linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: "Cédric Le Goater" <clg@kaod.org>
To: kvm-ppc@vger.kernel.org
Cc: kvm@vger.kernel.org, "Paul Mackerras" <paulus@samba.org>,
	"Cédric Le Goater" <clg@kaod.org>,
	linuxppc-dev@lists.ozlabs.org,
	"David Gibson" <david@gibson.dropbear.id.au>
Subject: [PATCH v2 07/16] KVM: PPC: Book3S HV: XIVE: add a global reset control
Date: Fri, 22 Feb 2019 12:28:31 +0100	[thread overview]
Message-ID: <20190222112840.25000-8-clg@kaod.org> (raw)
In-Reply-To: <20190222112840.25000-1-clg@kaod.org>

This control is to be used by the H_INT_RESET hcall from QEMU. Its
purpose is to clear all configuration of the sources and EQs. This is
necessary in case of a kexec (for a kdump kernel for instance) to make
sure that no remaining configuration is left from the previous boot
setup so that the new kernel can start safely from a clean state.

The queue 7 is ignored when the KVM device is configured to run in
single escalation mode. Prio 7 is used by escalations.

The XIVE VP is kept enabled as the vCPU is still active and connected
to the XIVE device.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 arch/powerpc/include/uapi/asm/kvm.h        |  1 +
 arch/powerpc/kvm/book3s_xive_native.c      | 82 ++++++++++++++++++++++
 Documentation/virtual/kvm/devices/xive.txt |  5 ++
 3 files changed, 88 insertions(+)

diff --git a/arch/powerpc/include/uapi/asm/kvm.h b/arch/powerpc/include/uapi/asm/kvm.h
index 177e43f3edaf..7ae8cb22af7d 100644
--- a/arch/powerpc/include/uapi/asm/kvm.h
+++ b/arch/powerpc/include/uapi/asm/kvm.h
@@ -677,6 +677,7 @@ struct kvm_ppc_cpu_char {
 
 /* POWER9 XIVE Native Interrupt Controller */
 #define KVM_DEV_XIVE_GRP_CTRL		1
+#define   KVM_DEV_XIVE_RESET		1
 #define KVM_DEV_XIVE_GRP_SOURCE		2	/* 64-bit source attributes */
 #define KVM_DEV_XIVE_GRP_SOURCE_CONFIG	3	/* 64-bit source attributes */
 #define KVM_DEV_XIVE_GRP_EQ_CONFIG	4	/* 64-bit eq attributes */
diff --git a/arch/powerpc/kvm/book3s_xive_native.c b/arch/powerpc/kvm/book3s_xive_native.c
index 34a35bcf550c..bb3e121c918a 100644
--- a/arch/powerpc/kvm/book3s_xive_native.c
+++ b/arch/powerpc/kvm/book3s_xive_native.c
@@ -536,6 +536,80 @@ static int kvmppc_xive_native_get_queue_config(struct kvmppc_xive *xive,
 	return 0;
 }
 
+static void kvmppc_xive_reset_sources(struct kvmppc_xive_src_block *sb)
+{
+	int i;
+
+	for (i = 0; i < KVMPPC_XICS_IRQ_PER_ICS; i++) {
+		struct kvmppc_xive_irq_state *state = &sb->irq_state[i];
+
+		if (!state->valid)
+			continue;
+
+		if (state->act_priority == MASKED)
+			continue;
+
+		arch_spin_lock(&sb->lock);
+		state->eisn = 0;
+		state->act_server = 0;
+		state->act_priority = MASKED;
+		xive_vm_esb_load(&state->ipi_data, XIVE_ESB_SET_PQ_01);
+		xive_native_configure_irq(state->ipi_number, 0, MASKED, 0);
+		if (state->pt_number) {
+			xive_vm_esb_load(state->pt_data, XIVE_ESB_SET_PQ_01);
+			xive_native_configure_irq(state->pt_number,
+						  0, MASKED, 0);
+		}
+		arch_spin_unlock(&sb->lock);
+	}
+}
+
+static int kvmppc_xive_reset(struct kvmppc_xive *xive)
+{
+	struct kvm *kvm = xive->kvm;
+	struct kvm_vcpu *vcpu;
+	unsigned int i;
+
+	pr_devel("%s\n", __func__);
+
+	mutex_lock(&kvm->lock);
+
+	kvm_for_each_vcpu(i, vcpu, kvm) {
+		struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
+		unsigned int prio;
+
+		if (!xc)
+			continue;
+
+		kvmppc_xive_disable_vcpu_interrupts(vcpu);
+
+		for (prio = 0; prio < KVMPPC_XIVE_Q_COUNT; prio++) {
+
+			/* Single escalation, no queue 7 */
+			if (prio == 7 && xive->single_escalation)
+				break;
+
+			if (xc->esc_virq[prio]) {
+				free_irq(xc->esc_virq[prio], vcpu);
+				irq_dispose_mapping(xc->esc_virq[prio]);
+				kfree(xc->esc_virq_names[prio]);
+				xc->esc_virq[prio] = 0;
+			}
+
+			kvmppc_xive_native_cleanup_queue(vcpu, prio);
+		}
+	}
+
+	for (i = 0; i <= xive->max_sbid; i++) {
+		if (xive->src_blocks[i])
+			kvmppc_xive_reset_sources(xive->src_blocks[i]);
+	}
+
+	mutex_unlock(&kvm->lock);
+
+	return 0;
+}
+
 static int kvmppc_xive_native_set_attr(struct kvm_device *dev,
 				       struct kvm_device_attr *attr)
 {
@@ -543,6 +617,10 @@ static int kvmppc_xive_native_set_attr(struct kvm_device *dev,
 
 	switch (attr->group) {
 	case KVM_DEV_XIVE_GRP_CTRL:
+		switch (attr->attr) {
+		case KVM_DEV_XIVE_RESET:
+			return kvmppc_xive_reset(xive);
+		}
 		break;
 	case KVM_DEV_XIVE_GRP_SOURCE:
 		return kvmppc_xive_native_set_source(xive, attr->attr,
@@ -575,6 +653,10 @@ static int kvmppc_xive_native_has_attr(struct kvm_device *dev,
 {
 	switch (attr->group) {
 	case KVM_DEV_XIVE_GRP_CTRL:
+		switch (attr->attr) {
+		case KVM_DEV_XIVE_RESET:
+			return 0;
+		}
 		break;
 	case KVM_DEV_XIVE_GRP_SOURCE:
 	case KVM_DEV_XIVE_GRP_SOURCE_CONFIG:
diff --git a/Documentation/virtual/kvm/devices/xive.txt b/Documentation/virtual/kvm/devices/xive.txt
index c0b5d9bd43fb..f1d007f485a9 100644
--- a/Documentation/virtual/kvm/devices/xive.txt
+++ b/Documentation/virtual/kvm/devices/xive.txt
@@ -17,6 +17,11 @@ the legacy interrupt mode, referred as XICS (POWER7/8).
 
   1. KVM_DEV_XIVE_GRP_CTRL
   Provides global controls on the device
+  Attributes:
+    1.1 KVM_DEV_XIVE_RESET (write only)
+    Resets the interrupt controller configuration for sources and event
+    queues. To be used by kexec and kdump.
+    Errors: none
 
   2. KVM_DEV_XIVE_GRP_SOURCE (write only)
   Initializes a new source in the XIVE device and mask it.
-- 
2.20.1


  parent reply	other threads:[~2019-02-22 12:01 UTC|newest]

Thread overview: 71+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-22 11:28 [PATCH v2 00/16] KVM: PPC: Book3S HV: add XIVE native exploitation mode Cédric Le Goater
2019-02-22 11:28 ` [PATCH v2 01/16] powerpc/xive: add OPAL extensions for the XIVE native exploitation support Cédric Le Goater
2019-02-24 23:42   ` David Gibson
2019-02-25  3:50   ` Michael Ellerman
2019-02-25 10:11     ` Cédric Le Goater
2019-02-26  4:21       ` David Gibson
2019-03-12 18:25         ` Cédric Le Goater
2019-02-22 11:28 ` [PATCH v2 02/16] KVM: PPC: Book3S HV: add a new KVM device for the XIVE native exploitation mode Cédric Le Goater
2019-02-25  0:08   ` David Gibson
2019-03-12 11:14     ` Cédric Le Goater
2019-02-22 11:28 ` [PATCH v2 03/16] KVM: PPC: Book3S HV: XIVE: introduce a new capability KVM_CAP_PPC_IRQ_XIVE Cédric Le Goater
2019-02-25  0:35   ` David Gibson
2019-02-25  4:59     ` Paul Mackerras
2019-03-12 14:10       ` Cédric Le Goater
2019-03-12 14:03     ` Cédric Le Goater
2019-03-13  4:05       ` David Gibson
2019-02-25  4:35   ` Paul Mackerras
2019-03-13  8:34     ` Cédric Le Goater
2019-03-14  2:29       ` David Gibson
2019-02-22 11:28 ` [PATCH v2 04/16] KVM: PPC: Book3S HV: XIVE: add a control to initialize a source Cédric Le Goater
2019-02-25  2:10   ` David Gibson
2019-02-26  4:25     ` Paul Mackerras
2019-02-26 23:20       ` David Gibson
2019-03-12 15:19     ` Cédric Le Goater
2019-03-14  2:15       ` David Gibson
2019-02-25  5:30   ` Paul Mackerras
2019-02-22 11:28 ` [PATCH v2 05/16] KVM: PPC: Book3S HV: XIVE: add a control to configure " Cédric Le Goater
2019-02-25  2:21   ` David Gibson
2019-02-22 11:28 ` [PATCH v2 06/16] KVM: PPC: Book3S HV: XIVE: add controls for the EQ configuration Cédric Le Goater
2019-02-25  2:39   ` David Gibson
2019-03-12 17:00     ` Cédric Le Goater
2019-03-13  4:03       ` David Gibson
2019-03-13  8:46         ` Cédric Le Goater
2019-03-14  3:29           ` David Gibson
2019-02-26  5:24   ` Paul Mackerras
2019-03-13  9:40     ` Cédric Le Goater
2019-03-14  2:32       ` David Gibson
2019-03-14  7:11         ` Cédric Le Goater
2019-03-15  0:29           ` David Gibson
2019-02-22 11:28 ` Cédric Le Goater [this message]
2019-02-25  2:43   ` [PATCH v2 07/16] KVM: PPC: Book3S HV: XIVE: add a global reset control David Gibson
2019-02-22 11:28 ` [PATCH v2 08/16] KVM: PPC: Book3S HV: XIVE: add a control to sync the sources Cédric Le Goater
2019-02-25  2:45   ` David Gibson
2019-02-22 11:28 ` [PATCH v2 09/16] KVM: PPC: Book3S HV: XIVE: add a control to dirty the XIVE EQ pages Cédric Le Goater
2019-02-25  2:53   ` David Gibson
2019-03-13 11:48     ` Cédric Le Goater
2019-03-14  2:33       ` David Gibson
2019-02-22 11:28 ` [PATCH v2 10/16] KVM: PPC: Book3S HV: XIVE: add get/set accessors for the VP XIVE state Cédric Le Goater
2019-02-25  3:31   ` David Gibson
2019-03-13 13:19     ` Cédric Le Goater
2019-03-14  3:09       ` David Gibson
2019-03-14  7:08         ` Cédric Le Goater
2019-02-22 11:28 ` [PATCH v2 11/16] KVM: introduce a 'mmap' method for KVM devices Cédric Le Goater
2019-02-25  3:33   ` David Gibson
2019-02-25 10:57     ` Cédric Le Goater
2019-02-26 12:52       ` Paolo Bonzini
2019-02-26 23:22         ` David Gibson
2019-02-22 11:28 ` [PATCH v2 12/16] KVM: PPC: Book3S HV: XIVE: add a TIMA mapping Cédric Le Goater
2019-02-25  3:42   ` David Gibson
2019-02-22 11:28 ` [PATCH v2 13/16] KVM: PPC: Book3S HV: XIVE: add a mapping for the source ESB pages Cédric Le Goater
2019-02-25  3:47   ` David Gibson
2019-02-22 11:28 ` [PATCH v2 14/16] KVM: PPC: Book3S HV: XIVE: add passthrough support Cédric Le Goater
2019-02-25  4:13   ` David Gibson
2019-02-22 11:28 ` [PATCH v2 15/16] KVM: introduce a KVM_DESTROY_DEVICE ioctl Cédric Le Goater
2019-02-25  4:15   ` David Gibson
2019-03-13  8:02     ` Cédric Le Goater
2019-03-15 17:57       ` Paolo Bonzini
2019-02-22 11:28 ` [PATCH v2 16/16] KVM: PPC: Book3S HV: XIVE: clear the vCPU interrupt presenters Cédric Le Goater
2019-02-25  4:18   ` David Gibson
2019-03-13  8:17     ` Cédric Le Goater
2019-03-14  2:26       ` David Gibson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190222112840.25000-8-clg@kaod.org \
    --to=clg@kaod.org \
    --cc=david@gibson.dropbear.id.au \
    --cc=kvm-ppc@vger.kernel.org \
    --cc=kvm@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).