linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Andrew Donnellan <ajd@linux.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v2 1/5] powerpc/powernv: Move SCOM access code into powernv platform
Date: Thu,  9 May 2019 15:11:15 +1000	[thread overview]
Message-ID: <20190509051119.7694-1-ajd@linux.ibm.com> (raw)

The powernv platform is the only one that directly accesses SCOMs. Move the
support code to platforms/powernv, and get rid of the PPC_SCOM Kconfig
option, as SCOM support is always selected when compiling for powernv.

This also means that the Kconfig item for CONFIG_SCOM_DEBUGFS will actually
show up in menuconfig, as previously it was the only labelled option in
sysdev/Kconfig and wasn't actually in a menu.

Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
---
v1->v2:
- move scom.h as well (mpe)
- add all the other patches in this series
---
 arch/powerpc/platforms/powernv/Kconfig              |  5 ++++-
 arch/powerpc/platforms/powernv/Makefile             |  2 +-
 arch/powerpc/platforms/powernv/opal-xscom.c         |  3 ++-
 arch/powerpc/{sysdev => platforms/powernv}/scom.c   |  3 ++-
 .../{include/asm => platforms/powernv}/scom.h       | 13 +++----------
 arch/powerpc/sysdev/Kconfig                         |  7 -------
 arch/powerpc/sysdev/Makefile                        |  2 --
 7 files changed, 12 insertions(+), 23 deletions(-)
 rename arch/powerpc/{sysdev => platforms/powernv}/scom.c (99%)
 rename arch/powerpc/{include/asm => platforms/powernv}/scom.h (95%)

diff --git a/arch/powerpc/platforms/powernv/Kconfig b/arch/powerpc/platforms/powernv/Kconfig
index 850eee860cf2..938803eab0ad 100644
--- a/arch/powerpc/platforms/powernv/Kconfig
+++ b/arch/powerpc/platforms/powernv/Kconfig
@@ -12,7 +12,6 @@ config PPC_POWERNV
 	select EPAPR_BOOT
 	select PPC_INDIRECT_PIO
 	select PPC_UDBG_16550
-	select PPC_SCOM
 	select ARCH_RANDOM
 	select CPU_FREQ
 	select PPC_DOORBELL
@@ -47,3 +46,7 @@ config PPC_VAS
 	  VAS adapters are found in POWER9 based systems.
 
 	  If unsure, say N.
+
+config SCOM_DEBUGFS
+	bool "Expose SCOM controllers via debugfs"
+	depends on DEBUG_FS
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index da2e99efbd04..4b1644150135 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -4,12 +4,12 @@ obj-y			+= idle.o opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o
 obj-y			+= rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o
 obj-y			+= opal-msglog.o opal-hmi.o opal-power.o opal-irqchip.o
 obj-y			+= opal-kmsg.o opal-powercap.o opal-psr.o opal-sensor-groups.o
+obj-y			+= opal-xscom.o scom.o
 
 obj-$(CONFIG_SMP)	+= smp.o subcore.o subcore-asm.o
 obj-$(CONFIG_PCI)	+= pci.o pci-ioda.o npu-dma.o pci-ioda-tce.o
 obj-$(CONFIG_CXL_BASE)	+= pci-cxl.o
 obj-$(CONFIG_EEH)	+= eeh-powernv.o
-obj-$(CONFIG_PPC_SCOM)	+= opal-xscom.o
 obj-$(CONFIG_MEMORY_FAILURE)	+= opal-memory-errors.o
 obj-$(CONFIG_OPAL_PRD)	+= opal-prd.o
 obj-$(CONFIG_PERF_EVENTS) += opal-imc.o
diff --git a/arch/powerpc/platforms/powernv/opal-xscom.c b/arch/powerpc/platforms/powernv/opal-xscom.c
index 22d5e1110dbb..66337d92cb63 100644
--- a/arch/powerpc/platforms/powernv/opal-xscom.c
+++ b/arch/powerpc/platforms/powernv/opal-xscom.c
@@ -18,7 +18,8 @@
 #include <asm/machdep.h>
 #include <asm/firmware.h>
 #include <asm/opal.h>
-#include <asm/scom.h>
+
+#include "scom.h"
 
 /*
  * We could probably fit that inside the scom_map_t
diff --git a/arch/powerpc/sysdev/scom.c b/arch/powerpc/platforms/powernv/scom.c
similarity index 99%
rename from arch/powerpc/sysdev/scom.c
rename to arch/powerpc/platforms/powernv/scom.c
index a707b24a7ddb..50c019d2ef45 100644
--- a/arch/powerpc/sysdev/scom.c
+++ b/arch/powerpc/platforms/powernv/scom.c
@@ -23,9 +23,10 @@
 #include <linux/export.h>
 #include <asm/debugfs.h>
 #include <asm/prom.h>
-#include <asm/scom.h>
 #include <linux/uaccess.h>
 
+#include "scom.h"
+
 const struct scom_controller *scom_controller;
 EXPORT_SYMBOL_GPL(scom_controller);
 
diff --git a/arch/powerpc/include/asm/scom.h b/arch/powerpc/platforms/powernv/scom.h
similarity index 95%
rename from arch/powerpc/include/asm/scom.h
rename to arch/powerpc/platforms/powernv/scom.h
index f5cde45b1161..b14fe0edf95b 100644
--- a/arch/powerpc/include/asm/scom.h
+++ b/arch/powerpc/platforms/powernv/scom.h
@@ -18,12 +18,8 @@
  *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
 
-#ifndef _ASM_POWERPC_SCOM_H
-#define _ASM_POWERPC_SCOM_H
-
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-#ifdef CONFIG_PPC_SCOM
+#ifndef _SCOM_H
+#define _SCOM_H
 
 /*
  * The SCOM bus is a sideband bus used for accessing various internal
@@ -161,7 +157,4 @@ static inline int scom_write(scom_map_t map, u64 reg, u64 value)
 }
 
 
-#endif /* CONFIG_PPC_SCOM */
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_SCOM_H */
+#endif /* _SCOM_H */
diff --git a/arch/powerpc/sysdev/Kconfig b/arch/powerpc/sysdev/Kconfig
index e0dbec780fe9..7808d279ff1d 100644
--- a/arch/powerpc/sysdev/Kconfig
+++ b/arch/powerpc/sysdev/Kconfig
@@ -28,13 +28,6 @@ config PPC_MSI_BITMAP
 source "arch/powerpc/sysdev/xics/Kconfig"
 source "arch/powerpc/sysdev/xive/Kconfig"
 
-config PPC_SCOM
-	bool
-
-config SCOM_DEBUGFS
-	bool "Expose SCOM controllers via debugfs"
-	depends on PPC_SCOM && DEBUG_FS
-
 config GE_FPGA
 	bool
 
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index aaf23283ba0c..35d52d1d2fc0 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -51,8 +51,6 @@ ifdef CONFIG_SUSPEND
 obj-$(CONFIG_PPC_BOOK3S_32)	+= 6xx-suspend.o
 endif
 
-obj-$(CONFIG_PPC_SCOM)		+= scom.o
-
 obj-$(CONFIG_PPC_EARLY_DEBUG_MEMCONS)	+= udbg_memcons.o
 
 obj-$(CONFIG_PPC_XICS)		+= xics/
-- 
2.20.1


             reply	other threads:[~2019-05-09  5:14 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-09  5:11 Andrew Donnellan [this message]
2019-05-09  5:11 ` [PATCH v2 2/5] powerpc/powernv: Remove dead SCOM access code Andrew Donnellan
2019-05-09  5:11 ` [PATCH v2 3/5] powerpc/powernv: Get rid of old scom_controller abstraction Andrew Donnellan
2019-05-09  5:11 ` [PATCH v2 4/5] powerpc/powernv: Fix checkpatch warnings in opal-xscom.c Andrew Donnellan
2019-05-09  5:11 ` [PATCH v2 5/5] powerpc/configs: Disable SCOM_DEBUGFS in powernv_defconfig Andrew Donnellan
2019-05-09  5:37   ` Nicholas Piggin
2019-05-09  5:53     ` Oliver
2019-05-09  5:54     ` Andrew Donnellan
2019-07-31  1:45       ` Andrew Donnellan
2019-07-31 12:00         ` Michael Ellerman
2019-06-04  2:01 ` [PATCH v2 1/5] powerpc/powernv: Move SCOM access code into powernv platform Andrew Donnellan
2019-07-31 11:37   ` Michael Ellerman
2019-08-10 10:20 ` Michael Ellerman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190509051119.7694-1-ajd@linux.ibm.com \
    --to=ajd@linux.ibm.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).