linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Jordan Niethe <jniethe5@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: christophe.leroy@c-s.fr, ajd@linux.ibm.com, npiggin@gmail.com,
	naveen.n.rao@linux.ibm.com, Jordan Niethe <jniethe5@gmail.com>,
	dja@axtens.net
Subject: [PATCH v9 8/8] powerpc/32: use set_memory_attr()
Date: Tue, 16 Mar 2021 14:17:41 +1100	[thread overview]
Message-ID: <20210316031741.1004850-8-jniethe5@gmail.com> (raw)
In-Reply-To: <20210316031741.1004850-1-jniethe5@gmail.com>

From: Christophe Leroy <christophe.leroy@c-s.fr>

Use set_memory_attr() instead of the PPC32 specific change_page_attr()

change_page_attr() was checking that the address was not mapped by
blocks and was handling highmem, but that's unneeded because the
affected pages can't be in highmem and block mapping verification
is already done by the callers.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[ruscur: rebase on powerpc/merge with Christophe's new patches]
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
---
 arch/powerpc/mm/pgtable_32.c | 60 ++++++------------------------------
 1 file changed, 10 insertions(+), 50 deletions(-)

diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index e0ec67a16887..dcf5ecca19d9 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -23,6 +23,7 @@
 #include <linux/highmem.h>
 #include <linux/memblock.h>
 #include <linux/slab.h>
+#include <linux/set_memory.h>
 
 #include <asm/pgalloc.h>
 #include <asm/fixmap.h>
@@ -132,64 +133,20 @@ void __init mapin_ram(void)
 	}
 }
 
-static int __change_page_attr_noflush(struct page *page, pgprot_t prot)
-{
-	pte_t *kpte;
-	unsigned long address;
-
-	BUG_ON(PageHighMem(page));
-	address = (unsigned long)page_address(page);
-
-	if (v_block_mapped(address))
-		return 0;
-	kpte = virt_to_kpte(address);
-	if (!kpte)
-		return -EINVAL;
-	__set_pte_at(&init_mm, address, kpte, mk_pte(page, prot), 0);
-
-	return 0;
-}
-
-/*
- * Change the page attributes of an page in the linear mapping.
- *
- * THIS DOES NOTHING WITH BAT MAPPINGS, DEBUG USE ONLY
- */
-static int change_page_attr(struct page *page, int numpages, pgprot_t prot)
-{
-	int i, err = 0;
-	unsigned long flags;
-	struct page *start = page;
-
-	local_irq_save(flags);
-	for (i = 0; i < numpages; i++, page++) {
-		err = __change_page_attr_noflush(page, prot);
-		if (err)
-			break;
-	}
-	wmb();
-	local_irq_restore(flags);
-	flush_tlb_kernel_range((unsigned long)page_address(start),
-			       (unsigned long)page_address(page));
-	return err;
-}
-
 void mark_initmem_nx(void)
 {
-	struct page *page = virt_to_page(_sinittext);
 	unsigned long numpages = PFN_UP((unsigned long)_einittext) -
 				 PFN_DOWN((unsigned long)_sinittext);
 
 	if (v_block_mapped((unsigned long)_sinittext))
 		mmu_mark_initmem_nx();
 	else
-		change_page_attr(page, numpages, PAGE_KERNEL);
+		set_memory_attr((unsigned long)_sinittext, numpages, PAGE_KERNEL);
 }
 
 #ifdef CONFIG_STRICT_KERNEL_RWX
 void mark_rodata_ro(void)
 {
-	struct page *page;
 	unsigned long numpages;
 
 	if (v_block_mapped((unsigned long)_stext + 1)) {
@@ -198,20 +155,18 @@ void mark_rodata_ro(void)
 		return;
 	}
 
-	page = virt_to_page(_stext);
 	numpages = PFN_UP((unsigned long)_etext) -
 		   PFN_DOWN((unsigned long)_stext);
 
-	change_page_attr(page, numpages, PAGE_KERNEL_ROX);
+	set_memory_attr((unsigned long)_stext, numpages, PAGE_KERNEL_ROX);
 	/*
 	 * mark .rodata as read only. Use __init_begin rather than __end_rodata
 	 * to cover NOTES and EXCEPTION_TABLE.
 	 */
-	page = virt_to_page(__start_rodata);
 	numpages = PFN_UP((unsigned long)__init_begin) -
 		   PFN_DOWN((unsigned long)__start_rodata);
 
-	change_page_attr(page, numpages, PAGE_KERNEL_RO);
+	set_memory_attr((unsigned long)__start_rodata, numpages, PAGE_KERNEL_RO);
 
 	// mark_initmem_nx() should have already run by now
 	ptdump_check_wx();
@@ -221,9 +176,14 @@ void mark_rodata_ro(void)
 #ifdef CONFIG_DEBUG_PAGEALLOC
 void __kernel_map_pages(struct page *page, int numpages, int enable)
 {
+	unsigned long addr = (unsigned long)page_address(page);
+
 	if (PageHighMem(page))
 		return;
 
-	change_page_attr(page, numpages, enable ? PAGE_KERNEL : __pgprot(0));
+	if (enable)
+		set_memory_attr(addr, numpages, PAGE_KERNEL);
+	else
+		set_memory_attr(addr, numpages, __pgprot(0));
 }
 #endif /* CONFIG_DEBUG_PAGEALLOC */
-- 
2.25.1


  parent reply	other threads:[~2021-03-16  3:22 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-16  3:17 [PATCH v9 1/8] powerpc/mm: Implement set_memory() routines Jordan Niethe
2021-03-16  3:17 ` [PATCH v9 2/8] powerpc/lib/code-patching: Set up Strict RWX patching earlier Jordan Niethe
2021-03-16  3:36   ` Russell Currey
2021-03-16  6:32   ` Christophe Leroy
2021-03-17  0:38     ` Jordan Niethe
2021-03-17 12:04       ` Michael Ellerman
2021-03-16  3:17 ` [PATCH v9 3/8] powerpc/kprobes: Mark newly allocated probes as RO Jordan Niethe
2021-03-16  6:44   ` Christophe Leroy
2021-03-17  0:50     ` Jordan Niethe
2021-03-17  0:52     ` Jordan Niethe
2021-03-17  6:12   ` Christophe Leroy
2021-03-18  2:42     ` Jordan Niethe
2021-03-16  3:17 ` [PATCH v9 4/8] powerpc/mm/ptdump: debugfs handler for W+X checks at runtime Jordan Niethe
2021-03-16  6:47   ` Christophe Leroy
2021-03-16  3:17 ` [PATCH v9 5/8] powerpc: Set ARCH_HAS_STRICT_MODULE_RWX Jordan Niethe
2021-03-16  6:51   ` Christophe Leroy
2021-03-17  2:15     ` Jordan Niethe
2021-03-17  5:43       ` Christophe Leroy
2021-03-16  3:17 ` [PATCH v9 6/8] powerpc/configs: Enable STRICT_MODULE_RWX in skiroot_defconfig Jordan Niethe
2021-03-16  3:17 ` [PATCH v9 7/8] powerpc/mm: implement set_memory_attr() Jordan Niethe
2021-03-16  7:25   ` Christophe Leroy
2021-03-17  0:54     ` Jordan Niethe
2021-03-16  3:17 ` Jordan Niethe [this message]
2021-03-19  1:19 ` [PATCH v9 1/8] powerpc/mm: Implement set_memory() routines Michael Ellerman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210316031741.1004850-8-jniethe5@gmail.com \
    --to=jniethe5@gmail.com \
    --cc=ajd@linux.ibm.com \
    --cc=christophe.leroy@c-s.fr \
    --cc=dja@axtens.net \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=naveen.n.rao@linux.ibm.com \
    --cc=npiggin@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).