenschmidt
2017-07-19 4:49 ` Benjamin Herrenschmidt [this message]
2017-07-19 4:49 ` [PATCH 06/24] powerpc/mm: Use symbolic constants for filtering SRR1 bits on ISIs Benjamin Herrenschmidt
2017-07-19 4:49 ` [PATCH 07/24] powerpc/mm: Move out definition of CPU specific is_write bits Benjamin Herrenschmidt
2017-07-22 16:40 ` LEROY Christophe
2017-07-23 1:06 ` Benjamin Herrenschmidt
2017-07-24 11:58 ` Michael Ellerman
2017-07-19 4:49 ` [PATCH 08/24] powerpc/mm: Move error_code checks for bad faults earlier Benjamin Herrenschmidt
2017-07-19 4:49 ` [PATCH 09/24] powerpc/mm: Overhaul handling of bad page faults Benjamin Herrenschmidt
2017-07-19 4:49 ` [PATCH 10/24] powerpc/mm: Move debugger check to notify_page_fault() Benjamin Herrenschmidt
2017-07-19 4:49 ` [PATCH 11/24] powerpc/mm: Simplify returns from __do_page_fault Benjamin Herrenschmidt
2017-07-19 4:49 ` [PATCH 12/24] powerpc/mm: Fix reporting of kernel execute faults Benjamin Herrenschmidt
2018-11-07 8:35 ` Christophe LEROY
2018-11-07 10:39 ` Benjamin Herrenschmidt
[not found] ` <87zhtr5d1v.fsf@linux.ibm.com>
2018-11-30 6:08 ` Christophe LEROY
2017-07-19 4:49 ` [PATCH 13/24] powerpc/mm: Make bad_area* helper functions Benjamin Herrenschmidt
2017-07-19 4:49 ` [PATCH 14/24] powerpc/mm: Rework mm_fault_error() Benjamin Herrenschmidt
2017-07-19 4:49 ` [PATCH 15/24] powerpc/mm: Move CMO accounting out of do_page_fault into a helper Benjamin Herrenschmidt
2017-07-19 4:49 ` [PATCH 16/24] powerpc/mm: Cosmetic fix to page fault accounting Benjamin Herrenschmidt
2017-07-19 4:49 ` [PATCH 17/24] powerpc/mm: Move the DSISR_PROTFAULT sanity check Benjamin Herrenschmidt
2017-07-19 4:49 ` [PATCH 18/24] powerpc/mm: Move/simplify faulthandler_disabled() and !mm check Benjamin Herrenschmidt
2017-07-19 4:49 ` [PATCH 19/24] powerpc/mm: Add a bunch of (un)likely annotations to do_page_fault Benjamin Herrenschmidt
2017-07-19 4:49 ` [PATCH 20/24] powerpc/mm: Set fault flags earlier Benjamin Herrenschmidt
2017-07-19 4:49 ` [PATCH 21/24] powerpc/mm: Move page fault VMA access checks to a helper Benjamin Herrenschmidt
2017-07-19 4:49 ` [PATCH 22/24] powerpc/mm: Don't lose "major" fault indication on retry Benjamin Herrenschmidt
2017-07-19 4:49 ` [PATCH 23/24] powerpc/mm: Cleanup check for stack expansion Benjamin Herrenschmidt
2017-07-21 16:59 ` LEROY Christophe
2017-07-24 10:47 ` Michael Ellerman
2017-07-24 17:34 ` LEROY Christophe
2017-07-25 11:19 ` Michael Ellerman
2017-07-31 11:37 ` Christophe LEROY
2017-07-19 4:49 ` [PATCH 24/24] powerpc: Remove old unused icswx based coprocessor support Benjamin Herrenschmidt
2017-08-07 10:41 ` [01/24] powerpc/mm: Move exception_enter/exit to a do_page_fault wrapper Michael Ellerman
2017-08-07 16:37 ` Christophe LEROY
2017-08-08 2:16 ` Michael Ellerman
2017-08-08 6:45 ` Christophe LEROY
2017-08-08 10:00 ` Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170719044946.22030-5-benh@kernel.crashing.org \
--to=benh@kernel.crashing.org \
--cc=aneesh.kumar@linux.vnet.ibm.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).