linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: "Pali Rohár" <pali@kernel.org>
To: Michael Ellerman <mpe@ellerman.id.au>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] powerpc/pci: Allow to disable filling deprecated pci-OF-bus-map
Date: Sat, 26 Nov 2022 17:23:45 +0100	[thread overview]
Message-ID: <20221126162345.a4uuyefmtavfqa6g@pali> (raw)
In-Reply-To: <20221101222603.h3nlrp6xuhrnkmht@pali>

PING?

On Tuesday 01 November 2022 23:26:03 Pali Rohár wrote:
> Hello! Gentle reminder...
> 
> On Sunday 09 October 2022 13:25:55 Pali Rohár wrote:
> > Hello! Any comments on this? It would be nice to take these two patches
> > (or at least patch 2) to finally enable PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
> > by default where possible.
> > 
> > Per following comment there can be an issue with early powermac so seems
> > that PPC_PCI_OF_BUS_MAP_FILL still has to be by default enabled (which
> > implies that PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT is disabled) on powermac:
> > https://lore.kernel.org/linuxppc-dev/575f239205e8635add81c9f902b7d9db7beb83ea.camel@kernel.crashing.org/
> > 
> > On Wednesday 17 August 2022 18:39:26 Pali Rohár wrote:
> > > Creating or filling pci-OF-bus-map property in the device-tree is
> > > deprecated since May 2006 [1]. Allow to disable filling this property by
> > > unsetting config option CONFIG_PPC_PCI_OF_BUS_MAP_FILL for remaining chrp
> > > and powermac code.
> > > 
> > > Disabling of pci-OF-bus-map property allows to enable new option
> > > CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT also for chrp and powermac.
> > > 
> > > [1] - https://lore.kernel.org/linuxppc-dev/1148016268.13249.14.camel@localhost.localdomain/
> > > 
> > > Signed-off-by: Pali Rohár <pali@kernel.org>
> > > ---
> > >  arch/powerpc/Kconfig         | 12 +++++++++++-
> > >  arch/powerpc/kernel/pci_32.c |  6 ++++++
> > >  2 files changed, 17 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> > > index 5881441f7672..df2696c406ad 100644
> > > --- a/arch/powerpc/Kconfig
> > > +++ b/arch/powerpc/Kconfig
> > > @@ -373,9 +373,19 @@ config PPC_DCR
> > >  	depends on PPC_DCR_NATIVE || PPC_DCR_MMIO
> > >  	default y
> > >  
> > > +config PPC_PCI_OF_BUS_MAP_FILL
> > > +	bool "Fill pci-OF-bus-map property in the device-tree"
> > > +	depends on PPC32
> > > +	depends on PPC_PMAC || PPC_CHRP
> > > +	default y
> > > +	help
> > > +	  This option creates and fills pci-OF-bus-map property in the
> > > +	  device-tree which is deprecated and is needed only for old
> > > +	  platforms.
> > > +
> > >  config PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
> > >  	depends on PPC32
> > > -	depends on !PPC_PMAC && !PPC_CHRP
> > > +	depends on !PPC_PCI_OF_BUS_MAP_FILL
> > >  	bool "Assign PCI bus numbers from zero individually for each PCI domain"
> > >  	help
> > >  	  By default on PPC32 were PCI bus numbers unique across all PCI domains.
> > > diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
> > > index 433965bf37b4..ffc4e1928c80 100644
> > > --- a/arch/powerpc/kernel/pci_32.c
> > > +++ b/arch/powerpc/kernel/pci_32.c
> > > @@ -64,6 +64,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM,	PCI_DEVICE_ID_IBM_CPC710_PCI64,	fixu
> > >  
> > >  #if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_CHRP)
> > >  
> > > +#ifdef CONFIG_PPC_PCI_OF_BUS_MAP_FILL
> > > +
> > >  static u8* pci_to_OF_bus_map;
> > >  static int pci_bus_count;
> > >  
> > > @@ -223,6 +225,8 @@ pci_create_OF_bus_map(void)
> > >  }
> > >  #endif
> > >  
> > > +#endif /* CONFIG_PPC_PCI_OF_BUS_MAP_FILL */
> > > +
> > >  #endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_CHRP) */
> > >  
> > >  void pcibios_setup_phb_io_space(struct pci_controller *hose)
> > > @@ -264,6 +268,7 @@ static int __init pcibios_init(void)
> > >  	}
> > >  
> > >  #if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_CHRP)
> > > +#ifdef CONFIG_PPC_PCI_OF_BUS_MAP_FILL
> > >  	pci_bus_count = next_busno;
> > >  
> > >  	/* OpenFirmware based machines need a map of OF bus
> > > @@ -272,6 +277,7 @@ static int __init pcibios_init(void)
> > >  	 */
> > >  	if (pci_assign_all_buses)
> > >  		pcibios_make_OF_bus_map();
> > > +#endif
> > >  #endif
> > >  
> > >  	/* Call common code to handle resource allocation */
> > > -- 
> > > 2.20.1
> > > 

  reply	other threads:[~2022-11-26 16:25 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-17 16:39 [PATCH 1/2] powerpc/pci: Allow to disable filling deprecated pci-OF-bus-map Pali Rohár
2022-08-17 16:39 ` [PATCH 2/2] powerpc/pci: Enable PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT by default Pali Rohár
2022-10-09 11:25 ` [PATCH 1/2] powerpc/pci: Allow to disable filling deprecated pci-OF-bus-map Pali Rohár
2022-11-01 22:26   ` Pali Rohár
2022-11-26 16:23     ` Pali Rohár [this message]
2022-12-16 18:12       ` Pali Rohár
2023-01-22 11:21         ` Pali Rohár
2023-01-26 10:59           ` Michael Ellerman
2023-01-28 13:23             ` Pali Rohár
2023-01-28 13:34 ` [PATCH v2 1/2] powerpc/pci: Enable PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT by default Pali Rohár
2023-01-28 13:34   ` [PATCH v2 2/2] powerpc/pci: Allow to disable filling deprecated pci-OF-bus-map Pali Rohár
2023-02-15 12:40   ` [PATCH v2 1/2] powerpc/pci: Enable PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT by default Michael Ellerman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221126162345.a4uuyefmtavfqa6g@pali \
    --to=pali@kernel.org \
    --cc=benh@kernel.crashing.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpe@ellerman.id.au \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).