From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v2 04/20] powerpc/64s/exception: Expand EXC_COMMON and EXC_COMMON_ASYNC macros
Date: Wed, 4 Sep 2019 21:55:19 +1000 [thread overview]
Message-ID: <20190904115535.18559-5-npiggin@gmail.com> (raw)
In-Reply-To: <20190904115535.18559-1-npiggin@gmail.com>
These don't provide a large amount of code sharing. Removing them
makes code easier to shuffle around. For example, some of the common
instructions will be moved into the common code gen macro.
No generated code change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kernel/exceptions-64s.S | 160 ++++++++++++++++++++-------
1 file changed, 117 insertions(+), 43 deletions(-)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 0e39e98ef719..828fa4df15cf 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -757,28 +757,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
#define FINISH_NAP
#endif
-#define EXC_COMMON(name, realvec, hdlr) \
- EXC_COMMON_BEGIN(name); \
- INT_COMMON realvec, PACA_EXGEN, 1, 1, 1, 0, 0 ; \
- bl save_nvgprs; \
- addi r3,r1,STACK_FRAME_OVERHEAD; \
- bl hdlr; \
- b ret_from_except
-
-/*
- * Like EXC_COMMON, but for exceptions that can occur in the idle task and
- * therefore need the special idle handling (finish nap and runlatch)
- */
-#define EXC_COMMON_ASYNC(name, realvec, hdlr) \
- EXC_COMMON_BEGIN(name); \
- INT_COMMON realvec, PACA_EXGEN, 1, 1, 1, 0, 0 ; \
- FINISH_NAP; \
- RUNLATCH_ON; \
- addi r3,r1,STACK_FRAME_OVERHEAD; \
- bl hdlr; \
- b ret_from_except_lite
-
-
/*
* There are a few constraints to be concerned with.
* - Real mode exceptions code/data must be located at their physical location.
@@ -1349,7 +1327,13 @@ EXC_VIRT_BEGIN(hardware_interrupt, 0x4500, 0x100)
INT_HANDLER hardware_interrupt, 0x500, virt=1, hsrr=EXC_HV_OR_STD, bitmask=IRQS_DISABLED, kvm=1
EXC_VIRT_END(hardware_interrupt, 0x4500, 0x100)
INT_KVM_HANDLER hardware_interrupt, 0x500, EXC_HV_OR_STD, PACA_EXGEN, 0
-EXC_COMMON_ASYNC(hardware_interrupt_common, 0x500, do_IRQ)
+EXC_COMMON_BEGIN(hardware_interrupt_common)
+ INT_COMMON 0x500, PACA_EXGEN, 1, 1, 1, 0, 0
+ FINISH_NAP
+ RUNLATCH_ON
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl do_IRQ
+ b ret_from_except_lite
EXC_REAL_BEGIN(alignment, 0x600, 0x100)
@@ -1455,7 +1439,13 @@ EXC_VIRT_BEGIN(decrementer, 0x4900, 0x80)
INT_HANDLER decrementer, 0x900, virt=1, bitmask=IRQS_DISABLED
EXC_VIRT_END(decrementer, 0x4900, 0x80)
INT_KVM_HANDLER decrementer, 0x900, EXC_STD, PACA_EXGEN, 0
-EXC_COMMON_ASYNC(decrementer_common, 0x900, timer_interrupt)
+EXC_COMMON_BEGIN(decrementer_common)
+ INT_COMMON 0x900, PACA_EXGEN, 1, 1, 1, 0, 0
+ FINISH_NAP
+ RUNLATCH_ON
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl timer_interrupt
+ b ret_from_except_lite
EXC_REAL_BEGIN(hdecrementer, 0x980, 0x80)
@@ -1465,7 +1455,12 @@ EXC_VIRT_BEGIN(hdecrementer, 0x4980, 0x80)
INT_HANDLER hdecrementer, 0x980, virt=1, hsrr=EXC_HV, kvm=1
EXC_VIRT_END(hdecrementer, 0x4980, 0x80)
INT_KVM_HANDLER hdecrementer, 0x980, EXC_HV, PACA_EXGEN, 0
-EXC_COMMON(hdecrementer_common, 0x980, hdec_interrupt)
+EXC_COMMON_BEGIN(hdecrementer_common)
+ INT_COMMON 0x980, PACA_EXGEN, 1, 1, 1, 0, 0
+ bl save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl hdec_interrupt
+ b ret_from_except
EXC_REAL_BEGIN(doorbell_super, 0xa00, 0x100)
@@ -1475,11 +1470,17 @@ EXC_VIRT_BEGIN(doorbell_super, 0x4a00, 0x100)
INT_HANDLER doorbell_super, 0xa00, virt=1, bitmask=IRQS_DISABLED
EXC_VIRT_END(doorbell_super, 0x4a00, 0x100)
INT_KVM_HANDLER doorbell_super, 0xa00, EXC_STD, PACA_EXGEN, 0
+EXC_COMMON_BEGIN(doorbell_super_common)
+ INT_COMMON 0xa00, PACA_EXGEN, 1, 1, 1, 0, 0
+ FINISH_NAP
+ RUNLATCH_ON
+ addi r3,r1,STACK_FRAME_OVERHEAD
#ifdef CONFIG_PPC_DOORBELL
-EXC_COMMON_ASYNC(doorbell_super_common, 0xa00, doorbell_exception)
+ bl doorbell_exception
#else
-EXC_COMMON_ASYNC(doorbell_super_common, 0xa00, unknown_exception)
+ bl unknown_exception
#endif
+ b ret_from_except_lite
EXC_REAL_NONE(0xb00, 0x100)
@@ -1623,7 +1624,12 @@ EXC_VIRT_BEGIN(single_step, 0x4d00, 0x100)
INT_HANDLER single_step, 0xd00, virt=1
EXC_VIRT_END(single_step, 0x4d00, 0x100)
INT_KVM_HANDLER single_step, 0xd00, EXC_STD, PACA_EXGEN, 0
-EXC_COMMON(single_step_common, 0xd00, single_step_exception)
+EXC_COMMON_BEGIN(single_step_common)
+ INT_COMMON 0xd00, PACA_EXGEN, 1, 1, 1, 0, 0
+ bl save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl single_step_exception
+ b ret_from_except
EXC_REAL_BEGIN(h_data_storage, 0xe00, 0x20)
@@ -1654,7 +1660,12 @@ EXC_VIRT_BEGIN(h_instr_storage, 0x4e20, 0x20)
INT_HANDLER h_instr_storage, 0xe20, ool=1, virt=1, hsrr=EXC_HV, kvm=1
EXC_VIRT_END(h_instr_storage, 0x4e20, 0x20)
INT_KVM_HANDLER h_instr_storage, 0xe20, EXC_HV, PACA_EXGEN, 0
-EXC_COMMON(h_instr_storage_common, 0xe20, unknown_exception)
+EXC_COMMON_BEGIN(h_instr_storage_common)
+ INT_COMMON 0xe20, PACA_EXGEN, 1, 1, 1, 0, 0
+ bl save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl unknown_exception
+ b ret_from_except
EXC_REAL_BEGIN(emulation_assist, 0xe40, 0x20)
@@ -1664,7 +1675,12 @@ EXC_VIRT_BEGIN(emulation_assist, 0x4e40, 0x20)
INT_HANDLER emulation_assist, 0xe40, ool=1, virt=1, hsrr=EXC_HV, kvm=1
EXC_VIRT_END(emulation_assist, 0x4e40, 0x20)
INT_KVM_HANDLER emulation_assist, 0xe40, EXC_HV, PACA_EXGEN, 0
-EXC_COMMON(emulation_assist_common, 0xe40, emulation_assist_interrupt)
+EXC_COMMON_BEGIN(emulation_assist_common)
+ INT_COMMON 0xe40, PACA_EXGEN, 1, 1, 1, 0, 0
+ bl save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl emulation_assist_interrupt
+ b ret_from_except
/*
@@ -1721,11 +1737,17 @@ EXC_VIRT_BEGIN(h_doorbell, 0x4e80, 0x20)
INT_HANDLER h_doorbell, 0xe80, ool=1, virt=1, hsrr=EXC_HV, bitmask=IRQS_DISABLED, kvm=1
EXC_VIRT_END(h_doorbell, 0x4e80, 0x20)
INT_KVM_HANDLER h_doorbell, 0xe80, EXC_HV, PACA_EXGEN, 0
+EXC_COMMON_BEGIN(h_doorbell_common)
+ INT_COMMON 0xe80, PACA_EXGEN, 1, 1, 1, 0, 0
+ FINISH_NAP
+ RUNLATCH_ON
+ addi r3,r1,STACK_FRAME_OVERHEAD
#ifdef CONFIG_PPC_DOORBELL
-EXC_COMMON_ASYNC(h_doorbell_common, 0xe80, doorbell_exception)
+ bl doorbell_exception
#else
-EXC_COMMON_ASYNC(h_doorbell_common, 0xe80, unknown_exception)
+ bl unknown_exception
#endif
+ b ret_from_except_lite
EXC_REAL_BEGIN(h_virt_irq, 0xea0, 0x20)
@@ -1735,7 +1757,13 @@ EXC_VIRT_BEGIN(h_virt_irq, 0x4ea0, 0x20)
INT_HANDLER h_virt_irq, 0xea0, ool=1, virt=1, hsrr=EXC_HV, bitmask=IRQS_DISABLED, kvm=1
EXC_VIRT_END(h_virt_irq, 0x4ea0, 0x20)
INT_KVM_HANDLER h_virt_irq, 0xea0, EXC_HV, PACA_EXGEN, 0
-EXC_COMMON_ASYNC(h_virt_irq_common, 0xea0, do_IRQ)
+EXC_COMMON_BEGIN(h_virt_irq_common)
+ INT_COMMON 0xea0, PACA_EXGEN, 1, 1, 1, 0, 0
+ FINISH_NAP
+ RUNLATCH_ON
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl do_IRQ
+ b ret_from_except_lite
EXC_REAL_NONE(0xec0, 0x20)
@@ -1751,7 +1779,13 @@ EXC_VIRT_BEGIN(performance_monitor, 0x4f00, 0x20)
INT_HANDLER performance_monitor, 0xf00, ool=1, virt=1, bitmask=IRQS_PMI_DISABLED
EXC_VIRT_END(performance_monitor, 0x4f00, 0x20)
INT_KVM_HANDLER performance_monitor, 0xf00, EXC_STD, PACA_EXGEN, 0
-EXC_COMMON_ASYNC(performance_monitor_common, 0xf00, performance_monitor_exception)
+EXC_COMMON_BEGIN(performance_monitor_common)
+ INT_COMMON 0xf00, PACA_EXGEN, 1, 1, 1, 0, 0
+ FINISH_NAP
+ RUNLATCH_ON
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl performance_monitor_exception
+ b ret_from_except_lite
EXC_REAL_BEGIN(altivec_unavailable, 0xf20, 0x20)
@@ -1842,7 +1876,12 @@ EXC_VIRT_BEGIN(facility_unavailable, 0x4f60, 0x20)
INT_HANDLER facility_unavailable, 0xf60, ool=1, virt=1
EXC_VIRT_END(facility_unavailable, 0x4f60, 0x20)
INT_KVM_HANDLER facility_unavailable, 0xf60, EXC_STD, PACA_EXGEN, 0
-EXC_COMMON(facility_unavailable_common, 0xf60, facility_unavailable_exception)
+EXC_COMMON_BEGIN(facility_unavailable_common)
+ INT_COMMON 0xf60, PACA_EXGEN, 1, 1, 1, 0, 0
+ bl save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl facility_unavailable_exception
+ b ret_from_except
EXC_REAL_BEGIN(h_facility_unavailable, 0xf80, 0x20)
@@ -1852,7 +1891,12 @@ EXC_VIRT_BEGIN(h_facility_unavailable, 0x4f80, 0x20)
INT_HANDLER h_facility_unavailable, 0xf80, ool=1, virt=1, hsrr=EXC_HV, kvm=1
EXC_VIRT_END(h_facility_unavailable, 0x4f80, 0x20)
INT_KVM_HANDLER h_facility_unavailable, 0xf80, EXC_HV, PACA_EXGEN, 0
-EXC_COMMON(h_facility_unavailable_common, 0xf80, facility_unavailable_exception)
+EXC_COMMON_BEGIN(h_facility_unavailable_common)
+ INT_COMMON 0xf80, PACA_EXGEN, 1, 1, 1, 0, 0
+ bl save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl facility_unavailable_exception
+ b ret_from_except
EXC_REAL_NONE(0xfa0, 0x20)
@@ -1873,7 +1917,12 @@ EXC_REAL_BEGIN(cbe_system_error, 0x1200, 0x100)
EXC_REAL_END(cbe_system_error, 0x1200, 0x100)
EXC_VIRT_NONE(0x5200, 0x100)
INT_KVM_HANDLER cbe_system_error, 0x1200, EXC_HV, PACA_EXGEN, 1
-EXC_COMMON(cbe_system_error_common, 0x1200, cbe_system_error_exception)
+EXC_COMMON_BEGIN(cbe_system_error_common)
+ INT_COMMON 0x1200, PACA_EXGEN, 1, 1, 1, 0, 0
+ bl save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl cbe_system_error_exception
+ b ret_from_except
#else /* CONFIG_CBE_RAS */
EXC_REAL_NONE(0x1200, 0x100)
EXC_VIRT_NONE(0x5200, 0x100)
@@ -1887,7 +1936,12 @@ EXC_VIRT_BEGIN(instruction_breakpoint, 0x5300, 0x100)
INT_HANDLER instruction_breakpoint, 0x1300, virt=1
EXC_VIRT_END(instruction_breakpoint, 0x5300, 0x100)
INT_KVM_HANDLER instruction_breakpoint, 0x1300, EXC_STD, PACA_EXGEN, 1
-EXC_COMMON(instruction_breakpoint_common, 0x1300, instruction_breakpoint_exception)
+EXC_COMMON_BEGIN(instruction_breakpoint_common)
+ INT_COMMON 0x1300, PACA_EXGEN, 1, 1, 1, 0, 0
+ bl save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl instruction_breakpoint_exception
+ b ret_from_except
EXC_REAL_NONE(0x1400, 0x100)
@@ -1987,7 +2041,12 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
b .
#endif
-EXC_COMMON(denorm_common, 0x1500, unknown_exception)
+EXC_COMMON_BEGIN(denorm_common)
+ INT_COMMON 0x1500, PACA_EXGEN, 1, 1, 1, 0, 0
+ bl save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl unknown_exception
+ b ret_from_except
#ifdef CONFIG_CBE_RAS
@@ -1996,7 +2055,12 @@ EXC_REAL_BEGIN(cbe_maintenance, 0x1600, 0x100)
EXC_REAL_END(cbe_maintenance, 0x1600, 0x100)
EXC_VIRT_NONE(0x5600, 0x100)
INT_KVM_HANDLER cbe_maintenance, 0x1600, EXC_HV, PACA_EXGEN, 1
-EXC_COMMON(cbe_maintenance_common, 0x1600, cbe_maintenance_exception)
+EXC_COMMON_BEGIN(cbe_maintenance_common)
+ INT_COMMON 0x1600, PACA_EXGEN, 1, 1, 1, 0, 0
+ bl save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl cbe_maintenance_exception
+ b ret_from_except
#else /* CONFIG_CBE_RAS */
EXC_REAL_NONE(0x1600, 0x100)
EXC_VIRT_NONE(0x5600, 0x100)
@@ -2010,11 +2074,16 @@ EXC_VIRT_BEGIN(altivec_assist, 0x5700, 0x100)
INT_HANDLER altivec_assist, 0x1700, virt=1
EXC_VIRT_END(altivec_assist, 0x5700, 0x100)
INT_KVM_HANDLER altivec_assist, 0x1700, EXC_STD, PACA_EXGEN, 0
+EXC_COMMON_BEGIN(altivec_assist_common)
+ INT_COMMON 0x1700, PACA_EXGEN, 1, 1, 1, 0, 0
+ bl save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
#ifdef CONFIG_ALTIVEC
-EXC_COMMON(altivec_assist_common, 0x1700, altivec_assist_exception)
+ bl altivec_assist_exception
#else
-EXC_COMMON(altivec_assist_common, 0x1700, unknown_exception)
+ bl unknown_exception
#endif
+ b ret_from_except
#ifdef CONFIG_CBE_RAS
@@ -2023,7 +2092,12 @@ EXC_REAL_BEGIN(cbe_thermal, 0x1800, 0x100)
EXC_REAL_END(cbe_thermal, 0x1800, 0x100)
EXC_VIRT_NONE(0x5800, 0x100)
INT_KVM_HANDLER cbe_thermal, 0x1800, EXC_HV, PACA_EXGEN, 1
-EXC_COMMON(cbe_thermal_common, 0x1800, cbe_thermal_exception)
+EXC_COMMON_BEGIN(cbe_thermal_common)
+ INT_COMMON 0x1800, PACA_EXGEN, 1, 1, 1, 0, 0
+ bl save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl cbe_thermal_exception
+ b ret_from_except
#else /* CONFIG_CBE_RAS */
EXC_REAL_NONE(0x1800, 0x100)
EXC_VIRT_NONE(0x5800, 0x100)
--
2.22.0
next prev parent reply other threads:[~2019-09-04 12:08 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-04 11:55 [PATCH v2 00/20] remaining interrupt handler changes Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 01/20] powerpc/64s/exception: Introduce INT_DEFINE parameter block for code generation Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 02/20] powerpc/64s/exception: Add GEN_COMMON macro that uses INT_DEFINE parameters Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 03/20] powerpc/64s/exception: Add GEN_KVM " Nicholas Piggin
2019-09-04 11:55 ` Nicholas Piggin [this message]
2019-09-04 11:55 ` [PATCH v2 05/20] powerpc/64s/exception: Move all interrupt handlers to new style code gen macros Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 06/20] powerpc/64s/exception: Remove old INT_ENTRY macro Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 07/20] powerpc/64s/exception: Remove old INT_COMMON macro Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 08/20] powerpc/64s/exception: Remove old INT_KVM_HANDLER Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 09/20] powerpc/64s/exception: Add ISIDE option Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 10/20] powerpc/64s/exception: move real->virt switch into the common handler Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 11/20] powerpc/64s/exception: move soft-mask test to common code Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 12/20] powerpc/64s/exception: move KVM " Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 13/20] powerpc/64s/exception: remove confusing IEARLY option Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 14/20] powerpc/64s/exception: remove the SPR saving patch code macros Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 15/20] powerpc/64s/exception: trim unused arguments from KVMTEST macro Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 16/20] powerpc/64s/exception: hdecrementer avoid touching the stack Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 17/20] powerpc/64s/exception: re-inline some handlers Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 18/20] powerpc/64s/exception: Clean up SRR specifiers Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 19/20] powerpc/64s/exception: add more comments for interrupt handlers Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 20/20] powerpc/64s/exception: only test KVM in SRR interrupts when PR KVM is supported Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190904115535.18559-5-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).