LinuxPPC-Dev Archive on lore.kernel.org
 help / color / Atom feed
From: Nayna Jain <nayna@linux.ibm.com>
To: linuxppc-dev@ozlabs.org, linux-efi@vger.kernel.org,
	linux-integrity@vger.kernel.org
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>,
	Eric Ricther <erichte@linux.ibm.com>,
	Nayna Jain <nayna@linux.ibm.com>,
	linux-kernel@vger.kernel.org, Mimi Zohar <zohar@linux.ibm.com>,
	Claudio Carvalho <cclaudio@linux.ibm.com>,
	Matthew Garret <matthew.garret@nebula.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Paul Mackerras <paulus@samba.org>, Jeremy Kerr <jk@ozlabs.org>,
	Elaine Palmer <erpalmer@us.ibm.com>,
	Oliver O'Halloran <oohall@gmail.com>,
	George Wilson <gcwilson@linux.ibm.com>
Subject: [PATCH v8 2/4] powerpc: expose secure variables to userspace via sysfs
Date: Sat,  9 Nov 2019 13:00:30 -0600
Message-ID: <20191109190032.96259-3-nayna@linux.ibm.com> (raw)
In-Reply-To: <20191109190032.96259-1-nayna@linux.ibm.com>

PowerNV secure variables, which store the keys used for OS kernel
verification, are managed by the firmware. These secure variables need to
be accessed by the userspace for addition/deletion of the certificates.

This patch adds the sysfs interface to expose secure variables for PowerNV
secureboot. The users shall use this interface for manipulating
the keys stored in the secure variables.

Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Eric Richter <erichte@linux.ibm.com>
---
 Documentation/ABI/testing/sysfs-secvar |  46 +++++
 arch/powerpc/Kconfig                   |  11 ++
 arch/powerpc/kernel/Makefile           |   1 +
 arch/powerpc/kernel/secvar-sysfs.c     | 248 +++++++++++++++++++++++++
 4 files changed, 306 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-secvar
 create mode 100644 arch/powerpc/kernel/secvar-sysfs.c

diff --git a/Documentation/ABI/testing/sysfs-secvar b/Documentation/ABI/testing/sysfs-secvar
new file mode 100644
index 000000000000..911b89cc6957
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-secvar
@@ -0,0 +1,46 @@
+What:		/sys/firmware/secvar
+Date:		August 2019
+Contact:	Nayna Jain <nayna@linux.ibm.com>
+Description:	This directory is created if the POWER firmware supports OS
+		secureboot, thereby secure variables. It exposes interface
+		for reading/writing the secure variables
+
+What:		/sys/firmware/secvar/vars
+Date:		August 2019
+Contact:	Nayna Jain <nayna@linux.ibm.com>
+Description:	This directory lists all the secure variables that are supported
+		by the firmware.
+
+What:		/sys/firmware/secvar/backend
+Date:		August 2019
+Contact:	Nayna Jain <nayna@linux.ibm.com>
+Description:	A string indicating which backend is in use by the firmware.
+		This determines the format of the variable and the accepted
+		format of variable updates.
+
+What:		/sys/firmware/secvar/vars/<variable name>
+Date:		August 2019
+Contact:	Nayna Jain <nayna@linux.ibm.com>
+Description:	Each secure variable is represented as a directory named as
+		<variable_name>. The variable name is unique and is in ASCII
+		representation. The data and size can be determined by reading
+		their respective attribute files.
+
+What:		/sys/firmware/secvar/vars/<variable_name>/size
+Date:		August 2019
+Contact:	Nayna Jain <nayna@linux.ibm.com>
+Description:	An integer representation of the size of the content of the
+		variable. In other words, it represents the size of the data.
+
+What:		/sys/firmware/secvar/vars/<variable_name>/data
+Date:		August 2019
+Contact:	Nayna Jain h<nayna@linux.ibm.com>
+Description:	A read-only file containing the value of the variable. The size
+		of the file represents the maximum size of the variable data.
+
+What:		/sys/firmware/secvar/vars/<variable_name>/update
+Date:		August 2019
+Contact:	Nayna Jain <nayna@linux.ibm.com>
+Description:	A write-only file that is used to submit the new value for the
+		variable. The size of the file represents the maximum size of
+		the variable data that can be written.
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index c795039bdc73..cabc091f3fe1 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -945,6 +945,17 @@ config PPC_SECURE_BOOT
 	  to enable OS secure boot on systems that have firmware support for
 	  it. If in doubt say N.
 
+config PPC_SECVAR_SYSFS
+	bool "Enable sysfs interface for POWER secure variables"
+	default y
+	depends on PPC_SECURE_BOOT
+	depends on SYSFS
+	help
+	  POWER secure variables are managed and controlled by firmware.
+	  These variables are exposed to userspace via sysfs to enable
+	  read/write operations on these variables. Say Y if you have
+	  secure boot enabled and want to expose variables to userspace.
+
 endmenu
 
 config ISA_DMA_API
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 3cf26427334f..b216e9f316ee 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -162,6 +162,7 @@ obj-y				+= ucall.o
 endif
 
 obj-$(CONFIG_PPC_SECURE_BOOT)	+= secure_boot.o ima_arch.o secvar-ops.o
+obj-$(CONFIG_PPC_SECVAR_SYSFS)	+= secvar-sysfs.o
 
 # Disable GCOV, KCOV & sanitizers in odd or sensitive code
 GCOV_PROFILE_prom_init.o := n
diff --git a/arch/powerpc/kernel/secvar-sysfs.c b/arch/powerpc/kernel/secvar-sysfs.c
new file mode 100644
index 000000000000..39345edbdecc
--- /dev/null
+++ b/arch/powerpc/kernel/secvar-sysfs.c
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 IBM Corporation <nayna@linux.ibm.com>
+ *
+ * This code exposes secure variables to user via sysfs
+ */
+
+#define pr_fmt(fmt) "secvar-sysfs: "fmt
+
+#include <linux/slab.h>
+#include <linux/compat.h>
+#include <linux/string.h>
+#include <linux/of.h>
+#include <asm/secvar.h>
+
+#define NAME_MAX_SIZE	   1024
+
+static struct kobject *secvar_kobj;
+static struct kset *secvar_kset;
+
+static ssize_t backend_show(struct kobject *kobj, struct kobj_attribute *attr,
+			    char *buf)
+{
+	ssize_t rc = 0;
+	struct device_node *node;
+	const char *compatible;
+
+	node = of_find_node_by_name(NULL, "secvar");
+	if (!of_device_is_available(node))
+		return -ENODEV;
+
+	rc = of_property_read_string(node, "compatible", &compatible);
+	if (rc)
+		return rc;
+
+	rc = sprintf(buf, "%s\n", compatible);
+
+	of_node_put(node);
+
+	return rc;
+}
+
+
+static ssize_t size_show(struct kobject *kobj, struct kobj_attribute *attr,
+			 char *buf)
+{
+	uint64_t dsize;
+	int rc;
+
+	rc = secvar_ops->get(kobj->name, strlen(kobj->name) + 1, NULL, &dsize);
+	if (rc) {
+		pr_err("Error retrieving %s variable size %d\n", kobj->name,
+		       rc);
+		return rc;
+	}
+
+	return sprintf(buf, "%llu\n", dsize);
+}
+
+static ssize_t data_read(struct file *filep, struct kobject *kobj,
+			 struct bin_attribute *attr, char *buf, loff_t off,
+			 size_t count)
+{
+	uint64_t dsize;
+	char *data;
+	int rc;
+
+	rc = secvar_ops->get(kobj->name, strlen(kobj->name) + 1, NULL, &dsize);
+	if (rc) {
+		pr_err("Error getting %s variable size %d\n", kobj->name, rc);
+		return rc;
+	}
+	pr_debug("dsize is %llu\n", dsize);
+
+	data = kzalloc(dsize, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	rc = secvar_ops->get(kobj->name, strlen(kobj->name) + 1, data, &dsize);
+	if (rc) {
+		pr_err("Error getting %s variable %d\n", kobj->name, rc);
+		goto data_fail;
+	}
+
+	rc = memory_read_from_buffer(buf, count, &off, data, dsize);
+
+data_fail:
+	kfree(data);
+	return rc;
+}
+
+static ssize_t update_write(struct file *filep, struct kobject *kobj,
+			    struct bin_attribute *attr, char *buf, loff_t off,
+			    size_t count)
+{
+	int rc;
+
+	pr_debug("count is %ld\n", count);
+	rc = secvar_ops->set(kobj->name, strlen(kobj->name) + 1, buf, count);
+	if (rc) {
+		pr_err("Error setting the %s variable %d\n", kobj->name, rc);
+		return rc;
+	}
+
+	return count;
+}
+
+static struct kobj_attribute backend_attr = __ATTR_RO(backend);
+
+static struct kobj_attribute size_attr = __ATTR_RO(size);
+
+static struct bin_attribute data_attr = __BIN_ATTR_RO(data, 0);
+
+static struct bin_attribute update_attr = __BIN_ATTR_WO(update, 0);
+
+static struct bin_attribute *secvar_bin_attrs[] = {
+	&data_attr,
+	&update_attr,
+	NULL,
+};
+
+static struct attribute *secvar_attrs[] = {
+	&size_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group secvar_attr_group = {
+	.attrs = secvar_attrs,
+	.bin_attrs = secvar_bin_attrs,
+};
+__ATTRIBUTE_GROUPS(secvar_attr);
+
+static struct kobj_type secvar_ktype = {
+	.sysfs_ops	= &kobj_sysfs_ops,
+	.default_groups = secvar_attr_groups,
+};
+
+static int update_kobj_size(void)
+{
+
+	struct device_node *node;
+	u64 varsize;
+	int rc = 0;
+
+	node = of_find_compatible_node(NULL, NULL, "ibm,edk2-compat-v1");
+	if (!of_device_is_available(node)) {
+		rc = -ENODEV;
+		goto out;
+	}
+
+	rc = of_property_read_u64(node, "max-var-size", &varsize);
+	if (rc)
+		goto out;
+
+	data_attr.size = varsize;
+	update_attr.size = varsize;
+
+out:
+	of_node_put(node);
+
+	return rc;
+}
+
+static int secvar_sysfs_load(void)
+{
+	char *name;
+	uint64_t namesize = 0;
+	struct kobject *kobj;
+	int rc;
+
+	name = kzalloc(NAME_MAX_SIZE, GFP_KERNEL);
+	if (!name)
+		return -ENOMEM;
+
+	do {
+		rc = secvar_ops->get_next(name, &namesize, NAME_MAX_SIZE);
+		if (rc) {
+			if (rc != -ENOENT)
+				pr_err("error getting secvar from firmware %d\n",
+				       rc);
+			break;
+		}
+
+		kobj = kzalloc(sizeof(*kobj), GFP_KERNEL);
+		if (!kobj) {
+			rc = -ENOMEM;
+			break;
+		}
+
+		kobject_init(kobj, &secvar_ktype);
+
+		rc = kobject_add(kobj, &secvar_kset->kobj, "%s", name);
+		if (rc) {
+			pr_warn("kobject_add error %d for attribute: %s\n", rc,
+				name);
+			kobject_put(kobj);
+			kobj = NULL;
+		}
+
+		if (kobj)
+			kobject_uevent(kobj, KOBJ_ADD);
+
+	} while (!rc);
+
+	kfree(name);
+	return rc;
+}
+
+static int secvar_sysfs_init(void)
+{
+	int rc;
+
+	if (!secvar_ops) {
+		pr_warn("secvar: failed to retrieve secvar operations.\n");
+		return -ENODEV;
+	}
+
+	secvar_kobj = kobject_create_and_add("secvar", firmware_kobj);
+	if (!secvar_kobj) {
+		pr_err("secvar: Failed to create firmware kobj\n");
+		return -ENOMEM;
+	}
+
+	rc = sysfs_create_file(secvar_kobj, &backend_attr.attr);
+	if (rc) {
+		kobject_put(secvar_kobj);
+		return -ENOMEM;
+	}
+
+	secvar_kset = kset_create_and_add("vars", NULL, secvar_kobj);
+	if (!secvar_kset) {
+		pr_err("secvar: sysfs kobject registration failed.\n");
+		kobject_put(secvar_kobj);
+		return -ENOMEM;
+	}
+
+	rc = update_kobj_size();
+	if (rc) {
+		pr_err("Cannot read the size of the attribute\n");
+		return rc;
+	}
+
+	secvar_sysfs_load();
+
+	return 0;
+}
+
+late_initcall(secvar_sysfs_init);
-- 
2.20.1


  parent reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-09 19:00 [PATCH v8 0/4] powerpc: expose secure variables to the kernel and userspace Nayna Jain
2019-11-09 19:00 ` [PATCH v8 1/4] powerpc/powernv: Add OPAL API interface to access secure variable Nayna Jain
2019-11-09 19:00 ` Nayna Jain [this message]
2019-11-09 19:00 ` [PATCH v8 3/4] x86/efi: move common keyring handler functions to new file Nayna Jain
2019-11-09 19:00 ` [PATCH v8 4/4] powerpc: load firmware trusted keys/hashes into kernel keyring Nayna Jain

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191109190032.96259-3-nayna@linux.ibm.com \
    --to=nayna@linux.ibm.com \
    --cc=ard.biesheuvel@linaro.org \
    --cc=cclaudio@linux.ibm.com \
    --cc=erichte@linux.ibm.com \
    --cc=erpalmer@us.ibm.com \
    --cc=gcwilson@linux.ibm.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jk@ozlabs.org \
    --cc=linux-efi@vger.kernel.org \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=matthew.garret@nebula.com \
    --cc=oohall@gmail.com \
    --cc=paulus@samba.org \
    --cc=zohar@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LinuxPPC-Dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linuxppc-dev/0 linuxppc-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linuxppc-dev linuxppc-dev/ https://lore.kernel.org/linuxppc-dev \
		linuxppc-dev@lists.ozlabs.org linuxppc-dev@ozlabs.org
	public-inbox-index linuxppc-dev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.ozlabs.lists.linuxppc-dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git