From: Li Yang <leoli@freescale.com>
To: Dan Williams <dan.j.williams@intel.com>
Cc: linuxppc-dev Development <linuxppc-dev@ozlabs.org>,
lkml <linux-kernel@vger.kernel.org>
Subject: [GIT PULL] fsldma driver fixes
Date: Fri, 22 May 2009 18:47:38 +0800 [thread overview]
Message-ID: <2a27d3730905220347s59dbd152kc69c8399693ae307@mail.gmail.com> (raw)
Hi Dan,
Here are fixes for Freescale DMA engine driver.
Thanks,
- Leo
The following changes since commit 5805977e63a36ad56594a623f3bd2bebcb7db233:
Linus Torvalds (1):
Merge branch 'for-linus' of git://git.kernel.org/.../jbarnes/drm-2.6
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/leo/fsl-soc.git fsldma
Ira Snyder (4):
fsldma: fix "DMA halt timeout!" errors
fsldma: fix infinite loop on multi-descriptor DMA chain completion
fsldma: snooping is not enabled for last entry in descriptor chain
fsldma: fix memory leak on error path in fsl_dma_prep_memcpy()
Li Yang (1):
fsldma: update mailling list address in MAINTAINERS
Roel Kluin (1):
fsldma: fix check on potential fdev->chan[] overflow
MAINTAINERS | 2 +-
drivers/dma/fsldma.c | 58 ++++++++++++++++++++++++++++++++++---------------
2 files changed, 41 insertions(+), 19 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 2b349ba..cac3e3b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2241,7 +2241,7 @@ P: Li Yang
M: leoli@freescale.com
P: Zhang Wei
M: zw@zh-kernel.org
-L: linuxppc-embedded@ozlabs.org
+L: linuxppc-dev@ozlabs.org
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/dma/fsldma.*
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index da8a8ed..1578310 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -179,9 +179,14 @@ static void dma_halt(struct fsl_dma_chan *fsl_chan)
static void set_ld_eol(struct fsl_dma_chan *fsl_chan,
struct fsl_desc_sw *desc)
{
+ u64 snoop_bits;
+
+ snoop_bits = ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_83XX)
+ ? FSL_DMA_SNEN : 0;
+
desc->hw.next_ln_addr = CPU_TO_DMA(fsl_chan,
- DMA_TO_CPU(fsl_chan, desc->hw.next_ln_addr, 64) | FSL_DMA_EOL,
- 64);
+ DMA_TO_CPU(fsl_chan, desc->hw.next_ln_addr, 64) | FSL_DMA_EOL
+ | snoop_bits, 64);
}
static void append_ld_queue(struct fsl_dma_chan *fsl_chan,
@@ -313,8 +318,8 @@ static void fsl_chan_toggle_ext_start(struct
fsl_dma_chan *fsl_chan, int enable)
static dma_cookie_t fsl_dma_tx_submit(struct dma_async_tx_descriptor *tx)
{
- struct fsl_desc_sw *desc = tx_to_fsl_desc(tx);
struct fsl_dma_chan *fsl_chan = to_fsl_chan(tx->chan);
+ struct fsl_desc_sw *desc;
unsigned long flags;
dma_cookie_t cookie;
@@ -322,14 +327,17 @@ static dma_cookie_t fsl_dma_tx_submit(struct
dma_async_tx_descriptor *tx)
spin_lock_irqsave(&fsl_chan->desc_lock, flags);
cookie = fsl_chan->common.cookie;
- cookie++;
- if (cookie < 0)
- cookie = 1;
- desc->async_tx.cookie = cookie;
- fsl_chan->common.cookie = desc->async_tx.cookie;
+ list_for_each_entry(desc, &tx->tx_list, node) {
+ cookie++;
+ if (cookie < 0)
+ cookie = 1;
- append_ld_queue(fsl_chan, desc);
- list_splice_init(&desc->async_tx.tx_list, fsl_chan->ld_queue.prev);
+ desc->async_tx.cookie = cookie;
+ }
+
+ fsl_chan->common.cookie = cookie;
+ append_ld_queue(fsl_chan, tx_to_fsl_desc(tx));
+ list_splice_init(&tx->tx_list, fsl_chan->ld_queue.prev);
spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
@@ -454,8 +462,8 @@ static struct dma_async_tx_descriptor *fsl_dma_prep_memcpy(
{
struct fsl_dma_chan *fsl_chan;
struct fsl_desc_sw *first = NULL, *prev = NULL, *new;
+ struct list_head *list;
size_t copy;
- LIST_HEAD(link_chain);
if (!chan)
return NULL;
@@ -472,7 +480,7 @@ static struct dma_async_tx_descriptor *fsl_dma_prep_memcpy(
if (!new) {
dev_err(fsl_chan->dev,
"No free memory for link descriptor\n");
- return NULL;
+ goto fail;
}
#ifdef FSL_DMA_LD_DEBUG
dev_dbg(fsl_chan->dev, "new link desc alloc %p\n", new);
@@ -507,7 +515,19 @@ static struct dma_async_tx_descriptor *fsl_dma_prep_memcpy(
/* Set End-of-link to the last link descriptor of new list*/
set_ld_eol(fsl_chan, new);
- return first ? &first->async_tx : NULL;
+ return &first->async_tx;
+
+fail:
+ if (!first)
+ return NULL;
+
+ list = &first->async_tx.tx_list;
+ list_for_each_entry_safe_reverse(new, prev, list, node) {
+ list_del(&new->node);
+ dma_pool_free(fsl_chan->desc_pool, new, new->async_tx.phys);
+ }
+
+ return NULL;
}
/**
@@ -598,15 +618,16 @@ static void fsl_chan_xfer_ld_queue(struct
fsl_dma_chan *fsl_chan)
dma_addr_t next_dest_addr;
unsigned long flags;
+ spin_lock_irqsave(&fsl_chan->desc_lock, flags);
+
if (!dma_is_idle(fsl_chan))
- return;
+ goto out_unlock;
dma_halt(fsl_chan);
/* If there are some link descriptors
* not transfered in queue. We need to start it.
*/
- spin_lock_irqsave(&fsl_chan->desc_lock, flags);
/* Find the first un-transfer desciptor */
for (ld_node = fsl_chan->ld_queue.next;
@@ -617,8 +638,6 @@ static void fsl_chan_xfer_ld_queue(struct
fsl_dma_chan *fsl_chan)
fsl_chan->common.cookie) == DMA_SUCCESS);
ld_node = ld_node->next);
- spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
-
if (ld_node != &fsl_chan->ld_queue) {
/* Get the ld start address from ld_queue */
next_dest_addr = to_fsl_desc(ld_node)->async_tx.phys;
@@ -630,6 +649,9 @@ static void fsl_chan_xfer_ld_queue(struct
fsl_dma_chan *fsl_chan)
set_cdar(fsl_chan, 0);
set_ndar(fsl_chan, 0);
}
+
+out_unlock:
+ spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
}
/**
@@ -830,7 +852,7 @@ static int __devinit fsl_dma_chan_probe(struct
fsl_dma_device *fdev,
new_fsl_chan->reg.end - new_fsl_chan->reg.start + 1);
new_fsl_chan->id = ((new_fsl_chan->reg.start - 0x100) & 0xfff) >> 7;
- if (new_fsl_chan->id > FSL_DMA_MAX_CHANS_PER_DEVICE) {
+ if (new_fsl_chan->id >= FSL_DMA_MAX_CHANS_PER_DEVICE) {
dev_err(fdev->dev, "There is no %d channel!\n",
new_fsl_chan->id);
err = -EINVAL;
next reply other threads:[~2009-05-22 10:47 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-22 10:47 Li Yang [this message]
2009-05-26 23:59 ` [GIT PULL] fsldma driver fixes Dan Williams
2009-05-27 8:24 ` Li Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2a27d3730905220347s59dbd152kc69c8399693ae307@mail.gmail.com \
--to=leoli@freescale.com \
--cc=dan.j.williams@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).