From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: linuxppc-dev@lists.ozlabs.org
Subject: [PATCH 1/2] powerpc/xive: Move definition of ESB bits
Date: Fri, 12 Jan 2018 13:39:27 +1100 [thread overview]
Message-ID: <20180112023928.10926-1-benh@kernel.crashing.org> (raw)
>From xive.h to xive-regs.h since it's a HW register definition
and it can be used from assembly
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/include/asm/xive-regs.h | 35 +++++++++++++++++++++++++++++++++++
arch/powerpc/include/asm/xive.h | 35 -----------------------------------
2 files changed, 35 insertions(+), 35 deletions(-)
diff --git a/arch/powerpc/include/asm/xive-regs.h b/arch/powerpc/include/asm/xive-regs.h
index 1d3f2be5ae39..fa4288822b68 100644
--- a/arch/powerpc/include/asm/xive-regs.h
+++ b/arch/powerpc/include/asm/xive-regs.h
@@ -9,6 +9,41 @@
#ifndef _ASM_POWERPC_XIVE_REGS_H
#define _ASM_POWERPC_XIVE_REGS_H
+/*
+ * "magic" Event State Buffer (ESB) MMIO offsets.
+ *
+ * Each interrupt source has a 2-bit state machine called ESB
+ * which can be controlled by MMIO. It's made of 2 bits, P and
+ * Q. P indicates that an interrupt is pending (has been sent
+ * to a queue and is waiting for an EOI). Q indicates that the
+ * interrupt has been triggered while pending.
+ *
+ * This acts as a coalescing mechanism in order to guarantee
+ * that a given interrupt only occurs at most once in a queue.
+ *
+ * When doing an EOI, the Q bit will indicate if the interrupt
+ * needs to be re-triggered.
+ *
+ * The following offsets into the ESB MMIO allow to read or
+ * manipulate the PQ bits. They must be used with an 8-bytes
+ * load instruction. They all return the previous state of the
+ * interrupt (atomically).
+ *
+ * Additionally, some ESB pages support doing an EOI via a
+ * store at 0 and some ESBs support doing a trigger via a
+ * separate trigger page.
+ */
+#define XIVE_ESB_STORE_EOI 0x400 /* Store */
+#define XIVE_ESB_LOAD_EOI 0x000 /* Load */
+#define XIVE_ESB_GET 0x800 /* Load */
+#define XIVE_ESB_SET_PQ_00 0xc00 /* Load */
+#define XIVE_ESB_SET_PQ_01 0xd00 /* Load */
+#define XIVE_ESB_SET_PQ_10 0xe00 /* Load */
+#define XIVE_ESB_SET_PQ_11 0xf00 /* Load */
+
+#define XIVE_ESB_VAL_P 0x2
+#define XIVE_ESB_VAL_Q 0x1
+
/*
* Thread Management (aka "TM") registers
*/
diff --git a/arch/powerpc/include/asm/xive.h b/arch/powerpc/include/asm/xive.h
index 371fbebf1ec9..0e77005cf021 100644
--- a/arch/powerpc/include/asm/xive.h
+++ b/arch/powerpc/include/asm/xive.h
@@ -72,41 +72,6 @@ struct xive_q {
atomic_t pending_count;
};
-/*
- * "magic" Event State Buffer (ESB) MMIO offsets.
- *
- * Each interrupt source has a 2-bit state machine called ESB
- * which can be controlled by MMIO. It's made of 2 bits, P and
- * Q. P indicates that an interrupt is pending (has been sent
- * to a queue and is waiting for an EOI). Q indicates that the
- * interrupt has been triggered while pending.
- *
- * This acts as a coalescing mechanism in order to guarantee
- * that a given interrupt only occurs at most once in a queue.
- *
- * When doing an EOI, the Q bit will indicate if the interrupt
- * needs to be re-triggered.
- *
- * The following offsets into the ESB MMIO allow to read or
- * manipulate the PQ bits. They must be used with an 8-bytes
- * load instruction. They all return the previous state of the
- * interrupt (atomically).
- *
- * Additionally, some ESB pages support doing an EOI via a
- * store at 0 and some ESBs support doing a trigger via a
- * separate trigger page.
- */
-#define XIVE_ESB_STORE_EOI 0x400 /* Store */
-#define XIVE_ESB_LOAD_EOI 0x000 /* Load */
-#define XIVE_ESB_GET 0x800 /* Load */
-#define XIVE_ESB_SET_PQ_00 0xc00 /* Load */
-#define XIVE_ESB_SET_PQ_01 0xd00 /* Load */
-#define XIVE_ESB_SET_PQ_10 0xe00 /* Load */
-#define XIVE_ESB_SET_PQ_11 0xf00 /* Load */
-
-#define XIVE_ESB_VAL_P 0x2
-#define XIVE_ESB_VAL_Q 0x1
-
/* Global enable flags for the XIVE support */
extern bool __xive_enabled;
--
2.14.3
next reply other threads:[~2018-01-12 2:43 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-12 2:39 Benjamin Herrenschmidt [this message]
2018-01-12 2:39 ` [PATCH 2/2] powerpc/xive: Add interrupt flag to disable automatic EOI Benjamin Herrenschmidt
2018-01-15 10:10 ` [1/2] powerpc/xive: Move definition of ESB bits Michael Ellerman
2018-01-22 3:34 ` Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180112023928.10926-1-benh@kernel.crashing.org \
--to=benh@kernel.crashing.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).