From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH 2/4] powerpc/64s: remove support for kernel-mode syscalls
Date: Tue, 27 Aug 2019 13:30:08 +1000 [thread overview]
Message-ID: <20190827033010.28090-4-npiggin@gmail.com> (raw)
In-Reply-To: <20190827033010.28090-1-npiggin@gmail.com>
There is support for the kernel to execute the 'sc 0' instruction and
make a system call to itself. This is a relic that is unused in the
tree, therefore untested. It's also highly questionable for modules to
be doing this.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kernel/entry_64.S | 21 ++++++---------------
arch/powerpc/kernel/exceptions-64s.S | 2 --
2 files changed, 6 insertions(+), 17 deletions(-)
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 0a0b5310f54a..6467bdab8d40 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -69,24 +69,20 @@ BEGIN_FTR_SECTION
bne .Ltabort_syscall
END_FTR_SECTION_IFSET(CPU_FTR_TM)
#endif
- andi. r10,r12,MSR_PR
mr r10,r1
- addi r1,r1,-INT_FRAME_SIZE
- beq- 1f
ld r1,PACAKSAVE(r13)
-1: std r10,0(r1)
+ std r10,0(r1)
std r11,_NIP(r1)
std r12,_MSR(r1)
std r0,GPR0(r1)
std r10,GPR1(r1)
- beq 2f /* if from kernel mode */
#ifdef CONFIG_PPC_FSL_BOOK3E
START_BTB_FLUSH_SECTION
BTB_FLUSH(r10)
END_BTB_FLUSH_SECTION
#endif
ACCOUNT_CPU_USER_ENTRY(r13, r10, r11)
-2: std r2,GPR2(r1)
+ std r2,GPR2(r1)
std r3,GPR3(r1)
mfcr r2
std r4,GPR4(r1)
@@ -122,14 +118,13 @@ END_BTB_FLUSH_SECTION
#if defined(CONFIG_VIRT_CPU_ACCOUNTING_NATIVE) && defined(CONFIG_PPC_SPLPAR)
BEGIN_FW_FTR_SECTION
- beq 33f
- /* if from user, see if there are any DTL entries to process */
+ /* see if there are any DTL entries to process */
ld r10,PACALPPACAPTR(r13) /* get ptr to VPA */
ld r11,PACA_DTL_RIDX(r13) /* get log read index */
addi r10,r10,LPPACA_DTLIDX
LDX_BE r10,0,r10 /* get log write index */
- cmpd cr1,r11,r10
- beq+ cr1,33f
+ cmpd r11,r10
+ beq+ 33f
bl accumulate_stolen_time
REST_GPR(0,r1)
REST_4GPRS(3,r1)
@@ -203,6 +198,7 @@ system_call: /* label this so stack traces look sane */
mtctr r12
bctrl /* Call handler */
+ /* syscall_exit can exit to kernel mode, via ret_from_kernel_thread */
.Lsyscall_exit:
std r3,RESULT(r1)
@@ -216,11 +212,6 @@ system_call: /* label this so stack traces look sane */
ld r12, PACA_THREAD_INFO(r13)
ld r8,_MSR(r1)
-#ifdef CONFIG_PPC_BOOK3S
- /* No MSR:RI on BookE */
- andi. r10,r8,MSR_RI
- beq- .Lunrecov_restore
-#endif
/*
* This is a few instructions into the actual syscall exit path (which actually
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 6ba3cc2ef8ab..768f133de4f1 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1521,8 +1521,6 @@ EXC_COMMON(trap_0b_common, 0xb00, unknown_exception)
* system call / hypercall (0xc00, 0x4c00)
*
* The system call exception is invoked with "sc 0" and does not alter HV bit.
- * There is support for kernel code to invoke system calls but there are no
- * in-tree users.
*
* The hypercall is invoked with "sc 1" and sets HV=1.
*
--
2.22.0
next prev parent reply other threads:[~2019-08-27 3:37 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-27 3:30 [PATCH 0/4] powerpc/64: syscalls in C Nicholas Piggin
2019-08-27 3:30 ` [PATCH 1/4] powerpc: convert to copy_thread_tls Nicholas Piggin
2019-08-27 6:07 ` Christophe Leroy
2019-08-27 10:13 ` Nicholas Piggin
2019-08-27 14:00 ` Christophe Leroy
2019-09-02 3:29 ` Michael Ellerman
2019-08-27 3:30 ` [PATCH 2/4] powerpc/64: remove support for kernel-mode syscalls Nicholas Piggin
2019-08-27 6:13 ` Christophe Leroy
2019-08-27 10:20 ` Nicholas Piggin
2019-08-27 10:41 ` Nicholas Piggin
2019-08-27 3:30 ` Nicholas Piggin [this message]
2019-08-27 6:14 ` [PATCH 2/4] powerpc/64s: " Christophe Leroy
2019-08-27 10:21 ` Nicholas Piggin
2019-08-27 3:30 ` [PATCH 3/4] powerpc/64: system call remove non-volatile GPR save optimisation Nicholas Piggin
2019-08-27 8:10 ` Segher Boessenkool
2019-08-27 3:30 ` [PATCH 4/4] powerpc/64: system call implement the bulk of the logic in C Nicholas Piggin
2019-08-27 6:46 ` Christophe Leroy
2019-08-27 10:30 ` Nicholas Piggin
2019-08-27 14:35 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190827033010.28090-4-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).