From: Sven Peter <sven@svenpeter.dev>
To: Michael Ellerman <mpe@ellerman.id.au>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
Olof Johansson <olof@lixom.net>
Cc: Arnd Bergmann <arnd@arndb.de>, Sven Peter <sven@svenpeter.dev>,
Hector Martin <marcan@marcan.st>,
linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Mohamed Mediouni <mohamed.mediouni@caramail.com>,
Stan Skowronek <stan@corellium.com>,
linuxppc-dev@lists.ozlabs.org,
Alyssa Rosenzweig <alyssa@rosenzweig.io>,
Mark Kettenis <mark.kettenis@xs4all.nl>
Subject: [PATCH 09/10] i2c: pasemi: Add Apple platform driver
Date: Sun, 26 Sep 2021 11:58:46 +0200 [thread overview]
Message-ID: <20210926095847.38261-10-sven@svenpeter.dev> (raw)
In-Reply-To: <20210926095847.38261-1-sven@svenpeter.dev>
With all the previous preparations we can now finally add
the platform driver to support the PASemi-based controllers
in Apple SoCs. This does not work on the M1 yet but should
work on the early iPhones already.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
---
MAINTAINERS | 1 +
drivers/i2c/busses/Kconfig | 11 +++
drivers/i2c/busses/Makefile | 2 +
drivers/i2c/busses/i2c-pasemi-apple.c | 122 ++++++++++++++++++++++++++
4 files changed, 136 insertions(+)
create mode 100644 drivers/i2c/busses/i2c-pasemi-apple.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 380a680db92f..6e952158b6e1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1738,6 +1738,7 @@ F: Documentation/devicetree/bindings/i2c/apple,i2c.yaml
F: Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml
F: Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
F: arch/arm64/boot/dts/apple/
+F: drivers/i2c/busses/i2c-pasemi-apple.c
F: drivers/irqchip/irq-apple-aic.c
F: include/dt-bindings/interrupt-controller/apple-aic.h
F: include/dt-bindings/pinctrl/apple.h
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index e17790fe35a7..cf4dae07e319 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -856,6 +856,17 @@ config I2C_PASEMI
help
Supports the PA Semi PWRficient on-chip SMBus interfaces.
+config I2C_APPLE
+ tristate "Apple SMBus platform driver"
+ depends on ARCH_APPLE || COMPILE_TEST
+ default ARCH_APPLE
+ help
+ Say Y here if you want to use the I2C controller present on Apple
+ Silicon chips such as the M1.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-apple.
+
config I2C_PCA_PLATFORM
tristate "PCA9564/PCA9665 as platform device"
select I2C_ALGOPCA
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 0ab1b4cb2228..474fe2c520d0 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -86,6 +86,8 @@ obj-$(CONFIG_I2C_OMAP) += i2c-omap.o
obj-$(CONFIG_I2C_OWL) += i2c-owl.o
i2c-pasemi-objs := i2c-pasemi-core.o i2c-pasemi-pci.o
obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o
+i2c-apple-objs := i2c-pasemi-core.o i2c-pasemi-apple.o
+obj-$(CONFIG_I2C_APPLE) += i2c-apple.o
obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pca-platform.o
obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
diff --git a/drivers/i2c/busses/i2c-pasemi-apple.c b/drivers/i2c/busses/i2c-pasemi-apple.c
new file mode 100644
index 000000000000..c87f8e516eff
--- /dev/null
+++ b/drivers/i2c/busses/i2c-pasemi-apple.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 The Asahi Linux Contributors
+ *
+ * PA Semi PWRficient SMBus host driver for Apple SoCs
+ */
+
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include "i2c-pasemi-core.h"
+
+struct pasemi_apple_i2c_data {
+ struct pasemi_smbus smbus;
+ struct clk *clk_ref;
+ struct pinctrl *pctrl;
+};
+
+static int pasemi_apple_i2c_calc_clk_div(struct pasemi_apple_i2c_data *data,
+ u32 frequency)
+{
+ unsigned long clk_rate = clk_get_rate(data->clk_ref);
+
+ if (!clk_rate)
+ return -EINVAL;
+
+ data->smbus.clk_div = DIV_ROUND_UP(clk_rate, 16 * frequency);
+ if (data->smbus.clk_div < 4)
+ return dev_err_probe(data->smbus.dev, -EINVAL,
+ "Bus frequency %d is too fast.\n",
+ frequency);
+ if (data->smbus.clk_div > 0xff)
+ return dev_err_probe(data->smbus.dev, -EINVAL,
+ "Bus frequency %d is too slow.\n",
+ frequency);
+
+ return 0;
+}
+
+static int pasemi_apple_i2c_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct pasemi_apple_i2c_data *data;
+ struct pasemi_smbus *smbus;
+ u32 frequency;
+ int error;
+
+ data = devm_kzalloc(dev, sizeof(struct pasemi_apple_i2c_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ smbus = &data->smbus;
+ smbus->dev = dev;
+
+ smbus->ioaddr = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(smbus->ioaddr))
+ return PTR_ERR(smbus->ioaddr);
+
+ if (of_property_read_u32(dev->of_node, "clock-frequency", &frequency))
+ frequency = I2C_MAX_STANDARD_MODE_FREQ;
+
+ data->clk_ref = devm_clk_get(dev, NULL);
+ if (IS_ERR(data->clk_ref))
+ return PTR_ERR(data->clk_ref);
+
+ error = clk_prepare_enable(data->clk_ref);
+ if (error)
+ return error;
+
+ error = pasemi_apple_i2c_calc_clk_div(data, frequency);
+ if (error)
+ goto out_clk_disable;
+
+ smbus->adapter.dev.of_node = pdev->dev.of_node;
+ error = pasemi_i2c_common_probe(smbus);
+ if (error)
+ goto out_clk_disable;
+
+ platform_set_drvdata(pdev, data);
+
+ return 0;
+
+out_clk_disable:
+ clk_disable_unprepare(data->clk_ref);
+
+ return error;
+}
+
+static int pasemi_apple_i2c_remove(struct platform_device *pdev)
+{
+ struct pasemi_apple_i2c_data *data = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(data->clk_ref);
+ return 0;
+}
+
+static const struct of_device_id pasemi_apple_i2c_of_match[] = {
+ { .compatible = "apple,t8103-i2c" },
+ { .compatible = "apple,i2c" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, pasemi_apple_i2c_of_match);
+
+static struct platform_driver pasemi_apple_i2c_driver = {
+ .driver = {
+ .name = "i2c-apple",
+ .of_match_table = pasemi_apple_i2c_of_match,
+ },
+ .probe = pasemi_apple_i2c_probe,
+ .remove = pasemi_apple_i2c_remove,
+};
+module_platform_driver(pasemi_apple_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sven Peter <sven@svenpeter.dev>");
+MODULE_DESCRIPTION("Apple/PASemi SMBus platform driver");
--
2.25.1
next prev parent reply other threads:[~2021-09-26 12:50 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-26 9:58 [PATCH 00/10] Add Apple M1 support to PASemi i2c driver Sven Peter
2021-09-26 9:58 ` [PATCH 01/10] dt-bindings: i2c: Add Apple I2C controller bindings Sven Peter
2021-10-04 18:01 ` Rob Herring
2021-09-26 9:58 ` [PATCH 02/10] i2c: pasemi: Use io{read,write}32 Sven Peter
2021-09-27 7:39 ` Arnd Bergmann
2021-09-28 15:48 ` Sven Peter
2021-09-26 9:58 ` [PATCH 03/10] i2c: pasemi: Remove usage of pci_dev Sven Peter
2021-09-26 9:58 ` [PATCH 04/10] i2c: pasemi: Split off common probing code Sven Peter
2021-09-26 9:58 ` [PATCH 05/10] i2c: pasemi: Split pci driver to its own file Sven Peter
2021-09-26 9:58 ` [PATCH 06/10] i2c: pasemi: Move common reset code to own function Sven Peter
2021-09-26 9:58 ` [PATCH 07/10] i2c: pasemi: Allow to configure bus frequency Sven Peter
2021-09-26 9:58 ` [PATCH 08/10] i2c: pasemi: Refactor _probe to use devm_* Sven Peter
2021-09-26 9:58 ` Sven Peter [this message]
2021-09-29 20:33 ` [PATCH 09/10] i2c: pasemi: Add Apple platform driver Wolfram Sang
2021-10-03 14:37 ` Sven Peter
2021-09-26 9:58 ` [PATCH 10/10] i2c: pasemi: Set enable bit for Apple variant Sven Peter
2021-09-27 7:42 ` [PATCH 00/10] Add Apple M1 support to PASemi i2c driver Arnd Bergmann
2021-09-29 20:35 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210926095847.38261-10-sven@svenpeter.dev \
--to=sven@svenpeter.dev \
--cc=alyssa@rosenzweig.io \
--cc=arnd@arndb.de \
--cc=benh@kernel.crashing.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=marcan@marcan.st \
--cc=mark.kettenis@xs4all.nl \
--cc=mohamed.mediouni@caramail.com \
--cc=mpe@ellerman.id.au \
--cc=olof@lixom.net \
--cc=paulus@samba.org \
--cc=stan@corellium.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).