From: Michael Bringmann <mwb@linux.vnet.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Michael Bringmann <mwb@linux.vnet.ibm.com>,
Nathan Fontenot <nfont@linux.vnet.ibm.com>,
John Allen <jallen@linux.vnet.ibm.com>,
Tyrel Datwyler <tyreld@linux.vnet.ibm.com>,
Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Subject: [PATCH v04 1/9] hotplug/cpu: Conditionally acquire/release DRC index
Date: Wed, 20 Jun 2018 19:29:38 -0500 [thread overview]
Message-ID: <41cb900b-4e7d-4085-0a67-faeb46b523b0@linux.vnet.ibm.com> (raw)
In-Reply-To: <0425b353-54b0-6ccd-fbb6-3d26d9448bb5@linux.vnet.ibm.com>
powerpc/cpu: Modify dlpar_cpu_add and dlpar_cpu_remove to allow the
skipping of DRC index acquire or release operations during the CPU
add or remove operations. This is intended to support subsequent
changes to provide a 'CPU readd' operation.
Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
---
Changes in patch:
-- Move new validity check added to pseries_smp_notifier
to another patch
---
arch/powerpc/platforms/pseries/hotplug-cpu.c | 68 +++++++++++++++-----------
1 file changed, 39 insertions(+), 29 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
index 6ef77ca..3632db2 100644
--- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -432,7 +432,7 @@ static bool valid_cpu_drc_index(struct device_node *parent, u32 drc_index)
return found;
}
-static ssize_t dlpar_cpu_add(u32 drc_index)
+static ssize_t dlpar_cpu_add(u32 drc_index, bool acquire_drc)
{
struct device_node *dn, *parent;
int rc, saved_rc;
@@ -457,19 +457,22 @@ static ssize_t dlpar_cpu_add(u32 drc_index)
return -EINVAL;
}
- rc = dlpar_acquire_drc(drc_index);
- if (rc) {
- pr_warn("Failed to acquire DRC, rc: %d, drc index: %x\n",
- rc, drc_index);
- of_node_put(parent);
- return -EINVAL;
+ if (acquire_drc) {
+ rc = dlpar_acquire_drc(drc_index);
+ if (rc) {
+ pr_warn("Failed to acquire DRC, rc: %d, drc index: %x\n",
+ rc, drc_index);
+ of_node_put(parent);
+ return -EINVAL;
+ }
}
dn = dlpar_configure_connector(cpu_to_be32(drc_index), parent);
if (!dn) {
pr_warn("Failed call to configure-connector, drc index: %x\n",
drc_index);
- dlpar_release_drc(drc_index);
+ if (acquire_drc)
+ dlpar_release_drc(drc_index);
of_node_put(parent);
return -EINVAL;
}
@@ -484,8 +487,9 @@ static ssize_t dlpar_cpu_add(u32 drc_index)
pr_warn("Failed to attach node %s, rc: %d, drc index: %x\n",
dn->name, rc, drc_index);
- rc = dlpar_release_drc(drc_index);
- if (!rc)
+ if (acquire_drc)
+ rc = dlpar_release_drc(drc_index);
+ if (!rc || acquire_drc)
dlpar_free_cc_nodes(dn);
return saved_rc;
@@ -498,7 +502,7 @@ static ssize_t dlpar_cpu_add(u32 drc_index)
dn->name, rc, drc_index);
rc = dlpar_detach_node(dn);
- if (!rc)
+ if (!rc && acquire_drc)
dlpar_release_drc(drc_index);
return saved_rc;
@@ -566,7 +570,8 @@ static int dlpar_offline_cpu(struct device_node *dn)
}
-static ssize_t dlpar_cpu_remove(struct device_node *dn, u32 drc_index)
+static ssize_t dlpar_cpu_remove(struct device_node *dn, u32 drc_index,
+ bool release_drc)
{
int rc;
@@ -579,12 +584,14 @@ static ssize_t dlpar_cpu_remove(struct device_node *dn, u32 drc_index)
return -EINVAL;
}
- rc = dlpar_release_drc(drc_index);
- if (rc) {
- pr_warn("Failed to release drc (%x) for CPU %s, rc: %d\n",
- drc_index, dn->name, rc);
- dlpar_online_cpu(dn);
- return rc;
+ if (release_drc) {
+ rc = dlpar_release_drc(drc_index);
+ if (rc) {
+ pr_warn("Failed to release drc (%x) for CPU %s, rc: %d\n",
+ drc_index, dn->name, rc);
+ dlpar_online_cpu(dn);
+ return rc;
+ }
}
rc = dlpar_detach_node(dn);
@@ -593,7 +600,10 @@ static ssize_t dlpar_cpu_remove(struct device_node *dn, u32 drc_index)
pr_warn("Failed to detach CPU %s, rc: %d", dn->name, rc);
- rc = dlpar_acquire_drc(drc_index);
+ if (release_drc)
+ rc = dlpar_acquire_drc(drc_index);
+ else
+ rc = 0;
if (!rc)
dlpar_online_cpu(dn);
@@ -622,7 +632,7 @@ static struct device_node *cpu_drc_index_to_dn(u32 drc_index)
return dn;
}
-static int dlpar_cpu_remove_by_index(u32 drc_index)
+static int dlpar_cpu_remove_by_index(u32 drc_index, bool release_drc)
{
struct device_node *dn;
int rc;
@@ -634,7 +644,7 @@ static int dlpar_cpu_remove_by_index(u32 drc_index)
return -ENODEV;
}
- rc = dlpar_cpu_remove(dn, drc_index);
+ rc = dlpar_cpu_remove(dn, drc_index, release_drc);
of_node_put(dn);
return rc;
}
@@ -699,7 +709,7 @@ static int dlpar_cpu_remove_by_count(u32 cpus_to_remove)
}
for (i = 0; i < cpus_to_remove; i++) {
- rc = dlpar_cpu_remove_by_index(cpu_drcs[i]);
+ rc = dlpar_cpu_remove_by_index(cpu_drcs[i], true);
if (rc)
break;
@@ -710,7 +720,7 @@ static int dlpar_cpu_remove_by_count(u32 cpus_to_remove)
pr_warn("CPU hot-remove failed, adding back removed CPUs\n");
for (i = 0; i < cpus_removed; i++)
- dlpar_cpu_add(cpu_drcs[i]);
+ dlpar_cpu_add(cpu_drcs[i], true);
rc = -EINVAL;
} else {
@@ -780,7 +790,7 @@ static int dlpar_cpu_add_by_count(u32 cpus_to_add)
}
for (i = 0; i < cpus_to_add; i++) {
- rc = dlpar_cpu_add(cpu_drcs[i]);
+ rc = dlpar_cpu_add(cpu_drcs[i], true);
if (rc)
break;
@@ -791,7 +801,7 @@ static int dlpar_cpu_add_by_count(u32 cpus_to_add)
pr_warn("CPU hot-add failed, removing any added CPUs\n");
for (i = 0; i < cpus_added; i++)
- dlpar_cpu_remove_by_index(cpu_drcs[i]);
+ dlpar_cpu_remove_by_index(cpu_drcs[i], true);
rc = -EINVAL;
} else {
@@ -817,7 +827,7 @@ int dlpar_cpu(struct pseries_hp_errorlog *hp_elog)
if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_COUNT)
rc = dlpar_cpu_remove_by_count(count);
else if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_INDEX)
- rc = dlpar_cpu_remove_by_index(drc_index);
+ rc = dlpar_cpu_remove_by_index(drc_index, true);
else
rc = -EINVAL;
break;
@@ -825,7 +835,7 @@ int dlpar_cpu(struct pseries_hp_errorlog *hp_elog)
if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_COUNT)
rc = dlpar_cpu_add_by_count(count);
else if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_INDEX)
- rc = dlpar_cpu_add(drc_index);
+ rc = dlpar_cpu_add(drc_index, true);
else
rc = -EINVAL;
break;
@@ -850,7 +860,7 @@ static ssize_t dlpar_cpu_probe(const char *buf, size_t count)
if (rc)
return -EINVAL;
- rc = dlpar_cpu_add(drc_index);
+ rc = dlpar_cpu_add(drc_index, true);
return rc ? rc : count;
}
@@ -871,7 +881,7 @@ static ssize_t dlpar_cpu_release(const char *buf, size_t count)
return -EINVAL;
}
- rc = dlpar_cpu_remove(dn, drc_index);
+ rc = dlpar_cpu_remove(dn, drc_index, true);
of_node_put(dn);
return rc ? rc : count;
next prev parent reply other threads:[~2018-06-21 0:29 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-21 0:28 [PATCH v04 0/9] powerpc/hotplug: Update affinity for migrated CPUs Michael Bringmann
2018-06-21 0:29 ` Michael Bringmann [this message]
2018-06-21 0:29 ` [PATCH v04 2/9] hotplug/cpu: Add operation queuing function Michael Bringmann
2018-06-21 0:29 ` [PATCH v04 3/9] hotplug/cpu: Provide CPU readd operation Michael Bringmann
2018-06-21 0:29 ` [PATCH v04 4/9] mobility/numa: Ensure numa update does not overlap Michael Bringmann
2018-06-21 0:29 ` [PATCH v04 5/9] numa: Disable/enable arch_update_cpu_topology Michael Bringmann
2018-06-21 0:30 ` [PATCH v04 6/9] pmt/numa: Disable arch_update_cpu_topology during CPU readd Michael Bringmann
2018-06-21 0:30 ` [PATCH v04 7/9] powerpc/rtas: Allow disabling rtas_event_scan Michael Bringmann
2018-06-21 0:30 ` [PATCH v04 8/9] hotplug/rtas: No rtas_event_scan during PMT update Michael Bringmann
2018-06-21 0:30 ` [PATCH v04 9/9] hotplug/pmt: Update topology after PMT Michael Bringmann
2018-06-21 0:49 ` Michael Bringmann
2018-06-21 2:13 ` kbuild test robot
2018-06-21 19:37 ` Michael Bringmann
2018-06-21 19:37 ` Michael Bringmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41cb900b-4e7d-4085-0a67-faeb46b523b0@linux.vnet.ibm.com \
--to=mwb@linux.vnet.ibm.com \
--cc=jallen@linux.vnet.ibm.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=nfont@linux.vnet.ibm.com \
--cc=tlfalcon@linux.vnet.ibm.com \
--cc=tyreld@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).