linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
To: dan.j.williams@intel.com
Cc: linux-mm@kvack.org, linuxppc-dev@lists.ozlabs.org,
	"Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>,
	linux-nvdimm@lists.01.org
Subject: [PATCH v5 1/4] nvdimm: Consider probe return -EOPNOTSUPP as success
Date: Fri,  9 Aug 2019 13:15:17 +0530	[thread overview]
Message-ID: <20190809074520.27115-2-aneesh.kumar@linux.ibm.com> (raw)
In-Reply-To: <20190809074520.27115-1-aneesh.kumar@linux.ibm.com>

This patch add -EOPNOTSUPP as return from probe callback to
indicate we were not able to initialize a namespace due to pfn superblock
feature/version mismatch. We want to consider this a probe success so that
we can create new namesapce seed and there by avoid marking the failed
namespace as the seed namespace.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
 drivers/nvdimm/bus.c  |  2 +-
 drivers/nvdimm/pmem.c | 26 ++++++++++++++++++++++----
 2 files changed, 23 insertions(+), 5 deletions(-)

diff --git a/drivers/nvdimm/bus.c b/drivers/nvdimm/bus.c
index 798c5c4aea9c..16c35e6446a7 100644
--- a/drivers/nvdimm/bus.c
+++ b/drivers/nvdimm/bus.c
@@ -95,7 +95,7 @@ static int nvdimm_bus_probe(struct device *dev)
 	rc = nd_drv->probe(dev);
 	debug_nvdimm_unlock(dev);
 
-	if (rc == 0)
+	if (rc == 0 || rc == -EOPNOTSUPP)
 		nd_region_probe_success(nvdimm_bus, dev);
 	else
 		nd_region_disable(nvdimm_bus, dev);
diff --git a/drivers/nvdimm/pmem.c b/drivers/nvdimm/pmem.c
index 4c121dd03dd9..3f498881dd28 100644
--- a/drivers/nvdimm/pmem.c
+++ b/drivers/nvdimm/pmem.c
@@ -490,6 +490,7 @@ static int pmem_attach_disk(struct device *dev,
 
 static int nd_pmem_probe(struct device *dev)
 {
+	int ret;
 	struct nd_namespace_common *ndns;
 
 	ndns = nvdimm_namespace_common_probe(dev);
@@ -505,12 +506,29 @@ static int nd_pmem_probe(struct device *dev)
 	if (is_nd_pfn(dev))
 		return pmem_attach_disk(dev, ndns);
 
-	/* if we find a valid info-block we'll come back as that personality */
-	if (nd_btt_probe(dev, ndns) == 0 || nd_pfn_probe(dev, ndns) == 0
-			|| nd_dax_probe(dev, ndns) == 0)
+	ret = nd_btt_probe(dev, ndns);
+	if (ret == 0)
 		return -ENXIO;
+	else if (ret == -EOPNOTSUPP)
+		return ret;
 
-	/* ...otherwise we're just a raw pmem device */
+	ret = nd_pfn_probe(dev, ndns);
+	if (ret == 0)
+		return -ENXIO;
+	else if (ret == -EOPNOTSUPP)
+		return ret;
+
+	ret = nd_dax_probe(dev, ndns);
+	if (ret == 0)
+		return -ENXIO;
+	else if (ret == -EOPNOTSUPP)
+		return ret;
+	/*
+	 * We have two failure conditions here, there is no
+	 * info reserver block or we found a valid info reserve block
+	 * but failed to initialize the pfn superblock.
+	 * Don't create a raw pmem disk for the second case.
+	 */
 	return pmem_attach_disk(dev, ndns);
 }
 
-- 
2.21.0


  reply	other threads:[~2019-08-09  7:49 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-09  7:45 [PATCH v5 0/4] Mark the namespace disabled on pfn superblock mismatch Aneesh Kumar K.V
2019-08-09  7:45 ` Aneesh Kumar K.V [this message]
2019-08-14  4:22   ` [PATCH v5 1/4] nvdimm: Consider probe return -EOPNOTSUPP as success Dan Williams
2019-08-15 19:54     ` Dan Williams
2019-08-19  7:05       ` Aneesh Kumar K.V
2019-08-19 16:57         ` Dan Williams
2019-08-09  7:45 ` [PATCH v5 2/4] mm/nvdimm: Add page size and struct page size to pfn superblock Aneesh Kumar K.V
2019-08-09  7:45 ` [PATCH v5 3/4] mm/nvdimm: Use correct #defines instead of open coding Aneesh Kumar K.V
2019-08-15 21:05   ` Dan Williams
2019-08-19  7:11     ` Aneesh Kumar K.V
2019-08-19  9:30       ` Aneesh Kumar K.V
2019-08-19 20:33         ` Dan Williams
2019-08-09  7:45 ` [PATCH v5 4/4] mm/nvdimm: Pick the right alignment default when creating dax devices Aneesh Kumar K.V

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190809074520.27115-2-aneesh.kumar@linux.ibm.com \
    --to=aneesh.kumar@linux.ibm.com \
    --cc=dan.j.williams@intel.com \
    --cc=linux-mm@kvack.org \
    --cc=linux-nvdimm@lists.01.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).