From: "Alastair D'Silva" <alastair@au1.ibm.com>
To: Frederic Barrat <fbarrat@linux.ibm.com>,
linuxppc-dev@lists.ozlabs.org, andrew.donnellan@au1.ibm.com,
clombard@linux.ibm.com
Cc: groug@kaod.org
Subject: Re: [PATCH 10/11] pci/hotplug/pnv-php: Wrap warnings in macro
Date: Tue, 10 Sep 2019 11:03:32 +1000 [thread overview]
Message-ID: <77fb63f474e692e69e2c7e45aca31fd1c176f485.camel@au1.ibm.com> (raw)
In-Reply-To: <20190909154600.19917-11-fbarrat@linux.ibm.com>
On Mon, 2019-09-09 at 17:45 +0200, Frederic Barrat wrote:
> An opencapi slot doesn't have an associated bridge device. It's not
> needed for operation, but any warning is displayed through pci_warn()
> which uses the pci_dev struct of the assocated bridge device. So wrap
> those warning so that a different trace mechanism can be used if it's
> an opencapi slot.
>
> Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
> ---
> drivers/pci/hotplug/pnv_php.c | 51 +++++++++++++++++++------------
> ----
> 1 file changed, 28 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/pci/hotplug/pnv_php.c
> b/drivers/pci/hotplug/pnv_php.c
> index 5ca51d67db4b..d01a8595bc5c 100644
> --- a/drivers/pci/hotplug/pnv_php.c
> +++ b/drivers/pci/hotplug/pnv_php.c
> @@ -18,6 +18,9 @@
> #define DRIVER_AUTHOR "Gavin Shan, IBM Corporation"
> #define DRIVER_DESC "PowerPC PowerNV PCI Hotplug Driver"
>
> +#define SLOT_WARN(sl, x...) \
> + ((sl)->pdev ? pci_warn((sl)->pdev, x) : dev_warn(&(sl)->bus-
> >dev, x))
> +
> struct pnv_php_event {
> bool added;
> struct pnv_php_slot *php_slot;
> @@ -265,7 +268,7 @@ static int pnv_php_add_devtree(struct
> pnv_php_slot *php_slot)
>
> ret = pnv_pci_get_device_tree(php_slot->dn->phandle, fdt1,
> 0x10000);
> if (ret) {
> - pci_warn(php_slot->pdev, "Error %d getting FDT blob\n",
> ret);
> + SLOT_WARN(php_slot, "Error %d getting FDT blob\n",
> ret);
> goto free_fdt1;
> }
>
> @@ -279,7 +282,7 @@ static int pnv_php_add_devtree(struct
> pnv_php_slot *php_slot)
> dt = of_fdt_unflatten_tree(fdt, php_slot->dn, NULL);
> if (!dt) {
> ret = -EINVAL;
> - pci_warn(php_slot->pdev, "Cannot unflatten FDT\n");
> + SLOT_WARN(php_slot, "Cannot unflatten FDT\n");
> goto free_fdt;
> }
>
> @@ -289,15 +292,15 @@ static int pnv_php_add_devtree(struct
> pnv_php_slot *php_slot)
> ret = pnv_php_populate_changeset(&php_slot->ocs, php_slot->dn);
> if (ret) {
> pnv_php_reverse_nodes(php_slot->dn);
> - pci_warn(php_slot->pdev, "Error %d populating
> changeset\n",
> - ret);
> + SLOT_WARN(php_slot, "Error %d populating changeset\n",
> + ret);
> goto free_dt;
> }
>
> php_slot->dn->child = NULL;
> ret = of_changeset_apply(&php_slot->ocs);
> if (ret) {
> - pci_warn(php_slot->pdev, "Error %d applying
> changeset\n", ret);
> + SLOT_WARN(php_slot, "Error %d applying changeset\n",
> ret);
> goto destroy_changeset;
> }
>
> @@ -337,10 +340,10 @@ int pnv_php_set_slot_power_state(struct
> hotplug_slot *slot,
> if (ret > 0) {
> if (be64_to_cpu(msg.params[1]) != php_slot->dn->phandle
> ||
> be64_to_cpu(msg.params[2]) != state) {
> - pci_warn(php_slot->pdev, "Wrong msg (%lld,
> %lld, %lld)\n",
> - be64_to_cpu(msg.params[1]),
> - be64_to_cpu(msg.params[2]),
> - be64_to_cpu(msg.params[3]));
> + SLOT_WARN(php_slot, "Wrong msg (%lld, %lld,
> %lld)\n",
> + be64_to_cpu(msg.params[1]),
> + be64_to_cpu(msg.params[2]),
> + be64_to_cpu(msg.params[3]));
> return -ENOMSG;
> }
> if (be64_to_cpu(msg.params[3]) != OPAL_SUCCESS) {
> @@ -359,8 +362,8 @@ int pnv_php_set_slot_power_state(struct
> hotplug_slot *slot,
> return ret;
>
> error:
> - pci_warn(php_slot->pdev, "Error %d powering %s\n",
> - ret, (state == OPAL_PCI_SLOT_POWER_ON) ? "on" :
> "off");
> + SLOT_WARN(php_slot, "Error %d powering %s\n",
> + ret, (state == OPAL_PCI_SLOT_POWER_ON) ? "on" :
> "off");
> return ret;
> }
> EXPORT_SYMBOL_GPL(pnv_php_set_slot_power_state);
> @@ -378,8 +381,8 @@ static int pnv_php_get_power_state(struct
> hotplug_slot *slot, u8 *state)
> */
> ret = pnv_pci_get_power_state(php_slot->id, &power_state);
> if (ret) {
> - pci_warn(php_slot->pdev, "Error %d getting power
> status\n",
> - ret);
> + SLOT_WARN(php_slot, "Error %d getting power status\n",
> + ret);
> } else {
> *state = power_state;
> }
> @@ -402,7 +405,7 @@ static int pnv_php_get_adapter_state(struct
> hotplug_slot *slot, u8 *state)
> *state = presence;
> ret = 0;
> } else {
> - pci_warn(php_slot->pdev, "Error %d getting presence\n",
> ret);
> + SLOT_WARN(php_slot, "Error %d getting presence\n",
> ret);
> }
>
> return ret;
> @@ -637,7 +640,7 @@ static int pnv_php_register_slot(struct
> pnv_php_slot *php_slot)
> ret = pci_hp_register(&php_slot->slot, php_slot->bus,
> php_slot->slot_no, php_slot->name);
> if (ret) {
> - pci_warn(php_slot->pdev, "Error %d registering slot\n",
> ret);
> + SLOT_WARN(php_slot, "Error %d registering slot\n",
> ret);
> return ret;
> }
>
> @@ -690,7 +693,7 @@ static int pnv_php_enable_msix(struct
> pnv_php_slot *php_slot)
> /* Enable MSIx */
> ret = pci_enable_msix_exact(pdev, &entry, 1);
> if (ret) {
> - pci_warn(pdev, "Error %d enabling MSIx\n", ret);
> + SLOT_WARN(php_slot, "Error %d enabling MSIx\n", ret);
> return ret;
> }
>
> @@ -734,8 +737,9 @@ static irqreturn_t pnv_php_interrupt(int irq,
> void *data)
> (sts & PCI_EXP_SLTSTA_PDC)) {
> ret = pnv_pci_get_presence_state(php_slot->id,
> &presence);
> if (ret) {
> - pci_warn(pdev, "PCI slot [%s] error %d getting
> presence (0x%04x), to retry the operation.\n",
> - php_slot->name, ret, sts);
> + SLOT_WARN(php_slot,
> + "PCI slot [%s] error %d getting
> presence (0x%04x), to retry the operation.\n",
> + php_slot->name, ret, sts);
> return IRQ_HANDLED;
> }
>
> @@ -764,8 +768,9 @@ static irqreturn_t pnv_php_interrupt(int irq,
> void *data)
> */
> event = kzalloc(sizeof(*event), GFP_ATOMIC);
> if (!event) {
> - pci_warn(pdev, "PCI slot [%s] missed hotplug event
> 0x%04x\n",
> - php_slot->name, sts);
> + SLOT_WARN(php_slot,
> + "PCI slot [%s] missed hotplug event
> 0x%04x\n",
> + php_slot->name, sts);
> return IRQ_HANDLED;
> }
>
> @@ -789,7 +794,7 @@ static void pnv_php_init_irq(struct pnv_php_slot
> *php_slot, int irq)
> /* Allocate workqueue */
> php_slot->wq = alloc_workqueue("pciehp-%s", 0, 0, php_slot-
> >name);
> if (!php_slot->wq) {
> - pci_warn(pdev, "Cannot alloc workqueue\n");
> + SLOT_WARN(php_slot, "Cannot alloc workqueue\n");
> pnv_php_disable_irq(php_slot, true);
> return;
> }
> @@ -813,7 +818,7 @@ static void pnv_php_init_irq(struct pnv_php_slot
> *php_slot, int irq)
> php_slot->name, php_slot);
> if (ret) {
> pnv_php_disable_irq(php_slot, true);
> - pci_warn(pdev, "Error %d enabling IRQ %d\n", ret, irq);
> + SLOT_WARN(php_slot, "Error %d enabling IRQ %d\n", ret,
> irq);
> return;
> }
>
> @@ -849,7 +854,7 @@ static void pnv_php_enable_irq(struct
> pnv_php_slot *php_slot)
>
> ret = pci_enable_device(pdev);
> if (ret) {
> - pci_warn(pdev, "Error %d enabling device\n", ret);
> + SLOT_WARN(php_slot, "Error %d enabling device\n", ret);
> return;
> }
>
Reviewed-by: Alastair D'Silva <alastair@d-silva.org>
--
Alastair D'Silva
Open Source Developer
Linux Technology Centre, IBM Australia
mob: 0423 762 819
next prev parent reply other threads:[~2019-09-10 1:09 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-09 15:45 [PATCH 00/11] opencapi: enable card reset and link retraining Frederic Barrat
2019-09-09 15:45 ` [PATCH 01/11] powerpc/powernv/ioda: Fix ref count for devices with their own PE Frederic Barrat
2019-09-10 0:20 ` Alastair D'Silva
2019-09-26 16:44 ` Andrew Donnellan
2019-09-26 17:15 ` Frederic Barrat
2019-09-27 6:54 ` Alexey Kardashevskiy
2019-11-12 17:38 ` Frederic Barrat
2019-11-18 1:04 ` Alistair Popple
2019-11-18 1:24 ` Oliver O'Halloran
2019-11-18 2:36 ` Alistair Popple
2019-11-18 18:21 ` Frederic Barrat
2019-09-09 15:45 ` [PATCH 02/11] powerpc/powernv/ioda: Protect PE list Frederic Barrat
2019-09-10 0:34 ` Alastair D'Silva
2019-11-19 12:55 ` Frederic Barrat
2019-11-19 13:22 ` Oliver O'Halloran
2019-11-19 14:36 ` Frederic Barrat
2019-11-19 5:55 ` Andrew Donnellan
2019-09-09 15:45 ` [PATCH 03/11] powerpc/powernv/ioda: set up PE on opencapi device when enabling Frederic Barrat
2019-09-10 0:38 ` Alastair D'Silva
2019-09-27 16:43 ` Andrew Donnellan
2019-09-09 15:45 ` [PATCH 04/11] powerpc/powernv/ioda: Release opencapi device Frederic Barrat
2019-09-10 0:56 ` Alastair D'Silva
2019-11-19 17:32 ` Frederic Barrat
2019-11-19 7:08 ` Andrew Donnellan
2019-09-09 15:45 ` [PATCH 05/11] powerpc/powernv/ioda: Find opencapi slot for a device node Frederic Barrat
2019-09-10 0:57 ` Alastair D'Silva
2019-11-19 1:26 ` Andrew Donnellan
2019-11-19 14:33 ` Frederic Barrat
2019-09-09 15:45 ` [PATCH 06/11] pci/hotplug/pnv-php: Remove erroneous warning Frederic Barrat
2019-09-10 0:58 ` Alastair D'Silva
2019-11-19 5:00 ` Andrew Donnellan
2019-09-09 15:45 ` [PATCH 07/11] pci/hotplug/pnv-php: Improve error msg on power state change failure Frederic Barrat
2019-09-10 0:59 ` Alastair D'Silva
2019-11-19 2:23 ` Andrew Donnellan
2019-09-09 15:45 ` [PATCH 08/11] pci/hotplug/pnv-php: Register opencapi slots Frederic Barrat
2019-09-10 1:00 ` Alastair D'Silva
2019-11-19 5:18 ` Andrew Donnellan
2019-11-19 15:15 ` Frederic Barrat
2019-09-09 15:45 ` [PATCH 09/11] pci/hotplug/pnv-php: Relax check when disabling slot Frederic Barrat
2019-09-10 1:00 ` Alastair D'Silva
2019-09-27 15:56 ` Andrew Donnellan
2019-09-09 15:45 ` [PATCH 10/11] pci/hotplug/pnv-php: Wrap warnings in macro Frederic Barrat
2019-09-10 1:03 ` Alastair D'Silva [this message]
2019-09-26 17:18 ` Andrew Donnellan
2019-09-09 15:46 ` [PATCH 11/11] ocxl: Add PCI hotplug dependency to Kconfig Frederic Barrat
2019-09-10 1:03 ` Alastair D'Silva
2019-09-26 17:11 ` Andrew Donnellan
2019-09-24 4:24 ` [PATCH 00/11] opencapi: enable card reset and link retraining Alexey Kardashevskiy
2019-09-24 6:39 ` Frederic Barrat
2019-09-25 0:20 ` Alexey Kardashevskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=77fb63f474e692e69e2c7e45aca31fd1c176f485.camel@au1.ibm.com \
--to=alastair@au1.ibm.com \
--cc=andrew.donnellan@au1.ibm.com \
--cc=clombard@linux.ibm.com \
--cc=fbarrat@linux.ibm.com \
--cc=groug@kaod.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).