From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v3 18/19] powerpc/64s: runlatch interrupt handling in C
Date: Sun, 29 Nov 2020 00:41:13 +1000 [thread overview]
Message-ID: <20201128144114.944000-19-npiggin@gmail.com> (raw)
In-Reply-To: <20201128144114.944000-1-npiggin@gmail.com>
There is no need for this to be in asm, use the new intrrupt entry wrapper.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/include/asm/interrupt.h | 7 +++++++
arch/powerpc/kernel/exceptions-64s.S | 18 ------------------
2 files changed, 7 insertions(+), 18 deletions(-)
diff --git a/arch/powerpc/include/asm/interrupt.h b/arch/powerpc/include/asm/interrupt.h
index 5da7b0de545e..655fb668e2da 100644
--- a/arch/powerpc/include/asm/interrupt.h
+++ b/arch/powerpc/include/asm/interrupt.h
@@ -6,6 +6,7 @@
#include <linux/hardirq.h>
#include <asm/cputime.h>
#include <asm/ftrace.h>
+#include <asm/runlatch.h>
struct interrupt_state {
#ifdef CONFIG_PPC_BOOK3E_64
@@ -84,6 +85,12 @@ static inline void interrupt_exit_prepare(struct pt_regs *regs, struct interrupt
static inline void interrupt_async_enter_prepare(struct pt_regs *regs, struct interrupt_state *state)
{
+#ifdef CONFIG_PPC_BOOK3S_64
+ if (cpu_has_feature(CPU_FTR_CTRL) &&
+ !test_thread_local_flags(_TLF_RUNLATCH))
+ __ppc64_runlatch_on();
+#endif
+
interrupt_enter_prepare(regs, state);
irq_enter();
}
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index b6d914db01da..e75849a60578 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -692,14 +692,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
ld r1,GPR1(r1)
.endm
-#define RUNLATCH_ON \
-BEGIN_FTR_SECTION \
- ld r3, PACA_THREAD_INFO(r13); \
- ld r4,TI_LOCAL_FLAGS(r3); \
- andi. r0,r4,_TLF_RUNLATCH; \
- beql ppc64_runlatch_on_trampoline; \
-END_FTR_SECTION_IFSET(CPU_FTR_CTRL)
-
/*
* When the idle code in power4_idle puts the CPU into NAP mode,
* it has to do so in a loop, and relies on the external interrupt
@@ -1582,7 +1574,6 @@ EXC_VIRT_END(hardware_interrupt, 0x4500, 0x100)
EXC_COMMON_BEGIN(hardware_interrupt_common)
GEN_COMMON hardware_interrupt
FINISH_NAP
- RUNLATCH_ON
addi r3,r1,STACK_FRAME_OVERHEAD
bl do_IRQ
b interrupt_return
@@ -1768,7 +1759,6 @@ EXC_VIRT_END(decrementer, 0x4900, 0x80)
EXC_COMMON_BEGIN(decrementer_common)
GEN_COMMON decrementer
FINISH_NAP
- RUNLATCH_ON
addi r3,r1,STACK_FRAME_OVERHEAD
bl timer_interrupt
b interrupt_return
@@ -1854,7 +1844,6 @@ EXC_VIRT_END(doorbell_super, 0x4a00, 0x100)
EXC_COMMON_BEGIN(doorbell_super_common)
GEN_COMMON doorbell_super
FINISH_NAP
- RUNLATCH_ON
addi r3,r1,STACK_FRAME_OVERHEAD
#ifdef CONFIG_PPC_DOORBELL
bl doorbell_exception
@@ -2209,7 +2198,6 @@ EXC_COMMON_BEGIN(hmi_exception_early_common)
EXC_COMMON_BEGIN(hmi_exception_common)
GEN_COMMON hmi_exception
FINISH_NAP
- RUNLATCH_ON
addi r3,r1,STACK_FRAME_OVERHEAD
bl handle_hmi_exception
b interrupt_return
@@ -2239,7 +2227,6 @@ EXC_VIRT_END(h_doorbell, 0x4e80, 0x20)
EXC_COMMON_BEGIN(h_doorbell_common)
GEN_COMMON h_doorbell
FINISH_NAP
- RUNLATCH_ON
addi r3,r1,STACK_FRAME_OVERHEAD
#ifdef CONFIG_PPC_DOORBELL
bl doorbell_exception
@@ -2273,7 +2260,6 @@ EXC_VIRT_END(h_virt_irq, 0x4ea0, 0x20)
EXC_COMMON_BEGIN(h_virt_irq_common)
GEN_COMMON h_virt_irq
FINISH_NAP
- RUNLATCH_ON
addi r3,r1,STACK_FRAME_OVERHEAD
bl do_IRQ
b interrupt_return
@@ -2320,7 +2306,6 @@ EXC_VIRT_END(performance_monitor, 0x4f00, 0x20)
EXC_COMMON_BEGIN(performance_monitor_common)
GEN_COMMON performance_monitor
FINISH_NAP
- RUNLATCH_ON
addi r3,r1,STACK_FRAME_OVERHEAD
bl performance_monitor_exception
b interrupt_return
@@ -3035,9 +3020,6 @@ kvmppc_skip_Hinterrupt:
* come here.
*/
-EXC_COMMON_BEGIN(ppc64_runlatch_on_trampoline)
- b __ppc64_runlatch_on
-
USE_FIXED_SECTION(virt_trampolines)
/*
* All code below __end_interrupts is treated as soft-masked. If
--
2.23.0
next prev parent reply other threads:[~2020-11-28 15:14 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-28 14:40 [PATCH v3 00/19] powerpc: interrupt wrappers Nicholas Piggin
2020-11-28 14:40 ` [PATCH v3 01/19] powerpc/64s: move the last of the page fault handling logic to C Nicholas Piggin
2020-11-30 7:35 ` Aneesh Kumar K.V
2020-11-28 14:40 ` [PATCH v3 02/19] powerpc: remove arguments from fault handler functions Nicholas Piggin
2020-11-30 7:35 ` Aneesh Kumar K.V
2020-11-28 14:40 ` [PATCH v3 03/19] powerpc: bad_page_fault, do_break get registers from regs Nicholas Piggin
2020-11-30 7:36 ` Aneesh Kumar K.V
2020-12-22 14:42 ` Christophe Leroy
2020-12-26 8:19 ` Nicholas Piggin
2020-12-26 10:58 ` Nicholas Piggin
2020-11-28 14:40 ` [PATCH v3 04/19] powerpc/perf: move perf irq/nmi handling details into traps.c Nicholas Piggin
2020-12-16 7:17 ` Athira Rajeev
2020-11-28 14:41 ` [PATCH v3 05/19] powerpc: interrupt handler wrapper functions Nicholas Piggin
2020-11-30 7:37 ` Aneesh Kumar K.V
2020-12-04 8:31 ` Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 06/19] powerpc: add interrupt wrapper entry / exit stub functions Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 07/19] powerpc: add interrupt_cond_local_irq_enable helper Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 08/19] powerpc/64: context tracking remove _TIF_NOHZ Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 09/19] powerpc/64: context tracking move to interrupt wrappers Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 10/19] powerpc/64: add context tracking to asynchronous interrupts Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 11/19] powerpc: handle irq_enter/irq_exit in interrupt handler wrappers Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 12/19] powerpc/64s: move context tracking exit to interrupt exit path Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 13/19] powerpc/64s: reconcile interrupts in C Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 14/19] powerpc/64: move account_stolen_time into its own function Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 15/19] powerpc/64: entry cpu time accounting in C Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 16/19] powerpc: move NMI entry/exit code into wrapper Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 17/19] powerpc/64s: move NMI soft-mask handling to C Nicholas Piggin
2020-11-28 14:41 ` Nicholas Piggin [this message]
2020-11-28 14:41 ` [PATCH v3 19/19] powerpc/64s: power4 nap fixup in C Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201128144114.944000-19-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).