linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Yangbo Lu <yangbo.lu@nxp.com>
To: netdev@vger.kernel.org, madalin.bucur@nxp.com,
	Richard Cochran <richardcochran@gmail.com>,
	Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
	"David S . Miller" <davem@davemloft.net>
Cc: devicetree@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Yangbo Lu <yangbo.lu@nxp.com>
Subject: [v4, 04/10] powerpc/mpc85xx: move ptp timer out of fman in dts
Date: Mon, 25 Jun 2018 20:37:10 +0800	[thread overview]
Message-ID: <20180625123716.28993-5-yangbo.lu@nxp.com> (raw)
In-Reply-To: <20180625123716.28993-1-yangbo.lu@nxp.com>

This patch is to move ptp timer node out of fman.
Because ptp timer will be probed by ptp_qoriq driver,
it should be an independent device in case of conflict
memory mapping.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
---
Changes for v2:
	- None.
Changes for v3:
	- None.
Changes for v4:
	- Added ACKs.
---
 arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi   |   14 ++++++++------
 arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi   |   14 ++++++++------
 arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi  |   14 ++++++++------
 arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi  |   14 ++++++++------
 arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi |   14 ++++++++------
 5 files changed, 40 insertions(+), 30 deletions(-)

diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi
index abd01d4..6b124f7 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi
@@ -37,12 +37,13 @@ fman0: fman@400000 {
 	#size-cells = <1>;
 	cell-index = <0>;
 	compatible = "fsl,fman";
-	ranges = <0 0x400000 0x100000>;
-	reg = <0x400000 0x100000>;
+	ranges = <0 0x400000 0xfe000>;
+	reg = <0x400000 0xfe000>;
 	interrupts = <96 2 0 0>, <16 2 1 1>;
 	clocks = <&clockgen 3 0>;
 	clock-names = "fmanclk";
 	fsl,qman-channel-range = <0x40 0xc>;
+	ptimer-handle = <&ptp_timer0>;
 
 	muram@0 {
 		compatible = "fsl,fman-muram";
@@ -93,9 +94,10 @@ fman0: fman@400000 {
 		reg = <0x87000 0x1000>;
 		status = "disabled";
 	};
+};
 
-	ptp_timer0: ptp-timer@fe000 {
-		compatible = "fsl,fman-ptp-timer";
-		reg = <0xfe000 0x1000>;
-	};
+ptp_timer0: ptp-timer@4fe000 {
+	compatible = "fsl,fman-ptp-timer";
+	reg = <0x4fe000 0x1000>;
+	interrupts = <96 2 0 0>;
 };
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi
index debea75..b80aaf5 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi
@@ -37,12 +37,13 @@ fman1: fman@500000 {
 	#size-cells = <1>;
 	cell-index = <1>;
 	compatible = "fsl,fman";
-	ranges = <0 0x500000 0x100000>;
-	reg = <0x500000 0x100000>;
+	ranges = <0 0x500000 0xfe000>;
+	reg = <0x500000 0xfe000>;
 	interrupts = <97 2 0 0>, <16 2 1 0>;
 	clocks = <&clockgen 3 1>;
 	clock-names = "fmanclk";
 	fsl,qman-channel-range = <0x60 0xc>;
+	ptimer-handle = <&ptp_timer1>;
 
 	muram@0 {
 		compatible = "fsl,fman-muram";
@@ -93,9 +94,10 @@ fman1: fman@500000 {
 		reg = <0x87000 0x1000>;
 		status = "disabled";
 	};
+};
 
-	ptp_timer1: ptp-timer@fe000 {
-		compatible = "fsl,fman-ptp-timer";
-		reg = <0xfe000 0x1000>;
-	};
+ptp_timer1: ptp-timer@5fe000 {
+	compatible = "fsl,fman-ptp-timer";
+	reg = <0x5fe000 0x1000>;
+	interrupts = <97 2 0 0>;
 };
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi
index 3a20e0d..d3720fd 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi
@@ -37,12 +37,13 @@ fman0: fman@400000 {
 	#size-cells = <1>;
 	cell-index = <0>;
 	compatible = "fsl,fman";
-	ranges = <0 0x400000 0x100000>;
-	reg = <0x400000 0x100000>;
+	ranges = <0 0x400000 0xfe000>;
+	reg = <0x400000 0xfe000>;
 	interrupts = <96 2 0 0>, <16 2 1 1>;
 	clocks = <&clockgen 3 0>;
 	clock-names = "fmanclk";
 	fsl,qman-channel-range = <0x800 0x10>;
+	ptimer-handle = <&ptp_timer0>;
 
 	muram@0 {
 		compatible = "fsl,fman-muram";
@@ -98,9 +99,10 @@ fman0: fman@400000 {
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xfd000 0x1000>;
 	};
+};
 
-	ptp_timer0: ptp-timer@fe000 {
-		compatible = "fsl,fman-ptp-timer";
-		reg = <0xfe000 0x1000>;
-	};
+ptp_timer0: ptp-timer@4fe000 {
+	compatible = "fsl,fman-ptp-timer";
+	reg = <0x4fe000 0x1000>;
+	interrupts = <96 2 0 0>;
 };
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi
index 82750ac..ae34c20 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi
@@ -37,12 +37,13 @@ fman1: fman@500000 {
 	#size-cells = <1>;
 	cell-index = <1>;
 	compatible = "fsl,fman";
-	ranges = <0 0x500000 0x100000>;
-	reg = <0x500000 0x100000>;
+	ranges = <0 0x500000 0xfe000>;
+	reg = <0x500000 0xfe000>;
 	interrupts = <97 2 0 0>, <16 2 1 0>;
 	clocks = <&clockgen 3 1>;
 	clock-names = "fmanclk";
 	fsl,qman-channel-range = <0x820 0x10>;
+	ptimer-handle = <&ptp_timer1>;
 
 	muram@0 {
 		compatible = "fsl,fman-muram";
@@ -98,9 +99,10 @@ fman1: fman@500000 {
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xfd000 0x1000>;
 	};
+};
 
-	ptp_timer1: ptp-timer@fe000 {
-		compatible = "fsl,fman-ptp-timer";
-		reg = <0xfe000 0x1000>;
-	};
+ptp_timer1: ptp-timer@5fe000 {
+	compatible = "fsl,fman-ptp-timer";
+	reg = <0x5fe000 0x1000>;
+	interrupts = <97 2 0 0>;
 };
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi
index 7f60b60..02f2755 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi
@@ -37,12 +37,13 @@ fman0: fman@400000 {
 	#size-cells = <1>;
 	cell-index = <0>;
 	compatible = "fsl,fman";
-	ranges = <0 0x400000 0x100000>;
-	reg = <0x400000 0x100000>;
+	ranges = <0 0x400000 0xfe000>;
+	reg = <0x400000 0xfe000>;
 	interrupts = <96 2 0 0>, <16 2 1 1>;
 	clocks = <&clockgen 3 0>;
 	clock-names = "fmanclk";
 	fsl,qman-channel-range = <0x800 0x10>;
+	ptimer-handle = <&ptp_timer0>;
 
 	muram@0 {
 		compatible = "fsl,fman-muram";
@@ -86,9 +87,10 @@ fman0: fman@400000 {
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xfd000 0x1000>;
 	};
+};
 
-	ptp_timer0: ptp-timer@fe000 {
-		compatible = "fsl,fman-ptp-timer";
-		reg = <0xfe000 0x1000>;
-	};
+ptp_timer0: ptp-timer@4fe000 {
+	compatible = "fsl,fman-ptp-timer";
+	reg = <0x4fe000 0x1000>;
+	interrupts = <96 2 0 0>;
 };
-- 
1.7.1

  parent reply	other threads:[~2018-06-25 12:39 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-25 12:37 [v4, 00/10] Support DPAA PTP clock and timestamping Yangbo Lu
2018-06-25 12:37 ` [v4, 01/10] fsl/fman: share the event interrupt Yangbo Lu
2018-06-25 12:37 ` [v4, 02/10] ptp: support DPAA FMan 1588 timer in ptp_qoriq Yangbo Lu
2018-06-25 12:37 ` [v4, 03/10] dt-binding: ptp_qoriq: add DPAA FMan support Yangbo Lu
2018-06-25 12:37 ` Yangbo Lu [this message]
2018-06-25 12:37 ` [v4, 05/10] arm64: dts: fsl: move ptp timer out of fman Yangbo Lu
2018-06-25 12:37 ` [v4, 06/10] fsl/fman: add set_tstamp interface Yangbo Lu
2018-06-25 12:37 ` [v4, 07/10] fsl/fman_port: support getting timestamp Yangbo Lu
2018-06-25 12:37 ` [v4, 08/10] fsl/fman: define frame description command UPD Yangbo Lu
2018-06-25 12:37 ` [v4, 09/10] dpaa_eth: add support for hardware timestamping Yangbo Lu
2018-06-25 12:37 ` [v4, 10/10] dpaa_eth: add the get_ts_info interface for ethtool Yangbo Lu
2018-06-26 13:18 ` [v4, 00/10] Support DPAA PTP clock and timestamping David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180625123716.28993-5-yangbo.lu@nxp.com \
    --to=yangbo.lu@nxp.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=madalin.bucur@nxp.com \
    --cc=netdev@vger.kernel.org \
    --cc=richardcochran@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).