From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v6 37/39] powerpc/64s: move NMI soft-mask handling to C
Date: Sat, 16 Jan 2021 02:50:10 +1000 [thread overview]
Message-ID: <20210115165012.1260253-38-npiggin@gmail.com> (raw)
In-Reply-To: <20210115165012.1260253-1-npiggin@gmail.com>
Saving and restoring soft-mask state can now be done in C using the
interrupt handler wrapper functions.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/include/asm/interrupt.h | 26 ++++++++++++
arch/powerpc/kernel/exceptions-64s.S | 60 ----------------------------
2 files changed, 26 insertions(+), 60 deletions(-)
diff --git a/arch/powerpc/include/asm/interrupt.h b/arch/powerpc/include/asm/interrupt.h
index 879a0b2705d6..5f4e304a98d9 100644
--- a/arch/powerpc/include/asm/interrupt.h
+++ b/arch/powerpc/include/asm/interrupt.h
@@ -95,6 +95,10 @@ static inline void interrupt_async_exit_prepare(struct pt_regs *regs, struct int
struct interrupt_nmi_state {
#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
+ u8 irq_soft_mask;
+ u8 irq_happened;
+#endif
u8 ftrace_enabled;
#endif
};
@@ -102,6 +106,21 @@ struct interrupt_nmi_state {
static inline void interrupt_nmi_enter_prepare(struct pt_regs *regs, struct interrupt_nmi_state *state)
{
#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
+ state->irq_soft_mask = local_paca->irq_soft_mask;
+ state->irq_happened = local_paca->irq_happened;
+
+ /*
+ * Set IRQS_ALL_DISABLED unconditionally so irqs_disabled() does
+ * the right thing, and set IRQ_HARD_DIS. We do not want to reconcile
+ * because that goes through irq tracing which we don't want in NMI.
+ */
+ local_paca->irq_soft_mask = IRQS_ALL_DISABLED;
+ local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
+
+ /* Don't do any per-CPU operations until interrupt state is fixed */
+ state->ftrace_enabled = this_cpu_get_ftrace_enabled();
+#endif
state->ftrace_enabled = this_cpu_get_ftrace_enabled();
this_cpu_set_ftrace_enabled(0);
#endif
@@ -125,6 +144,13 @@ static inline void interrupt_nmi_exit_prepare(struct pt_regs *regs, struct inter
#ifdef CONFIG_PPC64
this_cpu_set_ftrace_enabled(state->ftrace_enabled);
+
+#ifdef CONFIG_PPC_BOOK3S_64
+ /* Check we didn't change the pending interrupt mask. */
+ WARN_ON_ONCE((state->irq_happened | PACA_IRQ_HARD_DIS) != local_paca->irq_happened);
+ local_paca->irq_happened = state->irq_happened;
+ local_paca->irq_soft_mask = state->irq_soft_mask;
+#endif
#endif
}
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 94b89ea123f3..2fca2bad6b02 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1008,20 +1008,6 @@ EXC_COMMON_BEGIN(system_reset_common)
ld r1,PACA_NMI_EMERG_SP(r13)
subi r1,r1,INT_FRAME_SIZE
__GEN_COMMON_BODY system_reset
- /*
- * Set IRQS_ALL_DISABLED unconditionally so irqs_disabled() does
- * the right thing. We do not want to reconcile because that goes
- * through irq tracing which we don't want in NMI.
- *
- * Save PACAIRQHAPPENED to RESULT (otherwise unused), and set HARD_DIS
- * as we are running with MSR[EE]=0.
- */
- li r10,IRQS_ALL_DISABLED
- stb r10,PACAIRQSOFTMASK(r13)
- lbz r10,PACAIRQHAPPENED(r13)
- std r10,RESULT(r1)
- ori r10,r10,PACA_IRQ_HARD_DIS
- stb r10,PACAIRQHAPPENED(r13)
addi r3,r1,STACK_FRAME_OVERHEAD
bl system_reset_exception
@@ -1037,14 +1023,6 @@ EXC_COMMON_BEGIN(system_reset_common)
subi r10,r10,1
sth r10,PACA_IN_NMI(r13)
- /*
- * Restore soft mask settings.
- */
- ld r10,RESULT(r1)
- stb r10,PACAIRQHAPPENED(r13)
- ld r10,SOFTE(r1)
- stb r10,PACAIRQSOFTMASK(r13)
-
kuap_kernel_restore r9, r10
EXCEPTION_RESTORE_REGS
RFI_TO_USER_OR_KERNEL
@@ -1190,30 +1168,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
li r10,MSR_RI
mtmsrd r10,1
- /*
- * Set IRQS_ALL_DISABLED and save PACAIRQHAPPENED (see
- * system_reset_common)
- */
- li r10,IRQS_ALL_DISABLED
- stb r10,PACAIRQSOFTMASK(r13)
- lbz r10,PACAIRQHAPPENED(r13)
- std r10,RESULT(r1)
- ori r10,r10,PACA_IRQ_HARD_DIS
- stb r10,PACAIRQHAPPENED(r13)
-
addi r3,r1,STACK_FRAME_OVERHEAD
bl machine_check_early
std r3,RESULT(r1) /* Save result */
ld r12,_MSR(r1)
- /*
- * Restore soft mask settings.
- */
- ld r10,RESULT(r1)
- stb r10,PACAIRQHAPPENED(r13)
- ld r10,SOFTE(r1)
- stb r10,PACAIRQSOFTMASK(r13)
-
#ifdef CONFIG_PPC_P7_NAP
/*
* Check if thread was in power saving mode. We come here when any
@@ -2818,17 +2777,6 @@ EXC_COMMON_BEGIN(soft_nmi_common)
subi r1,r1,INT_FRAME_SIZE
__GEN_COMMON_BODY soft_nmi
- /*
- * Set IRQS_ALL_DISABLED and save PACAIRQHAPPENED (see
- * system_reset_common)
- */
- li r10,IRQS_ALL_DISABLED
- stb r10,PACAIRQSOFTMASK(r13)
- lbz r10,PACAIRQHAPPENED(r13)
- std r10,RESULT(r1)
- ori r10,r10,PACA_IRQ_HARD_DIS
- stb r10,PACAIRQHAPPENED(r13)
-
addi r3,r1,STACK_FRAME_OVERHEAD
bl soft_nmi_interrupt
@@ -2836,14 +2784,6 @@ EXC_COMMON_BEGIN(soft_nmi_common)
li r9,0
mtmsrd r9,1
- /*
- * Restore soft mask settings.
- */
- ld r10,RESULT(r1)
- stb r10,PACAIRQHAPPENED(r13)
- ld r10,SOFTE(r1)
- stb r10,PACAIRQSOFTMASK(r13)
-
kuap_kernel_restore r9, r10
EXCEPTION_RESTORE_REGS hsrr=0
RFI_TO_KERNEL
--
2.23.0
next prev parent reply other threads:[~2021-01-15 18:27 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-15 16:49 [PATCH v6 00/39] powerpc: interrupt wrappers Nicholas Piggin
2021-01-15 16:49 ` [PATCH v6 01/39] KVM: PPC: Book3S HV: Context tracking exit guest context before enabling irqs Nicholas Piggin
2021-01-16 10:38 ` Nicholas Piggin
2021-01-15 16:49 ` [PATCH v6 02/39] powerpc/32s: move DABR match out of handle_page_fault Nicholas Piggin
2021-01-15 16:49 ` [PATCH v6 03/39] powerpc/64s: " Nicholas Piggin
2021-01-15 16:49 ` [PATCH v6 04/39] powerpc/64s: move the hash fault handling logic to C Nicholas Piggin
2021-01-15 16:49 ` [PATCH v6 05/39] powerpc: remove arguments from fault handler functions Nicholas Piggin
2021-01-27 6:38 ` Christophe Leroy
2021-01-28 0:05 ` Nicholas Piggin
2021-01-15 16:49 ` [PATCH v6 06/39] powerpc: do_break get registers from regs Nicholas Piggin
2021-01-15 16:49 ` [PATCH v6 07/39] powerpc: bad_page_fault " Nicholas Piggin
2021-01-15 17:09 ` Christophe Leroy
2021-01-16 0:42 ` Nicholas Piggin
2021-01-15 16:49 ` [PATCH v6 08/39] powerpc: rearrange do_page_fault error case to be inside exception_enter Nicholas Piggin
2021-01-28 9:25 ` Christophe Leroy
2021-01-15 16:49 ` [PATCH v6 09/39] powerpc/64s: move bad_page_fault handling to C Nicholas Piggin
2021-01-15 16:49 ` [PATCH v6 10/39] powerpc/64s: split do_hash_fault Nicholas Piggin
2021-01-15 16:49 ` [PATCH v6 11/39] powerpc/mm: Remove stale do_page_fault comment referring to SLB faults Nicholas Piggin
2021-01-15 16:49 ` [PATCH v6 12/39] powerpc/64s: slb comment update Nicholas Piggin
2021-01-15 16:49 ` [PATCH v6 13/39] powerpc/traps: add NOKPROBE_SYMBOL for sreset and mce Nicholas Piggin
2021-01-15 16:49 ` [PATCH v6 14/39] powerpc/perf: move perf irq/nmi handling details into traps.c Nicholas Piggin
2021-01-19 10:24 ` Athira Rajeev
2021-01-20 3:09 ` Nicholas Piggin
2021-01-20 4:21 ` Nicholas Piggin
2021-01-27 5:49 ` Athira Rajeev
2021-01-15 16:49 ` [PATCH v6 15/39] powerpc/time: move timer_broadcast_interrupt prototype to asm/time.h Nicholas Piggin
2021-01-15 16:49 ` [PATCH v6 16/39] powerpc: add and use unknown_async_exception Nicholas Piggin
2021-01-15 16:49 ` [PATCH v6 17/39] powerpc/fsl_booke/32: CacheLockingException remove args Nicholas Piggin
2021-01-15 17:14 ` Christophe Leroy
2021-01-16 0:43 ` Nicholas Piggin
2021-01-16 7:38 ` Christophe Leroy
2021-01-16 10:34 ` Nicholas Piggin
2021-01-15 16:49 ` [PATCH v6 18/39] powerpc: DebugException " Nicholas Piggin
2021-01-15 16:49 ` [PATCH v6 19/39] powerpc/cell: tidy up pervasive declarations Nicholas Piggin
2021-01-15 16:49 ` [PATCH v6 20/39] powerpc: introduce die_mce Nicholas Piggin
2021-01-15 16:49 ` [PATCH v6 21/39] powerpc/mce: ensure machine check handler always tests RI Nicholas Piggin
2021-01-15 16:49 ` [PATCH v6 22/39] powerpc: improve handling of unrecoverable system reset Nicholas Piggin
2021-01-15 16:49 ` [PATCH v6 23/39] powerpc: interrupt handler wrapper functions Nicholas Piggin
2021-01-15 16:49 ` [PATCH v6 24/39] powerpc: add interrupt wrapper entry / exit stub functions Nicholas Piggin
2021-01-15 16:49 ` [PATCH v6 25/39] powerpc: convert interrupt handlers to use wrappers Nicholas Piggin
2021-01-20 10:48 ` kernel test robot
2021-01-20 11:45 ` kernel test robot
2021-01-15 16:49 ` [PATCH v6 26/39] powerpc: add interrupt_cond_local_irq_enable helper Nicholas Piggin
2021-01-15 16:50 ` [PATCH v6 27/39] powerpc/64: context tracking remove _TIF_NOHZ Nicholas Piggin
2021-01-15 16:50 ` [PATCH v6 28/39] powerpc/64s/hash: improve context tracking of hash faults Nicholas Piggin
2021-01-15 16:50 ` [PATCH v6 29/39] powerpc/64: context tracking move to interrupt wrappers Nicholas Piggin
2021-01-15 16:50 ` [PATCH v6 30/39] powerpc/64: add context tracking to asynchronous interrupts Nicholas Piggin
2021-01-15 16:50 ` [PATCH v6 31/39] powerpc: handle irq_enter/irq_exit in interrupt handler wrappers Nicholas Piggin
2021-01-15 16:50 ` [PATCH v6 32/39] powerpc/64s: move context tracking exit to interrupt exit path Nicholas Piggin
2021-01-15 16:50 ` [PATCH v6 33/39] powerpc/64s: reconcile interrupts in C Nicholas Piggin
2021-01-15 16:50 ` [PATCH v6 34/39] powerpc/64: move account_stolen_time into its own function Nicholas Piggin
2021-01-15 16:50 ` [PATCH v6 35/39] powerpc/64: entry cpu time accounting in C Nicholas Piggin
2021-01-15 16:50 ` [PATCH v6 36/39] powerpc: move NMI entry/exit code into wrapper Nicholas Piggin
2021-01-15 16:50 ` Nicholas Piggin [this message]
2021-01-15 16:50 ` [PATCH v6 38/39] powerpc/64s: runlatch interrupt handling in C Nicholas Piggin
2021-01-15 16:50 ` [PATCH v6 39/39] powerpc/64s: power4 nap fixup " Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210115165012.1260253-38-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).