LinuxPPC-Dev Archive on lore.kernel.org
 help / color / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Sasha Levin <sashal@kernel.org>, Timur Tabi <timur@kernel.org>,
	Rasmus Villemoes <linux@rasmusvillemoes.dk>,
	Li Yang <leoyang.li@nxp.com>,
	linuxppc-dev@lists.ozlabs.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH AUTOSEL 5.4 009/459] soc: fsl: qe: change return type of cpm_muram_alloc() to s32
Date: Fri, 14 Feb 2020 10:54:19 -0500
Message-ID: <20200214160149.11681-9-sashal@kernel.org> (raw)
In-Reply-To: <20200214160149.11681-1-sashal@kernel.org>

From: Rasmus Villemoes <linux@rasmusvillemoes.dk>

[ Upstream commit 800cd6fb76f0ec7711deb72a86c924db1ae42648 ]

There are a number of problems with cpm_muram_alloc() and its
callers. Most callers assign the return value to some variable and
then use IS_ERR_VALUE to check for allocation failure. However, when
that variable is not sizeof(long), this leads to warnings - and it is
indeed broken to do e.g.

  u32 foo = cpm_muram_alloc();
  if (IS_ERR_VALUE(foo))

on a 64-bit platform, since the condition

  foo >= (unsigned long)-ENOMEM

is tautologically false. There are also callers that ignore the
possibility of error, and then there are those that check for error by
comparing the return value to 0...

One could fix that by changing all callers to store the return value
temporarily in an "unsigned long" and test that. However, use of
IS_ERR_VALUE() is error-prone and should be restricted to things which
are inherently long-sized (stuff in pt_regs etc.). Instead, let's aim
for changing to the standard kernel style

  int foo = cpm_muram_alloc();
  if (foo < 0)
    deal_with_it()
  some->where = foo;

Changing the return type from unsigned long to s32 (aka signed int)
doesn't change the value that gets stored into any of the callers'
variables except if the caller was storing the result in a u64 _and_
the allocation failed, so in itself this patch should be a no-op.

Another problem with cpm_muram_alloc() is that it can certainly
validly return 0 - and except if some cpm_muram_alloc_fixed() call
interferes, the very first cpm_muram_alloc() call will return just
that. But that shows that both ucc_slow_free() and ucc_fast_free() are
buggy, since they assume that a value of 0 means "that field was never
allocated". We'll later change cpm_muram_free() to accept (and ignore)
a negative offset, so callers can use a sentinel of -1 instead of 0
and just unconditionally call cpm_muram_free().

Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/fsl/qe/qe_common.c | 29 ++++++++++++++++-------------
 include/soc/fsl/qe/qe.h        | 16 ++++++++--------
 2 files changed, 24 insertions(+), 21 deletions(-)

diff --git a/drivers/soc/fsl/qe/qe_common.c b/drivers/soc/fsl/qe/qe_common.c
index 83e85e61669f5..84c90105e588b 100644
--- a/drivers/soc/fsl/qe/qe_common.c
+++ b/drivers/soc/fsl/qe/qe_common.c
@@ -32,7 +32,7 @@ static phys_addr_t muram_pbase;
 
 struct muram_block {
 	struct list_head head;
-	unsigned long start;
+	s32 start;
 	int size;
 };
 
@@ -110,13 +110,14 @@ int cpm_muram_init(void)
  * @algo: algorithm for alloc.
  * @data: data for genalloc's algorithm.
  *
- * This function returns an offset into the muram area.
+ * This function returns a non-negative offset into the muram area, or
+ * a negative errno on failure.
  */
-static unsigned long cpm_muram_alloc_common(unsigned long size,
-		genpool_algo_t algo, void *data)
+static s32 cpm_muram_alloc_common(unsigned long size,
+				  genpool_algo_t algo, void *data)
 {
 	struct muram_block *entry;
-	unsigned long start;
+	s32 start;
 
 	if (!muram_pool && cpm_muram_init())
 		goto out2;
@@ -137,7 +138,7 @@ static unsigned long cpm_muram_alloc_common(unsigned long size,
 out1:
 	gen_pool_free(muram_pool, start, size);
 out2:
-	return (unsigned long)-ENOMEM;
+	return -ENOMEM;
 }
 
 /*
@@ -145,13 +146,14 @@ static unsigned long cpm_muram_alloc_common(unsigned long size,
  * @size: number of bytes to allocate
  * @align: requested alignment, in bytes
  *
- * This function returns an offset into the muram area.
+ * This function returns a non-negative offset into the muram area, or
+ * a negative errno on failure.
  * Use cpm_dpram_addr() to get the virtual address of the area.
  * Use cpm_muram_free() to free the allocation.
  */
-unsigned long cpm_muram_alloc(unsigned long size, unsigned long align)
+s32 cpm_muram_alloc(unsigned long size, unsigned long align)
 {
-	unsigned long start;
+	s32 start;
 	unsigned long flags;
 	struct genpool_data_align muram_pool_data;
 
@@ -168,7 +170,7 @@ EXPORT_SYMBOL(cpm_muram_alloc);
  * cpm_muram_free - free a chunk of multi-user ram
  * @offset: The beginning of the chunk as returned by cpm_muram_alloc().
  */
-int cpm_muram_free(unsigned long offset)
+int cpm_muram_free(s32 offset)
 {
 	unsigned long flags;
 	int size;
@@ -194,13 +196,14 @@ EXPORT_SYMBOL(cpm_muram_free);
  * cpm_muram_alloc_fixed - reserve a specific region of multi-user ram
  * @offset: offset of allocation start address
  * @size: number of bytes to allocate
- * This function returns an offset into the muram area
+ * This function returns @offset if the area was available, a negative
+ * errno otherwise.
  * Use cpm_dpram_addr() to get the virtual address of the area.
  * Use cpm_muram_free() to free the allocation.
  */
-unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size)
+s32 cpm_muram_alloc_fixed(unsigned long offset, unsigned long size)
 {
-	unsigned long start;
+	s32 start;
 	unsigned long flags;
 	struct genpool_data_fixed muram_pool_data_fixed;
 
diff --git a/include/soc/fsl/qe/qe.h b/include/soc/fsl/qe/qe.h
index c1036d16ed03b..2d35d5db16231 100644
--- a/include/soc/fsl/qe/qe.h
+++ b/include/soc/fsl/qe/qe.h
@@ -98,26 +98,26 @@ static inline void qe_reset(void) {}
 int cpm_muram_init(void);
 
 #if defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE)
-unsigned long cpm_muram_alloc(unsigned long size, unsigned long align);
-int cpm_muram_free(unsigned long offset);
-unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
+s32 cpm_muram_alloc(unsigned long size, unsigned long align);
+int cpm_muram_free(s32 offset);
+s32 cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
 void __iomem *cpm_muram_addr(unsigned long offset);
 unsigned long cpm_muram_offset(void __iomem *addr);
 dma_addr_t cpm_muram_dma(void __iomem *addr);
 #else
-static inline unsigned long cpm_muram_alloc(unsigned long size,
-					    unsigned long align)
+static inline s32 cpm_muram_alloc(unsigned long size,
+				  unsigned long align)
 {
 	return -ENOSYS;
 }
 
-static inline int cpm_muram_free(unsigned long offset)
+static inline int cpm_muram_free(s32 offset)
 {
 	return -ENOSYS;
 }
 
-static inline unsigned long cpm_muram_alloc_fixed(unsigned long offset,
-						  unsigned long size)
+static inline s32 cpm_muram_alloc_fixed(unsigned long offset,
+					unsigned long size)
 {
 	return -ENOSYS;
 }
-- 
2.20.1


       reply index

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20200214160149.11681-1-sashal@kernel.org>
2020-02-14 15:54 ` Sasha Levin [this message]
2020-02-14 15:54 ` [PATCH AUTOSEL 5.4 042/459] powerpc/powernv/iov: Ensure the pdn for VFs always contains a valid PE number Sasha Levin
2020-02-14 15:55 ` [PATCH AUTOSEL 5.4 083/459] powerpc/powernv/ioda: Fix ref count for devices with their own PE Sasha Levin
2020-02-14 15:55 ` [PATCH AUTOSEL 5.4 084/459] powerpc/iov: Move VF pdev fixup into pcibios_fixup_iov() Sasha Levin
2020-02-14 15:55 ` [PATCH AUTOSEL 5.4 088/459] powerpc/papr_scm: Fix leaking 'bus_desc.provider_name' in some paths Sasha Levin
2020-02-14 15:55 ` [PATCH AUTOSEL 5.4 089/459] powerpc/pseries/vio: Fix iommu_table use-after-free refcount warning Sasha Levin
2020-02-14 15:56 ` [PATCH AUTOSEL 5.4 154/459] net/wan/fsl_ucc_hdlc: reject muram offsets above 64K Sasha Levin
2020-02-14 15:58 ` [PATCH AUTOSEL 5.4 230/459] net/wan/fsl_ucc_hdlc: remove set but not used variables 'ut_info' and 'ret' Sasha Levin
2020-02-14 15:58 ` [PATCH AUTOSEL 5.4 263/459] soc: fsl: qe: remove set but not used variable 'mm_gc' Sasha Levin
2020-02-14 15:59 ` [PATCH AUTOSEL 5.4 341/459] KVM: PPC: Remove set but not used variable 'ra', 'rs', 'rt' Sasha Levin
2020-02-14 16:00 ` [PATCH AUTOSEL 5.4 354/459] ide: remove set but not used variable 'hwif' Sasha Levin
2020-02-14 16:00 ` [PATCH AUTOSEL 5.4 381/459] powerpc/ptdump: Fix W+X verification call in mark_rodata_ro() Sasha Levin
2020-02-14 16:00 ` [PATCH AUTOSEL 5.4 382/459] powerpc/ptdump: Only enable PPC_CHECK_WX with STRICT_KERNEL_RWX Sasha Levin
2020-02-14 16:00 ` [PATCH AUTOSEL 5.4 383/459] powerpc/sriov: Remove VF eeh_dev state when disabling SR-IOV Sasha Levin
2020-02-14 16:00 ` [PATCH AUTOSEL 5.4 394/459] PCI/AER: Initialize aer_fifo Sasha Levin
2020-02-14 16:00 ` [PATCH AUTOSEL 5.4 400/459] powerpc/pseries/lparcfg: Fix display of Maximum Memory Sasha Levin
2020-02-14 16:00 ` [PATCH AUTOSEL 5.4 401/459] selftests/eeh: Bump EEH wait time to 60s Sasha Levin
2020-02-14 16:01 ` [PATCH AUTOSEL 5.4 416/459] powerpc/mm: Don't log user reads to 0xffffffff Sasha Levin
2020-02-14 16:01 ` [PATCH AUTOSEL 5.4 430/459] powerpc: Do not consider weak unresolved symbol relocations as bad Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200214160149.11681-9-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@rasmusvillemoes.dk \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=stable@vger.kernel.org \
    --cc=timur@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LinuxPPC-Dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linuxppc-dev/0 linuxppc-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linuxppc-dev linuxppc-dev/ https://lore.kernel.org/linuxppc-dev \
		linuxppc-dev@lists.ozlabs.org linuxppc-dev@ozlabs.org
	public-inbox-index linuxppc-dev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.ozlabs.lists.linuxppc-dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git