[PATCH v16 00/21] powerpc: Switch to CONFIG_THREAD_INFO_IN_TASK

[PATCH v16 00/21] powerpc: Switch to CONFIG_THREAD_INFO_IN_TASK

[Michael Ellerman]

The purpose of this series is to activate CONFIG_THREAD_INFO_IN_TASK which
moves the thread_info into task_struct.

Moving thread_info into task_struct has the following advantages:
  - It protects thread_info from corruption in the case of stack
    overflows.
  - Its address is harder to determine if stack addresses are leaked,
    making a number of attacks more difficult.

Changes in v16 (mpe):
 - split the prepartion patches out into smaller pieces.
 - move all TASK_SIZE related contents out of processor.h
 - fix build failures with livepatching enabled (include sched/task_stack.h)
 - Use PACA_CURRENT_TI for the offset of the thread info in paca->current.

Changes in v15:
 - switched patch 1 and 2.
 - resync patch 1 with linux/next. As memblock modifications are now fully merged in
 linux-mm tree, this patch voids as soon as linux-mm gets merged into powerpc/merge branch
 - Fixed build failure on 64le due to call to __save_stack_trace_tsk_reliable() (patch 5)
 - Taken the renaming of THREAD_INFO to TASK_STACK out of the preparation patch to ease review (hence new patch 6)
 - Fixed one place where r11 (physical address of stack) was used instead of r1 to locate
 thread_info, inducing a bug when switching to r2 which is virtual address of current (patch 7)
 - Keeping physical address of current in r2 until MMU translation is reactivated (patch 11)

Changes in v14 (ie since v13):
 - Added in front a fixup patch which conflicts with this serie
 - Added a patch for using try_get_task_stack()/put_task_stack() in stack walkers.
 - Fixed compilation failure in the preparation patch (by moving the modification
 of klp_init_thread_info() to the following patch)

Changes since v12:
 - Patch 1: Taken comment from Mike (re-introduced the 'panic' in case memblock allocation fails in setup_64.c
 - Patch 1: Added alloc_stack() function in setup_32.c to also panic in case of allocation failure.

Changes since v11:
 - Rebased on 81775f5563fa ("Automatic merge of branches 'master', 'next' and 'fixes' into merge")
 - Added a first patch to change memblock allocs to functions returning virtual addrs. This removes
   the memset() which were the only remaining stuff in irq_ctx_init() and exc_lvl_ctx_init() at the end.
 - dropping irq_ctx_init() and exc_lvl_ctx_init() in patch 5 (powerpc: Activate CONFIG_THREAD_INFO_IN_TASK)
 - A few cosmetic changes in commit log and code.

Changes since v10:
 - Rebased on 21622a0d2023 ("Automatic merge of branches 'master', 'next' and 'fixes' into merge")
  ==> Fixed conflict in setup_32.S

Changes since v9:
 - Rebased on 183cbf93be88 ("Automatic merge of branches 'master', 'next' and 'fixes' into merge")
  ==> Fixed conflict on xmon

Changes since v8:
 - Rebased on e589b79e40d9 ("Automatic merge of branches 'master', 'next' and 'fixes' into merge")
  ==> Main impact was conflicts due to commit 9a8dd708d547 ("memblock: rename memblock_alloc{_nid,_try_nid} to memblock_phys_alloc*")

Changes since v7:
 - Rebased on fb6c6ce7907d ("Automatic merge of branches 'master', 'next' and 'fixes' into merge")

Changes since v6:
 - Fixed validate_sp() to exclude NULL sp in 'regain entire stack space' patch (early crash with CONFIG_KMEMLEAK)

Changes since v5:
 - Fixed livepatch_sp setup by using end_of_stack() instead of hardcoding
 - Fixed PPC_BPF_LOAD_CPU() macro

Changes since v4:
 - Fixed a build failure on 32bits SMP when include/generated/asm-offsets.h is not
 already existing, was due to spaces instead of a tab in the Makefile

Changes since RFC v3: (based on Nick's review)
 - Renamed task_size.h to task_size_user64.h to better relate to what it contains.
 - Handling of the isolation of thread_info cpu field inside CONFIG_SMP #ifdefs moved to a separate patch.
 - Removed CURRENT_THREAD_INFO macro completely.
 - Added a guard in asm/smp.h to avoid build failure before _TASK_CPU is defined.
 - Added a patch at the end to rename 'tp' pointers to 'sp' pointers
 - Renamed 'tp' into 'sp' pointers in preparation patch when relevant
 - Fixed a few commit logs
 - Fixed checkpatch report.

Changes since RFC v2:
 - Removed the modification of names in asm-offsets
 - Created a rule in arch/powerpc/Makefile to append the offset of current->cpu in CFLAGS
 - Modified asm/smp.h to use the offset set in CFLAGS
 - Squashed the renaming of THREAD_INFO to TASK_STACK in the preparation patch
 - Moved the modification of current_pt_regs in the patch activating CONFIG_THREAD_INFO_IN_TASK

Changes since RFC v1:
 - Removed the first patch which was modifying header inclusion order in timer
 - Modified some names in asm-offsets to avoid conflicts when including asm-offsets in C files
 - Modified asm/smp.h to avoid having to include linux/sched.h (using asm-offsets instead)
 - Moved some changes from the activation patch to the preparation patch.


Christophe Leroy (21):
  powerpc/irq: use memblock functions returning virtual address
  powerpc/32: Fix CONFIG_VIRT_CPU_ACCOUNTING_NATIVE for 40x/booke
  powerpc: Avoid circular header inclusion in mmu-hash.h
  powerpc: Only use task_struct 'cpu' field on SMP
  powerpc: prep stack walkers for THREAD_INFO_IN_TASK
  powerpc: Rename THREAD_INFO to TASK_STACK
  powerpc: call_do_[soft]irq() takes a pointer to the stack
  powerpc: Don't use CURRENT_THREAD_INFO to find the stack
  powerpc: Replace current_thread_info()->task with current
  powerpc: Update comments in preparation for THREAD_INFO_IN_TASK
  powerpc/64: Use task_stack_page() to initialise paca->kstack
  powerpc: Use sizeof(struct thread_info) in INIT_SP_LIMIT
  powerpc: Use linux/thread_info.h in processor.h
  powerpc: Use task_stack_page() in current_pt_regs()
  powerpc/idle/6xx: Use r1 with CURRENT_THREAD_INFO()
  powerpc: Activate CONFIG_THREAD_INFO_IN_TASK
  powerpc: regain entire stack space
  powerpc: 'current_set' is now a table of task_struct pointers
  powerpc/32: Remove CURRENT_THREAD_INFO and rename TI_CPU
  powerpc/64: Replace CURRENT_THREAD_INFO with PACA_CURRENT_TI
  powerpc: clean stack pointers naming

 arch/powerpc/Kconfig                          |   1 +
 arch/powerpc/Makefile                         |   7 ++
 arch/powerpc/include/asm/asm-prototypes.h     |   4 +-
 arch/powerpc/include/asm/book3s/64/mmu-hash.h |   2 +-
 arch/powerpc/include/asm/exception-64s.h      |   4 +-
 arch/powerpc/include/asm/irq.h                |  18 ++-
 arch/powerpc/include/asm/livepatch.h          |   7 +-
 arch/powerpc/include/asm/processor.h          | 105 ++--------------
 arch/powerpc/include/asm/ptrace.h             |   2 +-
 arch/powerpc/include/asm/reg.h                |   2 +-
 arch/powerpc/include/asm/smp.h                |  17 ++-
 arch/powerpc/include/asm/task_size_32.h       |  21 ++++
 arch/powerpc/include/asm/task_size_64.h       |  79 ++++++++++++
 arch/powerpc/include/asm/thread_info.h        |  19 ---
 arch/powerpc/kernel/asm-offsets.c             |  12 +-
 arch/powerpc/kernel/entry_32.S                |  80 +++++-------
 arch/powerpc/kernel/entry_64.S                |  12 +-
 arch/powerpc/kernel/epapr_hcalls.S            |   5 +-
 arch/powerpc/kernel/exceptions-64e.S          |  13 +-
 arch/powerpc/kernel/exceptions-64s.S          |   2 +-
 arch/powerpc/kernel/head_32.S                 |  14 +--
 arch/powerpc/kernel/head_40x.S                |   4 +-
 arch/powerpc/kernel/head_44x.S                |   8 +-
 arch/powerpc/kernel/head_64.S                 |   1 +
 arch/powerpc/kernel/head_8xx.S                |   2 +-
 arch/powerpc/kernel/head_booke.h              |  12 +-
 arch/powerpc/kernel/head_fsl_booke.S          |  16 +--
 arch/powerpc/kernel/idle_6xx.S                |   8 +-
 arch/powerpc/kernel/idle_book3e.S             |   2 +-
 arch/powerpc/kernel/idle_e500.S               |   8 +-
 arch/powerpc/kernel/idle_power4.S             |   2 +-
 arch/powerpc/kernel/irq.c                     | 114 +++---------------
 arch/powerpc/kernel/kgdb.c                    |  28 -----
 arch/powerpc/kernel/machine_kexec_64.c        |   6 +-
 arch/powerpc/kernel/misc_32.S                 |  17 +--
 arch/powerpc/kernel/process.c                 |  63 ++++++----
 arch/powerpc/kernel/setup-common.c            |   2 +-
 arch/powerpc/kernel/setup_32.c                |  26 ++--
 arch/powerpc/kernel/setup_64.c                |  51 ++------
 arch/powerpc/kernel/smp.c                     |  16 +--
 arch/powerpc/kernel/stacktrace.c              |  29 ++++-
 .../powerpc/kernel/trace/ftrace_64_mprofile.S |   6 +-
 arch/powerpc/kvm/book3s_hv_hmi.c              |   1 +
 arch/powerpc/mm/hash_low_32.S                 |  14 +--
 arch/powerpc/net/bpf_jit32.h                  |   5 +-
 arch/powerpc/sysdev/6xx-suspend.S             |   5 +-
 arch/powerpc/xmon/xmon.c                      |   2 +-
 47 files changed, 367 insertions(+), 507 deletions(-)
 create mode 100644 arch/powerpc/include/asm/task_size_32.h
 create mode 100644 arch/powerpc/include/asm/task_size_64.h

-- 
2.20.1

[PATCH v16 01/21] powerpc/irq: use memblock functions returning virtual address

[Michael Ellerman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

Since only the virtual address of allocated blocks is used,
lets use functions returning directly virtual address.

Those functions have the advantage of also zeroing the block.

Suggested-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/irq.c      |  5 -----
 arch/powerpc/kernel/setup_32.c | 26 ++++++++++++++++----------
 arch/powerpc/kernel/setup_64.c | 19 +++++++------------
 3 files changed, 23 insertions(+), 27 deletions(-)

diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index bb299613a462..4a5dd8800946 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -725,18 +725,15 @@ void exc_lvl_ctx_init(void)
 #endif
 #endif
 
-		memset((void *)critirq_ctx[cpu_nr], 0, THREAD_SIZE);
 		tp = critirq_ctx[cpu_nr];
 		tp->cpu = cpu_nr;
 		tp->preempt_count = 0;
 
 #ifdef CONFIG_BOOKE
-		memset((void *)dbgirq_ctx[cpu_nr], 0, THREAD_SIZE);
 		tp = dbgirq_ctx[cpu_nr];
 		tp->cpu = cpu_nr;
 		tp->preempt_count = 0;
 
-		memset((void *)mcheckirq_ctx[cpu_nr], 0, THREAD_SIZE);
 		tp = mcheckirq_ctx[cpu_nr];
 		tp->cpu = cpu_nr;
 		tp->preempt_count = HARDIRQ_OFFSET;
@@ -754,12 +751,10 @@ void irq_ctx_init(void)
 	int i;
 
 	for_each_possible_cpu(i) {
-		memset((void *)softirq_ctx[i], 0, THREAD_SIZE);
 		tp = softirq_ctx[i];
 		tp->cpu = i;
 		klp_init_thread_info(tp);
 
-		memset((void *)hardirq_ctx[i], 0, THREAD_SIZE);
 		tp = hardirq_ctx[i];
 		tp->cpu = i;
 		klp_init_thread_info(tp);
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 947f904688b0..1f0b7629c1a6 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -196,6 +196,17 @@ static int __init ppc_init(void)
 }
 arch_initcall(ppc_init);
 
+static void *__init alloc_stack(void)
+{
+	void *ptr = memblock_alloc(THREAD_SIZE, THREAD_SIZE);
+
+	if (!ptr)
+		panic("cannot allocate %d bytes for stack at %pS\n",
+		      THREAD_SIZE, (void *)_RET_IP_);
+
+	return ptr;
+}
+
 void __init irqstack_early_init(void)
 {
 	unsigned int i;
@@ -203,10 +214,8 @@ void __init irqstack_early_init(void)
 	/* interrupt stacks must be in lowmem, we get that for free on ppc32
 	 * as the memblock is limited to lowmem by default */
 	for_each_possible_cpu(i) {
-		softirq_ctx[i] = (struct thread_info *)
-			__va(memblock_phys_alloc(THREAD_SIZE, THREAD_SIZE));
-		hardirq_ctx[i] = (struct thread_info *)
-			__va(memblock_phys_alloc(THREAD_SIZE, THREAD_SIZE));
+		softirq_ctx[i] = alloc_stack();
+		hardirq_ctx[i] = alloc_stack();
 	}
 }
 
@@ -224,13 +233,10 @@ void __init exc_lvl_early_init(void)
 		hw_cpu = 0;
 #endif
 
-		critirq_ctx[hw_cpu] = (struct thread_info *)
-			__va(memblock_phys_alloc(THREAD_SIZE, THREAD_SIZE));
+		critirq_ctx[hw_cpu] = alloc_stack();
 #ifdef CONFIG_BOOKE
-		dbgirq_ctx[hw_cpu] = (struct thread_info *)
-			__va(memblock_phys_alloc(THREAD_SIZE, THREAD_SIZE));
-		mcheckirq_ctx[hw_cpu] = (struct thread_info *)
-			__va(memblock_phys_alloc(THREAD_SIZE, THREAD_SIZE));
+		dbgirq_ctx[hw_cpu] = alloc_stack();
+		mcheckirq_ctx[hw_cpu] = alloc_stack();
 #endif
 	}
 }
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 236c1151a3a7..080dd515d587 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -634,19 +634,17 @@ __init u64 ppc64_bolted_size(void)
 
 static void *__init alloc_stack(unsigned long limit, int cpu)
 {
-	unsigned long pa;
+	void *ptr;
 
 	BUILD_BUG_ON(STACK_INT_FRAME_SIZE % 16);
 
-	pa = memblock_alloc_base_nid(THREAD_SIZE, THREAD_SIZE, limit,
-					early_cpu_to_node(cpu), MEMBLOCK_NONE);
-	if (!pa) {
-		pa = memblock_alloc_base(THREAD_SIZE, THREAD_SIZE, limit);
-		if (!pa)
-			panic("cannot allocate stacks");
-	}
+	ptr = memblock_alloc_try_nid(THREAD_SIZE, THREAD_SIZE,
+				     MEMBLOCK_LOW_LIMIT, limit,
+				     early_cpu_to_node(cpu));
+	if (!ptr)
+		panic("cannot allocate stacks");
 
-	return __va(pa);
+	return ptr;
 }
 
 void __init irqstack_early_init(void)
@@ -739,20 +737,17 @@ void __init emergency_stack_init(void)
 		struct thread_info *ti;
 
 		ti = alloc_stack(limit, i);
-		memset(ti, 0, THREAD_SIZE);
 		emerg_stack_init_thread_info(ti, i);
 		paca_ptrs[i]->emergency_sp = (void *)ti + THREAD_SIZE;
 
 #ifdef CONFIG_PPC_BOOK3S_64
 		/* emergency stack for NMI exception handling. */
 		ti = alloc_stack(limit, i);
-		memset(ti, 0, THREAD_SIZE);
 		emerg_stack_init_thread_info(ti, i);
 		paca_ptrs[i]->nmi_emergency_sp = (void *)ti + THREAD_SIZE;
 
 		/* emergency stack for machine check exception handling. */
 		ti = alloc_stack(limit, i);
-		memset(ti, 0, THREAD_SIZE);
 		emerg_stack_init_thread_info(ti, i);
 		paca_ptrs[i]->mc_emergency_sp = (void *)ti + THREAD_SIZE;
 #endif
-- 
2.20.1

[PATCH v16 02/21] powerpc/32: Fix CONFIG_VIRT_CPU_ACCOUNTING_NATIVE for 40x/booke

[Michael Ellerman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

40x/booke have another path to reach 3f from transfer_to_handler,
make sure it also calls ACCOUNT_CPU_USER_ENTRY() when
CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is selected.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/entry_32.S | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 0768dfd8a64e..d4c6186aa7e8 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -166,6 +166,13 @@
 	   internal debug mode bit to do this. */
 	lwz	r12,THREAD_DBCR0(r12)
 	andis.	r12,r12,DBCR0_IDM@h
+#endif
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
+	CURRENT_THREAD_INFO(r9, r1)
+	tophys(r9, r9)
+	ACCOUNT_CPU_USER_ENTRY(r9, r11, r12)
+#endif
+#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
 	beq+	3f
 	/* From user and task is ptraced - load up global dbcr0 */
 	li	r12,-1			/* clear all pending debug events */
@@ -185,11 +192,6 @@
 	addi	r12,r12,-1
 	stw	r12,4(r11)
 #endif
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
-	CURRENT_THREAD_INFO(r9, r1)
-	tophys(r9, r9)
-	ACCOUNT_CPU_USER_ENTRY(r9, r11, r12)
-#endif
 
 	b	3f
 
-- 
2.20.1

[PATCH v16 03/21] powerpc: Avoid circular header inclusion in mmu-hash.h

[Michael Ellerman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

When activating CONFIG_THREAD_INFO_IN_TASK, linux/sched.h includes
asm/current.h. This generates a circular dependency. To avoid that,
asm/processor.h shall not be included in mmu-hash.h.

In order to do that, this patch moves into a new header called
asm/task_size_64/32.h all the TASK_SIZE related constants, which can
then be included in mmu-hash.h directly.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Split out all the TASK_SIZE constants not just 64-bit ones]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/asm/book3s/64/mmu-hash.h |   2 +-
 arch/powerpc/include/asm/processor.h          | 100 +-----------------
 arch/powerpc/include/asm/task_size_32.h       |  21 ++++
 arch/powerpc/include/asm/task_size_64.h       |  79 ++++++++++++++
 arch/powerpc/kvm/book3s_hv_hmi.c              |   1 +
 5 files changed, 107 insertions(+), 96 deletions(-)
 create mode 100644 arch/powerpc/include/asm/task_size_32.h
 create mode 100644 arch/powerpc/include/asm/task_size_64.h

diff --git a/arch/powerpc/include/asm/book3s/64/mmu-hash.h b/arch/powerpc/include/asm/book3s/64/mmu-hash.h
index 12e522807f9f..a28a28079edb 100644
--- a/arch/powerpc/include/asm/book3s/64/mmu-hash.h
+++ b/arch/powerpc/include/asm/book3s/64/mmu-hash.h
@@ -23,7 +23,7 @@
  */
 #include <asm/book3s/64/pgtable.h>
 #include <asm/bug.h>
-#include <asm/processor.h>
+#include <asm/task_size_64.h>
 #include <asm/cpu_has_feature.h>
 
 /*
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index ee58526cb6c2..d9b1503ba0f0 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -77,105 +77,15 @@ extern int _chrp_type;
 
 #ifdef __KERNEL__
 
-struct task_struct;
-void start_thread(struct pt_regs *regs, unsigned long fdptr, unsigned long sp);
-void release_thread(struct task_struct *);
-
-#ifdef CONFIG_PPC32
-
-#if CONFIG_TASK_SIZE > CONFIG_KERNEL_START
-#error User TASK_SIZE overlaps with KERNEL_START address
-#endif
-#define TASK_SIZE	(CONFIG_TASK_SIZE)
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE	(TASK_SIZE / 8 * 3)
-#endif
-
 #ifdef CONFIG_PPC64
-/*
- * 64-bit user address space can have multiple limits
- * For now supported values are:
- */
-#define TASK_SIZE_64TB  (0x0000400000000000UL)
-#define TASK_SIZE_128TB (0x0000800000000000UL)
-#define TASK_SIZE_512TB (0x0002000000000000UL)
-#define TASK_SIZE_1PB   (0x0004000000000000UL)
-#define TASK_SIZE_2PB   (0x0008000000000000UL)
-/*
- * With 52 bits in the address we can support
- * upto 4PB of range.
- */
-#define TASK_SIZE_4PB   (0x0010000000000000UL)
-
-/*
- * For now 512TB is only supported with book3s and 64K linux page size.
- */
-#if defined(CONFIG_PPC_BOOK3S_64) && defined(CONFIG_PPC_64K_PAGES)
-/*
- * Max value currently used:
- */
-#define TASK_SIZE_USER64		TASK_SIZE_4PB
-#define DEFAULT_MAP_WINDOW_USER64	TASK_SIZE_128TB
-#define TASK_CONTEXT_SIZE		TASK_SIZE_512TB
-#else
-#define TASK_SIZE_USER64		TASK_SIZE_64TB
-#define DEFAULT_MAP_WINDOW_USER64	TASK_SIZE_64TB
-/*
- * We don't need to allocate extended context ids for 4K page size, because
- * we limit the max effective address on this config to 64TB.
- */
-#define TASK_CONTEXT_SIZE		TASK_SIZE_64TB
-#endif
-
-/*
- * 32-bit user address space is 4GB - 1 page
- * (this 1 page is needed so referencing of 0xFFFFFFFF generates EFAULT
- */
-#define TASK_SIZE_USER32 (0x0000000100000000UL - (1*PAGE_SIZE))
-
-#define TASK_SIZE_OF(tsk) (test_tsk_thread_flag(tsk, TIF_32BIT) ? \
-		TASK_SIZE_USER32 : TASK_SIZE_USER64)
-#define TASK_SIZE	  TASK_SIZE_OF(current)
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE_USER32 (PAGE_ALIGN(TASK_SIZE_USER32 / 4))
-#define TASK_UNMAPPED_BASE_USER64 (PAGE_ALIGN(DEFAULT_MAP_WINDOW_USER64 / 4))
-
-#define TASK_UNMAPPED_BASE ((is_32bit_task()) ? \
-		TASK_UNMAPPED_BASE_USER32 : TASK_UNMAPPED_BASE_USER64 )
-#endif
-
-/*
- * Initial task size value for user applications. For book3s 64 we start
- * with 128TB and conditionally enable upto 512TB
- */
-#ifdef CONFIG_PPC_BOOK3S_64
-#define DEFAULT_MAP_WINDOW	((is_32bit_task()) ?			\
-				 TASK_SIZE_USER32 : DEFAULT_MAP_WINDOW_USER64)
+#include <asm/task_size_64.h>
 #else
-#define DEFAULT_MAP_WINDOW	TASK_SIZE
+#include <asm/task_size_32.h>
 #endif
 
-#ifdef __powerpc64__
-
-#define STACK_TOP_USER64 DEFAULT_MAP_WINDOW_USER64
-#define STACK_TOP_USER32 TASK_SIZE_USER32
-
-#define STACK_TOP (is_32bit_task() ? \
-		   STACK_TOP_USER32 : STACK_TOP_USER64)
-
-#define STACK_TOP_MAX TASK_SIZE_USER64
-
-#else /* __powerpc64__ */
-
-#define STACK_TOP TASK_SIZE
-#define STACK_TOP_MAX	STACK_TOP
-
-#endif /* __powerpc64__ */
+struct task_struct;
+void start_thread(struct pt_regs *regs, unsigned long fdptr, unsigned long sp);
+void release_thread(struct task_struct *);
 
 typedef struct {
 	unsigned long seg;
diff --git a/arch/powerpc/include/asm/task_size_32.h b/arch/powerpc/include/asm/task_size_32.h
new file mode 100644
index 000000000000..de7290ee770f
--- /dev/null
+++ b/arch/powerpc/include/asm/task_size_32.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_POWERPC_TASK_SIZE_32_H
+#define _ASM_POWERPC_TASK_SIZE_32_H
+
+#if CONFIG_TASK_SIZE > CONFIG_KERNEL_START
+#error User TASK_SIZE overlaps with KERNEL_START address
+#endif
+
+#define TASK_SIZE (CONFIG_TASK_SIZE)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm space during
+ * mmap's.
+ */
+#define TASK_UNMAPPED_BASE (TASK_SIZE / 8 * 3)
+
+#define DEFAULT_MAP_WINDOW TASK_SIZE
+#define STACK_TOP TASK_SIZE
+#define STACK_TOP_MAX STACK_TOP
+
+#endif /* _ASM_POWERPC_TASK_SIZE_32_H */
diff --git a/arch/powerpc/include/asm/task_size_64.h b/arch/powerpc/include/asm/task_size_64.h
new file mode 100644
index 000000000000..eab4779f6b84
--- /dev/null
+++ b/arch/powerpc/include/asm/task_size_64.h
@@ -0,0 +1,79 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_POWERPC_TASK_SIZE_64_H
+#define _ASM_POWERPC_TASK_SIZE_64_H
+
+/*
+ * 64-bit user address space can have multiple limits
+ * For now supported values are:
+ */
+#define TASK_SIZE_64TB  (0x0000400000000000UL)
+#define TASK_SIZE_128TB (0x0000800000000000UL)
+#define TASK_SIZE_512TB (0x0002000000000000UL)
+#define TASK_SIZE_1PB   (0x0004000000000000UL)
+#define TASK_SIZE_2PB   (0x0008000000000000UL)
+
+/*
+ * With 52 bits in the address we can support up to 4PB of range.
+ */
+#define TASK_SIZE_4PB   (0x0010000000000000UL)
+
+/*
+ * For now 512TB is only supported with book3s and 64K linux page size.
+ */
+#if defined(CONFIG_PPC_BOOK3S_64) && defined(CONFIG_PPC_64K_PAGES)
+/*
+ * Max value currently used:
+ */
+#define TASK_SIZE_USER64		TASK_SIZE_4PB
+#define DEFAULT_MAP_WINDOW_USER64	TASK_SIZE_128TB
+#define TASK_CONTEXT_SIZE		TASK_SIZE_512TB
+#else
+#define TASK_SIZE_USER64		TASK_SIZE_64TB
+#define DEFAULT_MAP_WINDOW_USER64	TASK_SIZE_64TB
+
+/*
+ * We don't need to allocate extended context ids for 4K page size, because we
+ * limit the max effective address on this config to 64TB.
+ */
+#define TASK_CONTEXT_SIZE TASK_SIZE_64TB
+#endif
+
+/*
+ * 32-bit user address space is 4GB - 1 page
+ * (this 1 page is needed so referencing of 0xFFFFFFFF generates EFAULT
+ */
+#define TASK_SIZE_USER32 (0x0000000100000000UL - (1 * PAGE_SIZE))
+
+#define TASK_SIZE_OF(tsk)						\
+	(test_tsk_thread_flag(tsk, TIF_32BIT) ? TASK_SIZE_USER32 :	\
+						TASK_SIZE_USER64)
+
+#define TASK_SIZE TASK_SIZE_OF(current)
+
+#define TASK_UNMAPPED_BASE_USER32 (PAGE_ALIGN(TASK_SIZE_USER32 / 4))
+#define TASK_UNMAPPED_BASE_USER64 (PAGE_ALIGN(DEFAULT_MAP_WINDOW_USER64 / 4))
+
+/*
+ * This decides where the kernel will search for a free chunk of vm space during
+ * mmap's.
+ */
+#define TASK_UNMAPPED_BASE	\
+	((is_32bit_task()) ? TASK_UNMAPPED_BASE_USER32 : TASK_UNMAPPED_BASE_USER64)
+
+/*
+ * Initial task size value for user applications. For book3s 64 we start
+ * with 128TB and conditionally enable upto 512TB
+ */
+#ifdef CONFIG_PPC_BOOK3S_64
+#define DEFAULT_MAP_WINDOW	\
+	((is_32bit_task()) ? TASK_SIZE_USER32 : DEFAULT_MAP_WINDOW_USER64)
+#else
+#define DEFAULT_MAP_WINDOW	TASK_SIZE
+#endif
+
+#define STACK_TOP_USER64 DEFAULT_MAP_WINDOW_USER64
+#define STACK_TOP_USER32 TASK_SIZE_USER32
+#define STACK_TOP_MAX TASK_SIZE_USER64
+#define STACK_TOP (is_32bit_task() ? STACK_TOP_USER32 : STACK_TOP_USER64)
+
+#endif /* _ASM_POWERPC_TASK_SIZE_64_H */
diff --git a/arch/powerpc/kvm/book3s_hv_hmi.c b/arch/powerpc/kvm/book3s_hv_hmi.c
index e3f738eb1cac..64b5011475c7 100644
--- a/arch/powerpc/kvm/book3s_hv_hmi.c
+++ b/arch/powerpc/kvm/book3s_hv_hmi.c
@@ -24,6 +24,7 @@
 #include <linux/compiler.h>
 #include <asm/paca.h>
 #include <asm/hmi.h>
+#include <asm/processor.h>
 
 void wait_for_subcore_guest_exit(void)
 {
-- 
2.20.1

[PATCH v16 04/21] powerpc: Only use task_struct 'cpu' field on SMP

[Michael Ellerman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

When moving to CONFIG_THREAD_INFO_IN_TASK, the thread_info 'cpu' field
gets moved into task_struct and only defined when CONFIG_SMP is set.

This patch ensures that TI_CPU is only used when CONFIG_SMP is set and
that task_struct 'cpu' field is not used directly out of SMP code.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/head_fsl_booke.S | 2 ++
 arch/powerpc/kernel/misc_32.S        | 4 ++++
 arch/powerpc/xmon/xmon.c             | 2 +-
 3 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 2386ce2a9c6e..2c21e8642a00 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -243,8 +243,10 @@ _ENTRY(__early_start)
 	li	r0,0
 	stwu	r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
 
+#ifdef CONFIG_SMP
 	CURRENT_THREAD_INFO(r22, r1)
 	stw	r24, TI_CPU(r22)
+#endif
 
 	bl	early_init
 
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 57d2ffb2d45c..02b8cdd73792 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -183,10 +183,14 @@ _GLOBAL(low_choose_750fx_pll)
 	or	r4,r4,r5
 	mtspr	SPRN_HID1,r4
 
+#ifdef CONFIG_SMP
 	/* Store new HID1 image */
 	CURRENT_THREAD_INFO(r6, r1)
 	lwz	r6,TI_CPU(r6)
 	slwi	r6,r6,2
+#else
+	li	r6, 0
+#endif
 	addis	r6,r6,nap_save_hid1@ha
 	stw	r4,nap_save_hid1@l(r6)
 
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 757b8499aba2..a0f44f992360 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -2997,7 +2997,7 @@ static void show_task(struct task_struct *tsk)
 	printf("%px %016lx %6d %6d %c %2d %s\n", tsk,
 		tsk->thread.ksp,
 		tsk->pid, rcu_dereference(tsk->parent)->pid,
-		state, task_thread_info(tsk)->cpu,
+		state, task_cpu(tsk),
 		tsk->comm);
 }
 
-- 
2.20.1

[PATCH v16 05/21] powerpc: prep stack walkers for THREAD_INFO_IN_TASK

[Michael Ellerman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[text copied from commit 9bbd4c56b0b6
("arm64: prep stack walkers for THREAD_INFO_IN_TASK")]

When CONFIG_THREAD_INFO_IN_TASK is selected, task stacks may be freed
before a task is destroyed. To account for this, the stacks are
refcounted, and when manipulating the stack of another task, it is
necessary to get/put the stack to ensure it isn't freed and/or re-used
while we do so.

This patch reworks the powerpc stack walking code to account for this.
When CONFIG_THREAD_INFO_IN_TASK is not selected these perform no
refcounting, and this should only be a structural change that does not
affect behaviour.

Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/process.c    | 23 +++++++++++++++++++++--
 arch/powerpc/kernel/stacktrace.c | 29 ++++++++++++++++++++++++++---
 2 files changed, 47 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index ce393df243aa..4ffbb677c9f5 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -2027,7 +2027,7 @@ int validate_sp(unsigned long sp, struct task_struct *p,
 
 EXPORT_SYMBOL(validate_sp);
 
-unsigned long get_wchan(struct task_struct *p)
+static unsigned long __get_wchan(struct task_struct *p)
 {
 	unsigned long ip, sp;
 	int count = 0;
@@ -2053,6 +2053,20 @@ unsigned long get_wchan(struct task_struct *p)
 	return 0;
 }
 
+unsigned long get_wchan(struct task_struct *p)
+{
+	unsigned long ret;
+
+	if (!try_get_task_stack(p))
+		return 0;
+
+	ret = __get_wchan(p);
+
+	put_task_stack(p);
+
+	return ret;
+}
+
 static int kstack_depth_to_print = CONFIG_PRINT_STACK_DEPTH;
 
 void show_stack(struct task_struct *tsk, unsigned long *stack)
@@ -2067,6 +2081,9 @@ void show_stack(struct task_struct *tsk, unsigned long *stack)
 	int curr_frame = 0;
 #endif
 
+	if (!try_get_task_stack(tsk))
+		return;
+
 	sp = (unsigned long) stack;
 	if (tsk == NULL)
 		tsk = current;
@@ -2081,7 +2098,7 @@ void show_stack(struct task_struct *tsk, unsigned long *stack)
 	printk("Call Trace:\n");
 	do {
 		if (!validate_sp(sp, tsk, STACK_FRAME_OVERHEAD))
-			return;
+			break;
 
 		stack = (unsigned long *) sp;
 		newsp = stack[0];
@@ -2121,6 +2138,8 @@ void show_stack(struct task_struct *tsk, unsigned long *stack)
 
 		sp = newsp;
 	} while (count++ < kstack_depth_to_print);
+
+	put_task_stack(tsk);
 }
 
 #ifdef CONFIG_PPC64
diff --git a/arch/powerpc/kernel/stacktrace.c b/arch/powerpc/kernel/stacktrace.c
index cf31ce6c1f53..f958f3bcba04 100644
--- a/arch/powerpc/kernel/stacktrace.c
+++ b/arch/powerpc/kernel/stacktrace.c
@@ -67,12 +67,17 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 {
 	unsigned long sp;
 
+	if (!try_get_task_stack(tsk))
+		return;
+
 	if (tsk == current)
 		sp = current_stack_pointer();
 	else
 		sp = tsk->thread.ksp;
 
 	save_context_stack(trace, sp, tsk, 0);
+
+	put_task_stack(tsk);
 }
 EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
 
@@ -90,9 +95,8 @@ EXPORT_SYMBOL_GPL(save_stack_trace_regs);
  *
  * If the task is not 'current', the caller *must* ensure the task is inactive.
  */
-int
-save_stack_trace_tsk_reliable(struct task_struct *tsk,
-				struct stack_trace *trace)
+static int __save_stack_trace_tsk_reliable(struct task_struct *tsk,
+					   struct stack_trace *trace)
 {
 	unsigned long sp;
 	unsigned long newsp;
@@ -197,6 +201,25 @@ save_stack_trace_tsk_reliable(struct task_struct *tsk,
 	}
 	return 0;
 }
+
+int save_stack_trace_tsk_reliable(struct task_struct *tsk,
+				  struct stack_trace *trace)
+{
+	int ret;
+
+	/*
+	 * If the task doesn't have a stack (e.g., a zombie), the stack is
+	 * "reliably" empty.
+	 */
+	if (!try_get_task_stack(tsk))
+		return 0;
+
+	ret = __save_stack_trace_tsk_reliable(tsk, trace);
+
+	put_task_stack(tsk);
+
+	return ret;
+}
 EXPORT_SYMBOL_GPL(save_stack_trace_tsk_reliable);
 #endif /* CONFIG_HAVE_RELIABLE_STACKTRACE */
 
-- 
2.20.1

[PATCH v16 06/21] powerpc: Rename THREAD_INFO to TASK_STACK

[Michael Ellerman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

This patch renames THREAD_INFO to TASK_STACK, because it is in fact
the offset of the pointer to the stack in task_struct so this pointer
will not be impacted by the move of THREAD_INFO.

Also make it available on 64-bit, as we'll need it there when we
activate THREAD_INFO_IN_TASK.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Make available on 64-bit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/asm-offsets.c    | 2 +-
 arch/powerpc/kernel/entry_32.S       | 2 +-
 arch/powerpc/kernel/head_32.S        | 2 +-
 arch/powerpc/kernel/head_40x.S       | 4 ++--
 arch/powerpc/kernel/head_8xx.S       | 2 +-
 arch/powerpc/kernel/head_booke.h     | 4 ++--
 arch/powerpc/kernel/head_fsl_booke.S | 2 +-
 7 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 9ffc72ded73a..b2b52e002a76 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -90,10 +90,10 @@ int main(void)
 	DEFINE(SIGSEGV, SIGSEGV);
 	DEFINE(NMI_MASK, NMI_MASK);
 #else
-	OFFSET(THREAD_INFO, task_struct, stack);
 	DEFINE(THREAD_INFO_GAP, _ALIGN_UP(sizeof(struct thread_info), 16));
 	OFFSET(KSP_LIMIT, thread_struct, ksp_limit);
 #endif /* CONFIG_PPC64 */
+	OFFSET(TASK_STACK, task_struct, stack);
 
 #ifdef CONFIG_LIVEPATCH
 	OFFSET(TI_livepatch_sp, thread_info, livepatch_sp);
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index d4c6186aa7e8..f1646d845404 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -1168,7 +1168,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
 	mfspr	r9,SPRN_SPRG_THREAD
 	lwz	r10,SAVED_KSP_LIMIT(r1)
 	stw	r10,KSP_LIMIT(r9)
-	lwz	r9,THREAD_INFO-THREAD(r9)
+	lwz	r9,TASK_STACK-THREAD(r9)
 	CURRENT_THREAD_INFO(r10, r1)
 	lwz	r10,TI_PREEMPT(r10)
 	stw	r10,TI_PREEMPT(r9)
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 05b08db3901d..9268e5e87949 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -261,7 +261,7 @@ _ENTRY(_start);
 	tophys(r11,r1);			/* use tophys(r1) if kernel */ \
 	beq	1f;		\
 	mfspr	r11,SPRN_SPRG_THREAD;	\
-	lwz	r11,THREAD_INFO-THREAD(r11);	\
+	lwz	r11,TASK_STACK-THREAD(r11);	\
 	addi	r11,r11,THREAD_SIZE;	\
 	tophys(r11,r11);	\
 1:	subi	r11,r11,INT_FRAME_SIZE	/* alloc exc. frame */
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index b19d78410511..3088c9f29f5e 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -115,7 +115,7 @@ _ENTRY(saved_ksp_limit)
 	andi.	r11,r11,MSR_PR;						     \
 	beq	1f;							     \
 	mfspr	r1,SPRN_SPRG_THREAD;	/* if from user, start at top of   */\
-	lwz	r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack   */\
+	lwz	r1,TASK_STACK-THREAD(r1); /* this thread's kernel stack   */\
 	addi	r1,r1,THREAD_SIZE;					     \
 1:	subi	r1,r1,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
 	tophys(r11,r1);							     \
@@ -158,7 +158,7 @@ _ENTRY(saved_ksp_limit)
 	beq	1f;							     \
 	/* COMING FROM USER MODE */					     \
 	mfspr	r11,SPRN_SPRG_THREAD;	/* if from user, start at top of   */\
-	lwz	r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
+	lwz	r11,TASK_STACK-THREAD(r11); /* this thread's kernel stack */\
 1:	addi	r11,r11,THREAD_SIZE-INT_FRAME_SIZE; /* Alloc an excpt frm  */\
 	tophys(r11,r11);						     \
 	stw	r10,_CCR(r11);          /* save various registers	   */\
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 57deb1e9ffea..5f5f89e87e3a 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -142,7 +142,7 @@ _ENTRY(_start);
 	tophys(r11,r1);			/* use tophys(r1) if kernel */ \
 	beq	1f;		\
 	mfspr	r11,SPRN_SPRG_THREAD;	\
-	lwz	r11,THREAD_INFO-THREAD(r11);	\
+	lwz	r11,TASK_STACK-THREAD(r11);	\
 	addi	r11,r11,THREAD_SIZE;	\
 	tophys(r11,r11);	\
 1:	subi	r11,r11,INT_FRAME_SIZE	/* alloc exc. frame */
diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
index 306e26c073a0..69e80e6d0d16 100644
--- a/arch/powerpc/kernel/head_booke.h
+++ b/arch/powerpc/kernel/head_booke.h
@@ -55,7 +55,7 @@ END_BTB_FLUSH_SECTION
 	beq	1f;							     \
 	BOOKE_CLEAR_BTB(r11)						\
 	/* if from user, start at top of this thread's kernel stack */       \
-	lwz	r11, THREAD_INFO-THREAD(r10);				     \
+	lwz	r11, TASK_STACK - THREAD(r10);				     \
 	ALLOC_STACK_FRAME(r11, THREAD_SIZE);				     \
 1 :	subi	r11, r11, INT_FRAME_SIZE; /* Allocate exception frame */     \
 	stw	r13, _CCR(r11);		/* save various registers */	     \
@@ -142,7 +142,7 @@ END_BTB_FLUSH_SECTION
 	BOOKE_CLEAR_BTB(r10)						\
 	andi.	r11,r11,MSR_PR;						     \
 	mfspr	r11,SPRN_SPRG_THREAD;	/* if from user, start at top of   */\
-	lwz	r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
+	lwz	r11, TASK_STACK - THREAD(r11); /* this thread's kernel stack */\
 	addi	r11,r11,EXC_LVL_FRAME_OVERHEAD;	/* allocate stack frame    */\
 	beq	1f;							     \
 	/* COMING FROM USER MODE */					     \
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 2c21e8642a00..42d8d6fc00cb 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -719,7 +719,7 @@ END_BTB_FLUSH_SECTION
 
 	/* Get the next_tlbcam_idx percpu var */
 #ifdef CONFIG_SMP
-	lwz	r12, THREAD_INFO-THREAD(r12)
+	lwz	r12, TASK_STACK-THREAD(r12)
 	lwz	r15, TI_CPU(r12)
 	lis     r14, __per_cpu_offset@h
 	ori     r14, r14, __per_cpu_offset@l
-- 
2.20.1

[PATCH v16 07/21] powerpc: call_do_[soft]irq() takes a pointer to the stack

[Michael Ellerman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

The purpose of the pointer given to call_do_softirq() and
call_do_irq() is to point the new stack. Currently that's the same
thing as the thread_info, but won't be with THREAD_INFO_IN_TASK.

So change the parameter to void* and rename it 'sp'.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Split out of larger patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/asm/irq.h | 4 ++--
 arch/powerpc/kernel/misc_32.S  | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
index ee39ce56b2a2..2efbae8d93be 100644
--- a/arch/powerpc/include/asm/irq.h
+++ b/arch/powerpc/include/asm/irq.h
@@ -63,8 +63,8 @@ extern struct thread_info *hardirq_ctx[NR_CPUS];
 extern struct thread_info *softirq_ctx[NR_CPUS];
 
 extern void irq_ctx_init(void);
-extern void call_do_softirq(struct thread_info *tp);
-extern void call_do_irq(struct pt_regs *regs, struct thread_info *tp);
+void call_do_softirq(void *sp);
+void call_do_irq(struct pt_regs *regs, void *sp);
 extern void do_IRQ(struct pt_regs *regs);
 extern void __init init_IRQ(void);
 extern void __do_irq(struct pt_regs *regs);
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 02b8cdd73792..242f0c88010e 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -60,7 +60,7 @@ _GLOBAL(call_do_softirq)
 	blr
 
 /*
- * void call_do_irq(struct pt_regs *regs, struct thread_info *irqtp);
+ * void call_do_irq(struct pt_regs *regs, void *sp);
  */
 _GLOBAL(call_do_irq)
 	mflr	r0
-- 
2.20.1

[PATCH v16 08/21] powerpc: Don't use CURRENT_THREAD_INFO to find the stack

[Michael Ellerman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

A few places use CURRENT_THREAD_INFO, or the C version, to find the
stack. This will no longer work with THREAD_INFO_IN_TASK so change
them to find the stack in other ways.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Split out of larger patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/entry_64.S | 2 +-
 arch/powerpc/kernel/irq.c      | 2 +-
 arch/powerpc/kernel/misc_32.S  | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index c17c1bed6148..21f1cb4d464e 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -689,7 +689,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
 2:
 #endif /* CONFIG_PPC_BOOK3S_64 */
 
-	CURRENT_THREAD_INFO(r7, r8)  /* base of new stack */
+	clrrdi	r7, r8, THREAD_SHIFT	/* base of new stack */
 	/* Note: this uses SWITCH_FRAME_SIZE rather than INT_FRAME_SIZE
 	   because we don't need to leave the 288-byte ABI gap at the
 	   top of the kernel stack. */
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 4a5dd8800946..531e9ef153c0 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -663,7 +663,7 @@ void do_IRQ(struct pt_regs *regs)
 	struct thread_info *curtp, *irqtp, *sirqtp;
 
 	/* Switch to the irq stack to handle this */
-	curtp = current_thread_info();
+	curtp = (void *)(current_stack_pointer() & ~(THREAD_SIZE - 1));
 	irqtp = hardirq_ctx[raw_smp_processor_id()];
 	sirqtp = softirq_ctx[raw_smp_processor_id()];
 
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 242f0c88010e..b37b50fde828 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -603,7 +603,7 @@ EXPORT_SYMBOL(__bswapdi2)
 #ifdef CONFIG_SMP
 _GLOBAL(start_secondary_resume)
 	/* Reset stack */
-	CURRENT_THREAD_INFO(r1, r1)
+	rlwinm	r1, r1, 0, 0, 31 - THREAD_SHIFT
 	addi	r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
 	li	r3,0
 	stw	r3,0(r1)		/* Zero the stack frame pointer	*/
-- 
2.20.1

[PATCH v16 09/21] powerpc: Replace current_thread_info()->task with current

[Michael Ellerman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

We have a few places that use current_thread_info()->task to access
current. This won't work with THREAD_INFO_IN_TASK so fix them now.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Split out of larger patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/process.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 4ffbb677c9f5..21c1e11a06de 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -1231,8 +1231,8 @@ struct task_struct *__switch_to(struct task_struct *prev,
 		batch->active = 1;
 	}
 
-	if (current_thread_info()->task->thread.regs) {
-		restore_math(current_thread_info()->task->thread.regs);
+	if (current->thread.regs) {
+		restore_math(current->thread.regs);
 
 		/*
 		 * The copy-paste buffer can only store into foreign real
@@ -1242,7 +1242,7 @@ struct task_struct *__switch_to(struct task_struct *prev,
 		 * mappings, we must issue a cp_abort to clear any state and
 		 * prevent snooping, corruption or a covert channel.
 		 */
-		if (current_thread_info()->task->thread.used_vas)
+		if (current->thread.used_vas)
 			asm volatile(PPC_CP_ABORT);
 	}
 #endif /* CONFIG_PPC_BOOK3S_64 */
-- 
2.20.1

[PATCH v16 10/21] powerpc: Update comments in preparation for THREAD_INFO_IN_TASK

[Michael Ellerman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

Update a few comments that talk about current_thread_info() in
preparation for THREAD_INFO_IN_TASK.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Split out of larger patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/asm/reg.h       | 2 +-
 arch/powerpc/kernel/head_32.S        | 2 +-
 arch/powerpc/kernel/head_44x.S       | 2 +-
 arch/powerpc/kernel/head_fsl_booke.S | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 1c98ef1f2d5b..581e61db2dcf 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -1062,7 +1062,7 @@
  *	- SPRG9 debug exception scratch
  *
  * All 32-bit:
- *	- SPRG3 current thread_info pointer
+ *	- SPRG3 current thread_struct physical addr pointer
  *        (virtual on BookE, physical on others)
  *
  * 32-bit classic:
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 9268e5e87949..8282d25948ae 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -845,7 +845,7 @@ _ENTRY(copy_and_flush)
 	bl	init_idle_6xx
 #endif /* CONFIG_PPC_BOOK3S_32 */
 
-	/* get current_thread_info and current */
+	/* get current's stack and current */
 	lis	r1,secondary_ti@ha
 	tophys(r1,r1)
 	lwz	r1,secondary_ti@l(r1)
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index bf23c19c92d6..4e8c8bf50413 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -1019,7 +1019,7 @@ _GLOBAL(start_secondary_47x)
 
 	/* Now we can get our task struct and real stack pointer */
 
-	/* Get current_thread_info and current */
+	/* Get current's stack and current */
 	lis	r1,secondary_ti@ha
 	lwz	r1,secondary_ti@l(r1)
 	lwz	r2,TI_TASK(r1)
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 42d8d6fc00cb..6301bb24889a 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -1091,7 +1091,7 @@ _GLOBAL(set_context)
 	mr	r4,r24		/* Why? */
 	bl	call_setup_cpu
 
-	/* get current_thread_info and current */
+	/* get current's stack and current */
 	lis	r1,secondary_ti@ha
 	lwz	r1,secondary_ti@l(r1)
 	lwz	r2,TI_TASK(r1)
-- 
2.20.1

[PATCH v16 11/21] powerpc/64: Use task_stack_page() to initialise paca->kstack

[Michael Ellerman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

Rather than using the thread info use task_stack_page() to initialise
paca->kstack, that way it will work with THREAD_INFO_IN_TASK.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Split out of larger patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/smp.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 3f15edf25a0d..1d3e7cb6704d 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -20,6 +20,7 @@
 #include <linux/kernel.h>
 #include <linux/export.h>
 #include <linux/sched/mm.h>
+#include <linux/sched/task_stack.h>
 #include <linux/sched/topology.h>
 #include <linux/smp.h>
 #include <linux/interrupt.h>
@@ -1017,7 +1018,8 @@ static void cpu_idle_thread_init(unsigned int cpu, struct task_struct *idle)
 
 #ifdef CONFIG_PPC64
 	paca_ptrs[cpu]->__current = idle;
-	paca_ptrs[cpu]->kstack = (unsigned long)ti + THREAD_SIZE - STACK_FRAME_OVERHEAD;
+	paca_ptrs[cpu]->kstack = (unsigned long)task_stack_page(idle) +
+				 THREAD_SIZE - STACK_FRAME_OVERHEAD;
 #endif
 	ti->cpu = cpu;
 	secondary_ti = current_set[cpu] = ti;
-- 
2.20.1

[PATCH v16 12/21] powerpc: Use sizeof(struct thread_info) in INIT_SP_LIMIT

[Michael Ellerman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

Currently INIT_SP_LIMIT uses sizeof(init_thread_info), but that symbol
won't exist when we enable THREAD_INFO_IN_TASK. So just use the sizeof
the type which is the same value but will continue to work.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Split out of larger patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/asm/processor.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index d9b1503ba0f0..b40b614047e4 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -268,7 +268,7 @@ struct thread_struct {
 
 #define INIT_SP		(sizeof(init_stack) + (unsigned long) &init_stack)
 #define INIT_SP_LIMIT \
-	(_ALIGN_UP(sizeof(init_thread_info), 16) + (unsigned long) &init_stack)
+	(_ALIGN_UP(sizeof(struct thread_info), 16) + (unsigned long)&init_stack)
 
 #ifdef CONFIG_SPE
 #define SPEFSCR_INIT \
-- 
2.20.1

[PATCH v16 13/21] powerpc: Use linux/thread_info.h in processor.h

[Michael Ellerman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

When we enable THREAD_INFO_IN_TASK we will remove our definition of
current_thread_info(). Instead it will come from linux/thread_info.h

So switch processor.h to include the latter, so that it can continue
to find current_thread_info().

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Split out of larger patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/asm/processor.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index b40b614047e4..9226fb83a82e 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -40,7 +40,7 @@
 
 #ifndef __ASSEMBLY__
 #include <linux/types.h>
-#include <asm/thread_info.h>
+#include <linux/thread_info.h>
 #include <asm/ptrace.h>
 #include <asm/hw_breakpoint.h>
 
-- 
2.20.1

[PATCH v16 14/21] powerpc: Use task_stack_page() in current_pt_regs()

[Michael Ellerman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

Change current_pt_regs() to use task_stack_page() rather than
current_thread_info() so that it keeps working once we enable
THREAD_INFO_IN_TASK.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Split out of large patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/asm/ptrace.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h
index 0b8a735b6d85..64271e562fed 100644
--- a/arch/powerpc/include/asm/ptrace.h
+++ b/arch/powerpc/include/asm/ptrace.h
@@ -157,7 +157,7 @@ extern int ptrace_put_reg(struct task_struct *task, int regno,
 			  unsigned long data);
 
 #define current_pt_regs() \
-	((struct pt_regs *)((unsigned long)current_thread_info() + THREAD_SIZE) - 1)
+	((struct pt_regs *)((unsigned long)task_stack_page(current) + THREAD_SIZE) - 1)
 /*
  * We use the least-significant bit of the trap field to indicate
  * whether we have saved the full set of registers, or only a
-- 
2.20.1

[PATCH v16 15/21] powerpc/idle/6xx: Use r1 with CURRENT_THREAD_INFO()

[Michael Ellerman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

Make sure CURRENT_THREAD_INFO() is used with r1 which is the virtual
address of the stack, in order to ease the switch to r2 when we enable
THREAD_INFO_IN_TASK, as we have no register having the phys address of
current.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Split out of larger patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/idle_6xx.S | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/idle_6xx.S b/arch/powerpc/kernel/idle_6xx.S
index ff026c9d3cab..d9b6e7e0b5e3 100644
--- a/arch/powerpc/kernel/idle_6xx.S
+++ b/arch/powerpc/kernel/idle_6xx.S
@@ -159,7 +159,8 @@ _GLOBAL(power_save_ppc32_restore)
 	stw	r9,_NIP(r11)		/* make it do a blr */
 
 #ifdef CONFIG_SMP
-	CURRENT_THREAD_INFO(r12, r11)
+	CURRENT_THREAD_INFO(r12, r1)
+	tophys(r12, r12)
 	lwz	r11,TI_CPU(r12)		/* get cpu number * 4 */
 	slwi	r11,r11,2
 #else
-- 
2.20.1

[PATCH v16 16/21] powerpc: Activate CONFIG_THREAD_INFO_IN_TASK

[Michael Ellerman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

This patch activates CONFIG_THREAD_INFO_IN_TASK which
moves the thread_info into task_struct.

Moving thread_info into task_struct has the following advantages:
  - It protects thread_info from corruption in the case of stack
    overflows.
  - Its address is harder to determine if stack addresses are leaked,
    making a number of attacks more difficult.

This has the following consequences:
  - thread_info is now located at the beginning of task_struct.
  - The 'cpu' field is now in task_struct, and only exists when
    CONFIG_SMP is active.
  - thread_info doesn't have anymore the 'task' field.

This patch:
  - Removes all recopy of thread_info struct when the stack changes.
  - Changes the CURRENT_THREAD_INFO() macro to point to current.
  - Selects CONFIG_THREAD_INFO_IN_TASK.
  - Modifies raw_smp_processor_id() to get ->cpu from current without
    including linux/sched.h to avoid circular inclusion and without
    including asm/asm-offsets.h to avoid symbol names duplication
    between ASM constants and C constants.
  - Modifies klp_init_thread_info() to take a task_struct pointer
    argument.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Add task_stack.h to livepatch.h to fix build fails]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/Kconfig                   |  1 +
 arch/powerpc/Makefile                  |  7 +++
 arch/powerpc/include/asm/irq.h         |  4 --
 arch/powerpc/include/asm/livepatch.h   |  7 ++-
 arch/powerpc/include/asm/smp.h         | 17 +++++-
 arch/powerpc/include/asm/thread_info.h | 17 +-----
 arch/powerpc/kernel/asm-offsets.c      |  7 ++-
 arch/powerpc/kernel/entry_32.S         |  9 ++-
 arch/powerpc/kernel/exceptions-64e.S   | 11 ----
 arch/powerpc/kernel/head_32.S          |  6 +-
 arch/powerpc/kernel/head_44x.S         |  4 +-
 arch/powerpc/kernel/head_64.S          |  1 +
 arch/powerpc/kernel/head_booke.h       |  8 +--
 arch/powerpc/kernel/head_fsl_booke.S   |  7 +--
 arch/powerpc/kernel/irq.c              | 79 +-------------------------
 arch/powerpc/kernel/kgdb.c             | 28 ---------
 arch/powerpc/kernel/machine_kexec_64.c |  6 +-
 arch/powerpc/kernel/process.c          |  2 +-
 arch/powerpc/kernel/setup-common.c     |  2 +-
 arch/powerpc/kernel/setup_64.c         | 21 -------
 arch/powerpc/kernel/smp.c              |  2 +-
 arch/powerpc/net/bpf_jit32.h           |  5 +-
 22 files changed, 57 insertions(+), 194 deletions(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 08908219fba9..3f237ffa0649 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -241,6 +241,7 @@ config PPC
 	select RTC_LIB
 	select SPARSE_IRQ
 	select SYSCTL_EXCEPTION_TRACE
+	select THREAD_INFO_IN_TASK
 	select VIRT_TO_BUS			if !PPC64
 	#
 	# Please keep this list sorted alphabetically.
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index ac033341ed55..53ffe935f3b0 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -427,6 +427,13 @@ else
 endif
 endif
 
+ifdef CONFIG_SMP
+prepare: task_cpu_prepare
+
+task_cpu_prepare: prepare0
+	$(eval KBUILD_CFLAGS += -D_TASK_CPU=$(shell awk '{if ($$2 == "TI_CPU") print $$3;}' include/generated/asm-offsets.h))
+endif
+
 # Check toolchain versions:
 # - gcc-4.6 is the minimum kernel-wide version so nothing required.
 checkbin:
diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
index 2efbae8d93be..28a7ace0a1b9 100644
--- a/arch/powerpc/include/asm/irq.h
+++ b/arch/powerpc/include/asm/irq.h
@@ -51,9 +51,6 @@ struct pt_regs;
 extern struct thread_info *critirq_ctx[NR_CPUS];
 extern struct thread_info *dbgirq_ctx[NR_CPUS];
 extern struct thread_info *mcheckirq_ctx[NR_CPUS];
-extern void exc_lvl_ctx_init(void);
-#else
-#define exc_lvl_ctx_init()
 #endif
 
 /*
@@ -62,7 +59,6 @@ extern void exc_lvl_ctx_init(void);
 extern struct thread_info *hardirq_ctx[NR_CPUS];
 extern struct thread_info *softirq_ctx[NR_CPUS];
 
-extern void irq_ctx_init(void);
 void call_do_softirq(void *sp);
 void call_do_irq(struct pt_regs *regs, void *sp);
 extern void do_IRQ(struct pt_regs *regs);
diff --git a/arch/powerpc/include/asm/livepatch.h b/arch/powerpc/include/asm/livepatch.h
index 47a03b9b528b..5070df19d463 100644
--- a/arch/powerpc/include/asm/livepatch.h
+++ b/arch/powerpc/include/asm/livepatch.h
@@ -21,6 +21,7 @@
 
 #include <linux/module.h>
 #include <linux/ftrace.h>
+#include <linux/sched/task_stack.h>
 
 #ifdef CONFIG_LIVEPATCH
 static inline int klp_check_compiler_support(void)
@@ -43,13 +44,13 @@ static inline unsigned long klp_get_ftrace_location(unsigned long faddr)
 	return ftrace_location_range(faddr, faddr + 16);
 }
 
-static inline void klp_init_thread_info(struct thread_info *ti)
+static inline void klp_init_thread_info(struct task_struct *p)
 {
 	/* + 1 to account for STACK_END_MAGIC */
-	ti->livepatch_sp = (unsigned long *)(ti + 1) + 1;
+	task_thread_info(p)->livepatch_sp = end_of_stack(p) + 1;
 }
 #else
-static void klp_init_thread_info(struct thread_info *ti) { }
+static inline void klp_init_thread_info(struct task_struct *p) { }
 #endif /* CONFIG_LIVEPATCH */
 
 #endif /* _ASM_POWERPC_LIVEPATCH_H */
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index 41695745032c..0de717e16dd6 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -83,7 +83,22 @@ int is_cpu_dead(unsigned int cpu);
 /* 32-bit */
 extern int smp_hw_index[];
 
-#define raw_smp_processor_id()	(current_thread_info()->cpu)
+/*
+ * This is particularly ugly: it appears we can't actually get the definition
+ * of task_struct here, but we need access to the CPU this task is running on.
+ * Instead of using task_struct we're using _TASK_CPU which is extracted from
+ * asm-offsets.h by kbuild to get the current processor ID.
+ *
+ * This also needs to be safeguarded when building asm-offsets.s because at
+ * that time _TASK_CPU is not defined yet. It could have been guarded by
+ * _TASK_CPU itself, but we want the build to fail if _TASK_CPU is missing
+ * when building something else than asm-offsets.s
+ */
+#ifdef GENERATING_ASM_OFFSETS
+#define raw_smp_processor_id()		(0)
+#else
+#define raw_smp_processor_id()		(*(unsigned int *)((void *)current + _TASK_CPU))
+#endif
 #define hard_smp_processor_id() 	(smp_hw_index[smp_processor_id()])
 
 static inline int get_hard_smp_processor_id(int cpu)
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
index 544cac0474cb..d91523c2c7d8 100644
--- a/arch/powerpc/include/asm/thread_info.h
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -18,9 +18,9 @@
 #define THREAD_SIZE		(1 << THREAD_SHIFT)
 
 #ifdef CONFIG_PPC64
-#define CURRENT_THREAD_INFO(dest, sp)	stringify_in_c(clrrdi dest, sp, THREAD_SHIFT)
+#define CURRENT_THREAD_INFO(dest, sp)	stringify_in_c(ld dest, PACACURRENT(r13))
 #else
-#define CURRENT_THREAD_INFO(dest, sp)	stringify_in_c(rlwinm dest, sp, 0, 0, 31-THREAD_SHIFT)
+#define CURRENT_THREAD_INFO(dest, sp)	stringify_in_c(mr dest, r2)
 #endif
 
 #ifndef __ASSEMBLY__
@@ -34,8 +34,6 @@
  * low level task data.
  */
 struct thread_info {
-	struct task_struct *task;		/* main task structure */
-	int		cpu;			/* cpu we're on */
 	int		preempt_count;		/* 0 => preemptable,
 						   <0 => BUG */
 	unsigned long	local_flags;		/* private flags for thread */
@@ -58,8 +56,6 @@ struct thread_info {
  */
 #define INIT_THREAD_INFO(tsk)			\
 {						\
-	.task =		&tsk,			\
-	.cpu =		0,			\
 	.preempt_count = INIT_PREEMPT_COUNT,	\
 	.flags =	0,			\
 }
@@ -67,15 +63,6 @@ struct thread_info {
 #define THREAD_SIZE_ORDER	(THREAD_SHIFT - PAGE_SHIFT)
 
 /* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
-	unsigned long val;
-
-	asm (CURRENT_THREAD_INFO(%0,1) : "=r" (val));
-
-	return (struct thread_info *)val;
-}
-
 extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
 
 #ifdef CONFIG_PPC_BOOK3S_64
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index b2b52e002a76..1fb52206c106 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -13,6 +13,8 @@
  * 2 of the License, or (at your option) any later version.
  */
 
+#define GENERATING_ASM_OFFSETS	/* asm/smp.h */
+
 #include <linux/compat.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
@@ -94,6 +96,9 @@ int main(void)
 	OFFSET(KSP_LIMIT, thread_struct, ksp_limit);
 #endif /* CONFIG_PPC64 */
 	OFFSET(TASK_STACK, task_struct, stack);
+#ifdef CONFIG_SMP
+	OFFSET(TI_CPU, task_struct, cpu);
+#endif
 
 #ifdef CONFIG_LIVEPATCH
 	OFFSET(TI_livepatch_sp, thread_info, livepatch_sp);
@@ -161,8 +166,6 @@ int main(void)
 	OFFSET(TI_FLAGS, thread_info, flags);
 	OFFSET(TI_LOCAL_FLAGS, thread_info, local_flags);
 	OFFSET(TI_PREEMPT, thread_info, preempt_count);
-	OFFSET(TI_TASK, thread_info, task);
-	OFFSET(TI_CPU, thread_info, cpu);
 
 #ifdef CONFIG_PPC64
 	OFFSET(DCACHEL1BLOCKSIZE, ppc64_caches, l1d.block_size);
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index f1646d845404..3255c0840beb 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -1168,10 +1168,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
 	mfspr	r9,SPRN_SPRG_THREAD
 	lwz	r10,SAVED_KSP_LIMIT(r1)
 	stw	r10,KSP_LIMIT(r9)
-	lwz	r9,TASK_STACK-THREAD(r9)
-	CURRENT_THREAD_INFO(r10, r1)
-	lwz	r10,TI_PREEMPT(r10)
-	stw	r10,TI_PREEMPT(r9)
 	RESTORE_xSRR(SRR0,SRR1);
 	RESTORE_xSRR(CSRR0,CSRR1);
 	RESTORE_MMU_REGS;
@@ -1294,10 +1290,13 @@ BEGIN_FTR_SECTION
 END_FTR_SECTION_IFSET(CPU_FTR_601)
 	lwz	r3,_TRAP(r1)
 	andi.	r0,r3,1
-	beq	4f
+	beq	5f
 	SAVE_NVGPRS(r1)
 	rlwinm	r3,r3,0,0,30
 	stw	r3,_TRAP(r1)
+5:	mfspr	r2,SPRN_SPRG_THREAD
+	addi	r2,r2,-THREAD
+	tovirt(r2,r2)			/* set back r2 to current */
 4:	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	unrecoverable_exception
 	/* shouldn't return */
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index afb638778f44..20f14996281d 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -77,17 +77,6 @@
 	andi.	r3,r3,MSR_PR
 	bnelr
 
-	/* Copy info into temporary exception thread info */
-	ld	r11,PACAKSAVE(r13)
-	CURRENT_THREAD_INFO(r11, r11)
-	CURRENT_THREAD_INFO(r12, r1)
-	ld	r10,TI_FLAGS(r11)
-	std	r10,TI_FLAGS(r12)
-	ld	r10,TI_PREEMPT(r11)
-	std	r10,TI_PREEMPT(r12)
-	ld	r10,TI_TASK(r11)
-	std	r10,TI_TASK(r12)
-
 	/*
 	 * Advance to the next TLB exception frame for handler
 	 * types that don't do it automatically.
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 8282d25948ae..309a45779ad5 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -848,9 +848,9 @@ _ENTRY(copy_and_flush)
 	/* get current's stack and current */
 	lis	r1,secondary_ti@ha
 	tophys(r1,r1)
-	lwz	r1,secondary_ti@l(r1)
-	tophys(r2,r1)
-	lwz	r2,TI_TASK(r2)
+	lwz	r2,secondary_ti@l(r1)
+	tophys(r1,r2)
+	lwz	r1,TASK_STACK(r1)
 
 	/* stack */
 	addi	r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index 4e8c8bf50413..f94a93b6c2f2 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -1021,8 +1021,8 @@ _GLOBAL(start_secondary_47x)
 
 	/* Get current's stack and current */
 	lis	r1,secondary_ti@ha
-	lwz	r1,secondary_ti@l(r1)
-	lwz	r2,TI_TASK(r1)
+	lwz	r2,secondary_ti@l(r1)
+	lwz	r1,TASK_STACK(r2)
 
 	/* Current stack pointer */
 	addi	r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 4898e9491a1c..c6a9bf7b34bf 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -805,6 +805,7 @@ _GLOBAL(pmac_secondary_start)
 	LOAD_REG_ADDR(r3, current_set)
 	sldi	r28,r24,3		/* get current_set[cpu#]	 */
 	ldx	r14,r3,r28
+	ld	r14,TASK_STACK(r14)
 	addi	r14,r14,THREAD_SIZE-STACK_FRAME_OVERHEAD
 	std	r14,PACAKSAVE(r13)
 
diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
index 69e80e6d0d16..1b22a8dea399 100644
--- a/arch/powerpc/kernel/head_booke.h
+++ b/arch/powerpc/kernel/head_booke.h
@@ -155,13 +155,7 @@ END_BTB_FLUSH_SECTION
 	stw	r10,GPR11(r11);						     \
 	b	2f;							     \
 	/* COMING FROM PRIV MODE */					     \
-1:	lwz	r9,TI_FLAGS-EXC_LVL_FRAME_OVERHEAD(r11);		     \
-	lwz	r10,TI_PREEMPT-EXC_LVL_FRAME_OVERHEAD(r11);		     \
-	stw	r9,TI_FLAGS-EXC_LVL_FRAME_OVERHEAD(r8);			     \
-	stw	r10,TI_PREEMPT-EXC_LVL_FRAME_OVERHEAD(r8);		     \
-	lwz	r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r11);			     \
-	stw	r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r8);			     \
-	mr	r11,r8;							     \
+1:	mr	r11, r8;							     \
 2:	mfspr	r8,SPRN_SPRG_RSCRATCH_##exc_level;			     \
 	stw	r12,GPR12(r11);		/* save various registers	   */\
 	mflr	r10;							     \
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 6301bb24889a..11f38adbe020 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -719,8 +719,7 @@ END_BTB_FLUSH_SECTION
 
 	/* Get the next_tlbcam_idx percpu var */
 #ifdef CONFIG_SMP
-	lwz	r12, TASK_STACK-THREAD(r12)
-	lwz	r15, TI_CPU(r12)
+	lwz	r15, TI_CPU-THREAD(r12)
 	lis     r14, __per_cpu_offset@h
 	ori     r14, r14, __per_cpu_offset@l
 	rlwinm  r15, r15, 2, 0, 29
@@ -1093,8 +1092,8 @@ _GLOBAL(set_context)
 
 	/* get current's stack and current */
 	lis	r1,secondary_ti@ha
-	lwz	r1,secondary_ti@l(r1)
-	lwz	r2,TI_TASK(r1)
+	lwz	r2,secondary_ti@l(r1)
+	lwz	r1,TASK_STACK(r2)
 
 	/* stack */
 	addi	r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 531e9ef153c0..85c48911938a 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -673,24 +673,9 @@ void do_IRQ(struct pt_regs *regs)
 		set_irq_regs(old_regs);
 		return;
 	}
-
-	/* Prepare the thread_info in the irq stack */
-	irqtp->task = curtp->task;
-	irqtp->flags = 0;
-
-	/* Copy the preempt_count so that the [soft]irq checks work. */
-	irqtp->preempt_count = curtp->preempt_count;
-
 	/* Switch stack and call */
 	call_do_irq(regs, irqtp);
 
-	/* Restore stack limit */
-	irqtp->task = NULL;
-
-	/* Copy back updates to the thread_info */
-	if (irqtp->flags)
-		set_bits(irqtp->flags, &curtp->flags);
-
 	set_irq_regs(old_regs);
 }
 
@@ -698,85 +683,23 @@ void __init init_IRQ(void)
 {
 	if (ppc_md.init_IRQ)
 		ppc_md.init_IRQ();
-
-	exc_lvl_ctx_init();
-
-	irq_ctx_init();
 }
 
 #if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
 struct thread_info   *critirq_ctx[NR_CPUS] __read_mostly;
 struct thread_info    *dbgirq_ctx[NR_CPUS] __read_mostly;
 struct thread_info *mcheckirq_ctx[NR_CPUS] __read_mostly;
-
-void exc_lvl_ctx_init(void)
-{
-	struct thread_info *tp;
-	int i, cpu_nr;
-
-	for_each_possible_cpu(i) {
-#ifdef CONFIG_PPC64
-		cpu_nr = i;
-#else
-#ifdef CONFIG_SMP
-		cpu_nr = get_hard_smp_processor_id(i);
-#else
-		cpu_nr = 0;
-#endif
-#endif
-
-		tp = critirq_ctx[cpu_nr];
-		tp->cpu = cpu_nr;
-		tp->preempt_count = 0;
-
-#ifdef CONFIG_BOOKE
-		tp = dbgirq_ctx[cpu_nr];
-		tp->cpu = cpu_nr;
-		tp->preempt_count = 0;
-
-		tp = mcheckirq_ctx[cpu_nr];
-		tp->cpu = cpu_nr;
-		tp->preempt_count = HARDIRQ_OFFSET;
-#endif
-	}
-}
 #endif
 
 struct thread_info *softirq_ctx[NR_CPUS] __read_mostly;
 struct thread_info *hardirq_ctx[NR_CPUS] __read_mostly;
 
-void irq_ctx_init(void)
-{
-	struct thread_info *tp;
-	int i;
-
-	for_each_possible_cpu(i) {
-		tp = softirq_ctx[i];
-		tp->cpu = i;
-		klp_init_thread_info(tp);
-
-		tp = hardirq_ctx[i];
-		tp->cpu = i;
-		klp_init_thread_info(tp);
-	}
-}
-
 void do_softirq_own_stack(void)
 {
-	struct thread_info *curtp, *irqtp;
+	struct thread_info *irqtp;
 
-	curtp = current_thread_info();
 	irqtp = softirq_ctx[smp_processor_id()];
-	irqtp->task = curtp->task;
-	irqtp->flags = 0;
 	call_do_softirq(irqtp);
-	irqtp->task = NULL;
-
-	/* Set any flag that may have been set on the
-	 * alternate stack
-	 */
-	if (irqtp->flags)
-		set_bits(irqtp->flags, &curtp->flags);
 }
 
 irq_hw_number_t virq_to_hw(unsigned int virq)
diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
index e1865565f0ae..7dd55eb1259d 100644
--- a/arch/powerpc/kernel/kgdb.c
+++ b/arch/powerpc/kernel/kgdb.c
@@ -151,41 +151,13 @@ static int kgdb_handle_breakpoint(struct pt_regs *regs)
 	return 1;
 }
 
-static DEFINE_PER_CPU(struct thread_info, kgdb_thread_info);
 static int kgdb_singlestep(struct pt_regs *regs)
 {
-	struct thread_info *thread_info, *exception_thread_info;
-	struct thread_info *backup_current_thread_info =
-		this_cpu_ptr(&kgdb_thread_info);
-
 	if (user_mode(regs))
 		return 0;
 
-	/*
-	 * On Book E and perhaps other processors, singlestep is handled on
-	 * the critical exception stack.  This causes current_thread_info()
-	 * to fail, since it it locates the thread_info by masking off
-	 * the low bits of the current stack pointer.  We work around
-	 * this issue by copying the thread_info from the kernel stack
-	 * before calling kgdb_handle_exception, and copying it back
-	 * afterwards.  On most processors the copy is avoided since
-	 * exception_thread_info == thread_info.
-	 */
-	thread_info = (struct thread_info *)(regs->gpr[1] & ~(THREAD_SIZE-1));
-	exception_thread_info = current_thread_info();
-
-	if (thread_info != exception_thread_info) {
-		/* Save the original current_thread_info. */
-		memcpy(backup_current_thread_info, exception_thread_info, sizeof *thread_info);
-		memcpy(exception_thread_info, thread_info, sizeof *thread_info);
-	}
-
 	kgdb_handle_exception(0, SIGTRAP, 0, regs);
 
-	if (thread_info != exception_thread_info)
-		/* Restore current_thread_info lastly. */
-		memcpy(exception_thread_info, backup_current_thread_info, sizeof *thread_info);
-
 	return 1;
 }
 
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index a0f6f45005bd..75692c327ba0 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -317,10 +317,8 @@ void default_machine_kexec(struct kimage *image)
 	 * We setup preempt_count to avoid using VMX in memcpy.
 	 * XXX: the task struct will likely be invalid once we do the copy!
 	 */
-	kexec_stack.thread_info.task = current_thread_info()->task;
-	kexec_stack.thread_info.flags = 0;
-	kexec_stack.thread_info.preempt_count = HARDIRQ_OFFSET;
-	kexec_stack.thread_info.cpu = current_thread_info()->cpu;
+	current_thread_info()->flags = 0;
+	current_thread_info()->preempt_count = HARDIRQ_OFFSET;
 
 	/* We need a static PACA, too; copy this CPU's PACA over and switch to
 	 * it. Also poison per_cpu_offset and NULL lppaca to catch anyone using
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 21c1e11a06de..d3c8af4c3a61 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -1634,7 +1634,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	unsigned long sp = (unsigned long)task_stack_page(p) + THREAD_SIZE;
 	struct thread_info *ti = task_thread_info(p);
 
-	klp_init_thread_info(ti);
+	klp_init_thread_info(p);
 
 	/* Copy registers */
 	sp -= sizeof(struct pt_regs);
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index ca00fbb97cf8..3d0dab1647fe 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -938,7 +938,7 @@ void __init setup_arch(char **cmdline_p)
 	/* Reserve large chunks of memory for use by CMA for KVM. */
 	kvm_cma_reserve();
 
-	klp_init_thread_info(&init_thread_info);
+	klp_init_thread_info(&init_task);
 
 	init_mm.start_code = (unsigned long)_stext;
 	init_mm.end_code = (unsigned long) _etext;
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 080dd515d587..0912948a8ea6 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -689,24 +689,6 @@ void __init exc_lvl_early_init(void)
 }
 #endif
 
-/*
- * Emergency stacks are used for a range of things, from asynchronous
- * NMIs (system reset, machine check) to synchronous, process context.
- * We set preempt_count to zero, even though that isn't necessarily correct. To
- * get the right value we'd need to copy it from the previous thread_info, but
- * doing that might fault causing more problems.
- * TODO: what to do with accounting?
- */
-static void emerg_stack_init_thread_info(struct thread_info *ti, int cpu)
-{
-	ti->task = NULL;
-	ti->cpu = cpu;
-	ti->preempt_count = 0;
-	ti->local_flags = 0;
-	ti->flags = 0;
-	klp_init_thread_info(ti);
-}
-
 /*
  * Stack space used when we detect a bad kernel stack pointer, and
  * early in SMP boots before relocation is enabled. Exclusive emergency
@@ -737,18 +719,15 @@ void __init emergency_stack_init(void)
 		struct thread_info *ti;
 
 		ti = alloc_stack(limit, i);
-		emerg_stack_init_thread_info(ti, i);
 		paca_ptrs[i]->emergency_sp = (void *)ti + THREAD_SIZE;
 
 #ifdef CONFIG_PPC_BOOK3S_64
 		/* emergency stack for NMI exception handling. */
 		ti = alloc_stack(limit, i);
-		emerg_stack_init_thread_info(ti, i);
 		paca_ptrs[i]->nmi_emergency_sp = (void *)ti + THREAD_SIZE;
 
 		/* emergency stack for machine check exception handling. */
 		ti = alloc_stack(limit, i);
-		emerg_stack_init_thread_info(ti, i);
 		paca_ptrs[i]->mc_emergency_sp = (void *)ti + THREAD_SIZE;
 #endif
 	}
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 1d3e7cb6704d..aa4517686f90 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -1021,7 +1021,7 @@ static void cpu_idle_thread_init(unsigned int cpu, struct task_struct *idle)
 	paca_ptrs[cpu]->kstack = (unsigned long)task_stack_page(idle) +
 				 THREAD_SIZE - STACK_FRAME_OVERHEAD;
 #endif
-	ti->cpu = cpu;
+	idle->cpu = cpu;
 	secondary_ti = current_set[cpu] = ti;
 }
 
diff --git a/arch/powerpc/net/bpf_jit32.h b/arch/powerpc/net/bpf_jit32.h
index 6f4daacad296..dc50a8d4b3b9 100644
--- a/arch/powerpc/net/bpf_jit32.h
+++ b/arch/powerpc/net/bpf_jit32.h
@@ -106,9 +106,8 @@ DECLARE_LOAD_FUNC(sk_load_byte_msh);
 	} while (0)
 #else
 #define PPC_BPF_LOAD_CPU(r)     \
-	do { BUILD_BUG_ON(FIELD_SIZEOF(struct thread_info, cpu) != 4);		\
-		PPC_LHZ_OFFS(r, (1 & ~(THREAD_SIZE - 1)),			\
-				offsetof(struct thread_info, cpu));		\
+	do { BUILD_BUG_ON(FIELD_SIZEOF(struct task_struct, cpu) != 4);		\
+		PPC_LHZ_OFFS(r, 2, offsetof(struct task_struct, cpu));		\
 	} while(0)
 #endif
 #else
-- 
2.20.1

[PATCH v16 17/21] powerpc: regain entire stack space

[Michael Ellerman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

thread_info is not anymore in the stack, so the entire stack
can now be used.

There is also no risk anymore of corrupting task_cpu(p) with a
stack overflow so the patch removes the test.

When doing this, an explicit test for NULL stack pointer is
needed in validate_sp() as it is not anymore implicitely covered
by the sizeof(thread_info) gap.

In the meantime, with the previous patch all pointers to the stacks
are not anymore pointers to thread_info so this patch changes them
to void*

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/asm/irq.h       | 10 ++++-----
 arch/powerpc/include/asm/processor.h |  3 +--
 arch/powerpc/kernel/asm-offsets.c    |  1 -
 arch/powerpc/kernel/entry_32.S       | 14 ++++--------
 arch/powerpc/kernel/irq.c            | 19 ++++++++---------
 arch/powerpc/kernel/misc_32.S        |  6 ++----
 arch/powerpc/kernel/process.c        | 32 +++++++++++-----------------
 arch/powerpc/kernel/setup_64.c       |  8 +++----
 8 files changed, 38 insertions(+), 55 deletions(-)

diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
index 28a7ace0a1b9..c91a60cda4fa 100644
--- a/arch/powerpc/include/asm/irq.h
+++ b/arch/powerpc/include/asm/irq.h
@@ -48,16 +48,16 @@ struct pt_regs;
  * Per-cpu stacks for handling critical, debug and machine check
  * level interrupts.
  */
-extern struct thread_info *critirq_ctx[NR_CPUS];
-extern struct thread_info *dbgirq_ctx[NR_CPUS];
-extern struct thread_info *mcheckirq_ctx[NR_CPUS];
+extern void *critirq_ctx[NR_CPUS];
+extern void *dbgirq_ctx[NR_CPUS];
+extern void *mcheckirq_ctx[NR_CPUS];
 #endif
 
 /*
  * Per-cpu stacks for handling hard and soft interrupts.
  */
-extern struct thread_info *hardirq_ctx[NR_CPUS];
-extern struct thread_info *softirq_ctx[NR_CPUS];
+extern void *hardirq_ctx[NR_CPUS];
+extern void *softirq_ctx[NR_CPUS];
 
 void call_do_softirq(void *sp);
 void call_do_irq(struct pt_regs *regs, void *sp);
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 9226fb83a82e..ba2f0bc680e4 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -267,8 +267,7 @@ struct thread_struct {
 #define ARCH_MIN_TASKALIGN 16
 
 #define INIT_SP		(sizeof(init_stack) + (unsigned long) &init_stack)
-#define INIT_SP_LIMIT \
-	(_ALIGN_UP(sizeof(struct thread_info), 16) + (unsigned long)&init_stack)
+#define INIT_SP_LIMIT	((unsigned long)&init_stack)
 
 #ifdef CONFIG_SPE
 #define SPEFSCR_INIT \
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 1fb52206c106..94ac190a0b16 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -92,7 +92,6 @@ int main(void)
 	DEFINE(SIGSEGV, SIGSEGV);
 	DEFINE(NMI_MASK, NMI_MASK);
 #else
-	DEFINE(THREAD_INFO_GAP, _ALIGN_UP(sizeof(struct thread_info), 16));
 	OFFSET(KSP_LIMIT, thread_struct, ksp_limit);
 #endif /* CONFIG_PPC64 */
 	OFFSET(TASK_STACK, task_struct, stack);
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 3255c0840beb..aea22c7b891f 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -97,14 +97,11 @@
 	mfspr	r0,SPRN_SRR1
 	stw	r0,_SRR1(r11)
 
-	/* set the stack limit to the current stack
-	 * and set the limit to protect the thread_info
-	 * struct
-	 */
+	/* set the stack limit to the current stack */
 	mfspr	r8,SPRN_SPRG_THREAD
 	lwz	r0,KSP_LIMIT(r8)
 	stw	r0,SAVED_KSP_LIMIT(r11)
-	rlwimi	r0,r1,0,0,(31-THREAD_SHIFT)
+	rlwinm	r0,r1,0,0,(31 - THREAD_SHIFT)
 	stw	r0,KSP_LIMIT(r8)
 	/* fall through */
 #endif
@@ -121,14 +118,11 @@
 	mfspr	r0,SPRN_SRR1
 	stw	r0,crit_srr1@l(0)
 
-	/* set the stack limit to the current stack
-	 * and set the limit to protect the thread_info
-	 * struct
-	 */
+	/* set the stack limit to the current stack */
 	mfspr	r8,SPRN_SPRG_THREAD
 	lwz	r0,KSP_LIMIT(r8)
 	stw	r0,saved_ksp_limit@l(0)
-	rlwimi	r0,r1,0,0,(31-THREAD_SHIFT)
+	rlwinm	r0,r1,0,0,(31 - THREAD_SHIFT)
 	stw	r0,KSP_LIMIT(r8)
 	/* fall through */
 #endif
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 85c48911938a..938944c6e2ee 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -618,9 +618,8 @@ static inline void check_stack_overflow(void)
 	sp = current_stack_pointer() & (THREAD_SIZE-1);
 
 	/* check for stack overflow: is there less than 2KB free? */
-	if (unlikely(sp < (sizeof(struct thread_info) + 2048))) {
-		pr_err("do_IRQ: stack overflow: %ld\n",
-			sp - sizeof(struct thread_info));
+	if (unlikely(sp < 2048)) {
+		pr_err("do_IRQ: stack overflow: %ld\n", sp);
 		dump_stack();
 	}
 #endif
@@ -660,7 +659,7 @@ void __do_irq(struct pt_regs *regs)
 void do_IRQ(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
-	struct thread_info *curtp, *irqtp, *sirqtp;
+	void *curtp, *irqtp, *sirqtp;
 
 	/* Switch to the irq stack to handle this */
 	curtp = (void *)(current_stack_pointer() & ~(THREAD_SIZE - 1));
@@ -686,17 +685,17 @@ void __init init_IRQ(void)
 }
 
 #if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
-struct thread_info   *critirq_ctx[NR_CPUS] __read_mostly;
-struct thread_info    *dbgirq_ctx[NR_CPUS] __read_mostly;
-struct thread_info *mcheckirq_ctx[NR_CPUS] __read_mostly;
+void   *critirq_ctx[NR_CPUS] __read_mostly;
+void    *dbgirq_ctx[NR_CPUS] __read_mostly;
+void *mcheckirq_ctx[NR_CPUS] __read_mostly;
 #endif
 
-struct thread_info *softirq_ctx[NR_CPUS] __read_mostly;
-struct thread_info *hardirq_ctx[NR_CPUS] __read_mostly;
+void *softirq_ctx[NR_CPUS] __read_mostly;
+void *hardirq_ctx[NR_CPUS] __read_mostly;
 
 void do_softirq_own_stack(void)
 {
-	struct thread_info *irqtp;
+	void *irqtp;
 
 	irqtp = softirq_ctx[smp_processor_id()];
 	call_do_softirq(irqtp);
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index b37b50fde828..6f6127c3760c 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -46,11 +46,10 @@ _GLOBAL(call_do_softirq)
 	mflr	r0
 	stw	r0,4(r1)
 	lwz	r10,THREAD+KSP_LIMIT(r2)
-	addi	r11,r3,THREAD_INFO_GAP
+	stw	r3, THREAD+KSP_LIMIT(r2)
 	stwu	r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3)
 	mr	r1,r3
 	stw	r10,8(r1)
-	stw	r11,THREAD+KSP_LIMIT(r2)
 	bl	__do_softirq
 	lwz	r10,8(r1)
 	lwz	r1,0(r1)
@@ -66,11 +65,10 @@ _GLOBAL(call_do_irq)
 	mflr	r0
 	stw	r0,4(r1)
 	lwz	r10,THREAD+KSP_LIMIT(r2)
-	addi	r11,r4,THREAD_INFO_GAP
+	stw	r4, THREAD+KSP_LIMIT(r2)
 	stwu	r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r4)
 	mr	r1,r4
 	stw	r10,8(r1)
-	stw	r11,THREAD+KSP_LIMIT(r2)
 	bl	__do_irq
 	lwz	r10,8(r1)
 	lwz	r1,0(r1)
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index d3c8af4c3a61..da82ab5dd743 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -1691,8 +1691,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	sp -= STACK_FRAME_OVERHEAD;
 	p->thread.ksp = sp;
 #ifdef CONFIG_PPC32
-	p->thread.ksp_limit = (unsigned long)task_stack_page(p) +
-				_ALIGN_UP(sizeof(struct thread_info), 16);
+	p->thread.ksp_limit = (unsigned long)end_of_stack(p);
 #endif
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 	p->thread.ptrace_bps[0] = NULL;
@@ -1995,21 +1994,14 @@ static inline int valid_irq_stack(unsigned long sp, struct task_struct *p,
 	unsigned long stack_page;
 	unsigned long cpu = task_cpu(p);
 
-	/*
-	 * Avoid crashing if the stack has overflowed and corrupted
-	 * task_cpu(p), which is in the thread_info struct.
-	 */
-	if (cpu < NR_CPUS && cpu_possible(cpu)) {
-		stack_page = (unsigned long) hardirq_ctx[cpu];
-		if (sp >= stack_page + sizeof(struct thread_struct)
-		    && sp <= stack_page + THREAD_SIZE - nbytes)
-			return 1;
-
-		stack_page = (unsigned long) softirq_ctx[cpu];
-		if (sp >= stack_page + sizeof(struct thread_struct)
-		    && sp <= stack_page + THREAD_SIZE - nbytes)
-			return 1;
-	}
+	stack_page = (unsigned long)hardirq_ctx[cpu];
+	if (sp >= stack_page && sp <= stack_page + THREAD_SIZE - nbytes)
+		return 1;
+
+	stack_page = (unsigned long)softirq_ctx[cpu];
+	if (sp >= stack_page && sp <= stack_page + THREAD_SIZE - nbytes)
+		return 1;
+
 	return 0;
 }
 
@@ -2018,8 +2010,10 @@ int validate_sp(unsigned long sp, struct task_struct *p,
 {
 	unsigned long stack_page = (unsigned long)task_stack_page(p);
 
-	if (sp >= stack_page + sizeof(struct thread_struct)
-	    && sp <= stack_page + THREAD_SIZE - nbytes)
+	if (sp < THREAD_SIZE)
+		return 0;
+
+	if (sp >= stack_page && sp <= stack_page + THREAD_SIZE - nbytes)
 		return 1;
 
 	return valid_irq_stack(sp, p, nbytes);
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 0912948a8ea6..2db1c5f7d141 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -716,19 +716,19 @@ void __init emergency_stack_init(void)
 	limit = min(ppc64_bolted_size(), ppc64_rma_size);
 
 	for_each_possible_cpu(i) {
-		struct thread_info *ti;
+		void *ti;
 
 		ti = alloc_stack(limit, i);
-		paca_ptrs[i]->emergency_sp = (void *)ti + THREAD_SIZE;
+		paca_ptrs[i]->emergency_sp = ti + THREAD_SIZE;
 
 #ifdef CONFIG_PPC_BOOK3S_64
 		/* emergency stack for NMI exception handling. */
 		ti = alloc_stack(limit, i);
-		paca_ptrs[i]->nmi_emergency_sp = (void *)ti + THREAD_SIZE;
+		paca_ptrs[i]->nmi_emergency_sp = ti + THREAD_SIZE;
 
 		/* emergency stack for machine check exception handling. */
 		ti = alloc_stack(limit, i);
-		paca_ptrs[i]->mc_emergency_sp = (void *)ti + THREAD_SIZE;
+		paca_ptrs[i]->mc_emergency_sp = ti + THREAD_SIZE;
 #endif
 	}
 }
-- 
2.20.1

[PATCH v16 18/21] powerpc: 'current_set' is now a table of task_struct pointers

[Michael Ellerman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

The table of pointers 'current_set' has been used for retrieving
the stack and current. They used to be thread_info pointers as
they were pointing to the stack and current was taken from the
'task' field of the thread_info.

Now, the pointers of 'current_set' table are now both pointers
to task_struct and pointers to thread_info.

As they are used to get current, and the stack pointer is
retrieved from current's stack field, this patch changes
their type to task_struct, and renames secondary_ti to
secondary_current.

Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/asm/asm-prototypes.h |  4 ++--
 arch/powerpc/kernel/head_32.S             |  6 +++---
 arch/powerpc/kernel/head_44x.S            |  4 ++--
 arch/powerpc/kernel/head_fsl_booke.S      |  4 ++--
 arch/powerpc/kernel/smp.c                 | 10 ++++------
 5 files changed, 13 insertions(+), 15 deletions(-)

diff --git a/arch/powerpc/include/asm/asm-prototypes.h b/arch/powerpc/include/asm/asm-prototypes.h
index 1d911f68a23b..1484df6779ab 100644
--- a/arch/powerpc/include/asm/asm-prototypes.h
+++ b/arch/powerpc/include/asm/asm-prototypes.h
@@ -23,8 +23,8 @@
 #include <uapi/asm/ucontext.h>
 
 /* SMP */
-extern struct thread_info *current_set[NR_CPUS];
-extern struct thread_info *secondary_ti;
+extern struct task_struct *current_set[NR_CPUS];
+extern struct task_struct *secondary_current;
 void start_secondary(void *unused);
 
 /* kexec */
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 309a45779ad5..146385b1c2da 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -846,9 +846,9 @@ _ENTRY(copy_and_flush)
 #endif /* CONFIG_PPC_BOOK3S_32 */
 
 	/* get current's stack and current */
-	lis	r1,secondary_ti@ha
-	tophys(r1,r1)
-	lwz	r2,secondary_ti@l(r1)
+	lis	r2,secondary_current@ha
+	tophys(r2,r2)
+	lwz	r2,secondary_current@l(r2)
 	tophys(r1,r2)
 	lwz	r1,TASK_STACK(r1)
 
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index f94a93b6c2f2..37117ab11584 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -1020,8 +1020,8 @@ _GLOBAL(start_secondary_47x)
 	/* Now we can get our task struct and real stack pointer */
 
 	/* Get current's stack and current */
-	lis	r1,secondary_ti@ha
-	lwz	r2,secondary_ti@l(r1)
+	lis	r2,secondary_current@ha
+	lwz	r2,secondary_current@l(r2)
 	lwz	r1,TASK_STACK(r2)
 
 	/* Current stack pointer */
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 11f38adbe020..4ed2a7c8e89b 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -1091,8 +1091,8 @@ _GLOBAL(set_context)
 	bl	call_setup_cpu
 
 	/* get current's stack and current */
-	lis	r1,secondary_ti@ha
-	lwz	r2,secondary_ti@l(r1)
+	lis	r2,secondary_current@ha
+	lwz	r2,secondary_current@l(r2)
 	lwz	r1,TASK_STACK(r2)
 
 	/* stack */
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index aa4517686f90..a41fa8924004 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -76,7 +76,7 @@
 static DEFINE_PER_CPU(int, cpu_state) = { 0 };
 #endif
 
-struct thread_info *secondary_ti;
+struct task_struct *secondary_current;
 bool has_big_cores;
 
 DEFINE_PER_CPU(cpumask_var_t, cpu_sibling_map);
@@ -664,7 +664,7 @@ void smp_send_stop(void)
 }
 #endif /* CONFIG_NMI_IPI */
 
-struct thread_info *current_set[NR_CPUS];
+struct task_struct *current_set[NR_CPUS];
 
 static void smp_store_cpu_info(int id)
 {
@@ -929,7 +929,7 @@ void smp_prepare_boot_cpu(void)
 	paca_ptrs[boot_cpuid]->__current = current;
 #endif
 	set_numa_node(numa_cpu_lookup_table[boot_cpuid]);
-	current_set[boot_cpuid] = task_thread_info(current);
+	current_set[boot_cpuid] = current;
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
@@ -1014,15 +1014,13 @@ static bool secondaries_inhibited(void)
 
 static void cpu_idle_thread_init(unsigned int cpu, struct task_struct *idle)
 {
-	struct thread_info *ti = task_thread_info(idle);
-
 #ifdef CONFIG_PPC64
 	paca_ptrs[cpu]->__current = idle;
 	paca_ptrs[cpu]->kstack = (unsigned long)task_stack_page(idle) +
 				 THREAD_SIZE - STACK_FRAME_OVERHEAD;
 #endif
 	idle->cpu = cpu;
-	secondary_ti = current_set[cpu] = ti;
+	secondary_current = current_set[cpu] = idle;
 }
 
 int __cpu_up(unsigned int cpu, struct task_struct *tidle)
-- 
2.20.1

[PATCH v16 19/21] powerpc/32: Remove CURRENT_THREAD_INFO and rename TI_CPU

[Michael Ellerman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

Now that thread_info is similar to task_struct, its address is in r2
so CURRENT_THREAD_INFO() macro is useless. This patch removes it.

This patch also moves the 'tovirt(r2, r2)' down just before the
reactivation of MMU translation, so that we keep the physical address
of 'current' in r2 until then. It avoids a few calls to tophys().

At the same time, as the 'cpu' field is not anymore in thread_info,
TI_CPU is renamed TASK_CPU by this patch.

It also allows to get rid of a couple of
'#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE' as ACCOUNT_CPU_USER_ENTRY()
and ACCOUNT_CPU_USER_EXIT() are empty when
CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not defined.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/Makefile                  |  2 +-
 arch/powerpc/include/asm/thread_info.h |  2 -
 arch/powerpc/kernel/asm-offsets.c      |  2 +-
 arch/powerpc/kernel/entry_32.S         | 55 +++++++++-----------------
 arch/powerpc/kernel/epapr_hcalls.S     |  5 +--
 arch/powerpc/kernel/head_fsl_booke.S   |  5 +--
 arch/powerpc/kernel/idle_6xx.S         |  9 ++---
 arch/powerpc/kernel/idle_e500.S        |  8 ++--
 arch/powerpc/kernel/misc_32.S          |  3 +-
 arch/powerpc/mm/hash_low_32.S          | 14 +++----
 arch/powerpc/sysdev/6xx-suspend.S      |  5 +--
 11 files changed, 38 insertions(+), 72 deletions(-)

diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 53ffe935f3b0..7de49889bd5d 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -431,7 +431,7 @@ ifdef CONFIG_SMP
 prepare: task_cpu_prepare
 
 task_cpu_prepare: prepare0
-	$(eval KBUILD_CFLAGS += -D_TASK_CPU=$(shell awk '{if ($$2 == "TI_CPU") print $$3;}' include/generated/asm-offsets.h))
+	$(eval KBUILD_CFLAGS += -D_TASK_CPU=$(shell awk '{if ($$2 == "TASK_CPU") print $$3;}' include/generated/asm-offsets.h))
 endif
 
 # Check toolchain versions:
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
index d91523c2c7d8..c959b8d66cac 100644
--- a/arch/powerpc/include/asm/thread_info.h
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -19,8 +19,6 @@
 
 #ifdef CONFIG_PPC64
 #define CURRENT_THREAD_INFO(dest, sp)	stringify_in_c(ld dest, PACACURRENT(r13))
-#else
-#define CURRENT_THREAD_INFO(dest, sp)	stringify_in_c(mr dest, r2)
 #endif
 
 #ifndef __ASSEMBLY__
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 94ac190a0b16..03439785c2ea 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -96,7 +96,7 @@ int main(void)
 #endif /* CONFIG_PPC64 */
 	OFFSET(TASK_STACK, task_struct, stack);
 #ifdef CONFIG_SMP
-	OFFSET(TI_CPU, task_struct, cpu);
+	OFFSET(TASK_CPU, task_struct, cpu);
 #endif
 
 #ifdef CONFIG_LIVEPATCH
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index aea22c7b891f..a5e2d5585dcb 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -151,7 +151,6 @@
 	stw	r2,_XER(r11)
 	mfspr	r12,SPRN_SPRG_THREAD
 	addi	r2,r12,-THREAD
-	tovirt(r2,r2)			/* set r2 to current */
 	beq	2f			/* if from user, fix up THREAD.regs */
 	addi	r11,r1,STACK_FRAME_OVERHEAD
 	stw	r11,PT_REGS(r12)
@@ -161,11 +160,7 @@
 	lwz	r12,THREAD_DBCR0(r12)
 	andis.	r12,r12,DBCR0_IDM@h
 #endif
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
-	CURRENT_THREAD_INFO(r9, r1)
-	tophys(r9, r9)
-	ACCOUNT_CPU_USER_ENTRY(r9, r11, r12)
-#endif
+	ACCOUNT_CPU_USER_ENTRY(r2, r11, r12)
 #if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
 	beq+	3f
 	/* From user and task is ptraced - load up global dbcr0 */
@@ -175,8 +170,7 @@
 	tophys(r11,r11)
 	addi	r11,r11,global_dbcr0@l
 #ifdef CONFIG_SMP
-	CURRENT_THREAD_INFO(r9, r1)
-	lwz	r9,TI_CPU(r9)
+	lwz	r9,TASK_CPU(r2)
 	slwi	r9,r9,3
 	add	r11,r11,r9
 #endif
@@ -197,9 +191,7 @@
 	ble-	stack_ovf		/* then the kernel stack overflowed */
 5:
 #if defined(CONFIG_PPC_BOOK3S_32) || defined(CONFIG_E500)
-	CURRENT_THREAD_INFO(r9, r1)
-	tophys(r9,r9)			/* check local flags */
-	lwz	r12,TI_LOCAL_FLAGS(r9)
+	lwz	r12,TI_LOCAL_FLAGS(r2)
 	mtcrf	0x01,r12
 	bt-	31-TLF_NAPPING,4f
 	bt-	31-TLF_SLEEPING,7f
@@ -208,6 +200,7 @@
 transfer_to_handler_cont:
 3:
 	mflr	r9
+	tovirt(r2, r2)			/* set r2 to current */
 	lwz	r11,0(r9)		/* virtual address of handler */
 	lwz	r9,4(r9)		/* where to go when done */
 #if defined(CONFIG_PPC_8xx) && defined(CONFIG_PERF_EVENTS)
@@ -271,11 +264,11 @@ reenable_mmu:				/* re-enable mmu so we can */
 
 #if defined (CONFIG_PPC_BOOK3S_32) || defined(CONFIG_E500)
 4:	rlwinm	r12,r12,0,~_TLF_NAPPING
-	stw	r12,TI_LOCAL_FLAGS(r9)
+	stw	r12,TI_LOCAL_FLAGS(r2)
 	b	power_save_ppc32_restore
 
 7:	rlwinm	r12,r12,0,~_TLF_SLEEPING
-	stw	r12,TI_LOCAL_FLAGS(r9)
+	stw	r12,TI_LOCAL_FLAGS(r2)
 	lwz	r9,_MSR(r11)		/* if sleeping, clear MSR.EE */
 	rlwinm	r9,r9,0,~MSR_EE
 	lwz	r12,_LINK(r11)		/* and return to address in LR */
@@ -347,8 +340,7 @@ _GLOBAL(DoSyscall)
 	mtmsr	r11
 1:
 #endif /* CONFIG_TRACE_IRQFLAGS */
-	CURRENT_THREAD_INFO(r10, r1)
-	lwz	r11,TI_FLAGS(r10)
+	lwz	r11,TI_FLAGS(r2)
 	andi.	r11,r11,_TIF_SYSCALL_DOTRACE
 	bne-	syscall_dotrace
 syscall_dotrace_cont:
@@ -381,13 +373,12 @@ _GLOBAL(DoSyscall)
 	lwz	r3,GPR3(r1)
 #endif
 	mr	r6,r3
-	CURRENT_THREAD_INFO(r12, r1)
 	/* disable interrupts so current_thread_info()->flags can't change */
 	LOAD_MSR_KERNEL(r10,MSR_KERNEL)	/* doesn't include MSR_EE */
 	/* Note: We don't bother telling lockdep about it */
 	SYNC
 	MTMSRD(r10)
-	lwz	r9,TI_FLAGS(r12)
+	lwz	r9,TI_FLAGS(r2)
 	li	r8,-MAX_ERRNO
 	andi.	r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
 	bne-	syscall_exit_work
@@ -434,8 +425,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
 	andi.	r4,r8,MSR_PR
 	beq	3f
-	CURRENT_THREAD_INFO(r4, r1)
-	ACCOUNT_CPU_USER_EXIT(r4, r5, r7)
+	ACCOUNT_CPU_USER_EXIT(r2, r5, r7)
 3:
 #endif
 	lwz	r4,_LINK(r1)
@@ -528,7 +518,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
 	/* Clear per-syscall TIF flags if any are set.  */
 
 	li	r11,_TIF_PERSYSCALL_MASK
-	addi	r12,r12,TI_FLAGS
+	addi	r12,r2,TI_FLAGS
 3:	lwarx	r8,0,r12
 	andc	r8,r8,r11
 #ifdef CONFIG_IBM405_ERR77
@@ -536,7 +526,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
 #endif
 	stwcx.	r8,0,r12
 	bne-	3b
-	subi	r12,r12,TI_FLAGS
 	
 4:	/* Anything which requires enabling interrupts? */
 	andi.	r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP)
@@ -815,8 +804,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_601)
 
 user_exc_return:		/* r10 contains MSR_KERNEL here */
 	/* Check current_thread_info()->flags */
-	CURRENT_THREAD_INFO(r9, r1)
-	lwz	r9,TI_FLAGS(r9)
+	lwz	r9,TI_FLAGS(r2)
 	andi.	r0,r9,_TIF_USER_WORK_MASK
 	bne	do_work
 
@@ -828,18 +816,14 @@ user_exc_return:		/* r10 contains MSR_KERNEL here */
 	andis.	r10,r0,DBCR0_IDM@h
 	bnel-	load_dbcr0
 #endif
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
-	CURRENT_THREAD_INFO(r9, r1)
-	ACCOUNT_CPU_USER_EXIT(r9, r10, r11)
-#endif
+	ACCOUNT_CPU_USER_EXIT(r2, r10, r11)
 
 	b	restore
 
 /* N.B. the only way to get here is from the beq following ret_from_except. */
 resume_kernel:
 	/* check current_thread_info, _TIF_EMULATE_STACK_STORE */
-	CURRENT_THREAD_INFO(r9, r1)
-	lwz	r8,TI_FLAGS(r9)
+	lwz	r8,TI_FLAGS(r2)
 	andis.	r0,r8,_TIF_EMULATE_STACK_STORE@h
 	beq+	1f
 
@@ -865,7 +849,7 @@ user_exc_return:		/* r10 contains MSR_KERNEL here */
 
 	/* Clear _TIF_EMULATE_STACK_STORE flag */
 	lis	r11,_TIF_EMULATE_STACK_STORE@h
-	addi	r5,r9,TI_FLAGS
+	addi	r5,r2,TI_FLAGS
 0:	lwarx	r8,0,r5
 	andc	r8,r8,r11
 #ifdef CONFIG_IBM405_ERR77
@@ -877,7 +861,7 @@ user_exc_return:		/* r10 contains MSR_KERNEL here */
 
 #ifdef CONFIG_PREEMPT
 	/* check current_thread_info->preempt_count */
-	lwz	r0,TI_PREEMPT(r9)
+	lwz	r0,TI_PREEMPT(r2)
 	cmpwi	0,r0,0		/* if non-zero, just restore regs and return */
 	bne	restore
 	andi.	r8,r8,_TIF_NEED_RESCHED
@@ -893,8 +877,7 @@ user_exc_return:		/* r10 contains MSR_KERNEL here */
 	bl	trace_hardirqs_off
 #endif
 1:	bl	preempt_schedule_irq
-	CURRENT_THREAD_INFO(r9, r1)
-	lwz	r3,TI_FLAGS(r9)
+	lwz	r3,TI_FLAGS(r2)
 	andi.	r0,r3,_TIF_NEED_RESCHED
 	bne-	1b
 #ifdef CONFIG_TRACE_IRQFLAGS
@@ -1193,8 +1176,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
 	lis	r11,global_dbcr0@ha
 	addi	r11,r11,global_dbcr0@l
 #ifdef CONFIG_SMP
-	CURRENT_THREAD_INFO(r9, r1)
-	lwz	r9,TI_CPU(r9)
+	lwz	r9,TASK_CPU(r2)
 	slwi	r9,r9,3
 	add	r11,r11,r9
 #endif
@@ -1234,8 +1216,7 @@ do_resched:			/* r10 contains MSR_KERNEL here */
 	LOAD_MSR_KERNEL(r10,MSR_KERNEL)
 	SYNC
 	MTMSRD(r10)		/* disable interrupts */
-	CURRENT_THREAD_INFO(r9, r1)
-	lwz	r9,TI_FLAGS(r9)
+	lwz	r9,TI_FLAGS(r2)
 	andi.	r0,r9,_TIF_NEED_RESCHED
 	bne-	do_resched
 	andi.	r0,r9,_TIF_USER_WORK_MASK
diff --git a/arch/powerpc/kernel/epapr_hcalls.S b/arch/powerpc/kernel/epapr_hcalls.S
index 52ca2471ee1a..d252f4663a23 100644
--- a/arch/powerpc/kernel/epapr_hcalls.S
+++ b/arch/powerpc/kernel/epapr_hcalls.S
@@ -21,10 +21,9 @@
 #ifndef CONFIG_PPC64
 /* epapr_ev_idle() was derived from e500_idle() */
 _GLOBAL(epapr_ev_idle)
-	CURRENT_THREAD_INFO(r3, r1)
-	PPC_LL	r4, TI_LOCAL_FLAGS(r3)	/* set napping bit */
+	PPC_LL	r4, TI_LOCAL_FLAGS(r2)	/* set napping bit */
 	ori	r4, r4,_TLF_NAPPING	/* so when we take an exception */
-	PPC_STL	r4, TI_LOCAL_FLAGS(r3)	/* it will return to our caller */
+	PPC_STL	r4, TI_LOCAL_FLAGS(r2)	/* it will return to our caller */
 
 	wrteei	1
 
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 4ed2a7c8e89b..1881127682e9 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -244,8 +244,7 @@ _ENTRY(__early_start)
 	stwu	r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
 
 #ifdef CONFIG_SMP
-	CURRENT_THREAD_INFO(r22, r1)
-	stw	r24, TI_CPU(r22)
+	stw	r24, TASK_CPU(r2)
 #endif
 
 	bl	early_init
@@ -719,7 +718,7 @@ END_BTB_FLUSH_SECTION
 
 	/* Get the next_tlbcam_idx percpu var */
 #ifdef CONFIG_SMP
-	lwz	r15, TI_CPU-THREAD(r12)
+	lwz	r15, TASK_CPU-THREAD(r12)
 	lis     r14, __per_cpu_offset@h
 	ori     r14, r14, __per_cpu_offset@l
 	rlwinm  r15, r15, 2, 0, 29
diff --git a/arch/powerpc/kernel/idle_6xx.S b/arch/powerpc/kernel/idle_6xx.S
index d9b6e7e0b5e3..5e69fefcd9c4 100644
--- a/arch/powerpc/kernel/idle_6xx.S
+++ b/arch/powerpc/kernel/idle_6xx.S
@@ -136,10 +136,9 @@ BEGIN_FTR_SECTION
 	DSSALL
 	sync
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-	CURRENT_THREAD_INFO(r9, r1)
-	lwz	r8,TI_LOCAL_FLAGS(r9)	/* set napping bit */
+	lwz	r8,TI_LOCAL_FLAGS(r2)	/* set napping bit */
 	ori	r8,r8,_TLF_NAPPING	/* so when we take an exception */
-	stw	r8,TI_LOCAL_FLAGS(r9)	/* it will return to our caller */
+	stw	r8,TI_LOCAL_FLAGS(r2)	/* it will return to our caller */
 	mfmsr	r7
 	ori	r7,r7,MSR_EE
 	oris	r7,r7,MSR_POW@h
@@ -159,9 +158,7 @@ _GLOBAL(power_save_ppc32_restore)
 	stw	r9,_NIP(r11)		/* make it do a blr */
 
 #ifdef CONFIG_SMP
-	CURRENT_THREAD_INFO(r12, r1)
-	tophys(r12, r12)
-	lwz	r11,TI_CPU(r12)		/* get cpu number * 4 */
+	lwz	r11,TI_CPU(r2)		/* get cpu number * 4 */
 	slwi	r11,r11,2
 #else
 	li	r11,0
diff --git a/arch/powerpc/kernel/idle_e500.S b/arch/powerpc/kernel/idle_e500.S
index 583e55ac7d26..69dfcd2ca011 100644
--- a/arch/powerpc/kernel/idle_e500.S
+++ b/arch/powerpc/kernel/idle_e500.S
@@ -22,10 +22,9 @@
 	.text
 
 _GLOBAL(e500_idle)
-	CURRENT_THREAD_INFO(r3, r1)
-	lwz	r4,TI_LOCAL_FLAGS(r3)	/* set napping bit */
+	lwz	r4,TI_LOCAL_FLAGS(r2)	/* set napping bit */
 	ori	r4,r4,_TLF_NAPPING	/* so when we take an exception */
-	stw	r4,TI_LOCAL_FLAGS(r3)	/* it will return to our caller */
+	stw	r4,TI_LOCAL_FLAGS(r2)	/* it will return to our caller */
 
 #ifdef CONFIG_PPC_E500MC
 	wrteei	1
@@ -88,8 +87,7 @@ _GLOBAL(power_save_ppc32_restore)
 	stw	r9,_NIP(r11)		/* make it do a blr */
 
 #ifdef CONFIG_SMP
-	CURRENT_THREAD_INFO(r12, r1)
-	lwz	r11,TI_CPU(r12)		/* get cpu number * 4 */
+	lwz	r11,TASK_CPU(r2)		/* get cpu number * 4 */
 	slwi	r11,r11,2
 #else
 	li	r11,0
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 6f6127c3760c..0dda4f8e3d7a 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -183,8 +183,7 @@ _GLOBAL(low_choose_750fx_pll)
 
 #ifdef CONFIG_SMP
 	/* Store new HID1 image */
-	CURRENT_THREAD_INFO(r6, r1)
-	lwz	r6,TI_CPU(r6)
+	lwz	r6,TASK_CPU(r2)
 	slwi	r6,r6,2
 #else
 	li	r6, 0
diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S
index 1e2df3e9f9ea..5bee2d982959 100644
--- a/arch/powerpc/mm/hash_low_32.S
+++ b/arch/powerpc/mm/hash_low_32.S
@@ -186,8 +186,7 @@ _GLOBAL(add_hash_page)
 	add	r3,r3,r0		/* note create_hpte trims to 24 bits */
 
 #ifdef CONFIG_SMP
-	CURRENT_THREAD_INFO(r8, r1)	/* use cpu number to make tag */
-	lwz	r8,TI_CPU(r8)		/* to go in mmu_hash_lock */
+	lwz	r8,TASK_CPU(r2)		/* to go in mmu_hash_lock */
 	oris	r8,r8,12
 #endif /* CONFIG_SMP */
 
@@ -549,9 +548,8 @@ _GLOBAL(flush_hash_pages)
 #ifdef CONFIG_SMP
 	addis	r9,r7,mmu_hash_lock@ha
 	addi	r9,r9,mmu_hash_lock@l
-	CURRENT_THREAD_INFO(r8, r1)
-	add	r8,r8,r7
-	lwz	r8,TI_CPU(r8)
+	add	r8,r2,r7
+	lwz	r8,TASK_CPU(r8)
 	oris	r8,r8,9
 10:	lwarx	r0,0,r9
 	cmpi	0,r0,0
@@ -646,8 +644,7 @@ EXPORT_SYMBOL(flush_hash_pages)
  */
 _GLOBAL(_tlbie)
 #ifdef CONFIG_SMP
-	CURRENT_THREAD_INFO(r8, r1)
-	lwz	r8,TI_CPU(r8)
+	lwz	r8,TASK_CPU(r2)
 	oris	r8,r8,11
 	mfmsr	r10
 	SYNC
@@ -684,8 +681,7 @@ _GLOBAL(_tlbie)
  */
 _GLOBAL(_tlbia)
 #if defined(CONFIG_SMP)
-	CURRENT_THREAD_INFO(r8, r1)
-	lwz	r8,TI_CPU(r8)
+	lwz	r8,TASK_CPU(r2)
 	oris	r8,r8,10
 	mfmsr	r10
 	SYNC
diff --git a/arch/powerpc/sysdev/6xx-suspend.S b/arch/powerpc/sysdev/6xx-suspend.S
index cf48e9cb2575..6c4aec25c4ba 100644
--- a/arch/powerpc/sysdev/6xx-suspend.S
+++ b/arch/powerpc/sysdev/6xx-suspend.S
@@ -29,10 +29,9 @@ _GLOBAL(mpc6xx_enter_standby)
 	ori	r5, r5, ret_from_standby@l
 	mtlr	r5
 
-	CURRENT_THREAD_INFO(r5, r1)
-	lwz	r6, TI_LOCAL_FLAGS(r5)
+	lwz	r6, TI_LOCAL_FLAGS(r2)
 	ori	r6, r6, _TLF_SLEEPING
-	stw	r6, TI_LOCAL_FLAGS(r5)
+	stw	r6, TI_LOCAL_FLAGS(r2)
 
 	mfmsr	r5
 	ori	r5, r5, MSR_EE
-- 
2.20.1

[PATCH v16 20/21] powerpc/64: Replace CURRENT_THREAD_INFO with PACA_CURRENT_TI

[Michael Ellerman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

Now that current_thread_info is located at the beginning of 'current'
task struct, CURRENT_THREAD_INFO macro is not really needed any more.

This patch replaces it by loads of the value at PACA_CURRENT_TI(r13).

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Add PACA_CURRENT_TI rather than using PACACURRENT]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/asm/exception-64s.h       |  4 ++--
 arch/powerpc/include/asm/thread_info.h         |  4 ----
 arch/powerpc/kernel/asm-offsets.c              |  2 ++
 arch/powerpc/kernel/entry_64.S                 | 10 +++++-----
 arch/powerpc/kernel/exceptions-64e.S           |  2 +-
 arch/powerpc/kernel/exceptions-64s.S           |  2 +-
 arch/powerpc/kernel/idle_book3e.S              |  2 +-
 arch/powerpc/kernel/idle_power4.S              |  2 +-
 arch/powerpc/kernel/trace/ftrace_64_mprofile.S |  6 +++---
 9 files changed, 16 insertions(+), 18 deletions(-)

diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index 3b4767ed3ec5..f0f0ff192e87 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -671,7 +671,7 @@ END_FTR_SECTION_NESTED(ftr,ftr,943)
 
 #define RUNLATCH_ON				\
 BEGIN_FTR_SECTION				\
-	CURRENT_THREAD_INFO(r3, r1);		\
+	ld	r3, PACA_CURRENT_TI(r13);	\
 	ld	r4,TI_LOCAL_FLAGS(r3);		\
 	andi.	r0,r4,_TLF_RUNLATCH;		\
 	beql	ppc64_runlatch_on_trampoline;	\
@@ -721,7 +721,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_CTRL)
 #ifdef CONFIG_PPC_970_NAP
 #define FINISH_NAP				\
 BEGIN_FTR_SECTION				\
-	CURRENT_THREAD_INFO(r11, r1);		\
+	ld	r11, PACA_CURRENT_TI(r13);	\
 	ld	r9,TI_LOCAL_FLAGS(r11);		\
 	andi.	r10,r9,_TLF_NAPPING;		\
 	bnel	power4_fixup_nap;		\
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
index c959b8d66cac..8e1d0195ac36 100644
--- a/arch/powerpc/include/asm/thread_info.h
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -17,10 +17,6 @@
 
 #define THREAD_SIZE		(1 << THREAD_SHIFT)
 
-#ifdef CONFIG_PPC64
-#define CURRENT_THREAD_INFO(dest, sp)	stringify_in_c(ld dest, PACACURRENT(r13))
-#endif
-
 #ifndef __ASSEMBLY__
 #include <linux/cache.h>
 #include <asm/processor.h>
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 03439785c2ea..7a1b93c5af63 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -179,6 +179,8 @@ int main(void)
 	OFFSET(PACAPROCSTART, paca_struct, cpu_start);
 	OFFSET(PACAKSAVE, paca_struct, kstack);
 	OFFSET(PACACURRENT, paca_struct, __current);
+	DEFINE(PACA_CURRENT_TI, offsetof(struct paca_struct, __current) +
+				offsetof(struct task_struct, thread_info));
 	OFFSET(PACASAVEDMSR, paca_struct, saved_msr);
 	OFFSET(PACAR1, paca_struct, saved_r1);
 	OFFSET(PACATOC, paca_struct, kernel_toc);
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 21f1cb4d464e..259fcc82ec75 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -166,7 +166,7 @@ system_call:			/* label this so stack traces look sane */
 	li	r10,IRQS_ENABLED
 	std	r10,SOFTE(r1)
 
-	CURRENT_THREAD_INFO(r11, r1)
+	ld	r11, PACA_CURRENT_TI(r13)
 	ld	r10,TI_FLAGS(r11)
 	andi.	r11,r10,_TIF_SYSCALL_DOTRACE
 	bne	.Lsyscall_dotrace		/* does not return */
@@ -213,7 +213,7 @@ system_call:			/* label this so stack traces look sane */
 	ld	r3,RESULT(r1)
 #endif
 
-	CURRENT_THREAD_INFO(r12, r1)
+	ld	r12, PACA_CURRENT_TI(r13)
 
 	ld	r8,_MSR(r1)
 #ifdef CONFIG_PPC_BOOK3S
@@ -346,7 +346,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 
 	/* Repopulate r9 and r10 for the syscall path */
 	addi	r9,r1,STACK_FRAME_OVERHEAD
-	CURRENT_THREAD_INFO(r10, r1)
+	ld	r10, PACA_CURRENT_TI(r13)
 	ld	r10,TI_FLAGS(r10)
 
 	cmpldi	r0,NR_syscalls
@@ -740,7 +740,7 @@ _GLOBAL(ret_from_except_lite)
 	mtmsrd	r10,1		  /* Update machine state */
 #endif /* CONFIG_PPC_BOOK3E */
 
-	CURRENT_THREAD_INFO(r9, r1)
+	ld	r9, PACA_CURRENT_TI(r13)
 	ld	r3,_MSR(r1)
 #ifdef CONFIG_PPC_BOOK3E
 	ld	r10,PACACURRENT(r13)
@@ -854,7 +854,7 @@ _GLOBAL(ret_from_except_lite)
 1:	bl	preempt_schedule_irq
 
 	/* Re-test flags and eventually loop */
-	CURRENT_THREAD_INFO(r9, r1)
+	ld	r9, PACA_CURRENT_TI(r13)
 	ld	r4,TI_FLAGS(r9)
 	andi.	r0,r4,_TIF_NEED_RESCHED
 	bne	1b
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 20f14996281d..92d5ded2b290 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -493,7 +493,7 @@ exc_##n##_bad_stack:							    \
  * interrupts happen before the wait instruction.
  */
 #define CHECK_NAPPING()							\
-	CURRENT_THREAD_INFO(r11, r1);					\
+	ld	r11, PACA_CURRENT_TI(r13);				\
 	ld	r10,TI_LOCAL_FLAGS(r11);				\
 	andi.	r9,r10,_TLF_NAPPING;					\
 	beq+	1f;							\
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 9e253ce27e08..83be18d478b8 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1629,7 +1629,7 @@ USE_TEXT_SECTION()
 	ori	r0,r0,DSISR_BAD_FAULT_64S@l
 	and.	r0,r4,r0		/* weird error? */
 	bne-	handle_page_fault	/* if not, try to insert a HPTE */
-	CURRENT_THREAD_INFO(r11, r1)
+	ld	r11, PACA_CURRENT_TI(r13)
 	lwz	r0,TI_PREEMPT(r11)	/* If we're in an "NMI" */
 	andis.	r0,r0,NMI_MASK@h	/* (i.e. an irq when soft-disabled) */
 	bne	77f			/* then don't call hash_page now */
diff --git a/arch/powerpc/kernel/idle_book3e.S b/arch/powerpc/kernel/idle_book3e.S
index 4e0d94d02030..31e732c378ad 100644
--- a/arch/powerpc/kernel/idle_book3e.S
+++ b/arch/powerpc/kernel/idle_book3e.S
@@ -63,7 +63,7 @@ _GLOBAL(\name)
 1:	/* Let's set the _TLF_NAPPING flag so interrupts make us return
 	 * to the right spot
 	*/
-	CURRENT_THREAD_INFO(r11, r1)
+	ld	r11, PACACURRENT(r13)
 	ld	r10,TI_LOCAL_FLAGS(r11)
 	ori	r10,r10,_TLF_NAPPING
 	std	r10,TI_LOCAL_FLAGS(r11)
diff --git a/arch/powerpc/kernel/idle_power4.S b/arch/powerpc/kernel/idle_power4.S
index a09b3c7ca176..b4c849f9f0e2 100644
--- a/arch/powerpc/kernel/idle_power4.S
+++ b/arch/powerpc/kernel/idle_power4.S
@@ -68,7 +68,7 @@ BEGIN_FTR_SECTION
 	DSSALL
 	sync
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-	CURRENT_THREAD_INFO(r9, r1)
+	ld	r9, PACA_CURRENT_TI(r13)
 	ld	r8,TI_LOCAL_FLAGS(r9)	/* set napping bit */
 	ori	r8,r8,_TLF_NAPPING	/* so when we take an exception */
 	std	r8,TI_LOCAL_FLAGS(r9)	/* it will return to our caller */
diff --git a/arch/powerpc/kernel/trace/ftrace_64_mprofile.S b/arch/powerpc/kernel/trace/ftrace_64_mprofile.S
index 32476a6e4e9c..17ec02cb2f58 100644
--- a/arch/powerpc/kernel/trace/ftrace_64_mprofile.S
+++ b/arch/powerpc/kernel/trace/ftrace_64_mprofile.S
@@ -229,7 +229,7 @@ _GLOBAL(ftrace_caller)
 	 *  - r0, r11 & r12 are free
 	 */
 livepatch_handler:
-	CURRENT_THREAD_INFO(r12, r1)
+	ld	r12, PACA_CURRENT_TI(r13)
 
 	/* Allocate 3 x 8 bytes */
 	ld	r11, TI_livepatch_sp(r12)
@@ -256,7 +256,7 @@ _GLOBAL(ftrace_caller)
 	 * restore it.
 	 */
 
-	CURRENT_THREAD_INFO(r12, r1)
+	ld	r12, PACA_CURRENT_TI(r13)
 
 	ld	r11, TI_livepatch_sp(r12)
 
@@ -273,7 +273,7 @@ _GLOBAL(ftrace_caller)
 	ld	r2,  -24(r11)
 
 	/* Pop livepatch stack frame */
-	CURRENT_THREAD_INFO(r12, r1)
+	ld	r12, PACA_CURRENT_TI(r13)
 	subi	r11, r11, 24
 	std	r11, TI_livepatch_sp(r12)
 
-- 
2.20.1

[PATCH v16 21/21] powerpc: clean stack pointers naming

[Michael Ellerman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

Some stack pointers used to also be thread_info pointers
and were called tp. Now that they are only stack pointers,
rename them sp.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/irq.c      | 17 +++++++----------
 arch/powerpc/kernel/setup_64.c | 11 +++--------
 2 files changed, 10 insertions(+), 18 deletions(-)

diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 938944c6e2ee..8a936723c791 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -659,21 +659,21 @@ void __do_irq(struct pt_regs *regs)
 void do_IRQ(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
-	void *curtp, *irqtp, *sirqtp;
+	void *cursp, *irqsp, *sirqsp;
 
 	/* Switch to the irq stack to handle this */
-	curtp = (void *)(current_stack_pointer() & ~(THREAD_SIZE - 1));
-	irqtp = hardirq_ctx[raw_smp_processor_id()];
-	sirqtp = softirq_ctx[raw_smp_processor_id()];
+	cursp = (void *)(current_stack_pointer() & ~(THREAD_SIZE - 1));
+	irqsp = hardirq_ctx[raw_smp_processor_id()];
+	sirqsp = softirq_ctx[raw_smp_processor_id()];
 
 	/* Already there ? */
-	if (unlikely(curtp == irqtp || curtp == sirqtp)) {
+	if (unlikely(cursp == irqsp || cursp == sirqsp)) {
 		__do_irq(regs);
 		set_irq_regs(old_regs);
 		return;
 	}
 	/* Switch stack and call */
-	call_do_irq(regs, irqtp);
+	call_do_irq(regs, irqsp);
 
 	set_irq_regs(old_regs);
 }
@@ -695,10 +695,7 @@ void *hardirq_ctx[NR_CPUS] __read_mostly;
 
 void do_softirq_own_stack(void)
 {
-	void *irqtp;
-
-	irqtp = softirq_ctx[smp_processor_id()];
-	call_do_softirq(irqtp);
+	call_do_softirq(softirq_ctx[smp_processor_id()]);
 }
 
 irq_hw_number_t virq_to_hw(unsigned int virq)
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 2db1c5f7d141..daa361fc6a24 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -716,19 +716,14 @@ void __init emergency_stack_init(void)
 	limit = min(ppc64_bolted_size(), ppc64_rma_size);
 
 	for_each_possible_cpu(i) {
-		void *ti;
-
-		ti = alloc_stack(limit, i);
-		paca_ptrs[i]->emergency_sp = ti + THREAD_SIZE;
+		paca_ptrs[i]->emergency_sp = alloc_stack(limit, i) + THREAD_SIZE;
 
 #ifdef CONFIG_PPC_BOOK3S_64
 		/* emergency stack for NMI exception handling. */
-		ti = alloc_stack(limit, i);
-		paca_ptrs[i]->nmi_emergency_sp = ti + THREAD_SIZE;
+		paca_ptrs[i]->nmi_emergency_sp = alloc_stack(limit, i) + THREAD_SIZE;
 
 		/* emergency stack for machine check exception handling. */
-		ti = alloc_stack(limit, i);
-		paca_ptrs[i]->mc_emergency_sp = ti + THREAD_SIZE;
+		paca_ptrs[i]->mc_emergency_sp = alloc_stack(limit, i) + THREAD_SIZE;
 #endif
 	}
 }
-- 
2.20.1

Re: [PATCH v16 19/21] powerpc/32: Remove CURRENT_THREAD_INFO and rename TI_CPU

[Michael Ellerman]

Michael Ellerman <mpe@ellerman.id.au> writes:

> diff --git a/arch/powerpc/kernel/idle_6xx.S b/arch/powerpc/kernel/idle_6xx.S
> index d9b6e7e0b5e3..5e69fefcd9c4 100644
> --- a/arch/powerpc/kernel/idle_6xx.S
> +++ b/arch/powerpc/kernel/idle_6xx.S
> @@ -159,9 +158,7 @@ _GLOBAL(power_save_ppc32_restore)
>  	stw	r9,_NIP(r11)		/* make it do a blr */
>  
>  #ifdef CONFIG_SMP
> -	CURRENT_THREAD_INFO(r12, r1)
> -	tophys(r12, r12)
> -	lwz	r11,TI_CPU(r12)		/* get cpu number * 4 */
> +	lwz	r11,TI_CPU(r2)		/* get cpu number * 4 */
                    ^
                    missed conversion to TASK_CPU here. I've fixed it up.

cheers

Re: [PATCH v16 01/21] powerpc/irq: use memblock functions returning virtual address

[Nicholas Piggin]

Michael Ellerman's on February 5, 2019 9:31 pm:
> From: Christophe Leroy <christophe.leroy@c-s.fr>
> 
> Since only the virtual address of allocated blocks is used,
> lets use functions returning directly virtual address.
> 
> Those functions have the advantage of also zeroing the block.
> 
> Suggested-by: Mike Rapoport <rppt@linux.ibm.com>
> Acked-by: Mike Rapoport <rppt@linux.ibm.com>
> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
> ---
>  arch/powerpc/kernel/irq.c      |  5 -----
>  arch/powerpc/kernel/setup_32.c | 26 ++++++++++++++++----------
>  arch/powerpc/kernel/setup_64.c | 19 +++++++------------
>  3 files changed, 23 insertions(+), 27 deletions(-)
> 
> diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
> index bb299613a462..4a5dd8800946 100644
> --- a/arch/powerpc/kernel/irq.c
> +++ b/arch/powerpc/kernel/irq.c
> @@ -725,18 +725,15 @@ void exc_lvl_ctx_init(void)
>  #endif
>  #endif
>  
> -		memset((void *)critirq_ctx[cpu_nr], 0, THREAD_SIZE);
>  		tp = critirq_ctx[cpu_nr];
>  		tp->cpu = cpu_nr;
>  		tp->preempt_count = 0;
>  
>  #ifdef CONFIG_BOOKE
> -		memset((void *)dbgirq_ctx[cpu_nr], 0, THREAD_SIZE);
>  		tp = dbgirq_ctx[cpu_nr];
>  		tp->cpu = cpu_nr;
>  		tp->preempt_count = 0;
>  
> -		memset((void *)mcheckirq_ctx[cpu_nr], 0, THREAD_SIZE);
>  		tp = mcheckirq_ctx[cpu_nr];
>  		tp->cpu = cpu_nr;
>  		tp->preempt_count = HARDIRQ_OFFSET;
> @@ -754,12 +751,10 @@ void irq_ctx_init(void)
>  	int i;
>  
>  	for_each_possible_cpu(i) {
> -		memset((void *)softirq_ctx[i], 0, THREAD_SIZE);
>  		tp = softirq_ctx[i];
>  		tp->cpu = i;
>  		klp_init_thread_info(tp);
>  
> -		memset((void *)hardirq_ctx[i], 0, THREAD_SIZE);
>  		tp = hardirq_ctx[i];
>  		tp->cpu = i;
>  		klp_init_thread_info(tp);
> diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
> index 947f904688b0..1f0b7629c1a6 100644
> --- a/arch/powerpc/kernel/setup_32.c
> +++ b/arch/powerpc/kernel/setup_32.c
> @@ -196,6 +196,17 @@ static int __init ppc_init(void)
>  }
>  arch_initcall(ppc_init);
>  
> +static void *__init alloc_stack(void)
> +{
> +	void *ptr = memblock_alloc(THREAD_SIZE, THREAD_SIZE);
> +
> +	if (!ptr)
> +		panic("cannot allocate %d bytes for stack at %pS\n",
> +		      THREAD_SIZE, (void *)_RET_IP_);
> +
> +	return ptr;
> +}
> +
>  void __init irqstack_early_init(void)
>  {
>  	unsigned int i;
> @@ -203,10 +214,8 @@ void __init irqstack_early_init(void)
>  	/* interrupt stacks must be in lowmem, we get that for free on ppc32
>  	 * as the memblock is limited to lowmem by default */
>  	for_each_possible_cpu(i) {
> -		softirq_ctx[i] = (struct thread_info *)
> -			__va(memblock_phys_alloc(THREAD_SIZE, THREAD_SIZE));
> -		hardirq_ctx[i] = (struct thread_info *)
> -			__va(memblock_phys_alloc(THREAD_SIZE, THREAD_SIZE));
> +		softirq_ctx[i] = alloc_stack();
> +		hardirq_ctx[i] = alloc_stack();
>  	}
>  }
>  
> @@ -224,13 +233,10 @@ void __init exc_lvl_early_init(void)
>  		hw_cpu = 0;
>  #endif
>  
> -		critirq_ctx[hw_cpu] = (struct thread_info *)
> -			__va(memblock_phys_alloc(THREAD_SIZE, THREAD_SIZE));
> +		critirq_ctx[hw_cpu] = alloc_stack();
>  #ifdef CONFIG_BOOKE
> -		dbgirq_ctx[hw_cpu] = (struct thread_info *)
> -			__va(memblock_phys_alloc(THREAD_SIZE, THREAD_SIZE));
> -		mcheckirq_ctx[hw_cpu] = (struct thread_info *)
> -			__va(memblock_phys_alloc(THREAD_SIZE, THREAD_SIZE));
> +		dbgirq_ctx[hw_cpu] = alloc_stack();
> +		mcheckirq_ctx[hw_cpu] = alloc_stack();
>  #endif
>  	}
>  }
> diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
> index 236c1151a3a7..080dd515d587 100644
> --- a/arch/powerpc/kernel/setup_64.c
> +++ b/arch/powerpc/kernel/setup_64.c
> @@ -634,19 +634,17 @@ __init u64 ppc64_bolted_size(void)
>  
>  static void *__init alloc_stack(unsigned long limit, int cpu)
>  {
> -	unsigned long pa;
> +	void *ptr;
>  
>  	BUILD_BUG_ON(STACK_INT_FRAME_SIZE % 16);
>  
> -	pa = memblock_alloc_base_nid(THREAD_SIZE, THREAD_SIZE, limit,
> -					early_cpu_to_node(cpu), MEMBLOCK_NONE);
> -	if (!pa) {
> -		pa = memblock_alloc_base(THREAD_SIZE, THREAD_SIZE, limit);
> -		if (!pa)
> -			panic("cannot allocate stacks");
> -	}
> +	ptr = memblock_alloc_try_nid(THREAD_SIZE, THREAD_SIZE,
> +				     MEMBLOCK_LOW_LIMIT, limit,
> +				     early_cpu_to_node(cpu));

This is much nicer. Looks like removing MEMBLOCK_LOW_LIMIT would be a 
cleanup for generic kernel code. Actually some of these calls are used
only by powerpc (memblock_alloc_base_nid) which probably could get
tidied up. Something for a rainy day or a beginner.

Reviewed-by: Nicholas Piggin <npiggin@gmail.com>

Re: [PATCH v16 05/21] powerpc: prep stack walkers for THREAD_INFO_IN_TASK

[Nicholas Piggin]

Michael Ellerman's on February 5, 2019 9:32 pm:
> From: Christophe Leroy <christophe.leroy@c-s.fr>
> 
> [text copied from commit 9bbd4c56b0b6
> ("arm64: prep stack walkers for THREAD_INFO_IN_TASK")]
> 
> When CONFIG_THREAD_INFO_IN_TASK is selected, task stacks may be freed
> before a task is destroyed. To account for this, the stacks are
> refcounted, and when manipulating the stack of another task, it is
> necessary to get/put the stack to ensure it isn't freed and/or re-used
> while we do so.
> 
> This patch reworks the powerpc stack walking code to account for this.
> When CONFIG_THREAD_INFO_IN_TASK is not selected these perform no
> refcounting, and this should only be a structural change that does not
> affect behaviour.
> 
> Acked-by: Mark Rutland <mark.rutland@arm.com>
> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Seems to do what is advertised and asked for by the CONFIG option. I 
don't see any other code that uses non-current stack.

Acked-by: Nicholas Piggin <npiggin@gmail.com>

Re: [PATCH v16 14/21] powerpc: Use task_stack_page() in current_pt_regs()

[Nicholas Piggin]

Michael Ellerman's on February 5, 2019 9:32 pm:
> From: Christophe Leroy <christophe.leroy@c-s.fr>
> 
> Change current_pt_regs() to use task_stack_page() rather than
> current_thread_info() so that it keeps working once we enable
> THREAD_INFO_IN_TASK.
> 
> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
> [mpe: Split out of large patch]
> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Reviewed-by: Nicholas Piggin <npiggin@gmail.com>

Re: [PATCH v16 20/21] powerpc/64: Replace CURRENT_THREAD_INFO with PACA_CURRENT_TI

[Nicholas Piggin]

Michael Ellerman's on February 5, 2019 9:32 pm:
> From: Christophe Leroy <christophe.leroy@c-s.fr>
> 
> Now that current_thread_info is located at the beginning of 'current'
> task struct, CURRENT_THREAD_INFO macro is not really needed any more.
> 
> This patch replaces it by loads of the value at PACA_CURRENT_TI(r13).
> 
> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
> [mpe: Add PACA_CURRENT_TI rather than using PACACURRENT]

Okay. Does it need to be CURRENT_TI not just TI (or THREAD_INFO may be 
more descriptive)? TI/THREAD_INFO implies the current one I think.

Reviewed-by: Nicholas Piggin <npiggin@gmail.com>

Re: [PATCH v16 19/21] powerpc/32: Remove CURRENT_THREAD_INFO and rename TI_CPU

[Nicholas Piggin]

Michael Ellerman's on February 5, 2019 9:32 pm:
> From: Christophe Leroy <christophe.leroy@c-s.fr>
> 
> Now that thread_info is similar to task_struct, its address is in r2
> so CURRENT_THREAD_INFO() macro is useless. This patch removes it.

You wouldn't want to keep CURRENT_THREAD_INFO(r2) to mean get the thread 
info out of current, as just a no-op for documentation purpose? I don't 
know /32 code at all so it's up to you.

> This patch also moves the 'tovirt(r2, r2)' down just before the
> reactivation of MMU translation, so that we keep the physical address
> of 'current' in r2 until then. It avoids a few calls to tophys().
> 
> At the same time, as the 'cpu' field is not anymore in thread_info,
> TI_CPU is renamed TASK_CPU by this patch.
> 
> It also allows to get rid of a couple of
> '#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE' as ACCOUNT_CPU_USER_ENTRY()
> and ACCOUNT_CPU_USER_EXIT() are empty when
> CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not defined.

May want to split these a little more?

Re: [PATCH v16 19/21] powerpc/32: Remove CURRENT_THREAD_INFO and rename TI_CPU

[Nicholas Piggin]

Nicholas Piggin's on February 7, 2019 2:27 pm:
> Michael Ellerman's on February 5, 2019 9:32 pm:
>> From: Christophe Leroy <christophe.leroy@c-s.fr>
>> 
>> Now that thread_info is similar to task_struct, its address is in r2
>> so CURRENT_THREAD_INFO() macro is useless. This patch removes it.
> 
> You wouldn't want to keep CURRENT_THREAD_INFO(r2) to mean get the thread 
> info out of current, as just a no-op for documentation purpose? I don't 
> know /32 code at all so it's up to you.

I see that I said roughly the opposite last year, if that helps to 
determine the importance of my opinion.

Thanks,
Nick

Re: [PATCH v16 16/21] powerpc: Activate CONFIG_THREAD_INFO_IN_TASK

[Nicholas Piggin]

Michael Ellerman's on February 5, 2019 9:32 pm:
> From: Christophe Leroy <christophe.leroy@c-s.fr>
> 
> This patch activates CONFIG_THREAD_INFO_IN_TASK which
> moves the thread_info into task_struct.
> 
> Moving thread_info into task_struct has the following advantages:
>   - It protects thread_info from corruption in the case of stack
>     overflows.
>   - Its address is harder to determine if stack addresses are leaked,
>     making a number of attacks more difficult.
> 
> This has the following consequences:
>   - thread_info is now located at the beginning of task_struct.
>   - The 'cpu' field is now in task_struct, and only exists when
>     CONFIG_SMP is active.
>   - thread_info doesn't have anymore the 'task' field.
> 
> This patch:
>   - Removes all recopy of thread_info struct when the stack changes.
>   - Changes the CURRENT_THREAD_INFO() macro to point to current.
>   - Selects CONFIG_THREAD_INFO_IN_TASK.
>   - Modifies raw_smp_processor_id() to get ->cpu from current without
>     including linux/sched.h to avoid circular inclusion and without
>     including asm/asm-offsets.h to avoid symbol names duplication
>     between ASM constants and C constants.
>   - Modifies klp_init_thread_info() to take a task_struct pointer
>     argument.
> 
> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
> Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
> [mpe: Add task_stack.h to livepatch.h to fix build fails]
> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
> ---

Nothing stands out here since my last review that I can see. 
raw_smp_processor_id change is for 32-bit only, of course.

Thanks,
Nick

Re: [PATCH v16 16/21] powerpc: Activate CONFIG_THREAD_INFO_IN_TASK

[Nicholas Piggin]

Michael Ellerman's on February 5, 2019 9:32 pm:
> From: Christophe Leroy <christophe.leroy@c-s.fr>
> 
> This patch activates CONFIG_THREAD_INFO_IN_TASK which
> moves the thread_info into task_struct.
> 
> Moving thread_info into task_struct has the following advantages:
>   - It protects thread_info from corruption in the case of stack
>     overflows.
>   - Its address is harder to determine if stack addresses are leaked,
>     making a number of attacks more difficult.
> 
> This has the following consequences:
>   - thread_info is now located at the beginning of task_struct.
>   - The 'cpu' field is now in task_struct, and only exists when
>     CONFIG_SMP is active.
>   - thread_info doesn't have anymore the 'task' field.
> 
> This patch:
>   - Removes all recopy of thread_info struct when the stack changes.
>   - Changes the CURRENT_THREAD_INFO() macro to point to current.
>   - Selects CONFIG_THREAD_INFO_IN_TASK.
>   - Modifies raw_smp_processor_id() to get ->cpu from current without
>     including linux/sched.h to avoid circular inclusion and without
>     including asm/asm-offsets.h to avoid symbol names duplication
>     between ASM constants and C constants.

Come to think of it, can this patch be split out entirely and moved
earlier as a 32-bit patch? 64-bit does not require that change or the 
additional build step AFAIKS?

Thanks,
Nick

Re: [PATCH v16 16/21] powerpc: Activate CONFIG_THREAD_INFO_IN_TASK

[Christophe Leroy]

Le 07/02/2019 à 05:53, Nicholas Piggin a écrit :
> Michael Ellerman's on February 5, 2019 9:32 pm:
>> From: Christophe Leroy <christophe.leroy@c-s.fr>
>>
>> This patch activates CONFIG_THREAD_INFO_IN_TASK which
>> moves the thread_info into task_struct.
>>
>> Moving thread_info into task_struct has the following advantages:
>>    - It protects thread_info from corruption in the case of stack
>>      overflows.
>>    - Its address is harder to determine if stack addresses are leaked,
>>      making a number of attacks more difficult.
>>
>> This has the following consequences:
>>    - thread_info is now located at the beginning of task_struct.
>>    - The 'cpu' field is now in task_struct, and only exists when
>>      CONFIG_SMP is active.
>>    - thread_info doesn't have anymore the 'task' field.
>>
>> This patch:
>>    - Removes all recopy of thread_info struct when the stack changes.
>>    - Changes the CURRENT_THREAD_INFO() macro to point to current.
>>    - Selects CONFIG_THREAD_INFO_IN_TASK.
>>    - Modifies raw_smp_processor_id() to get ->cpu from current without
>>      including linux/sched.h to avoid circular inclusion and without
>>      including asm/asm-offsets.h to avoid symbol names duplication
>>      between ASM constants and C constants.
> 
> Come to think of it, can this patch be split out entirely and moved
> earlier as a 32-bit patch? 64-bit does not require that change or the
> additional build step AFAIKS?

Euh ... we may do that but the change in smp.h cannot go as is until 
thread_info is moved into current. So it would mean only having the 
Makefile change and the GENERATING_ASM_OFFSETS define in asm-offsets.c, 
and eventually an intermediate version of raw_smp_processor_id() in 
smp.h, that would have to get modified in the activation patch anyway.

So I'm not sure this is really worth it.

Christophe

Re: [PATCH v16 05/21] powerpc: prep stack walkers for THREAD_INFO_IN_TASK

[Michael Ellerman]

Michael Ellerman <mpe@ellerman.id.au> writes:
> diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
> index ce393df243aa..4ffbb677c9f5 100644
> --- a/arch/powerpc/kernel/process.c
> +++ b/arch/powerpc/kernel/process.c
> @@ -2067,6 +2081,9 @@ void show_stack(struct task_struct *tsk, unsigned long *stack)
>  	int curr_frame = 0;
>  #endif
>  
> +	if (!try_get_task_stack(tsk))
> +		return;

This needs to be after the NULL check below:

>  	sp = (unsigned long) stack;
>  	if (tsk == NULL)
>  		tsk = current;


Otherwise show_stack(NULL, NULL) blows up :)

I've changed it to:

	if (tsk == NULL)
		tsk = current;

	if (!try_get_task_stack(tsk))
		return;

	sp = (unsigned long) stack;
	if (sp == 0) {
        	...


cheers

Re: [v16, 01/21] powerpc/irq: use memblock functions returning virtual address

[Michael Ellerman]

On Tue, 2019-02-05 at 11:31:59 UTC, Michael Ellerman wrote:
> From: Christophe Leroy <christophe.leroy@c-s.fr>
> 
> Since only the virtual address of allocated blocks is used,
> lets use functions returning directly virtual address.
> 
> Those functions have the advantage of also zeroing the block.
> 
> Suggested-by: Mike Rapoport <rppt@linux.ibm.com>
> Acked-by: Mike Rapoport <rppt@linux.ibm.com>
> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
> Reviewed-by: Nicholas Piggin <npiggin@gmail.com>

Series applied to powerpc next, thanks.

https://git.kernel.org/powerpc/c/c8e409a33cf8df5060064a70df3e1350

cheers