linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Daniel Baluta <daniel.baluta@nxp.com>
To: broonie@kernel.org
Cc: Daniel Baluta <daniel.baluta@nxp.com>,
	alsa-devel@alsa-project.org, viorel.suman@nxp.com,
	timur@kernel.org, Xiubo.Lee@gmail.com,
	linuxppc-dev@lists.ozlabs.org, shengjiu.wang@nxp.com,
	angus@akkea.ca, tiwai@suse.com, perex@perex.cz,
	nicoleotsuka@gmail.com, linux-imx@nxp.com, kernel@pengutronix.de,
	festevam@gmail.com, linux-kernel@vger.kernel.org,
	l.stach@pengutronix.de
Subject: [PATCH 05/10] ASoC: fsl_sai: Add support to enable multiple data lines
Date: Mon, 22 Jul 2019 15:48:28 +0300	[thread overview]
Message-ID: <20190722124833.28757-6-daniel.baluta@nxp.com> (raw)
In-Reply-To: <20190722124833.28757-1-daniel.baluta@nxp.com>

SAI supports up to 8 Rx/Tx data lines which can be enabled
using TCE/RCE bits of TCR3/RCR3 registers.

Data lines to be enabled are read from DT fsl,dl_mask property.
By default (if no DT entry is provided) only data line 0 is enabled.

Note:
We can only enable consecutive data lines starting with data line #0.

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 sound/soc/fsl/fsl_sai.c | 10 +++++++++-
 sound/soc/fsl/fsl_sai.h |  6 ++++--
 2 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index 768341608695..d0fa02188b7c 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -601,7 +601,7 @@ static int fsl_sai_startup(struct snd_pcm_substream *substream,
 
 	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx),
 			   FSL_SAI_CR3_TRCE_MASK,
-			   FSL_SAI_CR3_TRCE);
+			   FSL_SAI_CR3_TRCE(sai->soc_data->dl_mask[tx]);
 
 	ret = snd_pcm_hw_constraint_list(substream->runtime, 0,
 			SNDRV_PCM_HW_PARAM_RATE, &fsl_sai_rate_constraints);
@@ -887,6 +887,14 @@ static int fsl_sai_probe(struct platform_device *pdev)
 		}
 	}
 
+	/* active data lines mask for TX/RX, defaults to 1 (only the first
+	 * data line is enabled
+	 */
+	sai->dl_mask[RX] = 1;
+	sai->dl_mask[TX] = 1;
+	of_property_read_u32_index(np, "fsl,dl_mask", RX, &sai->dl_mask[RX]);
+	of_property_read_u32_index(np, "fsl,dl_mask", TX, &sai->dl_mask[TX]);
+
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		dev_err(&pdev->dev, "no irq for node %s\n", pdev->name);
diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h
index b1abeed2f78e..6d32f0950ec5 100644
--- a/sound/soc/fsl/fsl_sai.h
+++ b/sound/soc/fsl/fsl_sai.h
@@ -109,8 +109,8 @@
 #define FSL_SAI_CR2_DIV_MASK	0xff
 
 /* SAI Transmit and Receive Configuration 3 Register */
-#define FSL_SAI_CR3_TRCE	BIT(16)
-#define FSL_SAI_CR3_TRCE_MASK	GENMASK(16, 23)
+#define FSL_SAI_CR3_TRCE(x)	((x) << 16)
+#define FSL_SAI_CR3_TRCE_MASK	GENMASK(23, 16)
 #define FSL_SAI_CR3_WDFL(x)	(x)
 #define FSL_SAI_CR3_WDFL_MASK	0x1f
 
@@ -176,6 +176,8 @@ struct fsl_sai {
 	unsigned int slots;
 	unsigned int slot_width;
 
+	unsigned int dl_mask[2];
+
 	const struct fsl_sai_soc_data *soc_data;
 	struct snd_dmaengine_dai_dma_data dma_params_rx;
 	struct snd_dmaengine_dai_dma_data dma_params_tx;
-- 
2.17.1


  parent reply	other threads:[~2019-07-22 12:52 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-22 12:48 [PATCH 00/10] Add support for new SAI IP version Daniel Baluta
2019-07-22 12:48 ` [PATCH 01/10] ASoC: fsl_sai: add of_match data Daniel Baluta
2019-07-23 17:00   ` Mark Brown
2019-07-24  6:42     ` [alsa-devel] " Daniel Baluta
2019-07-24 22:34   ` Nicolin Chen
2019-07-25  6:00     ` [alsa-devel] " Daniel Baluta
2019-07-22 12:48 ` [PATCH 02/10] ASoC: fsl_sai: derive TX FIFO watermark from FIFO depth Daniel Baluta
2019-07-22 12:48 ` [PATCH 03/10] ASoC: fsl_sai: Add registers definition for multiple datalines Daniel Baluta
2019-07-22 12:48 ` [PATCH 04/10] ASoC: fsl_sai: Update Tx/Rx channel enable mask Daniel Baluta
2019-07-22 12:48 ` Daniel Baluta [this message]
2019-07-22 12:55   ` [PATCH 05/10] ASoC: fsl_sai: Add support to enable multiple data lines Lucas Stach
2019-07-24  8:58     ` [alsa-devel] " Daniel Baluta
2019-07-22 12:48 ` [PATCH 06/10] ASoC: dt-bindings: Document dl_mask property Daniel Baluta
2019-07-22 12:56   ` Lucas Stach
2019-07-24 23:13   ` Nicolin Chen
2019-07-25  6:08     ` [alsa-devel] " Daniel Baluta
2019-07-22 12:48 ` [PATCH 07/10] ASoC: fsl_sai: Add support for FIFO combine mode Daniel Baluta
2019-07-22 13:01   ` Lucas Stach
2019-07-22 12:48 ` [PATCH 08/10] ASoC: dt-bindings: Document fcomb_mode property Daniel Baluta
2019-07-24 23:22   ` Nicolin Chen
2019-07-25  6:02     ` [alsa-devel] " Daniel Baluta
2019-07-25 17:39       ` Nicolin Chen
2019-07-22 12:48 ` [PATCH 09/10] ASoC: fsl_sai: Add support for SAI new version Daniel Baluta
2019-07-24 23:32   ` Nicolin Chen
2019-07-25  6:06     ` [alsa-devel] " Daniel Baluta
2019-07-22 12:48 ` [PATCH 10/10] ASoC: fsl_sai: Add support for imx7ulp/imx8mq Daniel Baluta
2019-07-22 13:04   ` Lucas Stach

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190722124833.28757-6-daniel.baluta@nxp.com \
    --to=daniel.baluta@nxp.com \
    --cc=Xiubo.Lee@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=angus@akkea.ca \
    --cc=broonie@kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=l.stach@pengutronix.de \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=nicoleotsuka@gmail.com \
    --cc=perex@perex.cz \
    --cc=shengjiu.wang@nxp.com \
    --cc=timur@kernel.org \
    --cc=tiwai@suse.com \
    --cc=viorel.suman@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).