[PATCH AUTOSEL 4.9 043/251] ASoC: imx-sgtl5000: put of nodes if finding codec fails

[PATCH AUTOSEL 4.9 043/251] ASoC: imx-sgtl5000: put of nodes if finding codec fails

[Sasha Levin]

From: Stefan Agner <stefan@agner.ch>

[ Upstream commit d9866572486802bc598a3e8576a5231378d190de ]

Make sure to properly put the of node in case finding the codec
fails.

Fixes: 81e8e4926167 ("ASoC: fsl: add sgtl5000 clock support for imx-sgtl5000")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/imx-sgtl5000.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c
index 8e525f7ac08d..3d99a8579c99 100644
--- a/sound/soc/fsl/imx-sgtl5000.c
+++ b/sound/soc/fsl/imx-sgtl5000.c
@@ -119,7 +119,8 @@ static int imx_sgtl5000_probe(struct platform_device *pdev)
 	codec_dev = of_find_i2c_device_by_node(codec_np);
 	if (!codec_dev) {
 		dev_err(&pdev->dev, "failed to find codec platform device\n");
-		return -EPROBE_DEFER;
+		ret = -EPROBE_DEFER;
+		goto fail;
 	}
 
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
-- 
2.20.1

[PATCH AUTOSEL 4.9 110/251] soc/fsl/qe: Fix an error code in qe_pin_request()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 5674a92ca4b7e5a6a19231edd10298d30324cd27 ]

We forgot to set "err" on this error path.

Fixes: 1a2d397a6eb5 ("gpio/powerpc: Eliminate duplication of of_get_named_gpio_flags()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/fsl/qe/gpio.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/soc/fsl/qe/gpio.c b/drivers/soc/fsl/qe/gpio.c
index 0aaf429f31d5..b5a7107a9c0a 100644
--- a/drivers/soc/fsl/qe/gpio.c
+++ b/drivers/soc/fsl/qe/gpio.c
@@ -152,8 +152,10 @@ struct qe_pin *qe_pin_request(struct device_node *np, int index)
 	if (err < 0)
 		goto err0;
 	gc = gpio_to_chip(err);
-	if (WARN_ON(!gc))
+	if (WARN_ON(!gc)) {
+		err = -ENODEV;
 		goto err0;
+	}
 
 	if (!of_device_is_compatible(gc->of_node, "fsl,mpc8323-qe-pario-bank")) {
 		pr_debug("%s: tried to get a non-qe pin\n", __func__);
-- 
2.20.1

[PATCH AUTOSEL 4.9 117/251] powerpc: vdso: Make vdso32 installation conditional in vdso_install

[Sasha Levin]

From: Ben Hutchings <ben@decadent.org.uk>

[ Upstream commit ff6d27823f619892ab96f7461764840e0d786b15 ]

The 32-bit vDSO is not needed and not normally built for 64-bit
little-endian configurations.  However, the vdso_install target still
builds and installs it.  Add the same config condition as is normally
used for the build.

Fixes: e0d005916994 ("powerpc/vdso: Disable building the 32-bit VDSO ...")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/Makefile | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index a60c9c6e5cc1..de29b88c0e70 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -373,7 +373,9 @@ vdso_install:
 ifeq ($(CONFIG_PPC64),y)
 	$(Q)$(MAKE) $(build)=arch/$(ARCH)/kernel/vdso64 $@
 endif
+ifdef CONFIG_VDSO32
 	$(Q)$(MAKE) $(build)=arch/$(ARCH)/kernel/vdso32 $@
+endif
 
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
-- 
2.20.1

[PATCH AUTOSEL 4.9 152/251] powerpc/cacheinfo: add cacheinfo_teardown, cacheinfo_rebuild

[Sasha Levin]

From: Nathan Lynch <nathanl@linux.ibm.com>

[ Upstream commit d4aa219a074a5abaf95a756b9f0d190b5c03a945 ]

Allow external callers to force the cacheinfo code to release all its
references to cache nodes, e.g. before processing device tree updates
post-migration, and to rebuild the hierarchy afterward.

CPU online/offline must be blocked by callers; enforce this.

Fixes: 410bccf97881 ("powerpc/pseries: Partition migration in the kernel")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/cacheinfo.c | 21 +++++++++++++++++++++
 arch/powerpc/kernel/cacheinfo.h |  4 ++++
 2 files changed, 25 insertions(+)

diff --git a/arch/powerpc/kernel/cacheinfo.c b/arch/powerpc/kernel/cacheinfo.c
index c641983bbdd6..0122d5ce0637 100644
--- a/arch/powerpc/kernel/cacheinfo.c
+++ b/arch/powerpc/kernel/cacheinfo.c
@@ -867,4 +867,25 @@ void cacheinfo_cpu_offline(unsigned int cpu_id)
 	if (cache)
 		cache_cpu_clear(cache, cpu_id);
 }
+
+void cacheinfo_teardown(void)
+{
+	unsigned int cpu;
+
+	lockdep_assert_cpus_held();
+
+	for_each_online_cpu(cpu)
+		cacheinfo_cpu_offline(cpu);
+}
+
+void cacheinfo_rebuild(void)
+{
+	unsigned int cpu;
+
+	lockdep_assert_cpus_held();
+
+	for_each_online_cpu(cpu)
+		cacheinfo_cpu_online(cpu);
+}
+
 #endif /* (CONFIG_PPC_PSERIES && CONFIG_SUSPEND) || CONFIG_HOTPLUG_CPU */
diff --git a/arch/powerpc/kernel/cacheinfo.h b/arch/powerpc/kernel/cacheinfo.h
index a7b74d36acd7..2cdee87a482c 100644
--- a/arch/powerpc/kernel/cacheinfo.h
+++ b/arch/powerpc/kernel/cacheinfo.h
@@ -5,4 +5,8 @@
 extern void cacheinfo_cpu_online(unsigned int cpu_id);
 extern void cacheinfo_cpu_offline(unsigned int cpu_id);
 
+/* Allow migration/suspend to tear down and rebuild the hierarchy. */
+extern void cacheinfo_teardown(void);
+extern void cacheinfo_rebuild(void);
+
 #endif /* _PPC_CACHEINFO_H */
-- 
2.20.1

[PATCH AUTOSEL 4.9 159/251] perf/ioctl: Add check for the sample_period value

[Sasha Levin]

From: Ravi Bangoria <ravi.bangoria@linux.ibm.com>

[ Upstream commit 913a90bc5a3a06b1f04c337320e9aeee2328dd77 ]

perf_event_open() limits the sample_period to 63 bits. See:

  0819b2e30ccb ("perf: Limit perf_event_attr::sample_period to 63 bits")

Make ioctl() consistent with it.

Also on PowerPC, negative sample_period could cause a recursive
PMIs leading to a hang (reported when running perf-fuzzer).

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: maddy@linux.vnet.ibm.com
Cc: mpe@ellerman.id.au
Fixes: 0819b2e30ccb ("perf: Limit perf_event_attr::sample_period to 63 bits")
Link: https://lkml.kernel.org/r/20190604042953.914-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/core.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/kernel/events/core.c b/kernel/events/core.c
index 5bbf7537a612..64ace5e9af2a 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -4624,6 +4624,9 @@ static int perf_event_period(struct perf_event *event, u64 __user *arg)
 	if (perf_event_check_period(event, value))
 		return -EINVAL;
 
+	if (!event->attr.freq && (value & (1ULL << 63)))
+		return -EINVAL;
+
 	event_function_call(event, __perf_event_period, &value);
 
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 4.9 174/251] ALSA: aoa: onyx: always initialize register read value

[Sasha Levin]

From: Johannes Berg <johannes@sipsolutions.net>

[ Upstream commit f474808acb3c4b30552d9c59b181244e0300d218 ]

A lot of places in the driver use onyx_read_register() without
checking the return value, and it's been working OK for ~10 years
or so, so probably never fails ... Rather than trying to check the
return value everywhere, which would be relatively intrusive, at
least make sure we don't use an uninitialized value.

Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/aoa/codecs/onyx.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/aoa/codecs/onyx.c b/sound/aoa/codecs/onyx.c
index a04edff8b729..ae50d59fb810 100644
--- a/sound/aoa/codecs/onyx.c
+++ b/sound/aoa/codecs/onyx.c
@@ -74,8 +74,10 @@ static int onyx_read_register(struct onyx *onyx, u8 reg, u8 *value)
 		return 0;
 	}
 	v = i2c_smbus_read_byte_data(onyx->i2c, reg);
-	if (v < 0)
+	if (v < 0) {
+		*value = 0;
 		return -1;
+	}
 	*value = (u8)v;
 	onyx->cache[ONYX_REG_CONTROL-FIRSTREGISTER] = *value;
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 4.9 246/251] powerpc/powernv: Disable native PCIe port management

[Sasha Levin]

From: Oliver O'Halloran <oohall@gmail.com>

[ Upstream commit 9d72dcef891030545f39ad386a30cf91df517fb2 ]

On PowerNV the PCIe topology is (currently) managed by the powernv platform
code in Linux in cooperation with the platform firmware. Linux's native
PCIe port service drivers operate independently of both and this can cause
problems.

The main issue is that the portbus driver will conflict with the platform
specific hotplug driver (pnv_php) over ownership of the MSI used to notify
the host when a hotplug event occurs. The portbus driver claims this MSI on
behalf of the individual port services because the same interrupt is used
for hotplug events, PMEs (on root ports), and link bandwidth change
notifications. The portbus driver will always claim the interrupt even if
the individual port service drivers, such as pciehp, are compiled out.

The second, bigger, problem is that the hotplug port service driver
fundamentally does not work on PowerNV. The platform assumes that all
PCI devices have a corresponding arch-specific handle derived from the DT
node for the device (pci_dn) and without one the platform will not allow
a PCI device to be enabled. This problem is largely due to historical
baggage, but it can't be resolved without significant re-factoring of the
platform PCI support.

We can fix these problems in the interim by setting the
"pcie_ports_disabled" flag during platform initialisation. The flag
indicates the platform owns the PCIe ports which stops the portbus driver
from being registered.

This does have the side effect of disabling all port services drivers
that is: AER, PME, BW notifications, hotplug, and DPC. However, this is
not a huge disadvantage on PowerNV since these services are either unused
or handled through other means.

Fixes: 66725152fb9f ("PCI/hotplug: PowerPC PowerNV PCI hotplug driver")
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191118065553.30362-1-oohall@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/powernv/pci.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 98cc8ba07c23..00dbf1e895a9 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -923,6 +923,23 @@ void __init pnv_pci_init(void)
 	if (!firmware_has_feature(FW_FEATURE_OPAL))
 		return;
 
+#ifdef CONFIG_PCIEPORTBUS
+	/*
+	 * On PowerNV PCIe devices are (currently) managed in cooperation
+	 * with firmware. This isn't *strictly* required, but there's enough
+	 * assumptions baked into both firmware and the platform code that
+	 * it's unwise to allow the portbus services to be used.
+	 *
+	 * We need to fix this eventually, but for now set this flag to disable
+	 * the portbus driver. The AER service isn't required since that AER
+	 * events are handled via EEH. The pciehp hotplug driver can't work
+	 * without kernel changes (and portbus binding breaks pnv_php). The
+	 * other services also require some thinking about how we're going
+	 * to integrate them.
+	 */
+	pcie_ports_disabled = true;
+#endif
+
 	/* Look for IODA IO-Hubs. */
 	for_each_compatible_node(np, NULL, "ibm,ioda-hub") {
 		pnv_pci_init_ioda_hub(np);
-- 
2.20.1

[PATCH AUTOSEL 4.9 250/251] powerpc/archrandom: fix arch_get_random_seed_int()

[Sasha Levin]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit b6afd1234cf93aa0d71b4be4788c47534905f0be ]

Commit 01c9348c7620ec65

  powerpc: Use hardware RNG for arch_get_random_seed_* not arch_get_random_*

updated arch_get_random_[int|long]() to be NOPs, and moved the hardware
RNG backing to arch_get_random_seed_[int|long]() instead. However, it
failed to take into account that arch_get_random_int() was implemented
in terms of arch_get_random_long(), and so we ended up with a version
of the former that is essentially a NOP as well.

Fix this by calling arch_get_random_seed_long() from
arch_get_random_seed_int() instead.

Fixes: 01c9348c7620ec65 ("powerpc: Use hardware RNG for arch_get_random_seed_* not arch_get_random_*")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191204115015.18015-1-ardb@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/archrandom.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/archrandom.h b/arch/powerpc/include/asm/archrandom.h
index 85e88f7a59c0..9ff848e3c4a6 100644
--- a/arch/powerpc/include/asm/archrandom.h
+++ b/arch/powerpc/include/asm/archrandom.h
@@ -27,7 +27,7 @@ static inline int arch_get_random_seed_int(unsigned int *v)
 	unsigned long val;
 	int rc;
 
-	rc = arch_get_random_long(&val);
+	rc = arch_get_random_seed_long(&val);
 	if (rc)
 		*v = val;
 
-- 
2.20.1