linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Alexey Kardashevskiy <aik@ozlabs.ru>
To: David Gibson <david@gibson.dropbear.id.au>
Cc: "linuxppc-dev@lists.ozlabs.org" <linuxppc-dev@lists.ozlabs.org>,
	Paul Mackerras <paulus@samba.org>,
	Alex Williamson <alex.williamson@redhat.com>,
	kvm-ppc <kvm-ppc@vger.kernel.org>,
	kvm@vger.kernel.org
Subject: Re: [PATCH kernel 9/9] KVM: PPC: VFIO device: support SPAPR TCE
Date: Tue, 22 Mar 2016 11:34:55 +1100	[thread overview]
Message-ID: <56F0932F.2050708@ozlabs.ru> (raw)
In-Reply-To: <20160321051932.GJ23586@voom.redhat.com>

Uff, lost cc: list. Added back. Some comments below.


On 03/21/2016 04:19 PM, David Gibson wrote:
> On Fri, Mar 18, 2016 at 11:12:26PM +1100, Alexey Kardashevskiy wrote:
>> On March 15, 2016 17:29:26 David Gibson <david@gibson.dropbear.id.au> wrote:
>>
>>> On Fri, Mar 11, 2016 at 10:09:50AM +1100, Alexey Kardashevskiy wrote:
>>>> On 03/10/2016 04:21 PM, David Gibson wrote:
>>>>> On Wed, Mar 09, 2016 at 08:20:12PM +1100, Alexey Kardashevskiy wrote:
>>>>>> On 03/09/2016 04:45 PM, David Gibson wrote:
>>>>>>> On Mon, Mar 07, 2016 at 02:41:17PM +1100, Alexey Kardashevskiy wrote:
>>>>>>>> sPAPR TCE IOMMU is para-virtualized and the guest does map/unmap
>>>>>>>> via hypercalls which take a logical bus id (LIOBN) as a target IOMMU
>>>>>>>> identifier. LIOBNs are made up, advertised to guest systems and
>>>>>>>> linked to IOMMU groups by the user space.
>>>>>>>> In order to enable acceleration for IOMMU operations in KVM, we need
>>>>>>>> to tell KVM the information about the LIOBN-to-group mapping.
>>>>>>>>
>>>>>>>> For that, a new KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE_LIOBN parameter
>>>>>>>> is added which accepts:
>>>>>>>> - a VFIO group fd and IO base address to find the actual hardware
>>>>>>>> TCE table;
>>>>>>>> - a LIOBN to assign to the found table.
>>>>>>>>
>>>>>>>> Before notifying KVM about new link, this check the group for being
>>>>>>>> registered with KVM device in order to release them at unexpected KVM
>>>>>>>> finish.
>>>>>>>>
>>>>>>>> This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user
>>>>>>>> space.
>>>>>>>>
>>>>>>>> While we are here, this also fixes VFIO KVM device compiling to let it
>>>>>>>> link to a KVM module.
>>>>>>>>
>>>>>>>> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
>>>>>>>> ---
>>>>>>>>   Documentation/virtual/kvm/devices/vfio.txt |  21 +++++-
>>>>>>>>   arch/powerpc/kvm/Kconfig                   |   1 +
>>>>>>>>   arch/powerpc/kvm/Makefile                  |   5 +-
>>>>>>>>   arch/powerpc/kvm/powerpc.c                 |   1 +
>>>>>>>>   include/uapi/linux/kvm.h                   |   9 +++
>>>>>>>>   virt/kvm/vfio.c                            | 106
>>>> +++++++++++++++++++++++++++++
>>>>>>>>   6 files changed, 140 insertions(+), 3 deletions(-)
>>>>>>>>
>>>>>>>> diff --git a/Documentation/virtual/kvm/devices/vfio.txt
>>>> b/Documentation/virtual/kvm/devices/vfio.txt
>>>>>>>> index ef51740..c0d3eb7 100644
>>>>>>>> --- a/Documentation/virtual/kvm/devices/vfio.txt
>>>>>>>> +++ b/Documentation/virtual/kvm/devices/vfio.txt
>>>>>>>> @@ -16,7 +16,24 @@ Groups:
>>>>>>>>
>>>>>>>>   KVM_DEV_VFIO_GROUP attributes:
>>>>>>>>     KVM_DEV_VFIO_GROUP_ADD: Add a VFIO group to VFIO-KVM device tracking
>>>>>>>> +	kvm_device_attr.addr points to an int32_t file descriptor
>>>>>>>> +	for the VFIO group.
>>>>>>>
>>>>>>> AFAICT these changes are accurate for VFIO as it is already, in which
>>>>>>> case it might be clearer to put them in a separate patch.
>>>>>>>
>>>>>>>>     KVM_DEV_VFIO_GROUP_DEL: Remove a VFIO group from VFIO-KVM device
>>>> tracking
>>>>>>>> +	kvm_device_attr.addr points to an int32_t file descriptor
>>>>>>>> +	for the VFIO group.
>>>>>>>>
>>>>>>>> -For each, kvm_device_attr.addr points to an int32_t file descriptor
>>>>>>>> -for the VFIO group.
>>>>>>>> +  KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE_LIOBN: sets a liobn for a VFIO group
>>>>>>>> +	kvm_device_attr.addr points to a struct:
>>>>>>>> +		struct kvm_vfio_spapr_tce_liobn {
>>>>>>>> +			__u32	argsz;
>>>>>>>> +			__s32	fd;
>>>>>>>> +			__u32	liobn;
>>>>>>>> +			__u8	pad[4];
>>>>>>>> +			__u64	start_addr;
>>>>>>>> +		};
>>>>>>>> +		where
>>>>>>>> +		@argsz is the size of kvm_vfio_spapr_tce_liobn;
>>>>>>>> +		@fd is a file descriptor for a VFIO group;
>>>>>>>> +		@liobn is a logical bus id to be associated with the group;
>>>>>>>> +		@start_addr is a DMA window offset on the IO (PCI) bus
>>>>>>>
>>>>>>> For the cause of DDW and multiple windows, I'm assuming you can call
>>>>>>> this multiple times with different LIOBNs and the same IOMMU group?
>>>>>>
>>>>>>
>>>>>> Yes. It is called twice per each group (when DDW is activated) - for 32bit
>>>>>> and 64bit windows, this is why @start_addr is there.
>>>>>>
>>>>>>
>>>>>>>> diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig
>>>>>>>> index 1059846..dfa3488 100644
>>>>>>>> --- a/arch/powerpc/kvm/Kconfig
>>>>>>>> +++ b/arch/powerpc/kvm/Kconfig
>>>>>>>> @@ -65,6 +65,7 @@ config KVM_BOOK3S_64
>>>>>>>>   	select KVM
>>>>>>>>   	select KVM_BOOK3S_PR_POSSIBLE if !KVM_BOOK3S_HV_POSSIBLE
>>>>>>>>   	select SPAPR_TCE_IOMMU if IOMMU_SUPPORT
>>>>>>>> +	select KVM_VFIO if VFIO
>>>>>>>>   	---help---
>>>>>>>>   	  Support running unmodified book3s_64 and book3s_32 guest kernels
>>>>>>>>   	  in virtual machines on book3s_64 host processors.
>>>>>>>> diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
>>>>>>>> index 7f7b6d8..71f577c 100644
>>>>>>>> --- a/arch/powerpc/kvm/Makefile
>>>>>>>> +++ b/arch/powerpc/kvm/Makefile
>>>>>>>> @@ -8,7 +8,7 @@ ccflags-y := -Ivirt/kvm -Iarch/powerpc/kvm
>>>>>>>>   KVM := ../../../virt/kvm
>>>>>>>>
>>>>>>>>   common-objs-y = $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o \
>>>>>>>> -		$(KVM)/eventfd.o $(KVM)/vfio.o
>>>>>>>> +		$(KVM)/eventfd.o
>>>>>>>
>>>>>>> Please don't disable the VFIO device for the non-book3s case.  I added
>>>>>>> it (even though it didn't do anything until now) so that libvirt
>>>>>>> wouldn't choke when it finds it's not available.  Obviously the new
>>>>>>> ioctl needs to be only for the right IOMMU setup, but the device
>>>>>>> itself should be available always.
>>>>>>
>>>>>> Ah. Ok, I'll fix this. I just wanted to be able to compile kvm as a module.
>>>>>>
>>>>>>
>>>>>>>>   CFLAGS_e500_mmu.o := -I.
>>>>>>>>   CFLAGS_e500_mmu_host.o := -I.
>>>>>>>> @@ -87,6 +87,9 @@ endif
>>>>>>>>   kvm-book3s_64-objs-$(CONFIG_KVM_XICS) += \
>>>>>>>>   	book3s_xics.o
>>>>>>>>
>>>>>>>> +kvm-book3s_64-objs-$(CONFIG_KVM_VFIO) += \
>>>>>>>> +	$(KVM)/vfio.o \
>>>>>>>> +
>>>>>>>>   kvm-book3s_64-module-objs += \
>>>>>>>>   	$(KVM)/kvm_main.o \
>>>>>>>>   	$(KVM)/eventfd.o \
>>>>>>>> diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
>>>>>>>> index 19aa59b..63f188d 100644
>>>>>>>> --- a/arch/powerpc/kvm/powerpc.c
>>>>>>>> +++ b/arch/powerpc/kvm/powerpc.c
>>>>>>>> @@ -521,6 +521,7 @@ int kvm_vm_ioctl_check_extension(struct kvm
>>>> *kvm, long ext)
>>>>>>>>   #ifdef CONFIG_PPC_BOOK3S_64
>>>>>>>>   	case KVM_CAP_SPAPR_TCE:
>>>>>>>>   	case KVM_CAP_SPAPR_TCE_64:
>>>>>>>> +	case KVM_CAP_SPAPR_TCE_VFIO:
>>>>>>>>   	case KVM_CAP_PPC_ALLOC_HTAB:
>>>>>>>>   	case KVM_CAP_PPC_RTAS:
>>>>>>>>   	case KVM_CAP_PPC_FIXUP_HCALL:
>>>>>>>> diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
>>>>>>>> index 080ffbf..f1abbea 100644
>>>>>>>> --- a/include/uapi/linux/kvm.h
>>>>>>>> +++ b/include/uapi/linux/kvm.h
>>>>>>>> @@ -1056,6 +1056,7 @@ struct kvm_device_attr {
>>>>>>>>   #define  KVM_DEV_VFIO_GROUP			1
>>>>>>>>   #define   KVM_DEV_VFIO_GROUP_ADD			1
>>>>>>>>   #define   KVM_DEV_VFIO_GROUP_DEL			2
>>>>>>>> +#define   KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE_LIOBN	3
>>>>>>>>
>>>>>>>>   enum kvm_device_type {
>>>>>>>>   	KVM_DEV_TYPE_FSL_MPIC_20	= 1,
>>>>>>>> @@ -1075,6 +1076,14 @@ enum kvm_device_type {
>>>>>>>>   	KVM_DEV_TYPE_MAX,
>>>>>>>>   };
>>>>>>>>
>>>>>>>> +struct kvm_vfio_spapr_tce_liobn {
>>>>>>>> +	__u32	argsz;
>>>>>>>> +	__s32	fd;
>>>>>>>> +	__u32	liobn;
>>>>>>>> +	__u8	pad[4];
>>>>>>>> +	__u64	start_addr;
>>>>>>>> +};
>>>>>>>> +
>>>>>>>>   /*
>>>>>>>>    * ioctls for VM fds
>>>>>>>>    */
>>>>>>>> diff --git a/virt/kvm/vfio.c b/virt/kvm/vfio.c
>>>>>>>> index 1dd087d..87c771e 100644
>>>>>>>> --- a/virt/kvm/vfio.c
>>>>>>>> +++ b/virt/kvm/vfio.c
>>>>>>>> @@ -20,6 +20,10 @@
>>>>>>>>   #include <linux/vfio.h>
>>>>>>>>   #include "vfio.h"
>>>>>>>>
>>>>>>>> +#ifdef CONFIG_SPAPR_TCE_IOMMU
>>>>>>>> +#include <asm/kvm_ppc.h>
>>>>>>>> +#endif
>>>>>>>> +
>>>>>>>>   struct kvm_vfio_group {
>>>>>>>>   	struct list_head node;
>>>>>>>>   	struct vfio_group *vfio_group;
>>>>>>>> @@ -60,6 +64,22 @@ static void
>>>> kvm_vfio_group_put_external_user(struct vfio_group *vfio_group)
>>>>>>>>   	symbol_put(vfio_group_put_external_user);
>>>>>>>>   }
>>>>>>>>
>>>>>>>> +static int kvm_vfio_external_user_iommu_id(struct vfio_group *vfio_group)
>>>>>>>> +{
>>>>>>>> +	int (*fn)(struct vfio_group *);
>>>>>>>> +	int ret = -1;
>>>>>>>
>>>>>>> Should this be -ESOMETHING?
>>>>>>>
>>>>>>>> +	fn = symbol_get(vfio_external_user_iommu_id);
>>>>>>>> +	if (!fn)
>>>>>>>> +		return ret;
>>>>>>>> +
>>>>>>>> +	ret = fn(vfio_group);
>>>>>>>> +
>>>>>>>> +	symbol_put(vfio_external_user_iommu_id);
>>>>>>>> +
>>>>>>>> +	return ret;
>>>>>>>> +}
>>>>>>>> +
>>>>>>>>   static bool kvm_vfio_group_is_coherent(struct vfio_group *vfio_group)
>>>>>>>>   {
>>>>>>>>   	long (*fn)(struct vfio_group *, unsigned long);
>>>>>>>> @@ -110,6 +130,22 @@ static void kvm_vfio_update_coherency(struct
>>>> kvm_device *dev)
>>>>>>>>   	mutex_unlock(&kv->lock);
>>>>>>>>   }
>>>>>>>>
>>>>>>>> +#ifdef CONFIG_SPAPR_TCE_IOMMU
>>>>>>>> +static void kvm_vfio_spapr_detach_iommu_group(struct kvm *kvm,
>>>>>>>> +		struct vfio_group *vfio_group)
>>>>>>>
>>>>>>>
>>>>>>> Shouldn't this go in the same patch that introduced the attach
>>>>>>> function?
>>>>>>
>>>>>> Having less patches which touch different maintainers areas is better. I
>>>>>> cannot avoid touching both PPC KVM and VFIO in this patch but I can in
>>>>>> "[PATCH kernel 6/9] KVM: PPC: Associate IOMMU group with guest view of TCE
>>>>>> table".
>>>>>>
>>>>>>
>>>>>>>
>>>>>>>> +{
>>>>>>>> +	int group_id;
>>>>>>>> +	struct iommu_group *grp;
>>>>>>>> +
>>>>>>>> +	group_id = kvm_vfio_external_user_iommu_id(vfio_group);
>>>>>>>> +	grp = iommu_group_get_by_id(group_id);
>>>>>>>> +	if (grp) {
>>>>>>>> +		kvm_spapr_tce_detach_iommu_group(kvm, grp);
>>>>>>>> +		iommu_group_put(grp);
>>>>>>>> +	}
>>>>>>>> +}
>>>>>>>> +#endif
>>>>>>>> +
>>>>>>>>   static int kvm_vfio_set_group(struct kvm_device *dev, long attr, u64 arg)
>>>>>>>>   {
>>>>>>>>   	struct kvm_vfio *kv = dev->private;
>>>>>>>> @@ -186,6 +222,10 @@ static int kvm_vfio_set_group(struct kvm_device
>>>> *dev, long attr, u64 arg)
>>>>>>>>   				continue;
>>>>>>>>
>>>>>>>>   			list_del(&kvg->node);
>>>>>>>> +#ifdef CONFIG_SPAPR_TCE_IOMMU
>>>>>>>
>>>>>>> Better to make a no-op version of the call than have to #ifdef at the
>>>>>>> callsite.
>>>>>>
>>>>>> It is questionable. A x86 reader may decide that
>>>>>> KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE_LIOBN is implemented for x86 and get
>>>>>> confused.
>>>>>>
>>>>>>
>>>>>>>
>>>>>>>> +			kvm_vfio_spapr_detach_iommu_group(dev->kvm,
>>>>>>>> +					kvg->vfio_group);
>>>>>>>> +#endif
>>>>>>>>   			kvm_vfio_group_put_external_user(kvg->vfio_group);
>>>>>>>>   			kfree(kvg);
>>>>>>>>   			ret = 0;
>>>>>>>> @@ -201,6 +241,69 @@ static int kvm_vfio_set_group(struct kvm_device
>>>> *dev, long attr, u64 arg)
>>>>>>>>   		kvm_vfio_update_coherency(dev);
>>>>>>>>
>>>>>>>>   		return ret;
>>>>>>>> +
>>>>>>>> +#ifdef CONFIG_SPAPR_TCE_IOMMU
>>>>>>>> +	case KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE_LIOBN: {
>>>>>>>> +		struct kvm_vfio_spapr_tce_liobn param;
>>>>>>>> +		unsigned long minsz;
>>>>>>>> +		struct kvm_vfio *kv = dev->private;
>>>>>>>> +		struct vfio_group *vfio_group;
>>>>>>>> +		struct kvm_vfio_group *kvg;
>>>>>>>> +		struct fd f;
>>>>>>>> +
>>>>>>>> +		minsz = offsetofend(struct kvm_vfio_spapr_tce_liobn,
>>>>>>>> +				start_addr);
>>>>>>>> +
>>>>>>>> +		if (copy_from_user(&param, (void __user *)arg, minsz))
>>>>>>>> +			return -EFAULT;
>>>>>>>> +
>>>>>>>> +		if (param.argsz < minsz)
>>>>>>>> +			return -EINVAL;
>>>>>>>> +
>>>>>>>> +		f = fdget(param.fd);
>>>>>>>> +		if (!f.file)
>>>>>>>> +			return -EBADF;
>>>>>>>> +
>>>>>>>> +		vfio_group = kvm_vfio_group_get_external_user(f.file);
>>>>>>>> +		fdput(f);
>>>>>>>> +
>>>>>>>> +		if (IS_ERR(vfio_group))
>>>>>>>> +			return PTR_ERR(vfio_group);
>>>>>>>> +
>>>>>>>> +		ret = -ENOENT;
>>>>>>>
>>>>>>> Shouldn't there be some runtime test for the type of the IOMMU?  It's
>>>>>>> possible a kernel could be built for a platform supporting multiple
>>>>>>> IOMMU types.
>>>>>>
>>>>>> Well, may make sense but I do not know to test that. The IOMMU type is a
>>>>>> VFIO container property, not a group property and here (KVM) we only have
>>>>>> groups.
>>>>>
>>>>> Which, as mentioned previously, is broken.
>>>>
>>>> Which I am failing to follow you on this.
>>>>
>>>> What I am trying to achieve here is pretty much referencing a group so it
>>>> cannot be reused. Plus LIOBNs.
>>>
>>> "Plus LIOBNs" is not a trivial change.  You are establishing a linkage
>> >from LIOBNs to groups.  But that doesn't make sense; if mapping in one
>>> (guest) LIOBN affects a group it must affect all groups in the
>>> container.  i.e. LIOBN->container is the natural mapping, *not* LIOBN
>>> to group.
>>
>> I can see your point but i don't see how to proceed now, I'm totally stuck.
>> Pass container fd and then implement new api to lock containers somehow and
>
> I'm not really understanding what the question is about locking containers.
>
>> enumerate groups when updating TCE table (including real mode)?
>
> Why do you need to enumerate groups?  The groups within the container
> share a TCE table, so can't you just update that once?

Well, they share a TCE table but they do not share TCE Kill (TCE cache 
invalidate) register address, it is still per PE but this does not matter 
here (pnv_pci_link_table_and_group() does that), just mentioned to complete 
the picture.


>> Plus new API when we remove a group from a container as the result of guest
>> PCI hot unplug?
>
> I assume you mean a kernel internal API, since it shouldn't need
> anything else visible to userspace.  Won't this happen naturally?
> When the group is removed from the container, it will get its own TCE
> table instead of the previously shared one.
 >
>>>> Passing a container fd does not make much
>>>> sense here as the VFIO device would walk through groups, reference them and
>>>> that is it, there is no locking on VFIO containters and so far there was no
>>>> need to teach KVM about containers.
>>>>
>>>> What do I miss now?
>>>
>>> Referencing the groups is essentially just a useful side effect.  The
>>> important functionality is informing VFIO of the guest LIOBNs; and
>>> LIOBNs map to containers, not groups.
>>
>> No. One liobn maps to one KVM-allocated TCE table, not a container. There
>> can be one or many or none containers per liobn.
>
> Ah, true.

So I need to add new kernel API for KVM to get table(s) from VFIO 
container(s). And invent some locking mechanism to prevent table(s) (or 
associated container(s)) from going away, like 
vfio_group_get_external_user/vfio_group_put_external_user but for 
containers. Correct?



-- 
Alexey

  parent reply	other threads:[~2016-03-22  0:35 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-07  3:41 [PATCH kernel 0/9] KVM, PPC, VFIO: Enable in-kernel acceleration Alexey Kardashevskiy
2016-03-07  3:41 ` [PATCH kernel 1/9] KVM: PPC: Reserve KVM_CAP_SPAPR_TCE_VFIO capability number Alexey Kardashevskiy
2016-03-07  4:58   ` David Gibson
2016-03-07  3:41 ` [PATCH kernel 2/9] powerpc/mmu: Add real mode support for IOMMU preregistered memory Alexey Kardashevskiy
2016-03-07  5:30   ` David Gibson
2016-03-07  3:41 ` [PATCH kernel 3/9] KVM: PPC: Use preregistered memory API to access TCE list Alexey Kardashevskiy
2016-03-07  6:00   ` David Gibson
2016-03-08  5:47     ` Alexey Kardashevskiy
2016-03-08  6:30       ` David Gibson
2016-03-09  8:55         ` Alexey Kardashevskiy
2016-03-09 23:46           ` David Gibson
2016-03-10  8:33     ` Paul Mackerras
2016-03-10 23:42       ` David Gibson
2016-03-07  3:41 ` [PATCH kernel 4/9] powerpc/powernv/iommu: Add real mode version of xchg() Alexey Kardashevskiy
2016-03-07  6:05   ` David Gibson
2016-03-07  7:32     ` Alexey Kardashevskiy
2016-03-08  4:50       ` David Gibson
2016-03-10  8:43   ` Paul Mackerras
2016-03-10  8:46   ` Paul Mackerras
2016-03-07  3:41 ` [PATCH kernel 5/9] KVM: PPC: Enable IOMMU_API for KVM_BOOK3S_64 permanently Alexey Kardashevskiy
2016-03-07  3:41 ` [PATCH kernel 6/9] KVM: PPC: Associate IOMMU group with guest view of TCE table Alexey Kardashevskiy
2016-03-07  6:25   ` David Gibson
2016-03-07  9:38     ` Alexey Kardashevskiy
2016-03-08  4:55       ` David Gibson
2016-03-07  3:41 ` [PATCH kernel 7/9] KVM: PPC: Create a virtual-mode only TCE table handlers Alexey Kardashevskiy
2016-03-08  6:32   ` David Gibson
2016-03-07  3:41 ` [PATCH kernel 8/9] KVM: PPC: Add in-kernel handling for VFIO Alexey Kardashevskiy
2016-03-08 11:08   ` David Gibson
2016-03-09  8:46     ` Alexey Kardashevskiy
2016-03-10  5:18       ` David Gibson
2016-03-11  2:15         ` Alexey Kardashevskiy
2016-03-15  6:00           ` David Gibson
2016-03-07  3:41 ` [PATCH kernel 9/9] KVM: PPC: VFIO device: support SPAPR TCE Alexey Kardashevskiy
2016-03-09  5:45   ` David Gibson
2016-03-09  9:20     ` Alexey Kardashevskiy
2016-03-10  5:21       ` David Gibson
2016-03-10 23:09         ` Alexey Kardashevskiy
2016-03-15  6:04           ` David Gibson
     [not found]             ` <15389a41428.27cb.1ca38dd7e845b990cd13d431eb58563d@ozlabs.ru>
     [not found]               ` <20160321051932.GJ23586@voom.redhat.com>
2016-03-22  0:34                 ` Alexey Kardashevskiy [this message]
2016-03-23  3:03                   ` David Gibson
2016-06-09  6:47                     ` Alexey Kardashevskiy
2016-06-10  6:50                       ` David Gibson
2016-06-14  3:30                         ` Alexey Kardashevskiy
2016-06-15  4:43                           ` David Gibson
2016-04-08  9:13     ` Alexey Kardashevskiy
2016-04-11  3:36       ` David Gibson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56F0932F.2050708@ozlabs.ru \
    --to=aik@ozlabs.ru \
    --cc=alex.williamson@redhat.com \
    --cc=david@gibson.dropbear.id.au \
    --cc=kvm-ppc@vger.kernel.org \
    --cc=kvm@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).