linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
To: <linux-pci@vger.kernel.org>, <linuxppc-dev@lists.ozlabs.org>
Cc: Marta Rybczynska <mrybczyn@kalray.eu>,
	Sergey Miroshnichenko <s.miroshnichenko@yadro.com>,
	Srinath Mannam <srinath.mannam@broadcom.com>,
	Bjorn Helgaas <helgaas@kernel.org>,
	linux@yadro.com
Subject: [PATCH v5 01/23] PCI: Fix race condition in pci_enable/disable_device()
Date: Fri, 16 Aug 2019 19:50:39 +0300	[thread overview]
Message-ID: <20190816165101.911-2-s.miroshnichenko@yadro.com> (raw)
In-Reply-To: <20190816165101.911-1-s.miroshnichenko@yadro.com>

This is a yet another approach to fix an old [1-2] concurrency issue, when:
 - two or more devices are being hot-added into a bridge which was
   initially empty;
 - a bridge with two or more devices is being hot-added;
 - during boot, if BIOS/bootloader/firmware doesn't pre-enable bridges.

The problem is that a bridge is reported as enabled before the MEM/IO bits
are actually written to the PCI_COMMAND register, so another driver thread
starts memory requests through the not-yet-enabled bridge:

 CPU0                                        CPU1

 pci_enable_device_mem()                     pci_enable_device_mem()
   pci_enable_bridge()                         pci_enable_bridge()
     pci_is_enabled()
       return false;
     atomic_inc_return(enable_cnt)
     Start actual enabling the bridge
     ...                                         pci_is_enabled()
     ...                                           return true;
     ...                                     Start memory requests <-- FAIL
     ...
     Set the PCI_COMMAND_MEMORY bit <-- Must wait for this

Protect the pci_enable/disable_device() and pci_enable_bridge(), which is
similar to the previous solution from commit 40f11adc7cd9 ("PCI: Avoid race
while enabling upstream bridges"), but adding a per-device mutexes and
preventing the dev->enable_cnt from from incrementing early.

CC: Srinath Mannam <srinath.mannam@broadcom.com>
CC: Marta Rybczynska <mrybczyn@kalray.eu>
Signed-off-by: Sergey Miroshnichenko <s.miroshnichenko@yadro.com>

[1] https://lore.kernel.org/linux-pci/1501858648-22228-1-git-send-email-srinath.mannam@broadcom.com/T/#u
    [RFC PATCH v3] pci: Concurrency issue during pci enable bridge

[2] https://lore.kernel.org/linux-pci/744877924.5841545.1521630049567.JavaMail.zimbra@kalray.eu/T/#u
    [RFC PATCH] nvme: avoid race-conditions when enabling devices
---
 drivers/pci/pci.c   | 26 ++++++++++++++++++++++----
 drivers/pci/probe.c |  1 +
 include/linux/pci.h |  1 +
 3 files changed, 24 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 1b27b5af3d55..e7f8c354e644 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1645,6 +1645,8 @@ static void pci_enable_bridge(struct pci_dev *dev)
 	struct pci_dev *bridge;
 	int retval;
 
+	mutex_lock(&dev->enable_mutex);
+
 	bridge = pci_upstream_bridge(dev);
 	if (bridge)
 		pci_enable_bridge(bridge);
@@ -1652,6 +1654,7 @@ static void pci_enable_bridge(struct pci_dev *dev)
 	if (pci_is_enabled(dev)) {
 		if (!dev->is_busmaster)
 			pci_set_master(dev);
+		mutex_unlock(&dev->enable_mutex);
 		return;
 	}
 
@@ -1660,11 +1663,14 @@ static void pci_enable_bridge(struct pci_dev *dev)
 		pci_err(dev, "Error enabling bridge (%d), continuing\n",
 			retval);
 	pci_set_master(dev);
+	mutex_unlock(&dev->enable_mutex);
 }
 
 static int pci_enable_device_flags(struct pci_dev *dev, unsigned long flags)
 {
 	struct pci_dev *bridge;
+	/* Enable-locking of bridges is performed within the pci_enable_bridge() */
+	bool need_lock = !dev->subordinate;
 	int err;
 	int i, bars = 0;
 
@@ -1680,8 +1686,13 @@ static int pci_enable_device_flags(struct pci_dev *dev, unsigned long flags)
 		dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
 	}
 
-	if (atomic_inc_return(&dev->enable_cnt) > 1)
+	if (need_lock)
+		mutex_lock(&dev->enable_mutex);
+	if (pci_is_enabled(dev)) {
+		if (need_lock)
+			mutex_unlock(&dev->enable_mutex);
 		return 0;		/* already enabled */
+	}
 
 	bridge = pci_upstream_bridge(dev);
 	if (bridge)
@@ -1696,8 +1707,10 @@ static int pci_enable_device_flags(struct pci_dev *dev, unsigned long flags)
 			bars |= (1 << i);
 
 	err = do_pci_enable_device(dev, bars);
-	if (err < 0)
-		atomic_dec(&dev->enable_cnt);
+	if (err >= 0)
+		atomic_inc(&dev->enable_cnt);
+	if (need_lock)
+		mutex_unlock(&dev->enable_mutex);
 	return err;
 }
 
@@ -1941,15 +1954,20 @@ void pci_disable_device(struct pci_dev *dev)
 	if (dr)
 		dr->enabled = 0;
 
+	mutex_lock(&dev->enable_mutex);
 	dev_WARN_ONCE(&dev->dev, atomic_read(&dev->enable_cnt) <= 0,
 		      "disabling already-disabled device");
 
-	if (atomic_dec_return(&dev->enable_cnt) != 0)
+	if (atomic_dec_return(&dev->enable_cnt) != 0) {
+		mutex_unlock(&dev->enable_mutex);
 		return;
+	}
 
 	do_pci_disable_device(dev);
 
 	dev->is_busmaster = 0;
+
+	mutex_unlock(&dev->enable_mutex);
 }
 EXPORT_SYMBOL(pci_disable_device);
 
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index a3c7338fad86..2e58ece820e8 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -2427,6 +2427,7 @@ struct pci_dev *pci_alloc_dev(struct pci_bus *bus)
 	INIT_LIST_HEAD(&dev->bus_list);
 	dev->dev.type = &pci_dev_type;
 	dev->bus = pci_bus_get(bus);
+	mutex_init(&dev->enable_mutex);
 
 	return dev;
 }
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 9e700d9f9f28..d3a72159722d 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -425,6 +425,7 @@ struct pci_dev {
 	unsigned int	no_vf_scan:1;		/* Don't scan for VFs after IOV enablement */
 	pci_dev_flags_t dev_flags;
 	atomic_t	enable_cnt;	/* pci_enable_device has been called */
+	struct mutex	enable_mutex;
 
 	u32		saved_config_space[16]; /* Config space saved at suspend time */
 	struct hlist_head saved_cap_space;
-- 
2.21.0


  reply	other threads:[~2019-08-16 16:58 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-16 16:50 [PATCH v5 00/23] PCI: Allow BAR movement during hotplug Sergey Miroshnichenko
2019-08-16 16:50 ` Sergey Miroshnichenko [this message]
2019-08-22 12:37   ` [PATCH v5 01/23] PCI: Fix race condition in pci_enable/disable_device() Marta Rybczynska
2019-09-27 21:59   ` Bjorn Helgaas
2019-09-30  8:53     ` Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 02/23] PCI: Enable bridge's I/O and MEM access for hotplugged devices Sergey Miroshnichenko
2019-09-27 22:01   ` Bjorn Helgaas
2019-08-16 16:50 ` [PATCH v5 03/23] PCI: hotplug: Add a flag for the movable BARs feature Sergey Miroshnichenko
2019-09-27 22:02   ` Bjorn Helgaas
2019-09-30  8:44     ` David Laight
2019-09-30 16:17       ` Sergey Miroshnichenko
2019-09-30 12:59     ` Sergey Miroshnichenko
2019-10-15 22:14       ` Bjorn Helgaas
2019-10-16 15:50         ` Sergey Miroshnichenko
2019-10-16 17:29           ` Bjorn Helgaas
2019-08-16 16:50 ` [PATCH v5 04/23] PCI: Define PCI-specific version of the release_child_resources() Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 05/23] PCI: hotplug: movable BARs: Fix reassigning the released bridge windows Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 06/23] PCI: hotplug: movable BARs: Recalculate all bridge windows during rescan Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 07/23] PCI: hotplug: movable BARs: Don't allow added devices to steal resources Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 08/23] PCI: Include fixed and immovable BARs into the bus size calculating Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 09/23] PCI: Prohibit assigning BARs and bridge windows to non-direct parents Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 10/23] PCI: hotplug: movable BARs: Try to assign unassigned resources only once Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 11/23] PCI: hotplug: movable BARs: Calculate immovable parts of bridge windows Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 12/23] PCI: hotplug: movable BARs: Compute limits for relocated " Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 13/23] PCI: Make sure bridge windows include their fixed BARs Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 14/23] PCI: Fix assigning the fixed prefetchable resources Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 15/23] PCI: hotplug: movable BARs: Assign fixed and immovable BARs before others Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 16/23] PCI: hotplug: movable BARs: Don't reserve IO/mem bus space Sergey Miroshnichenko
2019-09-04  5:42   ` Oliver O'Halloran
2019-09-04 11:22     ` Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 17/23] powerpc/pci: Fix crash with enabled movable BARs Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 18/23] powerpc/pci: Handle BAR movement Sergey Miroshnichenko
2019-09-04  5:37   ` Oliver O'Halloran
2019-09-06 16:24     ` Sergey Miroshnichenko
2019-09-09 14:02       ` Oliver O'Halloran
2019-08-16 16:50 ` [PATCH v5 19/23] PCI: hotplug: Configure MPS for hot-added bridges during bus rescan Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 20/23] PCI: hotplug: movable BARs: Enable the feature by default Sergey Miroshnichenko
2019-08-16 16:50 ` [PATCH v5 21/23] nvme-pci: Handle movable BARs Sergey Miroshnichenko
2019-08-16 16:51 ` [PATCH v5 22/23] PCI/portdrv: Declare support of " Sergey Miroshnichenko
2019-08-16 16:51 ` [PATCH v5 23/23] PCI: pciehp: movable BARs: Trigger a domain rescan on hp events Sergey Miroshnichenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190816165101.911-2-s.miroshnichenko@yadro.com \
    --to=s.miroshnichenko@yadro.com \
    --cc=helgaas@kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux@yadro.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mrybczyn@kalray.eu \
    --cc=srinath.mannam@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).