LinuxPPC-Dev Archive on lore.kernel.org
 help / Atom feed
* [PATCH v3 1/7] dump_stack: Support adding to the dump stack arch description
@ 2019-02-07 12:46 Michael Ellerman
  2019-02-07 12:46 ` [PATCH v3 2/7] powerpc: Add PVR & CPU name to " Michael Ellerman
                   ` (8 more replies)
  0 siblings, 9 replies; 16+ messages in thread
From: Michael Ellerman @ 2019-02-07 12:46 UTC (permalink / raw)
  To: linuxppc-dev
  Cc: linux-arch, pmladek, linux-kernel, sergey.senozhatsky, tj, akpm, dyoung

Arch code can set a "dump stack arch description string" which is
displayed with oops output to describe the hardware platform.

It is useful to initialise this as early as possible, so that an early
oops will have the hardware description.

However in practice we discover the hardware platform in stages, so it
would be useful to be able to incrementally fill in the hardware
description as we discover it.

This patch adds that ability, by creating dump_stack_add_arch_desc().

If there is no existing string it behaves exactly like
dump_stack_set_arch_desc(). However if there is an existing string it
appends to it, with a leading space.

This makes it easy to call it multiple times from different parts of the
code and get a reasonable looking result.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 include/linux/printk.h |  5 ++++
 lib/dump_stack.c       | 58 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 63 insertions(+)

v3: No change, just widened Cc list.

v2: Add a smp_wmb() and comment.

v1 is here for reference https://lore.kernel.org/lkml/1430824337-15339-1-git-send-email-mpe@ellerman.id.au/

I'll take this series via the powerpc tree if no one minds?


diff --git a/include/linux/printk.h b/include/linux/printk.h
index 77740a506ebb..d5fb4f960271 100644
--- a/include/linux/printk.h
+++ b/include/linux/printk.h
@@ -198,6 +198,7 @@ u32 log_buf_len_get(void);
 void log_buf_vmcoreinfo_setup(void);
 void __init setup_log_buf(int early);
 __printf(1, 2) void dump_stack_set_arch_desc(const char *fmt, ...);
+__printf(1, 2) void dump_stack_add_arch_desc(const char *fmt, ...);
 void dump_stack_print_info(const char *log_lvl);
 void show_regs_print_info(const char *log_lvl);
 extern asmlinkage void dump_stack(void) __cold;
@@ -256,6 +257,10 @@ static inline __printf(1, 2) void dump_stack_set_arch_desc(const char *fmt, ...)
 {
 }
 
+static inline __printf(1, 2) void dump_stack_add_arch_desc(const char *fmt, ...)
+{
+}
+
 static inline void dump_stack_print_info(const char *log_lvl)
 {
 }
diff --git a/lib/dump_stack.c b/lib/dump_stack.c
index 5cff72f18c4a..69b710ff92b5 100644
--- a/lib/dump_stack.c
+++ b/lib/dump_stack.c
@@ -35,6 +35,64 @@ void __init dump_stack_set_arch_desc(const char *fmt, ...)
 	va_end(args);
 }
 
+/**
+ * dump_stack_add_arch_desc - add arch-specific info to show with task dumps
+ * @fmt: printf-style format string
+ * @...: arguments for the format string
+ *
+ * See dump_stack_set_arch_desc() for why you'd want to use this.
+ *
+ * This version adds to any existing string already created with either
+ * dump_stack_set_arch_desc() or dump_stack_add_arch_desc(). If there is an
+ * existing string a space will be prepended to the passed string.
+ */
+void __init dump_stack_add_arch_desc(const char *fmt, ...)
+{
+	va_list args;
+	int pos, len;
+	char *p;
+
+	/*
+	 * If there's an existing string we snprintf() past the end of it, and
+	 * then turn the terminating NULL of the existing string into a space
+	 * to create one string separated by a space.
+	 *
+	 * If there's no existing string we just snprintf() to the buffer, like
+	 * dump_stack_set_arch_desc(), but without calling it because we'd need
+	 * a varargs version.
+	 */
+	len = strnlen(dump_stack_arch_desc_str, sizeof(dump_stack_arch_desc_str));
+	pos = len;
+
+	if (len)
+		pos++;
+
+	if (pos >= sizeof(dump_stack_arch_desc_str))
+		return; /* Ran out of space */
+
+	p = &dump_stack_arch_desc_str[pos];
+
+	va_start(args, fmt);
+	vsnprintf(p, sizeof(dump_stack_arch_desc_str) - pos, fmt, args);
+	va_end(args);
+
+	if (len) {
+		/*
+		 * Order the stores above in vsnprintf() vs the store of the
+		 * space below which joins the two strings. Note this doesn't
+		 * make the code truly race free because there is no barrier on
+		 * the read side. ie. Another CPU might load the uninitialised
+		 * tail of the buffer first and then the space below (rather
+		 * than the NULL that was there previously), and so print the
+		 * uninitialised tail. But the whole string lives in BSS so in
+		 * practice it should just see NULLs.
+		 */
+		smp_wmb();
+
+		dump_stack_arch_desc_str[len] = ' ';
+	}
+}
+
 /**
  * dump_stack_print_info - print generic debug info for dump_stack()
  * @log_lvl: log level
-- 
2.20.1


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v3 2/7] powerpc: Add PVR & CPU name to dump stack arch description
  2019-02-07 12:46 [PATCH v3 1/7] dump_stack: Support adding to the dump stack arch description Michael Ellerman
@ 2019-02-07 12:46 ` " Michael Ellerman
  2019-02-07 12:46 ` [PATCH v3 3/7] powerpc/64: Add logical PVR to the " Michael Ellerman
                   ` (7 subsequent siblings)
  8 siblings, 0 replies; 16+ messages in thread
From: Michael Ellerman @ 2019-02-07 12:46 UTC (permalink / raw)
  To: linuxppc-dev
  Cc: linux-arch, pmladek, linux-kernel, sergey.senozhatsky, tj, akpm, dyoung

As soon as we've done some basic setup, add the PVR and CPU name to
the dump stack arch description, which is printed in case of an oops.

eg: Hardware name: ... POWER8E (raw) pvr:0x4b0201

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/cputable.c | 1 +
 arch/powerpc/kernel/prom.c     | 4 ++++
 2 files changed, 5 insertions(+)

diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 1eab54bc6ee9..8b4520a84612 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/export.h>
 #include <linux/jump_label.h>
+#include <linux/printk.h>
 
 #include <asm/oprofile_impl.h>
 #include <asm/cputable.h>
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 4181ec715f88..ea2c3498067d 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -761,6 +761,10 @@ void __init early_init_devtree(void *params)
 
 	dt_cpu_ftrs_scan();
 
+	/* We can now set the CPU name & PVR for the oops output */
+	dump_stack_add_arch_desc("%s pvr:0x%04lx", cur_cpu_spec->cpu_name,
+				 mfspr(SPRN_PVR));
+
 	/* Retrieve CPU related informations from the flat tree
 	 * (altivec support, boot CPU ID, ...)
 	 */
-- 
2.20.1


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v3 3/7] powerpc/64: Add logical PVR to the dump stack arch description
  2019-02-07 12:46 [PATCH v3 1/7] dump_stack: Support adding to the dump stack arch description Michael Ellerman
  2019-02-07 12:46 ` [PATCH v3 2/7] powerpc: Add PVR & CPU name to " Michael Ellerman
@ 2019-02-07 12:46 ` " Michael Ellerman
  2019-02-07 12:46 ` [PATCH v3 4/7] powerpc: Add device-tree model to " Michael Ellerman
                   ` (6 subsequent siblings)
  8 siblings, 0 replies; 16+ messages in thread
From: Michael Ellerman @ 2019-02-07 12:46 UTC (permalink / raw)
  To: linuxppc-dev
  Cc: linux-arch, pmladek, linux-kernel, sergey.senozhatsky, tj, akpm, dyoung

If we detect a logical PVR add that to the dump stack arch
description, which is printed in case of an oops.

eg: Hardware name: ... lpvr:0xf000004

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/prom.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index ea2c3498067d..38a90097469a 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -371,8 +371,10 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
 	 */
 	if (!dt_cpu_ftrs_in_use()) {
 		prop = of_get_flat_dt_prop(node, "cpu-version", NULL);
-		if (prop && (be32_to_cpup(prop) & 0xff000000) == 0x0f000000)
+		if (prop && (be32_to_cpup(prop) & 0xff000000) == 0x0f000000) {
 			identify_cpu(0, be32_to_cpup(prop));
+			dump_stack_add_arch_desc("lpvr:0x%04x", be32_to_cpup(prop));
+		}
 
 		check_cpu_feature_properties(node);
 		check_cpu_pa_features(node);
-- 
2.20.1


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v3 4/7] powerpc: Add device-tree model to dump stack arch description
  2019-02-07 12:46 [PATCH v3 1/7] dump_stack: Support adding to the dump stack arch description Michael Ellerman
  2019-02-07 12:46 ` [PATCH v3 2/7] powerpc: Add PVR & CPU name to " Michael Ellerman
  2019-02-07 12:46 ` [PATCH v3 3/7] powerpc/64: Add logical PVR to the " Michael Ellerman
@ 2019-02-07 12:46 ` " Michael Ellerman
  2019-02-07 12:46 ` [PATCH v3 5/7] powerpc: Add ppc_md.name " Michael Ellerman
                   ` (5 subsequent siblings)
  8 siblings, 0 replies; 16+ messages in thread
From: Michael Ellerman @ 2019-02-07 12:46 UTC (permalink / raw)
  To: linuxppc-dev
  Cc: linux-arch, pmladek, linux-kernel, sergey.senozhatsky, tj, akpm, dyoung

As soon as we know the model of the machine we're on, add it to the
dump stack arch description, which is printed in case of an oops.

eg: Hardware name: model:'IBM,8247-22L'

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/prom.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 38a90097469a..70af26a1eedd 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -34,6 +34,7 @@
 #include <linux/of_fdt.h>
 #include <linux/libfdt.h>
 #include <linux/cpu.h>
+#include <linux/printk.h>
 
 #include <asm/prom.h>
 #include <asm/rtas.h>
@@ -687,6 +688,23 @@ static void __init tm_init(void)
 static void tm_init(void) { }
 #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
 
+static int __init
+early_init_dt_scan_model(unsigned long node, const char *uname,
+			 int depth, void *data)
+{
+	const char *prop;
+
+	if (depth != 0)
+		return 0;
+
+	prop = of_get_flat_dt_prop(node, "model", NULL);
+	if (prop)
+		dump_stack_add_arch_desc("model:'%s'", prop);
+
+	/* break now */
+	return 1;
+}
+
 void __init early_init_devtree(void *params)
 {
 	phys_addr_t limit;
@@ -697,6 +715,8 @@ void __init early_init_devtree(void *params)
 	if (!early_init_dt_verify(params))
 		panic("BUG: Failed verifying flat device tree, bad version?");
 
+	of_scan_flat_dt(early_init_dt_scan_model, NULL);
+
 #ifdef CONFIG_PPC_RTAS
 	/* Some machines might need RTAS info for debugging, grab it now. */
 	of_scan_flat_dt(early_init_dt_scan_rtas, NULL);
-- 
2.20.1


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v3 5/7] powerpc: Add ppc_md.name to dump stack arch description
  2019-02-07 12:46 [PATCH v3 1/7] dump_stack: Support adding to the dump stack arch description Michael Ellerman
                   ` (2 preceding siblings ...)
  2019-02-07 12:46 ` [PATCH v3 4/7] powerpc: Add device-tree model to " Michael Ellerman
@ 2019-02-07 12:46 ` " Michael Ellerman
  2019-02-07 12:46 ` [PATCH v3 6/7] powerpc/powernv: Add opal details " Michael Ellerman
                   ` (4 subsequent siblings)
  8 siblings, 0 replies; 16+ messages in thread
From: Michael Ellerman @ 2019-02-07 12:46 UTC (permalink / raw)
  To: linuxppc-dev
  Cc: linux-arch, pmladek, linux-kernel, sergey.senozhatsky, tj, akpm, dyoung

As soon as we know the name of the machine description we're using, add
it to the dump stack arch description, which is printed in case of an
oops.

eg: Hardware name: ... machine:pSeries

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/setup-common.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index ca00fbb97cf8..00d900b1e584 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -21,6 +21,7 @@
 #include <linux/delay.h>
 #include <linux/initrd.h>
 #include <linux/platform_device.h>
+#include <linux/printk.h>
 #include <linux/seq_file.h>
 #include <linux/ioport.h>
 #include <linux/console.h>
@@ -638,6 +639,8 @@ void probe_machine(void)
 		for (;;);
 	}
 
+	dump_stack_add_arch_desc("machine:%s", ppc_md.name);
+
 	printk(KERN_INFO "Using %s machine description\n", ppc_md.name);
 }
 
-- 
2.20.1


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v3 6/7] powerpc/powernv: Add opal details to dump stack arch description
  2019-02-07 12:46 [PATCH v3 1/7] dump_stack: Support adding to the dump stack arch description Michael Ellerman
                   ` (3 preceding siblings ...)
  2019-02-07 12:46 ` [PATCH v3 5/7] powerpc: Add ppc_md.name " Michael Ellerman
@ 2019-02-07 12:46 ` " Michael Ellerman
  2019-02-07 12:46 ` [PATCH v3 7/7] powerpc/pseries: Add firmware " Michael Ellerman
                   ` (3 subsequent siblings)
  8 siblings, 0 replies; 16+ messages in thread
From: Michael Ellerman @ 2019-02-07 12:46 UTC (permalink / raw)
  To: linuxppc-dev
  Cc: linux-arch, pmladek, linux-kernel, sergey.senozhatsky, tj, akpm, dyoung

Once we have unflattened the device tree we can easily grab these opal
version details and add them to dump stack arch description, which is
printed in case of an oops.

eg: Hardware name: ... opal:v6.2

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/platforms/powernv/setup.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
index 14befee4b3f1..1bfb422436fb 100644
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -156,8 +156,33 @@ static void __init pnv_setup_arch(void)
 	/* XXX PMCS */
 }
 
+static void __init pnv_add_dump_stack_arch_desc(void)
+{
+	struct device_node *dn;
+	const char *version;
+
+	dn = of_find_node_by_path("/ibm,opal/firmware");
+	if (!dn)
+		return;
+
+	version = of_get_property(dn, "version", NULL);
+	if (!version)
+		version = of_get_property(dn, "git-id", NULL);
+
+	if (version)
+		dump_stack_add_arch_desc("opal:%s", version);
+
+	version = of_get_property(dn, "mi-version", NULL);
+	if (version)
+		dump_stack_add_arch_desc("mi:%s", version);
+
+	of_node_put(dn);
+}
+
 static void __init pnv_init(void)
 {
+	pnv_add_dump_stack_arch_desc();
+
 	/*
 	 * Initialize the LPC bus now so that legacy serial
 	 * ports can be found on it
-- 
2.20.1


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v3 7/7] powerpc/pseries: Add firmware details to dump stack arch description
  2019-02-07 12:46 [PATCH v3 1/7] dump_stack: Support adding to the dump stack arch description Michael Ellerman
                   ` (4 preceding siblings ...)
  2019-02-07 12:46 ` [PATCH v3 6/7] powerpc/powernv: Add opal details " Michael Ellerman
@ 2019-02-07 12:46 ` " Michael Ellerman
  2019-02-08  2:01 ` [PATCH v3 1/7] dump_stack: Support adding to the " Sergey Senozhatsky
                   ` (2 subsequent siblings)
  8 siblings, 0 replies; 16+ messages in thread
From: Michael Ellerman @ 2019-02-07 12:46 UTC (permalink / raw)
  To: linuxppc-dev
  Cc: linux-arch, pmladek, linux-kernel, sergey.senozhatsky, tj, akpm, dyoung

Once we have unflattened the device tree we can easily grab these
firmware version details and add them to dump stack arch description,
which is printed in case of an oops.

Currently /hypervisor only exists on KVM, so if we don't find that look
for something that suggests we're on phyp and if so that's probably a
good guess. The actual content of the ibm,fw-net-version seems to be
a full path so is too long to add to the description.

Hardware name: ... of:'IBM,FW860.42 (SV860_138)' hv:phyp

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/platforms/pseries/setup.c | 35 ++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 41f62ca27c63..dfb084f5a573 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -923,6 +923,39 @@ static void pSeries_cmo_feature_init(void)
 	pr_debug(" <- fw_cmo_feature_init()\n");
 }
 
+static void __init pseries_add_dump_stack_arch_desc(void)
+{
+	struct device_node *dn;
+	const char *prop;
+
+	dn = of_find_node_by_path("/openprom");
+	if (dn) {
+		prop = of_get_property(dn, "model", NULL);
+		if (prop)
+			dump_stack_add_arch_desc("of:'%s'", prop);
+
+		of_node_put(dn);
+	}
+
+	dn = of_find_node_by_path("/hypervisor");
+	if (dn) {
+		prop = of_get_property(dn, "compatible", NULL);
+		if (prop)
+			dump_stack_add_arch_desc("hv:%s", prop);
+
+		of_node_put(dn);
+	} else {
+		dn = of_find_node_by_path("/");
+		if (dn) {
+			prop = of_get_property(dn, "ibm,fw-net-version", NULL);
+			if (prop)
+				dump_stack_add_arch_desc("hv:phyp");
+
+			of_node_put(dn);
+		}
+	}
+}
+
 /*
  * Early initialization.  Relocation is on but do not reference unbolted pages
  */
@@ -930,6 +963,8 @@ static void __init pseries_init(void)
 {
 	pr_debug(" -> pseries_init()\n");
 
+	pseries_add_dump_stack_arch_desc();
+
 #ifdef CONFIG_HVC_CONSOLE
 	if (firmware_has_feature(FW_FEATURE_LPAR))
 		hvc_vio_init_early();
-- 
2.20.1


^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v3 1/7] dump_stack: Support adding to the dump stack arch description
  2019-02-07 12:46 [PATCH v3 1/7] dump_stack: Support adding to the dump stack arch description Michael Ellerman
                   ` (5 preceding siblings ...)
  2019-02-07 12:46 ` [PATCH v3 7/7] powerpc/pseries: Add firmware " Michael Ellerman
@ 2019-02-08  2:01 ` " Sergey Senozhatsky
  2019-02-08 18:55 ` Steven Rostedt
  2019-02-11 12:50 ` Andrea Parri
  8 siblings, 0 replies; 16+ messages in thread
From: Sergey Senozhatsky @ 2019-02-08  2:01 UTC (permalink / raw)
  To: Michael Ellerman
  Cc: linux-arch, pmladek, sergey.senozhatsky, linux-kernel,
	Steven Rostedt, linuxppc-dev, tj, akpm, dyoung

Cc-ing Steven

  https://lore.kernel.org/lkml/20190207124635.3885-1-mpe@ellerman.id.au/T/#u

On (02/07/19 23:46), Michael Ellerman wrote:
> Arch code can set a "dump stack arch description string" which is
> displayed with oops output to describe the hardware platform.
> 
> It is useful to initialise this as early as possible, so that an early
> oops will have the hardware description.
> 
> However in practice we discover the hardware platform in stages, so it
> would be useful to be able to incrementally fill in the hardware
> description as we discover it.
> 
> This patch adds that ability, by creating dump_stack_add_arch_desc().
> 
> If there is no existing string it behaves exactly like
> dump_stack_set_arch_desc(). However if there is an existing string it
> appends to it, with a leading space.
> 
> This makes it easy to call it multiple times from different parts of the
> code and get a reasonable looking result.
> 
> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

You probably can have a __init buffer somewhere in ppc code, append
data to it, step by step, and call dump_stack_set_arch_desc() all
the time.

But no real objections; dump_stack_add_arch_desc() can do.

FWIW,
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>

	-ss

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v3 1/7] dump_stack: Support adding to the dump stack arch description
  2019-02-07 12:46 [PATCH v3 1/7] dump_stack: Support adding to the dump stack arch description Michael Ellerman
                   ` (6 preceding siblings ...)
  2019-02-08  2:01 ` [PATCH v3 1/7] dump_stack: Support adding to the " Sergey Senozhatsky
@ 2019-02-08 18:55 ` Steven Rostedt
  2019-02-11  7:55   ` Sergey Senozhatsky
  2019-02-11 12:50 ` Andrea Parri
  8 siblings, 1 reply; 16+ messages in thread
From: Steven Rostedt @ 2019-02-08 18:55 UTC (permalink / raw)
  To: Michael Ellerman
  Cc: linux-arch, pmladek, sergey.senozhatsky, linux-kernel,
	linuxppc-dev, tj, akpm, dyoung

On Thu, Feb 07, 2019 at 11:46:29PM +1100, Michael Ellerman wrote:
> 
> diff --git a/include/linux/printk.h b/include/linux/printk.h
> index 77740a506ebb..d5fb4f960271 100644
> --- a/include/linux/printk.h
> +++ b/include/linux/printk.h
> @@ -198,6 +198,7 @@ u32 log_buf_len_get(void);
>  void log_buf_vmcoreinfo_setup(void);
>  void __init setup_log_buf(int early);
>  __printf(1, 2) void dump_stack_set_arch_desc(const char *fmt, ...);
> +__printf(1, 2) void dump_stack_add_arch_desc(const char *fmt, ...);
>  void dump_stack_print_info(const char *log_lvl);
>  void show_regs_print_info(const char *log_lvl);
>  extern asmlinkage void dump_stack(void) __cold;
> @@ -256,6 +257,10 @@ static inline __printf(1, 2) void dump_stack_set_arch_desc(const char *fmt, ...)
>  {
>  }
>  
> +static inline __printf(1, 2) void dump_stack_add_arch_desc(const char *fmt, ...)
> +{
> +}
> +
>  static inline void dump_stack_print_info(const char *log_lvl)
>  {
>  }
> diff --git a/lib/dump_stack.c b/lib/dump_stack.c
> index 5cff72f18c4a..69b710ff92b5 100644
> --- a/lib/dump_stack.c
> +++ b/lib/dump_stack.c
> @@ -35,6 +35,64 @@ void __init dump_stack_set_arch_desc(const char *fmt, ...)
>  	va_end(args);
>  }
>  
> +/**
> + * dump_stack_add_arch_desc - add arch-specific info to show with task dumps
> + * @fmt: printf-style format string
> + * @...: arguments for the format string
> + *
> + * See dump_stack_set_arch_desc() for why you'd want to use this.
> + *
> + * This version adds to any existing string already created with either
> + * dump_stack_set_arch_desc() or dump_stack_add_arch_desc(). If there is an
> + * existing string a space will be prepended to the passed string.
> + */
> +void __init dump_stack_add_arch_desc(const char *fmt, ...)
> +{
> +	va_list args;
> +	int pos, len;
> +	char *p;
> +
> +	/*
> +	 * If there's an existing string we snprintf() past the end of it, and
> +	 * then turn the terminating NULL of the existing string into a space
> +	 * to create one string separated by a space.
> +	 *
> +	 * If there's no existing string we just snprintf() to the buffer, like
> +	 * dump_stack_set_arch_desc(), but without calling it because we'd need
> +	 * a varargs version.
> +	 */
> +	len = strnlen(dump_stack_arch_desc_str, sizeof(dump_stack_arch_desc_str));
> +	pos = len;
> +
> +	if (len)
> +		pos++;
> +
> +	if (pos >= sizeof(dump_stack_arch_desc_str))
> +		return; /* Ran out of space */
> +
> +	p = &dump_stack_arch_desc_str[pos];
> +
> +	va_start(args, fmt);
> +	vsnprintf(p, sizeof(dump_stack_arch_desc_str) - pos, fmt, args);
> +	va_end(args);
> +
> +	if (len) {
> +		/*
> +		 * Order the stores above in vsnprintf() vs the store of the
> +		 * space below which joins the two strings. Note this doesn't
> +		 * make the code truly race free because there is no barrier on
> +		 * the read side. ie. Another CPU might load the uninitialised
> +		 * tail of the buffer first and then the space below (rather
> +		 * than the NULL that was there previously), and so print the
> +		 * uninitialised tail. But the whole string lives in BSS so in
> +		 * practice it should just see NULLs.
> +		 */
> +		smp_wmb();

This shows me that this can be called at a time when more than one CPU is
active. What happens if we have two CPUs calling dump_stack_add_arch_desc() at
the same time? Can't that corrupt the dump_stack_arch_desc_str?

-- Steve

> +
> +		dump_stack_arch_desc_str[len] = ' ';
> +	}
> +}
> +
>  /**
>   * dump_stack_print_info - print generic debug info for dump_stack()
>   * @log_lvl: log level
> -- 
> 2.20.1

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v3 1/7] dump_stack: Support adding to the dump stack arch description
  2019-02-08 18:55 ` Steven Rostedt
@ 2019-02-11  7:55   ` Sergey Senozhatsky
  0 siblings, 0 replies; 16+ messages in thread
From: Sergey Senozhatsky @ 2019-02-11  7:55 UTC (permalink / raw)
  To: Steven Rostedt
  Cc: linux-arch, pmladek, sergey.senozhatsky, linux-kernel,
	linuxppc-dev, tj, akpm, dyoung

On (02/08/19 13:55), Steven Rostedt wrote:
[..]
> > +	if (len) {
> > +		/*
> > +		 * Order the stores above in vsnprintf() vs the store of the
> > +		 * space below which joins the two strings. Note this doesn't
> > +		 * make the code truly race free because there is no barrier on
> > +		 * the read side. ie. Another CPU might load the uninitialised
> > +		 * tail of the buffer first and then the space below (rather
> > +		 * than the NULL that was there previously), and so print the
> > +		 * uninitialised tail. But the whole string lives in BSS so in
> > +		 * practice it should just see NULLs.
> > +		 */
> > +		smp_wmb();
> 
> This shows me that this can be called at a time when more than one CPU is
> active. What happens if we have two CPUs calling dump_stack_add_arch_desc() at
> the same time? Can't that corrupt the dump_stack_arch_desc_str?

Can overwrite part of it, I guess (but it seems that Michael
is OK with this). The string is still NULL terminated.

The worst case scenario I can think of is not the one when
two CPUs call dump_stack_add_arch_desc(), but when CPUA calls
dump_stack_add_arch_desc() to append some data and at the
same time CPUB calls dump_stack_set_arch_desc() and simply
overwrites dump_stack_arch_desc_str. Not sure if this is
critical (or possible).

	-ss

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v3 1/7] dump_stack: Support adding to the dump stack arch description
  2019-02-07 12:46 [PATCH v3 1/7] dump_stack: Support adding to the dump stack arch description Michael Ellerman
                   ` (7 preceding siblings ...)
  2019-02-08 18:55 ` Steven Rostedt
@ 2019-02-11 12:50 ` Andrea Parri
  2019-02-11 14:38   ` Petr Mladek
  8 siblings, 1 reply; 16+ messages in thread
From: Andrea Parri @ 2019-02-11 12:50 UTC (permalink / raw)
  To: Michael Ellerman
  Cc: linux-arch, pmladek, sergey.senozhatsky, linux-kernel,
	linuxppc-dev, tj, akpm, dyoung

Hi Michael,


On Thu, Feb 07, 2019 at 11:46:29PM +1100, Michael Ellerman wrote:
> Arch code can set a "dump stack arch description string" which is
> displayed with oops output to describe the hardware platform.
> 
> It is useful to initialise this as early as possible, so that an early
> oops will have the hardware description.
> 
> However in practice we discover the hardware platform in stages, so it
> would be useful to be able to incrementally fill in the hardware
> description as we discover it.
> 
> This patch adds that ability, by creating dump_stack_add_arch_desc().
> 
> If there is no existing string it behaves exactly like
> dump_stack_set_arch_desc(). However if there is an existing string it
> appends to it, with a leading space.
> 
> This makes it easy to call it multiple times from different parts of the
> code and get a reasonable looking result.
> 
> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
> ---
>  include/linux/printk.h |  5 ++++
>  lib/dump_stack.c       | 58 ++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 63 insertions(+)
> 
> v3: No change, just widened Cc list.
> 
> v2: Add a smp_wmb() and comment.
> 
> v1 is here for reference https://lore.kernel.org/lkml/1430824337-15339-1-git-send-email-mpe@ellerman.id.au/
> 
> I'll take this series via the powerpc tree if no one minds?
> 
> 
> diff --git a/include/linux/printk.h b/include/linux/printk.h
> index 77740a506ebb..d5fb4f960271 100644
> --- a/include/linux/printk.h
> +++ b/include/linux/printk.h
> @@ -198,6 +198,7 @@ u32 log_buf_len_get(void);
>  void log_buf_vmcoreinfo_setup(void);
>  void __init setup_log_buf(int early);
>  __printf(1, 2) void dump_stack_set_arch_desc(const char *fmt, ...);
> +__printf(1, 2) void dump_stack_add_arch_desc(const char *fmt, ...);
>  void dump_stack_print_info(const char *log_lvl);
>  void show_regs_print_info(const char *log_lvl);
>  extern asmlinkage void dump_stack(void) __cold;
> @@ -256,6 +257,10 @@ static inline __printf(1, 2) void dump_stack_set_arch_desc(const char *fmt, ...)
>  {
>  }
>  
> +static inline __printf(1, 2) void dump_stack_add_arch_desc(const char *fmt, ...)
> +{
> +}
> +
>  static inline void dump_stack_print_info(const char *log_lvl)
>  {
>  }
> diff --git a/lib/dump_stack.c b/lib/dump_stack.c
> index 5cff72f18c4a..69b710ff92b5 100644
> --- a/lib/dump_stack.c
> +++ b/lib/dump_stack.c
> @@ -35,6 +35,64 @@ void __init dump_stack_set_arch_desc(const char *fmt, ...)
>  	va_end(args);
>  }
>  
> +/**
> + * dump_stack_add_arch_desc - add arch-specific info to show with task dumps
> + * @fmt: printf-style format string
> + * @...: arguments for the format string
> + *
> + * See dump_stack_set_arch_desc() for why you'd want to use this.
> + *
> + * This version adds to any existing string already created with either
> + * dump_stack_set_arch_desc() or dump_stack_add_arch_desc(). If there is an
> + * existing string a space will be prepended to the passed string.
> + */
> +void __init dump_stack_add_arch_desc(const char *fmt, ...)
> +{
> +	va_list args;
> +	int pos, len;
> +	char *p;
> +
> +	/*
> +	 * If there's an existing string we snprintf() past the end of it, and
> +	 * then turn the terminating NULL of the existing string into a space
> +	 * to create one string separated by a space.
> +	 *
> +	 * If there's no existing string we just snprintf() to the buffer, like
> +	 * dump_stack_set_arch_desc(), but without calling it because we'd need
> +	 * a varargs version.
> +	 */
> +	len = strnlen(dump_stack_arch_desc_str, sizeof(dump_stack_arch_desc_str));
> +	pos = len;
> +
> +	if (len)
> +		pos++;
> +
> +	if (pos >= sizeof(dump_stack_arch_desc_str))
> +		return; /* Ran out of space */
> +
> +	p = &dump_stack_arch_desc_str[pos];
> +
> +	va_start(args, fmt);
> +	vsnprintf(p, sizeof(dump_stack_arch_desc_str) - pos, fmt, args);
> +	va_end(args);
> +
> +	if (len) {
> +		/*
> +		 * Order the stores above in vsnprintf() vs the store of the
> +		 * space below which joins the two strings. Note this doesn't
> +		 * make the code truly race free because there is no barrier on
> +		 * the read side. ie. Another CPU might load the uninitialised
> +		 * tail of the buffer first and then the space below (rather
> +		 * than the NULL that was there previously), and so print the
> +		 * uninitialised tail. But the whole string lives in BSS so in
> +		 * practice it should just see NULLs.

The comment doesn't say _why_ we need to order these stores: IOW, what
will or can go wrong without this order?  This isn't clear to me.

Another good practice when adding smp_*-constructs (as discussed, e.g.,
at KS'18) is to indicate the matching construct/synch. mechanism.

  Andrea


> +		 */
> +		smp_wmb();
> +
> +		dump_stack_arch_desc_str[len] = ' ';
> +	}
> +}
> +
>  /**
>   * dump_stack_print_info - print generic debug info for dump_stack()
>   * @log_lvl: log level
> -- 
> 2.20.1
> 

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v3 1/7] dump_stack: Support adding to the dump stack arch description
  2019-02-11 12:50 ` Andrea Parri
@ 2019-02-11 14:38   ` Petr Mladek
  2019-02-19 23:39     ` Andrea Parri
  0 siblings, 1 reply; 16+ messages in thread
From: Petr Mladek @ 2019-02-11 14:38 UTC (permalink / raw)
  To: Andrea Parri
  Cc: linux-arch, sergey.senozhatsky, linux-kernel, linuxppc-dev, tj,
	akpm, dyoung

On Mon 2019-02-11 13:50:35, Andrea Parri wrote:
> Hi Michael,
> 
> 
> On Thu, Feb 07, 2019 at 11:46:29PM +1100, Michael Ellerman wrote:
> > Arch code can set a "dump stack arch description string" which is
> > displayed with oops output to describe the hardware platform.
> > 
> > It is useful to initialise this as early as possible, so that an early
> > oops will have the hardware description.
> > 
> > However in practice we discover the hardware platform in stages, so it
> > would be useful to be able to incrementally fill in the hardware
> > description as we discover it.
> > 
> > This patch adds that ability, by creating dump_stack_add_arch_desc().
> > 
> > If there is no existing string it behaves exactly like
> > dump_stack_set_arch_desc(). However if there is an existing string it
> > appends to it, with a leading space.
> > 
> > This makes it easy to call it multiple times from different parts of the
> > code and get a reasonable looking result.
> > 
> > Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
> > ---
> >  include/linux/printk.h |  5 ++++
> >  lib/dump_stack.c       | 58 ++++++++++++++++++++++++++++++++++++++++++
> >  2 files changed, 63 insertions(+)
> > 
> > v3: No change, just widened Cc list.
> > 
> > v2: Add a smp_wmb() and comment.
> > 
> > v1 is here for reference https://lore.kernel.org/lkml/1430824337-15339-1-git-send-email-mpe@ellerman.id.au/
> > 
> > I'll take this series via the powerpc tree if no one minds?
> > 
> > 
> > diff --git a/include/linux/printk.h b/include/linux/printk.h
> > index 77740a506ebb..d5fb4f960271 100644
> > --- a/include/linux/printk.h
> > +++ b/include/linux/printk.h
> > @@ -198,6 +198,7 @@ u32 log_buf_len_get(void);
> >  void log_buf_vmcoreinfo_setup(void);
> >  void __init setup_log_buf(int early);
> >  __printf(1, 2) void dump_stack_set_arch_desc(const char *fmt, ...);
> > +__printf(1, 2) void dump_stack_add_arch_desc(const char *fmt, ...);
> >  void dump_stack_print_info(const char *log_lvl);
> >  void show_regs_print_info(const char *log_lvl);
> >  extern asmlinkage void dump_stack(void) __cold;
> > @@ -256,6 +257,10 @@ static inline __printf(1, 2) void dump_stack_set_arch_desc(const char *fmt, ...)
> >  {
> >  }
> >  
> > +static inline __printf(1, 2) void dump_stack_add_arch_desc(const char *fmt, ...)
> > +{
> > +}
> > +
> >  static inline void dump_stack_print_info(const char *log_lvl)
> >  {
> >  }
> > diff --git a/lib/dump_stack.c b/lib/dump_stack.c
> > index 5cff72f18c4a..69b710ff92b5 100644
> > --- a/lib/dump_stack.c
> > +++ b/lib/dump_stack.c
> > @@ -35,6 +35,64 @@ void __init dump_stack_set_arch_desc(const char *fmt, ...)
> >  	va_end(args);
> >  }
> >  
> > +/**
> > + * dump_stack_add_arch_desc - add arch-specific info to show with task dumps
> > + * @fmt: printf-style format string
> > + * @...: arguments for the format string
> > + *
> > + * See dump_stack_set_arch_desc() for why you'd want to use this.
> > + *
> > + * This version adds to any existing string already created with either
> > + * dump_stack_set_arch_desc() or dump_stack_add_arch_desc(). If there is an
> > + * existing string a space will be prepended to the passed string.
> > + */
> > +void __init dump_stack_add_arch_desc(const char *fmt, ...)
> > +{
> > +	va_list args;
> > +	int pos, len;
> > +	char *p;
> > +
> > +	/*
> > +	 * If there's an existing string we snprintf() past the end of it, and
> > +	 * then turn the terminating NULL of the existing string into a space
> > +	 * to create one string separated by a space.
> > +	 *
> > +	 * If there's no existing string we just snprintf() to the buffer, like
> > +	 * dump_stack_set_arch_desc(), but without calling it because we'd need
> > +	 * a varargs version.
> > +	 */
> > +	len = strnlen(dump_stack_arch_desc_str, sizeof(dump_stack_arch_desc_str));
> > +	pos = len;
> > +
> > +	if (len)
> > +		pos++;
> > +
> > +	if (pos >= sizeof(dump_stack_arch_desc_str))
> > +		return; /* Ran out of space */
> > +
> > +	p = &dump_stack_arch_desc_str[pos];
> > +
> > +	va_start(args, fmt);
> > +	vsnprintf(p, sizeof(dump_stack_arch_desc_str) - pos, fmt, args);
> > +	va_end(args);
> > +
> > +	if (len) {
> > +		/*
> > +		 * Order the stores above in vsnprintf() vs the store of the
> > +		 * space below which joins the two strings. Note this doesn't
> > +		 * make the code truly race free because there is no barrier on
> > +		 * the read side. ie. Another CPU might load the uninitialised
> > +		 * tail of the buffer first and then the space below (rather
> > +		 * than the NULL that was there previously), and so print the
> > +		 * uninitialised tail. But the whole string lives in BSS so in
> > +		 * practice it should just see NULLs.
> 
> The comment doesn't say _why_ we need to order these stores: IOW, what
> will or can go wrong without this order?  This isn't clear to me.
>
> Another good practice when adding smp_*-constructs (as discussed, e.g.,
> at KS'18) is to indicate the matching construct/synch. mechanism.

Yes, one barrier without a counter-part is suspicious.

If the parallel access is really needed then we could define the
current length as atomic_t and use:

	+ atomic_cmpxchg() to reserve the space for the string
	+ %*s to limit the printed length

In the worst case, we would print an incomplete string.
See below for a sample code.


BTW: There are very few users of dump_stack_set_arch_desc().
I would use dump_stack_add_arch_desc() everywhere to keep
it simple and have a reasonable semantic.


This is what I mean (only compile tested):

diff --git a/lib/dump_stack.c b/lib/dump_stack.c
index 5cff72f18c4a..311dd20cc6a7 100644
--- a/lib/dump_stack.c
+++ b/lib/dump_stack.c
@@ -14,9 +14,10 @@
 #include <linux/utsname.h>
 
 static char dump_stack_arch_desc_str[128];
+static atomic_t arch_desc_str_len;
 
 /**
- * dump_stack_set_arch_desc - set arch-specific str to show with task dumps
+ * dump_stack_set_arch_desc - add arch-specific str to show with task dumps
  * @fmt: printf-style format string
  * @...: arguments for the format string
  *
@@ -25,13 +26,32 @@ static char dump_stack_arch_desc_str[128];
  * arch wants to make use of such an ID string, it should initialize this
  * as soon as possible during boot.
  */
-void __init dump_stack_set_arch_desc(const char *fmt, ...)
+void __init dump_stack_add_arch_desc(const char *fmt, ...)
 {
-	va_list args;
+	va_list args, args2;
+	int len, cur_len, old_len;
 
 	va_start(args, fmt);
-	vsnprintf(dump_stack_arch_desc_str, sizeof(dump_stack_arch_desc_str),
+
+	va_copy(args2, args);
+	len = vsnprintf(NULL, sizeof(dump_stack_arch_desc_str),
+			fmt, args2);
+	va_end(args2);
+
+try_again:
+	cur_len = atomic_read(&arch_desc_str_len);
+	if (cur_len + len > sizeof(dump_stack_arch_desc_str))
+		goto out;
+
+	old_len = atomic_cmpxchg(&arch_desc_str_len,
+				 cur_len, cur_len + len);
+	if (old_len != cur_len)
+		goto try_again;
+
+	vsnprintf(dump_stack_arch_desc_str + old_len,
+		  sizeof(dump_stack_arch_desc_str) - old_len,
 		  fmt, args);
+out:
 	va_end(args);
 }
 
@@ -44,6 +64,8 @@ void __init dump_stack_set_arch_desc(const char *fmt, ...)
  */
 void dump_stack_print_info(const char *log_lvl)
 {
+	int len;
+
 	printk("%sCPU: %d PID: %d Comm: %.20s %s%s %s %.*s\n",
 	       log_lvl, raw_smp_processor_id(), current->pid, current->comm,
 	       kexec_crash_loaded() ? "Kdump: loaded " : "",
@@ -52,9 +74,11 @@ void dump_stack_print_info(const char *log_lvl)
 	       (int)strcspn(init_utsname()->version, " "),
 	       init_utsname()->version);
 
-	if (dump_stack_arch_desc_str[0] != '\0')
-		printk("%sHardware name: %s\n",
-		       log_lvl, dump_stack_arch_desc_str);
+	len = atomic_read(&arch_desc_str_len);
+	if (len) {
+		printk("%sHardware name: %*s\n",
+		       log_lvl, len, dump_stack_arch_desc_str);
+	}
 
 	print_worker_info(log_lvl, current);
 }

Best Regards,
Petr

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v3 1/7] dump_stack: Support adding to the dump stack arch description
  2019-02-11 14:38   ` Petr Mladek
@ 2019-02-19 23:39     ` Andrea Parri
  2019-02-20  9:47       ` Michael Ellerman
  0 siblings, 1 reply; 16+ messages in thread
From: Andrea Parri @ 2019-02-19 23:39 UTC (permalink / raw)
  To: Petr Mladek
  Cc: linux-arch, sergey.senozhatsky, linux-kernel, Steven Rostedt,
	linuxppc-dev, tj, akpm, dyoung

On Mon, Feb 11, 2019 at 03:38:59PM +0100, Petr Mladek wrote:
> On Mon 2019-02-11 13:50:35, Andrea Parri wrote:
> > Hi Michael,
> > 
> > 
> > On Thu, Feb 07, 2019 at 11:46:29PM +1100, Michael Ellerman wrote:
> > > Arch code can set a "dump stack arch description string" which is
> > > displayed with oops output to describe the hardware platform.
> > > 
> > > It is useful to initialise this as early as possible, so that an early
> > > oops will have the hardware description.
> > > 
> > > However in practice we discover the hardware platform in stages, so it
> > > would be useful to be able to incrementally fill in the hardware
> > > description as we discover it.
> > > 
> > > This patch adds that ability, by creating dump_stack_add_arch_desc().
> > > 
> > > If there is no existing string it behaves exactly like
> > > dump_stack_set_arch_desc(). However if there is an existing string it
> > > appends to it, with a leading space.
> > > 
> > > This makes it easy to call it multiple times from different parts of the
> > > code and get a reasonable looking result.
> > > 
> > > Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
> > > ---
> > >  include/linux/printk.h |  5 ++++
> > >  lib/dump_stack.c       | 58 ++++++++++++++++++++++++++++++++++++++++++
> > >  2 files changed, 63 insertions(+)
> > > 
> > > v3: No change, just widened Cc list.
> > > 
> > > v2: Add a smp_wmb() and comment.
> > > 
> > > v1 is here for reference https://lore.kernel.org/lkml/1430824337-15339-1-git-send-email-mpe@ellerman.id.au/
> > > 
> > > I'll take this series via the powerpc tree if no one minds?
> > > 
> > > 
> > > diff --git a/include/linux/printk.h b/include/linux/printk.h
> > > index 77740a506ebb..d5fb4f960271 100644
> > > --- a/include/linux/printk.h
> > > +++ b/include/linux/printk.h
> > > @@ -198,6 +198,7 @@ u32 log_buf_len_get(void);
> > >  void log_buf_vmcoreinfo_setup(void);
> > >  void __init setup_log_buf(int early);
> > >  __printf(1, 2) void dump_stack_set_arch_desc(const char *fmt, ...);
> > > +__printf(1, 2) void dump_stack_add_arch_desc(const char *fmt, ...);
> > >  void dump_stack_print_info(const char *log_lvl);
> > >  void show_regs_print_info(const char *log_lvl);
> > >  extern asmlinkage void dump_stack(void) __cold;
> > > @@ -256,6 +257,10 @@ static inline __printf(1, 2) void dump_stack_set_arch_desc(const char *fmt, ...)
> > >  {
> > >  }
> > >  
> > > +static inline __printf(1, 2) void dump_stack_add_arch_desc(const char *fmt, ...)
> > > +{
> > > +}
> > > +
> > >  static inline void dump_stack_print_info(const char *log_lvl)
> > >  {
> > >  }
> > > diff --git a/lib/dump_stack.c b/lib/dump_stack.c
> > > index 5cff72f18c4a..69b710ff92b5 100644
> > > --- a/lib/dump_stack.c
> > > +++ b/lib/dump_stack.c
> > > @@ -35,6 +35,64 @@ void __init dump_stack_set_arch_desc(const char *fmt, ...)
> > >  	va_end(args);
> > >  }
> > >  
> > > +/**
> > > + * dump_stack_add_arch_desc - add arch-specific info to show with task dumps
> > > + * @fmt: printf-style format string
> > > + * @...: arguments for the format string
> > > + *
> > > + * See dump_stack_set_arch_desc() for why you'd want to use this.
> > > + *
> > > + * This version adds to any existing string already created with either
> > > + * dump_stack_set_arch_desc() or dump_stack_add_arch_desc(). If there is an
> > > + * existing string a space will be prepended to the passed string.
> > > + */
> > > +void __init dump_stack_add_arch_desc(const char *fmt, ...)
> > > +{
> > > +	va_list args;
> > > +	int pos, len;
> > > +	char *p;
> > > +
> > > +	/*
> > > +	 * If there's an existing string we snprintf() past the end of it, and
> > > +	 * then turn the terminating NULL of the existing string into a space
> > > +	 * to create one string separated by a space.
> > > +	 *
> > > +	 * If there's no existing string we just snprintf() to the buffer, like
> > > +	 * dump_stack_set_arch_desc(), but without calling it because we'd need
> > > +	 * a varargs version.
> > > +	 */
> > > +	len = strnlen(dump_stack_arch_desc_str, sizeof(dump_stack_arch_desc_str));
> > > +	pos = len;
> > > +
> > > +	if (len)
> > > +		pos++;
> > > +
> > > +	if (pos >= sizeof(dump_stack_arch_desc_str))
> > > +		return; /* Ran out of space */
> > > +
> > > +	p = &dump_stack_arch_desc_str[pos];
> > > +
> > > +	va_start(args, fmt);
> > > +	vsnprintf(p, sizeof(dump_stack_arch_desc_str) - pos, fmt, args);
> > > +	va_end(args);
> > > +
> > > +	if (len) {
> > > +		/*
> > > +		 * Order the stores above in vsnprintf() vs the store of the
> > > +		 * space below which joins the two strings. Note this doesn't
> > > +		 * make the code truly race free because there is no barrier on
> > > +		 * the read side. ie. Another CPU might load the uninitialised
> > > +		 * tail of the buffer first and then the space below (rather
> > > +		 * than the NULL that was there previously), and so print the
> > > +		 * uninitialised tail. But the whole string lives in BSS so in
> > > +		 * practice it should just see NULLs.
> > 
> > The comment doesn't say _why_ we need to order these stores: IOW, what
> > will or can go wrong without this order?  This isn't clear to me.
> >
> > Another good practice when adding smp_*-constructs (as discussed, e.g.,
> > at KS'18) is to indicate the matching construct/synch. mechanism.
> 
> Yes, one barrier without a counter-part is suspicious.

As is this silence...,

Michael, what happened to this patch? did you submit a new version?


> 
> If the parallel access is really needed then we could define the
> current length as atomic_t and use:
> 
> 	+ atomic_cmpxchg() to reserve the space for the string
> 	+ %*s to limit the printed length
> 
> In the worst case, we would print an incomplete string.
> See below for a sample code.

Seems worth exploring, IMO; but I'd like to first hear _clear about
the _intended semantics (before digging into alternatives)...

+rostedt,  who first raised the question about "parallel accesses"

  http://lkml.kernel.org/r/20190208185515.r6vkrezbd3odhpxt@home.goodmis.org

  Andrea


> 
> 
> BTW: There are very few users of dump_stack_set_arch_desc().
> I would use dump_stack_add_arch_desc() everywhere to keep
> it simple and have a reasonable semantic.
> 
> 
> This is what I mean (only compile tested):
> 
> diff --git a/lib/dump_stack.c b/lib/dump_stack.c
> index 5cff72f18c4a..311dd20cc6a7 100644
> --- a/lib/dump_stack.c
> +++ b/lib/dump_stack.c
> @@ -14,9 +14,10 @@
>  #include <linux/utsname.h>
>  
>  static char dump_stack_arch_desc_str[128];
> +static atomic_t arch_desc_str_len;
>  
>  /**
> - * dump_stack_set_arch_desc - set arch-specific str to show with task dumps
> + * dump_stack_set_arch_desc - add arch-specific str to show with task dumps
>   * @fmt: printf-style format string
>   * @...: arguments for the format string
>   *
> @@ -25,13 +26,32 @@ static char dump_stack_arch_desc_str[128];
>   * arch wants to make use of such an ID string, it should initialize this
>   * as soon as possible during boot.
>   */
> -void __init dump_stack_set_arch_desc(const char *fmt, ...)
> +void __init dump_stack_add_arch_desc(const char *fmt, ...)
>  {
> -	va_list args;
> +	va_list args, args2;
> +	int len, cur_len, old_len;
>  
>  	va_start(args, fmt);
> -	vsnprintf(dump_stack_arch_desc_str, sizeof(dump_stack_arch_desc_str),
> +
> +	va_copy(args2, args);
> +	len = vsnprintf(NULL, sizeof(dump_stack_arch_desc_str),
> +			fmt, args2);
> +	va_end(args2);
> +
> +try_again:
> +	cur_len = atomic_read(&arch_desc_str_len);
> +	if (cur_len + len > sizeof(dump_stack_arch_desc_str))
> +		goto out;
> +
> +	old_len = atomic_cmpxchg(&arch_desc_str_len,
> +				 cur_len, cur_len + len);
> +	if (old_len != cur_len)
> +		goto try_again;
> +
> +	vsnprintf(dump_stack_arch_desc_str + old_len,
> +		  sizeof(dump_stack_arch_desc_str) - old_len,
>  		  fmt, args);
> +out:
>  	va_end(args);
>  }
>  
> @@ -44,6 +64,8 @@ void __init dump_stack_set_arch_desc(const char *fmt, ...)
>   */
>  void dump_stack_print_info(const char *log_lvl)
>  {
> +	int len;
> +
>  	printk("%sCPU: %d PID: %d Comm: %.20s %s%s %s %.*s\n",
>  	       log_lvl, raw_smp_processor_id(), current->pid, current->comm,
>  	       kexec_crash_loaded() ? "Kdump: loaded " : "",
> @@ -52,9 +74,11 @@ void dump_stack_print_info(const char *log_lvl)
>  	       (int)strcspn(init_utsname()->version, " "),
>  	       init_utsname()->version);
>  
> -	if (dump_stack_arch_desc_str[0] != '\0')
> -		printk("%sHardware name: %s\n",
> -		       log_lvl, dump_stack_arch_desc_str);
> +	len = atomic_read(&arch_desc_str_len);
> +	if (len) {
> +		printk("%sHardware name: %*s\n",
> +		       log_lvl, len, dump_stack_arch_desc_str);
> +	}
>  
>  	print_worker_info(log_lvl, current);
>  }
> 
> Best Regards,
> Petr

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v3 1/7] dump_stack: Support adding to the dump stack arch description
  2019-02-19 23:39     ` Andrea Parri
@ 2019-02-20  9:47       ` Michael Ellerman
  2019-02-20 13:44         ` Andrea Parri
  0 siblings, 1 reply; 16+ messages in thread
From: Michael Ellerman @ 2019-02-20  9:47 UTC (permalink / raw)
  To: Andrea Parri, Petr Mladek
  Cc: linux-arch, sergey.senozhatsky, linux-kernel, Steven Rostedt,
	linuxppc-dev, tj, akpm, dyoung

Andrea Parri <andrea.parri@amarulasolutions.com> writes:
> On Mon, Feb 11, 2019 at 03:38:59PM +0100, Petr Mladek wrote:
>> On Mon 2019-02-11 13:50:35, Andrea Parri wrote:
>> > On Thu, Feb 07, 2019 at 11:46:29PM +1100, Michael Ellerman wrote:
>> > > Arch code can set a "dump stack arch description string" which is
>> > > displayed with oops output to describe the hardware platform.
>> > > 
>> > > It is useful to initialise this as early as possible, so that an early
>> > > oops will have the hardware description.
>> > > 
>> > > However in practice we discover the hardware platform in stages, so it
>> > > would be useful to be able to incrementally fill in the hardware
>> > > description as we discover it.
>> > > 
>> > > This patch adds that ability, by creating dump_stack_add_arch_desc().
>> > > 
>> > > If there is no existing string it behaves exactly like
>> > > dump_stack_set_arch_desc(). However if there is an existing string it
>> > > appends to it, with a leading space.
>> > > 
>> > > This makes it easy to call it multiple times from different parts of the
>> > > code and get a reasonable looking result.
>> > > 
>> > > Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
>> > > ---
>> > >  include/linux/printk.h |  5 ++++
>> > >  lib/dump_stack.c       | 58 ++++++++++++++++++++++++++++++++++++++++++
>> > >  2 files changed, 63 insertions(+)
>> > > 
>> > > v3: No change, just widened Cc list.
>> > > 
>> > > v2: Add a smp_wmb() and comment.
>> > > 
>> > > v1 is here for reference https://lore.kernel.org/lkml/1430824337-15339-1-git-send-email-mpe@ellerman.id.au/
>> > > 
>> > > I'll take this series via the powerpc tree if no one minds?
>> > > 
>> > > 
>> > > diff --git a/include/linux/printk.h b/include/linux/printk.h
>> > > index 77740a506ebb..d5fb4f960271 100644
>> > > --- a/include/linux/printk.h
>> > > +++ b/include/linux/printk.h
>> > > @@ -198,6 +198,7 @@ u32 log_buf_len_get(void);
>> > >  void log_buf_vmcoreinfo_setup(void);
>> > >  void __init setup_log_buf(int early);
>> > >  __printf(1, 2) void dump_stack_set_arch_desc(const char *fmt, ...);
>> > > +__printf(1, 2) void dump_stack_add_arch_desc(const char *fmt, ...);
>> > >  void dump_stack_print_info(const char *log_lvl);
>> > >  void show_regs_print_info(const char *log_lvl);
>> > >  extern asmlinkage void dump_stack(void) __cold;
>> > > @@ -256,6 +257,10 @@ static inline __printf(1, 2) void dump_stack_set_arch_desc(const char *fmt, ...)
>> > >  {
>> > >  }
>> > >  
>> > > +static inline __printf(1, 2) void dump_stack_add_arch_desc(const char *fmt, ...)
>> > > +{
>> > > +}
>> > > +
>> > >  static inline void dump_stack_print_info(const char *log_lvl)
>> > >  {
>> > >  }
>> > > diff --git a/lib/dump_stack.c b/lib/dump_stack.c
>> > > index 5cff72f18c4a..69b710ff92b5 100644
>> > > --- a/lib/dump_stack.c
>> > > +++ b/lib/dump_stack.c
>> > > @@ -35,6 +35,64 @@ void __init dump_stack_set_arch_desc(const char *fmt, ...)
>> > >  	va_end(args);
>> > >  }
>> > >  
>> > > +/**
>> > > + * dump_stack_add_arch_desc - add arch-specific info to show with task dumps
>> > > + * @fmt: printf-style format string
>> > > + * @...: arguments for the format string
>> > > + *
>> > > + * See dump_stack_set_arch_desc() for why you'd want to use this.
>> > > + *
>> > > + * This version adds to any existing string already created with either
>> > > + * dump_stack_set_arch_desc() or dump_stack_add_arch_desc(). If there is an
>> > > + * existing string a space will be prepended to the passed string.
>> > > + */
>> > > +void __init dump_stack_add_arch_desc(const char *fmt, ...)
>> > > +{
>> > > +	va_list args;
>> > > +	int pos, len;
>> > > +	char *p;
>> > > +
>> > > +	/*
>> > > +	 * If there's an existing string we snprintf() past the end of it, and
>> > > +	 * then turn the terminating NULL of the existing string into a space
>> > > +	 * to create one string separated by a space.
>> > > +	 *
>> > > +	 * If there's no existing string we just snprintf() to the buffer, like
>> > > +	 * dump_stack_set_arch_desc(), but without calling it because we'd need
>> > > +	 * a varargs version.
>> > > +	 */
>> > > +	len = strnlen(dump_stack_arch_desc_str, sizeof(dump_stack_arch_desc_str));
>> > > +	pos = len;
>> > > +
>> > > +	if (len)
>> > > +		pos++;
>> > > +
>> > > +	if (pos >= sizeof(dump_stack_arch_desc_str))
>> > > +		return; /* Ran out of space */
>> > > +
>> > > +	p = &dump_stack_arch_desc_str[pos];
>> > > +
>> > > +	va_start(args, fmt);
>> > > +	vsnprintf(p, sizeof(dump_stack_arch_desc_str) - pos, fmt, args);
>> > > +	va_end(args);
>> > > +
>> > > +	if (len) {
>> > > +		/*
>> > > +		 * Order the stores above in vsnprintf() vs the store of the
>> > > +		 * space below which joins the two strings. Note this doesn't
>> > > +		 * make the code truly race free because there is no barrier on
>> > > +		 * the read side. ie. Another CPU might load the uninitialised
>> > > +		 * tail of the buffer first and then the space below (rather
>> > > +		 * than the NULL that was there previously), and so print the
>> > > +		 * uninitialised tail. But the whole string lives in BSS so in
>> > > +		 * practice it should just see NULLs.
>> > 
>> > The comment doesn't say _why_ we need to order these stores: IOW, what
>> > will or can go wrong without this order?  This isn't clear to me.
>> >
>> > Another good practice when adding smp_*-constructs (as discussed, e.g.,
>> > at KS'18) is to indicate the matching construct/synch. mechanism.
>> 
>> Yes, one barrier without a counter-part is suspicious.
>
> As is this silence...,
>
> Michael, what happened to this patch? did you submit a new version?

No, I'm just busy, it's the merge window next week :)

I thought the comment was pretty clear, if the stores are observed out
of order we might print the uninitialised tail.

And the barrier on the read side would need to be in printk somewhere,
which is obviously unpleasant.

>> If the parallel access is really needed then we could define the
>> current length as atomic_t and use:
>> 
>> 	+ atomic_cmpxchg() to reserve the space for the string
>> 	+ %*s to limit the printed length
>> 
>> In the worst case, we would print an incomplete string.
>> See below for a sample code.
>
> Seems worth exploring, IMO; but I'd like to first hear _clear about
> the _intended semantics (before digging into alternatives)...

It is not my intention to support concurrent updates of the string. The
idea is you setup the string early in boot.

The concern with a concurrent reader is simply that the string is dumped
in the panic path, and you never really know when you're going to panic.
Even if you only write to the string before doing SMP bringup you might
still have another CPU go rogue and panic before then.

But I probably should have just not added the barrier, it's over
paranoid and will almost certainly never matter in practice.

cheers

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v3 1/7] dump_stack: Support adding to the dump stack arch description
  2019-02-20  9:47       ` Michael Ellerman
@ 2019-02-20 13:44         ` Andrea Parri
  2019-02-21  8:38           ` Petr Mladek
  0 siblings, 1 reply; 16+ messages in thread
From: Andrea Parri @ 2019-02-20 13:44 UTC (permalink / raw)
  To: Michael Ellerman
  Cc: linux-arch, Petr Mladek, sergey.senozhatsky, linux-kernel,
	Steven Rostedt, linuxppc-dev, tj, akpm, dyoung

> >> > > +		 * Order the stores above in vsnprintf() vs the store of the
> >> > > +		 * space below which joins the two strings. Note this doesn't
> >> > > +		 * make the code truly race free because there is no barrier on
> >> > > +		 * the read side. ie. Another CPU might load the uninitialised
> >> > > +		 * tail of the buffer first and then the space below (rather
> >> > > +		 * than the NULL that was there previously), and so print the
> >> > > +		 * uninitialised tail. But the whole string lives in BSS so in
> >> > > +		 * practice it should just see NULLs.
> >> > 
> >> > The comment doesn't say _why_ we need to order these stores: IOW, what
> >> > will or can go wrong without this order?  This isn't clear to me.
> >> >
> >> > Another good practice when adding smp_*-constructs (as discussed, e.g.,
> >> > at KS'18) is to indicate the matching construct/synch. mechanism.
> >> 
> >> Yes, one barrier without a counter-part is suspicious.
> >
> > As is this silence...,
> >
> > Michael, what happened to this patch? did you submit a new version?
> 
> No, I'm just busy, it's the merge window next week :)

Got it.


> 
> I thought the comment was pretty clear, if the stores are observed out
> of order we might print the uninitialised tail.
> 
> And the barrier on the read side would need to be in printk somewhere,
> which is obviously unpleasant.

Indeed.


> 
> >> If the parallel access is really needed then we could define the
> >> current length as atomic_t and use:
> >> 
> >> 	+ atomic_cmpxchg() to reserve the space for the string
> >> 	+ %*s to limit the printed length
> >> 
> >> In the worst case, we would print an incomplete string.
> >> See below for a sample code.
> >
> > Seems worth exploring, IMO; but I'd like to first hear _clear about
> > the _intended semantics (before digging into alternatives)...
> 
> It is not my intention to support concurrent updates of the string. The
> idea is you setup the string early in boot.

Understood, thanks for the clarification.


> 
> The concern with a concurrent reader is simply that the string is dumped
> in the panic path, and you never really know when you're going to panic.
> Even if you only write to the string before doing SMP bringup you might
> still have another CPU go rogue and panic before then.
> 
> But I probably should have just not added the barrier, it's over
> paranoid and will almost certainly never matter in practice.

Oh, well, I can only echo you: if you don't care about the stores being
_observed_ out of order, you could simply remove the barrier; if you do
care, then you need "more paranoid" on the readers side.  ;-)

  Andrea


> 
> cheers

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v3 1/7] dump_stack: Support adding to the dump stack arch description
  2019-02-20 13:44         ` Andrea Parri
@ 2019-02-21  8:38           ` Petr Mladek
  0 siblings, 0 replies; 16+ messages in thread
From: Petr Mladek @ 2019-02-21  8:38 UTC (permalink / raw)
  To: Andrea Parri
  Cc: linux-arch, sergey.senozhatsky, linux-kernel, Steven Rostedt,
	linuxppc-dev, tj, akpm, dyoung

On Wed 2019-02-20 14:44:33, Andrea Parri wrote:
> > >> > > +		 * Order the stores above in vsnprintf() vs the store of the
> > >> > > +		 * space below which joins the two strings. Note this doesn't
> > >> > > +		 * make the code truly race free because there is no barrier on
> > >> > > +		 * the read side. ie. Another CPU might load the uninitialised
> > >> > > +		 * tail of the buffer first and then the space below (rather
> > >> > > +		 * than the NULL that was there previously), and so print the
> > >> > > +		 * uninitialised tail. But the whole string lives in BSS so in
> > >> > > +		 * practice it should just see NULLs.
> > >> > 
> > It is not my intention to support concurrent updates of the string. The
> > idea is you setup the string early in boot.
> 
> Understood, thanks for the clarification.
> > 
> > The concern with a concurrent reader is simply that the string is dumped
> > in the panic path, and you never really know when you're going to panic.
> > Even if you only write to the string before doing SMP bringup you might
> > still have another CPU go rogue and panic before then.
> > 
> > But I probably should have just not added the barrier, it's over
> > paranoid and will almost certainly never matter in practice.
> 
> Oh, well, I can only echo you: if you don't care about the stores being
> _observed_ out of order, you could simply remove the barrier; if you do
> care, then you need "more paranoid" on the readers side.  ;-)

Hmm, the barrier might be fine and actually useful. The
purpose is to make sure that the later '\0' is written before
the existing one is replaced by ' '.

The reader does not need the barrier as long as it reads the string
sequentially. I would expect that it is always the case. But who
knows with all the speculation-related CPU bugs around.

In each case, any race could never crash the kernel.
The dump_stack_arch_desc_str is zeroed out of box and
the very last '\0' is never rewritten.

Best Regards,
Petr

^ permalink raw reply	[flat|nested] 16+ messages in thread

end of thread, back to index

Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-07 12:46 [PATCH v3 1/7] dump_stack: Support adding to the dump stack arch description Michael Ellerman
2019-02-07 12:46 ` [PATCH v3 2/7] powerpc: Add PVR & CPU name to " Michael Ellerman
2019-02-07 12:46 ` [PATCH v3 3/7] powerpc/64: Add logical PVR to the " Michael Ellerman
2019-02-07 12:46 ` [PATCH v3 4/7] powerpc: Add device-tree model to " Michael Ellerman
2019-02-07 12:46 ` [PATCH v3 5/7] powerpc: Add ppc_md.name " Michael Ellerman
2019-02-07 12:46 ` [PATCH v3 6/7] powerpc/powernv: Add opal details " Michael Ellerman
2019-02-07 12:46 ` [PATCH v3 7/7] powerpc/pseries: Add firmware " Michael Ellerman
2019-02-08  2:01 ` [PATCH v3 1/7] dump_stack: Support adding to the " Sergey Senozhatsky
2019-02-08 18:55 ` Steven Rostedt
2019-02-11  7:55   ` Sergey Senozhatsky
2019-02-11 12:50 ` Andrea Parri
2019-02-11 14:38   ` Petr Mladek
2019-02-19 23:39     ` Andrea Parri
2019-02-20  9:47       ` Michael Ellerman
2019-02-20 13:44         ` Andrea Parri
2019-02-21  8:38           ` Petr Mladek

LinuxPPC-Dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linuxppc-dev/0 linuxppc-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linuxppc-dev linuxppc-dev/ https://lore.kernel.org/linuxppc-dev \
		linuxppc-dev@lists.ozlabs.org linuxppc-dev@ozlabs.org linuxppc-dev@archiver.kernel.org
	public-inbox-index linuxppc-dev


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.ozlabs.lists.linuxppc-dev


AGPL code for this site: git clone https://public-inbox.org/ public-inbox