LinuxPPC-Dev Archive on lore.kernel.org
 help / color / Atom feed
From: Christoph Hellwig <hch@infradead.org>
To: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: sachinp <sachinp@linux.vnet.ibm.com>,
	Chaitra P B <chaitra.basappa@broadcom.com>,
	linux-scsi <linux-scsi@vger.kernel.org>,
	MPT-FusionLinux.pdl@broadcom.com,
	manvanth <manvanth@linux.vnet.ibm.com>,
	Sathya Prakash <sathya.prakash@broadcom.com>,
	Christoph Hellwig <hch@infradead.org>,
	jcmvbkbc@gmail.com, iommu@lists.linux-foundation.org,
	linux-next <linux-next@vger.kernel.org>,
	Oliver <oohall@gmail.com>,
	"aneesh.kumar" <aneesh.kumar@linux.vnet.ibm.com>,
	Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>,
	Brian King <brking@linux.vnet.ibm.com>,
	linuxppc-dev <linuxppc-dev@lists.ozlabs.org>
Subject: Re: [linux-next/mainline][bisected 3acac06][ppc] Oops when unloading mpt3sas driver
Date: Thu, 16 Jan 2020 09:44:43 -0800
Message-ID: <20200116174443.GA30158@infradead.org> (raw)
In-Reply-To: <1578980874.11996.3.camel@abdul.in.ibm.com>

Hi Abdul,

I think the problem is that mpt3sas has some convoluted logic to do
some DMA allocations with a 32-bit coherent mask, and then switches
to a 63 or 64 bit mask, which is not supported by the DMA API.

Can you try the patch below?

---
From 0738b1704ed528497b41b0408325f6828a8e51f6 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Thu, 16 Jan 2020 18:31:38 +0100
Subject: mpt3sas: don't change the dma coherent mask after allocations

The DMA layer does not allow changing the DMA coherent mask after
there are outstanding allocations.  Stop doing that and always
use a 32-bit coherent DMA mask in mpt3sas.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/scsi/mpt3sas/mpt3sas_base.c | 67 ++++++++---------------------
 drivers/scsi/mpt3sas/mpt3sas_base.h |  2 -
 2 files changed, 19 insertions(+), 50 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index fea3cb6a090b..3b51bed05008 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -2706,58 +2706,38 @@ _base_build_sg_ieee(struct MPT3SAS_ADAPTER *ioc, void *psge,
 static int
 _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev)
 {
-	u64 required_mask, coherent_mask;
 	struct sysinfo s;
-	/* Set 63 bit DMA mask for all SAS3 and SAS35 controllers */
-	int dma_mask = (ioc->hba_mpi_version_belonged > MPI2_VERSION) ? 63 : 64;
-
-	if (ioc->is_mcpu_endpoint)
-		goto try_32bit;
+	int dma_mask;
 
-	required_mask = dma_get_required_mask(&pdev->dev);
-	if (sizeof(dma_addr_t) == 4 || required_mask == 32)
-		goto try_32bit;
-
-	if (ioc->dma_mask)
-		coherent_mask = DMA_BIT_MASK(dma_mask);
+	if (ioc->is_mcpu_endpoint ||
+	    sizeof(dma_addr_t) == 4 ||
+	    dma_get_required_mask(&pdev->dev) <= 32)
+		dma_mask = 32;
+	/* Set 63 bit DMA mask for all SAS3 and SAS35 controllers */
+	else if (ioc->hba_mpi_version_belonged > MPI2_VERSION)
+		dma_mask = 63;
 	else
-		coherent_mask = DMA_BIT_MASK(32);
+		dma_mask = 64;
 
 	if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(dma_mask)) ||
-	    dma_set_coherent_mask(&pdev->dev, coherent_mask))
-		goto try_32bit;
-
-	ioc->base_add_sg_single = &_base_add_sg_single_64;
-	ioc->sge_size = sizeof(Mpi2SGESimple64_t);
-	ioc->dma_mask = dma_mask;
-	goto out;
-
- try_32bit:
-	if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)))
+	    dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)))
 		return -ENODEV;
 
-	ioc->base_add_sg_single = &_base_add_sg_single_32;
-	ioc->sge_size = sizeof(Mpi2SGESimple32_t);
-	ioc->dma_mask = 32;
- out:
+	if (dma_mask > 32) {
+		ioc->base_add_sg_single = &_base_add_sg_single_64;
+		ioc->sge_size = sizeof(Mpi2SGESimple64_t);
+	} else {
+		ioc->base_add_sg_single = &_base_add_sg_single_32;
+		ioc->sge_size = sizeof(Mpi2SGESimple32_t);
+	}
+
 	si_meminfo(&s);
 	ioc_info(ioc, "%d BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (%ld kB)\n",
-		 ioc->dma_mask, convert_to_kb(s.totalram));
+		 dma_mask, convert_to_kb(s.totalram));
 
 	return 0;
 }
 
-static int
-_base_change_consistent_dma_mask(struct MPT3SAS_ADAPTER *ioc,
-				      struct pci_dev *pdev)
-{
-	if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(ioc->dma_mask))) {
-		if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))
-			return -ENODEV;
-	}
-	return 0;
-}
-
 /**
  * _base_check_enable_msix - checks MSIX capabable.
  * @ioc: per adapter object
@@ -5030,14 +5010,6 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc)
 		total_sz += sz;
 	} while (ioc->rdpq_array_enable && (++i < ioc->reply_queue_count));
 
-	if (ioc->dma_mask > 32) {
-		if (_base_change_consistent_dma_mask(ioc, ioc->pdev) != 0) {
-			ioc_warn(ioc, "no suitable consistent DMA mask for %s\n",
-				 pci_name(ioc->pdev));
-			goto out;
-		}
-	}
-
 	ioc->scsiio_depth = ioc->hba_queue_depth -
 	    ioc->hi_priority_depth - ioc->internal_depth;
 
@@ -6965,7 +6937,6 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 	ioc->smp_affinity_enable = smp_affinity_enable;
 
 	ioc->rdpq_array_enable_assigned = 0;
-	ioc->dma_mask = 0;
 	if (ioc->is_aero_ioc)
 		ioc->base_readl = &_base_readl_aero;
 	else
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index faca0a5e71f8..e57cade1155c 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -1011,7 +1011,6 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc);
  * @ir_firmware: IR firmware present
  * @bars: bitmask of BAR's that must be configured
  * @mask_interrupts: ignore interrupt
- * @dma_mask: used to set the consistent dma mask
  * @pci_access_mutex: Mutex to synchronize ioctl, sysfs show path and
  *			pci resource handling
  * @fault_reset_work_q_name: fw fault work queue
@@ -1185,7 +1184,6 @@ struct MPT3SAS_ADAPTER {
 	u8		ir_firmware;
 	int		bars;
 	u8		mask_interrupts;
-	int		dma_mask;
 
 	/* fw fault handler */
 	char		fault_reset_work_q_name[20];
-- 
2.24.1


  parent reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-08 13:18 Abdul Haleem
2020-01-09  8:57 ` Abdul Haleem
2020-01-09 14:22   ` Christoph Hellwig
2020-01-14  5:47     ` Abdul Haleem
2020-01-16  6:42       ` Michael Ellerman
2020-01-16 17:44       ` Christoph Hellwig [this message]
2020-01-17 12:51         ` Abdul Haleem

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200116174443.GA30158@infradead.org \
    --to=hch@infradead.org \
    --cc=MPT-FusionLinux.pdl@broadcom.com \
    --cc=abdhalee@linux.vnet.ibm.com \
    --cc=aneesh.kumar@linux.vnet.ibm.com \
    --cc=brking@linux.vnet.ibm.com \
    --cc=chaitra.basappa@broadcom.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jcmvbkbc@gmail.com \
    --cc=linux-next@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=manvanth@linux.vnet.ibm.com \
    --cc=oohall@gmail.com \
    --cc=sachinp@linux.vnet.ibm.com \
    --cc=sathya.prakash@broadcom.com \
    --cc=suganath-prabu.subramani@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LinuxPPC-Dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linuxppc-dev/0 linuxppc-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linuxppc-dev linuxppc-dev/ https://lore.kernel.org/linuxppc-dev \
		linuxppc-dev@lists.ozlabs.org linuxppc-dev@ozlabs.org
	public-inbox-index linuxppc-dev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.ozlabs.lists.linuxppc-dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git