linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
* [RFC PATCH] x86, numa: always initialize all possible nodes
@ 2019-01-14  8:24 Michal Hocko
  2019-01-14 10:26 ` Michael Ellerman
  2019-01-24 14:17 ` Michal Hocko
  0 siblings, 2 replies; 12+ messages in thread
From: Michal Hocko @ 2019-01-14  8:24 UTC (permalink / raw)
  To: linux-mm
  Cc: Tony Luck, linux-ia64, Peter Zijlstra, x86, LKML, Pingfan Liu,
	Dave Hansen, Michal Hocko, linuxppc-dev

From: Michal Hocko <mhocko@suse.com>

Pingfan Liu has reported the following splat
[    5.772742] BUG: unable to handle kernel paging request at 0000000000002088
[    5.773618] PGD 0 P4D 0
[    5.773618] Oops: 0000 [#1] SMP NOPTI
[    5.773618] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.20.0-rc1+ #3
[    5.773618] Hardware name: Dell Inc. PowerEdge R7425/02MJ3T, BIOS 1.4.3 06/29/2018
[    5.773618] RIP: 0010:__alloc_pages_nodemask+0xe2/0x2a0
[    5.773618] Code: 00 00 44 89 ea 80 ca 80 41 83 f8 01 44 0f 44 ea 89 da c1 ea 08 83 e2 01 88 54 24 20 48 8b 54 24 08 48 85 d2 0f 85 46 01 00 00 <3b> 77 08 0f 82 3d 01 00 00 48 89 f8 44 89 ea 48 89
e1 44 89 e6 89
[    5.773618] RSP: 0018:ffffaa600005fb20 EFLAGS: 00010246
[    5.773618] RAX: 0000000000000000 RBX: 00000000006012c0 RCX: 0000000000000000
[    5.773618] RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000002080
[    5.773618] RBP: 00000000006012c0 R08: 0000000000000000 R09: 0000000000000002
[    5.773618] R10: 00000000006080c0 R11: 0000000000000002 R12: 0000000000000000
[    5.773618] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000002
[    5.773618] FS:  0000000000000000(0000) GS:ffff8c69afe00000(0000) knlGS:0000000000000000
[    5.773618] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    5.773618] CR2: 0000000000002088 CR3: 000000087e00a000 CR4: 00000000003406e0
[    5.773618] Call Trace:
[    5.773618]  new_slab+0xa9/0x570
[    5.773618]  ___slab_alloc+0x375/0x540
[    5.773618]  ? pinctrl_bind_pins+0x2b/0x2a0
[    5.773618]  __slab_alloc+0x1c/0x38
[    5.773618]  __kmalloc_node_track_caller+0xc8/0x270
[    5.773618]  ? pinctrl_bind_pins+0x2b/0x2a0
[    5.773618]  devm_kmalloc+0x28/0x60
[    5.773618]  pinctrl_bind_pins+0x2b/0x2a0
[    5.773618]  really_probe+0x73/0x420
[    5.773618]  driver_probe_device+0x115/0x130
[    5.773618]  __driver_attach+0x103/0x110
[    5.773618]  ? driver_probe_device+0x130/0x130
[    5.773618]  bus_for_each_dev+0x67/0xc0
[    5.773618]  ? klist_add_tail+0x3b/0x70
[    5.773618]  bus_add_driver+0x41/0x260
[    5.773618]  ? pcie_port_setup+0x4d/0x4d
[    5.773618]  driver_register+0x5b/0xe0
[    5.773618]  ? pcie_port_setup+0x4d/0x4d
[    5.773618]  do_one_initcall+0x4e/0x1d4
[    5.773618]  ? init_setup+0x25/0x28
[    5.773618]  kernel_init_freeable+0x1c1/0x26e
[    5.773618]  ? loglevel+0x5b/0x5b
[    5.773618]  ? rest_init+0xb0/0xb0
[    5.773618]  kernel_init+0xa/0x110
[    5.773618]  ret_from_fork+0x22/0x40
[    5.773618] Modules linked in:
[    5.773618] CR2: 0000000000002088
[    5.773618] ---[ end trace 1030c9120a03d081 ]---

with his AMD machine with the following topology
  NUMA node0 CPU(s):     0,8,16,24
  NUMA node1 CPU(s):     2,10,18,26
  NUMA node2 CPU(s):     4,12,20,28
  NUMA node3 CPU(s):     6,14,22,30
  NUMA node4 CPU(s):     1,9,17,25
  NUMA node5 CPU(s):     3,11,19,27
  NUMA node6 CPU(s):     5,13,21,29
  NUMA node7 CPU(s):     7,15,23,31

[    0.007418] Early memory node ranges
[    0.007419]   node   1: [mem 0x0000000000001000-0x000000000008efff]
[    0.007420]   node   1: [mem 0x0000000000090000-0x000000000009ffff]
[    0.007422]   node   1: [mem 0x0000000000100000-0x000000005c3d6fff]
[    0.007422]   node   1: [mem 0x00000000643df000-0x0000000068ff7fff]
[    0.007423]   node   1: [mem 0x000000006c528000-0x000000006fffffff]
[    0.007424]   node   1: [mem 0x0000000100000000-0x000000047fffffff]
[    0.007425]   node   5: [mem 0x0000000480000000-0x000000087effffff]

and nr_cpus set to 4. The underlying reason is tha the device is bound
to node 2 which doesn't have any memory and init_cpu_to_node only
initializes memory-less nodes for possible cpus which nr_cpus restrics.
This in turn means that proper zonelists are not allocated and the page
allocator blows up.

Fix the issue by reworking how x86 initializes the memory less nodes.
The current implementation is hacked into the workflow and it doesn't
allow any flexibility. There is init_memory_less_node called for each
offline node that has a CPU as already mentioned above. This will make
sure that we will have a new online node without any memory. Much later
on we build a zone list for this node and things seem to work, except
they do not (e.g. due to nr_cpus). Not to mention that it doesn't really
make much sense to consider an empty node as online because we just
consider this node whenever we want to iterate nodes to use and empty
node is obviously not the best candidate. This is all just too fragile.

Reported-by: Pingfan Liu <kernelfans@gmail.com>
Tested-by: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
---

Hi,
I am sending this as an RFC because I am not sure this is the proper way
to go myself. I am especially not sure about other architectures
supporting memoryless nodes (ppc and ia64 AFAICS or are there more?).

I would appreciate a help with those architectures because I couldn't
really grasp how the memoryless nodes are really initialized there. E.g.
ppc only seem to call setup_node_data for online nodes but I couldn't
find any special treatment for nodes without any memory.

Any further help, comments are appreaciated!

 arch/x86/mm/numa.c | 27 +++------------------------
 mm/page_alloc.c    | 15 +++++++++------
 2 files changed, 12 insertions(+), 30 deletions(-)

diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 1308f5408bf7..b3621ee4dfe8 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -216,8 +216,6 @@ static void __init alloc_node_data(int nid)
 
 	node_data[nid] = nd;
 	memset(NODE_DATA(nid), 0, sizeof(pg_data_t));
-
-	node_set_online(nid);
 }
 
 /**
@@ -570,7 +568,7 @@ static int __init numa_register_memblks(struct numa_meminfo *mi)
 		return -EINVAL;
 
 	/* Finally register nodes. */
-	for_each_node_mask(nid, node_possible_map) {
+	for_each_node_mask(nid, numa_nodes_parsed) {
 		u64 start = PFN_PHYS(max_pfn);
 		u64 end = 0;
 
@@ -581,9 +579,6 @@ static int __init numa_register_memblks(struct numa_meminfo *mi)
 			end = max(mi->blk[i].end, end);
 		}
 
-		if (start >= end)
-			continue;
-
 		/*
 		 * Don't confuse VM with a node that doesn't have the
 		 * minimum amount of memory:
@@ -592,6 +587,8 @@ static int __init numa_register_memblks(struct numa_meminfo *mi)
 			continue;
 
 		alloc_node_data(nid);
+		if (end)
+			node_set_online(nid);
 	}
 
 	/* Dump memblock with node info and return. */
@@ -721,21 +718,6 @@ void __init x86_numa_init(void)
 	numa_init(dummy_numa_init);
 }
 
-static void __init init_memory_less_node(int nid)
-{
-	unsigned long zones_size[MAX_NR_ZONES] = {0};
-	unsigned long zholes_size[MAX_NR_ZONES] = {0};
-
-	/* Allocate and initialize node data. Memory-less node is now online.*/
-	alloc_node_data(nid);
-	free_area_init_node(nid, zones_size, 0, zholes_size);
-
-	/*
-	 * All zonelists will be built later in start_kernel() after per cpu
-	 * areas are initialized.
-	 */
-}
-
 /*
  * Setup early cpu_to_node.
  *
@@ -763,9 +745,6 @@ void __init init_cpu_to_node(void)
 		if (node == NUMA_NO_NODE)
 			continue;
 
-		if (!node_online(node))
-			init_memory_less_node(node);
-
 		numa_set_node(cpu, node);
 	}
 }
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 2ec9cc407216..2e097f336126 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -5361,10 +5361,11 @@ static void __build_all_zonelists(void *data)
 	if (self && !node_online(self->node_id)) {
 		build_zonelists(self);
 	} else {
-		for_each_online_node(nid) {
+		for_each_node(nid) {
 			pg_data_t *pgdat = NODE_DATA(nid);
 
-			build_zonelists(pgdat);
+			if (pgdat)
+				build_zonelists(pgdat);
 		}
 
 #ifdef CONFIG_HAVE_MEMORYLESS_NODES
@@ -6644,10 +6645,8 @@ static unsigned long __init find_min_pfn_for_node(int nid)
 	for_each_mem_pfn_range(i, nid, &start_pfn, NULL, NULL)
 		min_pfn = min(min_pfn, start_pfn);
 
-	if (min_pfn == ULONG_MAX) {
-		pr_warn("Could not find start_pfn for node %d\n", nid);
+	if (min_pfn == ULONG_MAX)
 		return 0;
-	}
 
 	return min_pfn;
 }
@@ -6991,8 +6990,12 @@ void __init free_area_init_nodes(unsigned long *max_zone_pfn)
 	mminit_verify_pageflags_layout();
 	setup_nr_node_ids();
 	zero_resv_unavail();
-	for_each_online_node(nid) {
+	for_each_node(nid) {
 		pg_data_t *pgdat = NODE_DATA(nid);
+
+		if (!pgdat)
+			continue;
+
 		free_area_init_node(nid, NULL,
 				find_min_pfn_for_node(nid), NULL);
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2019-02-11 14:57 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-14  8:24 [RFC PATCH] x86, numa: always initialize all possible nodes Michal Hocko
2019-01-14 10:26 ` Michael Ellerman
2019-01-14 11:48   ` Michal Hocko
2019-01-15  5:32   ` Pingfan Liu
2019-01-24 14:17 ` Michal Hocko
2019-01-24 17:51   ` Mike Rapoport
2019-01-25 10:40     ` Michal Hocko
2019-01-25 19:25       ` Mike Rapoport
2019-01-24 19:10   ` Dave Hansen
2019-01-25 10:50     ` Michal Hocko
2019-02-11 13:49       ` Ingo Molnar
2019-02-11 14:52         ` Michal Hocko

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).