From: Masami Hiramatsu <mhiramat@kernel.org>
To: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>,
Michael Ellerman <mpe@ellerman.id.au>,
Josef Bacik <jbacik@fb.com>,
linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] error-injection: Simplify arch specific helpers
Date: Wed, 30 May 2018 17:41:56 +0900 [thread overview]
Message-ID: <20180530174156.cb1799687fb834f26fe570a9@kernel.org> (raw)
In-Reply-To: <8f4883f08feaf6e040255015af2da7bbc7741e41.1527596631.git.naveen.n.rao@linux.vnet.ibm.com>
On Tue, 29 May 2018 18:06:02 +0530
"Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com> wrote:
> We already have an arch-independent way to set the instruction pointer
> with instruction_pointer_set(). Using this allows us to get rid of the
> need for override_function_with_return() that each architecture has to
> implement.
>
> Furthermore, just_return_func() only has to encode arch-specific
> assembly instructions to return from a function. Introduce a macro
> ARCH_FUNC_RET to provide the arch-specific instruction and move over
> just_return_func() to generic code.
>
> With these changes, architectures that already support kprobes, only
> just need to ensure they provide regs_set_return_value(), GET_IP() (for
> instruction_pointer_set()), and ARCH_FUNC_RET to support error
> injection.
Nice! the code basically good to me. Just one comment, ARCH_FUNC_RET sounds
like a function. Maybe ARCH_RETURN_INSTRUCTION will be better name, isn't it? :)
Thank you,
>
> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
> ---
> arch/x86/include/asm/error-injection.h | 6 +-----
> arch/x86/lib/Makefile | 1 -
> arch/x86/lib/error-inject.c | 20 --------------------
> include/asm-generic/error-injection.h | 6 ++++++
> include/linux/error-injection.h | 1 +
> kernel/fail_function.c | 2 +-
> kernel/trace/bpf_trace.c | 2 +-
> lib/error-inject.c | 8 ++++++++
> 8 files changed, 18 insertions(+), 28 deletions(-)
> delete mode 100644 arch/x86/lib/error-inject.c
>
> diff --git a/arch/x86/include/asm/error-injection.h b/arch/x86/include/asm/error-injection.h
> index 47b7a1296245..f3f22e237b86 100644
> --- a/arch/x86/include/asm/error-injection.h
> +++ b/arch/x86/include/asm/error-injection.h
> @@ -2,12 +2,8 @@
> #ifndef _ASM_ERROR_INJECTION_H
> #define _ASM_ERROR_INJECTION_H
>
> -#include <linux/compiler.h>
> -#include <linux/linkage.h>
> -#include <asm/ptrace.h>
> #include <asm-generic/error-injection.h>
>
> -asmlinkage void just_return_func(void);
> -void override_function_with_return(struct pt_regs *regs);
> +#define ARCH_FUNC_RET "ret"
>
> #endif /* _ASM_ERROR_INJECTION_H */
> diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
> index 25a972c61b0a..f23934bbaf4e 100644
> --- a/arch/x86/lib/Makefile
> +++ b/arch/x86/lib/Makefile
> @@ -26,7 +26,6 @@ lib-y += memcpy_$(BITS).o
> lib-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += rwsem.o
> lib-$(CONFIG_INSTRUCTION_DECODER) += insn.o inat.o insn-eval.o
> lib-$(CONFIG_RANDOMIZE_BASE) += kaslr.o
> -lib-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o
> lib-$(CONFIG_RETPOLINE) += retpoline.o
>
> obj-y += msr.o msr-reg.o msr-reg-export.o hweight.o
> diff --git a/arch/x86/lib/error-inject.c b/arch/x86/lib/error-inject.c
> deleted file mode 100644
> index 3cdf06128d13..000000000000
> --- a/arch/x86/lib/error-inject.c
> +++ /dev/null
> @@ -1,20 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -
> -#include <linux/error-injection.h>
> -#include <linux/kprobes.h>
> -
> -asmlinkage void just_return_func(void);
> -
> -asm(
> - ".type just_return_func, @function\n"
> - ".globl just_return_func\n"
> - "just_return_func:\n"
> - " ret\n"
> - ".size just_return_func, .-just_return_func\n"
> -);
> -
> -void override_function_with_return(struct pt_regs *regs)
> -{
> - regs->ip = (unsigned long)&just_return_func;
> -}
> -NOKPROBE_SYMBOL(override_function_with_return);
> diff --git a/include/asm-generic/error-injection.h b/include/asm-generic/error-injection.h
> index 296c65442f00..8ac152cc204a 100644
> --- a/include/asm-generic/error-injection.h
> +++ b/include/asm-generic/error-injection.h
> @@ -3,6 +3,9 @@
> #define _ASM_GENERIC_ERROR_INJECTION_H
>
> #if defined(__KERNEL__) && !defined(__ASSEMBLY__)
> +#include <linux/compiler.h>
> +#include <linux/linkage.h>
> +
> enum {
> EI_ETYPE_NONE, /* Dummy value for undefined case */
> EI_ETYPE_NULL, /* Return NULL if failure */
> @@ -27,6 +30,9 @@ static struct error_injection_entry __used \
> .addr = (unsigned long)fname, \
> .etype = EI_ETYPE_##_etype, \
> };
> +
> +asmlinkage void just_return_func(void);
> +
> #else
> #define ALLOW_ERROR_INJECTION(fname, _etype)
> #endif
> diff --git a/include/linux/error-injection.h b/include/linux/error-injection.h
> index 280c61ecbf20..f4a0b23423d2 100644
> --- a/include/linux/error-injection.h
> +++ b/include/linux/error-injection.h
> @@ -4,6 +4,7 @@
>
> #ifdef CONFIG_FUNCTION_ERROR_INJECTION
>
> +#include <linux/types.h>
> #include <asm/error-injection.h>
>
> extern bool within_error_injection_list(unsigned long addr);
> diff --git a/kernel/fail_function.c b/kernel/fail_function.c
> index 1d5632d8bbcc..0ae2ca4a29e8 100644
> --- a/kernel/fail_function.c
> +++ b/kernel/fail_function.c
> @@ -183,7 +183,7 @@ static int fei_kprobe_handler(struct kprobe *kp, struct pt_regs *regs)
>
> if (should_fail(&fei_fault_attr, 1)) {
> regs_set_return_value(regs, attr->retval);
> - override_function_with_return(regs);
> + instruction_pointer_set(regs, (unsigned long)&just_return_func);
> /* Kprobe specific fixup */
> reset_current_kprobe();
> preempt_enable_no_resched();
> diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c
> index 56ba0f2a01db..23f1f4ffda6c 100644
> --- a/kernel/trace/bpf_trace.c
> +++ b/kernel/trace/bpf_trace.c
> @@ -84,7 +84,7 @@ EXPORT_SYMBOL_GPL(trace_call_bpf);
> BPF_CALL_2(bpf_override_return, struct pt_regs *, regs, unsigned long, rc)
> {
> regs_set_return_value(regs, rc);
> - override_function_with_return(regs);
> + instruction_pointer_set(regs, (unsigned long)&just_return_func);
> return 0;
> }
>
> diff --git a/lib/error-inject.c b/lib/error-inject.c
> index c0d4600f4896..7fdc92b5babc 100644
> --- a/lib/error-inject.c
> +++ b/lib/error-inject.c
> @@ -20,6 +20,14 @@ struct ei_entry {
> void *priv;
> };
>
> +asm(
> + ".type just_return_func, @function\n"
> + ".globl just_return_func\n"
> + "just_return_func:\n"
> + ARCH_FUNC_RET "\n"
> + ".size just_return_func, .-just_return_func\n"
> +);
> +
> bool within_error_injection_list(unsigned long addr)
> {
> struct ei_entry *ent;
> --
> 2.17.0
>
--
Masami Hiramatsu <mhiramat@kernel.org>
next prev parent reply other threads:[~2018-05-30 8:42 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-29 12:36 [PATCH 0/2] error-injection: simplify code and powerpc support Naveen N. Rao
2018-05-29 12:36 ` [PATCH 1/2] error-injection: Simplify arch specific helpers Naveen N. Rao
2018-05-30 8:41 ` Masami Hiramatsu [this message]
2018-05-31 10:09 ` Naveen N. Rao
2018-06-01 23:12 ` Masami Hiramatsu
2018-05-29 12:36 ` [PATCH 2/2] powerpc: Add support for function error injection Naveen N. Rao
2018-05-31 4:57 ` Michael Ellerman
2018-05-31 10:11 ` Naveen N. Rao
2018-05-31 14:13 ` Michael Ellerman
2018-05-31 19:06 ` Naveen N. Rao
2018-06-06 10:38 ` Naveen N. Rao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180530174156.cb1799687fb834f26fe570a9@kernel.org \
--to=mhiramat@kernel.org \
--cc=jbacik@fb.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mingo@kernel.org \
--cc=mpe@ellerman.id.au \
--cc=naveen.n.rao@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).