From: Frederic Barrat <fbarrat@linux.ibm.com>
To: linuxppc-dev@lists.ozlabs.org, andrew.donnellan@au1.ibm.com,
clombard@linux.ibm.com
Cc: groug@kaod.org, alastair@au1.ibm.com
Subject: [PATCH 00/11] opencapi: enable card reset and link retraining
Date: Mon, 9 Sep 2019 17:45:49 +0200 [thread overview]
Message-ID: <20190909154600.19917-1-fbarrat@linux.ibm.com> (raw)
This is the linux part of the work to use the PCI hotplug framework to
control an opencapi card so that it can be reset and re-read after
flashing a new FPGA image. I had posted it earlier as an RFC and this
version is mostly similar, with just some minor editing.
It needs support in skiboot:
http://patchwork.ozlabs.org/project/skiboot/list/?series=129724
On an old skiboot, it will do nothing.
A virtual PCI slot is created for the opencapi adapter, and its state
can be controlled through the pnv-php hotplug driver:
echo 0|1 > /sys/bus/pci/slots/OPENCAPI-<...>/power
Note that the power to the card is not really turned off, as the card
needs to stay on to be flashed with a new image. Instead the card is
in reset.
The first part of the series mostly deals with the pci/ioda state, as
the opencapi devices can now go away and the state needs to be cleaned
up.
The second part is modifications to the PCI hotplug driver on powernv,
so that a virtual slot is created for the opencapi adapters found in
the device tree.
Frederic Barrat (11):
powerpc/powernv/ioda: Fix ref count for devices with their own PE
powerpc/powernv/ioda: Protect PE list
powerpc/powernv/ioda: set up PE on opencapi device when enabling
powerpc/powernv/ioda: Release opencapi device
powerpc/powernv/ioda: Find opencapi slot for a device node
pci/hotplug/pnv-php: Remove erroneous warning
pci/hotplug/pnv-php: Improve error msg on power state change failure
pci/hotplug/pnv-php: Register opencapi slots
pci/hotplug/pnv-php: Relax check when disabling slot
pci/hotplug/pnv-php: Wrap warnings in macro
ocxl: Add PCI hotplug dependency to Kconfig
arch/powerpc/include/asm/pnv-pci.h | 1 +
arch/powerpc/platforms/powernv/pci-ioda.c | 107 ++++++++++++++--------
arch/powerpc/platforms/powernv/pci.c | 10 +-
drivers/misc/ocxl/Kconfig | 1 +
drivers/pci/hotplug/pnv_php.c | 82 ++++++++++-------
5 files changed, 125 insertions(+), 76 deletions(-)
--
2.21.0
next reply other threads:[~2019-09-09 15:55 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-09 15:45 Frederic Barrat [this message]
2019-09-09 15:45 ` [PATCH 01/11] powerpc/powernv/ioda: Fix ref count for devices with their own PE Frederic Barrat
2019-09-10 0:20 ` Alastair D'Silva
2019-09-26 16:44 ` Andrew Donnellan
2019-09-26 17:15 ` Frederic Barrat
2019-09-27 6:54 ` Alexey Kardashevskiy
2019-11-12 17:38 ` Frederic Barrat
2019-11-18 1:04 ` Alistair Popple
2019-11-18 1:24 ` Oliver O'Halloran
2019-11-18 2:36 ` Alistair Popple
2019-11-18 18:21 ` Frederic Barrat
2019-09-09 15:45 ` [PATCH 02/11] powerpc/powernv/ioda: Protect PE list Frederic Barrat
2019-09-10 0:34 ` Alastair D'Silva
2019-11-19 12:55 ` Frederic Barrat
2019-11-19 13:22 ` Oliver O'Halloran
2019-11-19 14:36 ` Frederic Barrat
2019-11-19 5:55 ` Andrew Donnellan
2019-09-09 15:45 ` [PATCH 03/11] powerpc/powernv/ioda: set up PE on opencapi device when enabling Frederic Barrat
2019-09-10 0:38 ` Alastair D'Silva
2019-09-27 16:43 ` Andrew Donnellan
2019-09-09 15:45 ` [PATCH 04/11] powerpc/powernv/ioda: Release opencapi device Frederic Barrat
2019-09-10 0:56 ` Alastair D'Silva
2019-11-19 17:32 ` Frederic Barrat
2019-11-19 7:08 ` Andrew Donnellan
2019-09-09 15:45 ` [PATCH 05/11] powerpc/powernv/ioda: Find opencapi slot for a device node Frederic Barrat
2019-09-10 0:57 ` Alastair D'Silva
2019-11-19 1:26 ` Andrew Donnellan
2019-11-19 14:33 ` Frederic Barrat
2019-09-09 15:45 ` [PATCH 06/11] pci/hotplug/pnv-php: Remove erroneous warning Frederic Barrat
2019-09-10 0:58 ` Alastair D'Silva
2019-11-19 5:00 ` Andrew Donnellan
2019-09-09 15:45 ` [PATCH 07/11] pci/hotplug/pnv-php: Improve error msg on power state change failure Frederic Barrat
2019-09-10 0:59 ` Alastair D'Silva
2019-11-19 2:23 ` Andrew Donnellan
2019-09-09 15:45 ` [PATCH 08/11] pci/hotplug/pnv-php: Register opencapi slots Frederic Barrat
2019-09-10 1:00 ` Alastair D'Silva
2019-11-19 5:18 ` Andrew Donnellan
2019-11-19 15:15 ` Frederic Barrat
2019-09-09 15:45 ` [PATCH 09/11] pci/hotplug/pnv-php: Relax check when disabling slot Frederic Barrat
2019-09-10 1:00 ` Alastair D'Silva
2019-09-27 15:56 ` Andrew Donnellan
2019-09-09 15:45 ` [PATCH 10/11] pci/hotplug/pnv-php: Wrap warnings in macro Frederic Barrat
2019-09-10 1:03 ` Alastair D'Silva
2019-09-26 17:18 ` Andrew Donnellan
2019-09-09 15:46 ` [PATCH 11/11] ocxl: Add PCI hotplug dependency to Kconfig Frederic Barrat
2019-09-10 1:03 ` Alastair D'Silva
2019-09-26 17:11 ` Andrew Donnellan
2019-09-24 4:24 ` [PATCH 00/11] opencapi: enable card reset and link retraining Alexey Kardashevskiy
2019-09-24 6:39 ` Frederic Barrat
2019-09-25 0:20 ` Alexey Kardashevskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190909154600.19917-1-fbarrat@linux.ibm.com \
--to=fbarrat@linux.ibm.com \
--cc=alastair@au1.ibm.com \
--cc=andrew.donnellan@au1.ibm.com \
--cc=clombard@linux.ibm.com \
--cc=groug@kaod.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).