linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Russell Currey <ruscur@russell.cc>
To: linuxppc-dev@lists.ozlabs.org
Cc: ajd@linux.ibm.com, kernel-hardening@lists.openwall.com,
	npiggin@gmail.com, Russell Currey <ruscur@russell.cc>,
	dja@axtens.net
Subject: [PATCH v8 7/7] powerpc/32: use set_memory_attr()
Date: Thu,  2 Apr 2020 19:40:52 +1100	[thread overview]
Message-ID: <20200402084053.188537-7-ruscur@russell.cc> (raw)
In-Reply-To: <20200402084053.188537-1-ruscur@russell.cc>

From: Christophe Leroy <christophe.leroy@c-s.fr>

Use set_memory_attr() instead of the PPC32 specific change_page_attr()

change_page_attr() was checking that the address was not mapped by
blocks and was handling highmem, but that's unneeded because the
affected pages can't be in highmem and block mapping verification
is already done by the callers.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[ruscur: rebase on powerpc/merge with Christophe's new patches]
Signed-off-by: Russell Currey <ruscur@russell.cc>
---
v8: Rebase on powerpc/merge

 arch/powerpc/mm/pgtable_32.c | 60 ++++++------------------------------
 1 file changed, 10 insertions(+), 50 deletions(-)

diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index f62de06e3d07..0d9d164fad26 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -23,6 +23,7 @@
 #include <linux/highmem.h>
 #include <linux/memblock.h>
 #include <linux/slab.h>
+#include <linux/set_memory.h>
 
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
@@ -121,64 +122,20 @@ void __init mapin_ram(void)
 	}
 }
 
-static int __change_page_attr_noflush(struct page *page, pgprot_t prot)
-{
-	pte_t *kpte;
-	unsigned long address;
-
-	BUG_ON(PageHighMem(page));
-	address = (unsigned long)page_address(page);
-
-	if (v_block_mapped(address))
-		return 0;
-	kpte = virt_to_kpte(address);
-	if (!kpte)
-		return -EINVAL;
-	__set_pte_at(&init_mm, address, kpte, mk_pte(page, prot), 0);
-
-	return 0;
-}
-
-/*
- * Change the page attributes of an page in the linear mapping.
- *
- * THIS DOES NOTHING WITH BAT MAPPINGS, DEBUG USE ONLY
- */
-static int change_page_attr(struct page *page, int numpages, pgprot_t prot)
-{
-	int i, err = 0;
-	unsigned long flags;
-	struct page *start = page;
-
-	local_irq_save(flags);
-	for (i = 0; i < numpages; i++, page++) {
-		err = __change_page_attr_noflush(page, prot);
-		if (err)
-			break;
-	}
-	wmb();
-	local_irq_restore(flags);
-	flush_tlb_kernel_range((unsigned long)page_address(start),
-			       (unsigned long)page_address(page));
-	return err;
-}
-
 void mark_initmem_nx(void)
 {
-	struct page *page = virt_to_page(_sinittext);
 	unsigned long numpages = PFN_UP((unsigned long)_einittext) -
 				 PFN_DOWN((unsigned long)_sinittext);
 
 	if (v_block_mapped((unsigned long)_stext + 1))
 		mmu_mark_initmem_nx();
 	else
-		change_page_attr(page, numpages, PAGE_KERNEL);
+		set_memory_attr((unsigned long)_sinittext, numpages, PAGE_KERNEL);
 }
 
 #ifdef CONFIG_STRICT_KERNEL_RWX
 void mark_rodata_ro(void)
 {
-	struct page *page;
 	unsigned long numpages;
 
 	if (v_block_mapped((unsigned long)_sinittext)) {
@@ -187,20 +144,18 @@ void mark_rodata_ro(void)
 		return;
 	}
 
-	page = virt_to_page(_stext);
 	numpages = PFN_UP((unsigned long)_etext) -
 		   PFN_DOWN((unsigned long)_stext);
 
-	change_page_attr(page, numpages, PAGE_KERNEL_ROX);
+	set_memory_attr((unsigned long)_stext, numpages, PAGE_KERNEL_ROX);
 	/*
 	 * mark .rodata as read only. Use __init_begin rather than __end_rodata
 	 * to cover NOTES and EXCEPTION_TABLE.
 	 */
-	page = virt_to_page(__start_rodata);
 	numpages = PFN_UP((unsigned long)__init_begin) -
 		   PFN_DOWN((unsigned long)__start_rodata);
 
-	change_page_attr(page, numpages, PAGE_KERNEL_RO);
+	set_memory_attr((unsigned long)__start_rodata, numpages, PAGE_KERNEL_RO);
 
 	// mark_initmem_nx() should have already run by now
 	ptdump_check_wx();
@@ -210,9 +165,14 @@ void mark_rodata_ro(void)
 #ifdef CONFIG_DEBUG_PAGEALLOC
 void __kernel_map_pages(struct page *page, int numpages, int enable)
 {
+	unsigned long addr = (unsigned long)page_address(page);
+
 	if (PageHighMem(page))
 		return;
 
-	change_page_attr(page, numpages, enable ? PAGE_KERNEL : __pgprot(0));
+	if (enable)
+		set_memory_attr(addr, numpages, PAGE_KERNEL);
+	else
+		set_memory_attr(addr, numpages, __pgprot(0));
 }
 #endif /* CONFIG_DEBUG_PAGEALLOC */
-- 
2.26.0


      parent reply	other threads:[~2020-04-02  8:56 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-02  8:40 [PATCH v8 1/7] powerpc/mm: Implement set_memory() routines Russell Currey
2020-04-02  8:40 ` [PATCH v8 2/7] powerpc/kprobes: Mark newly allocated probes as RO Russell Currey
2020-04-02 16:16   ` Naveen N. Rao
2020-04-02 18:48     ` Naveen N. Rao
2020-04-02 23:02       ` Russell Currey
2020-04-03  7:59       ` Russell Currey
2020-04-03  9:36         ` Naveen N. Rao
2020-04-03  9:42           ` Russell Currey
2020-04-03 10:03             ` Naveen N. Rao
2020-04-02  8:40 ` [PATCH v8 3/7] powerpc/mm/ptdump: debugfs handler for W+X checks at runtime Russell Currey
2020-04-02  8:40 ` [PATCH v8 4/7] powerpc: Set ARCH_HAS_STRICT_MODULE_RWX Russell Currey
2020-04-02  8:40 ` [PATCH v8 5/7] powerpc/configs: Enable STRICT_MODULE_RWX in skiroot_defconfig Russell Currey
2020-04-02  8:40 ` [PATCH v8 6/7] powerpc/mm: implement set_memory_attr() Russell Currey
2020-04-02  8:40 ` Russell Currey [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200402084053.188537-7-ruscur@russell.cc \
    --to=ruscur@russell.cc \
    --cc=ajd@linux.ibm.com \
    --cc=dja@axtens.net \
    --cc=kernel-hardening@lists.openwall.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=npiggin@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).