LinuxPPC-Dev Archive on lore.kernel.org
 help / color / Atom feed
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
To: "Alastair D'Silva" <alastair@au1.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org, linux-nvdimm@lists.01.org
Subject: Re: [PATCH 04/10] powerpc: Map & release OpenCAPI LPC memory
Date: Mon, 11 Nov 2019 15:04:26 +0530
Message-ID: <8736euycwt.fsf@linux.ibm.com> (raw)
In-Reply-To: <20191025044721.16617-5-alastair@au1.ibm.com>

"Alastair D'Silva" <alastair@au1.ibm.com> writes:

> From: Alastair D'Silva <alastair@d-silva.org>
>
> This patch adds platform support to map & release LPC memory.
>
> Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
> ---
>  arch/powerpc/include/asm/pnv-ocxl.h   |  2 ++
>  arch/powerpc/platforms/powernv/ocxl.c | 41 +++++++++++++++++++++++++++
>  include/linux/memory_hotplug.h        |  5 ++++
>  mm/memory_hotplug.c                   |  3 +-
>  4 files changed, 50 insertions(+), 1 deletion(-)
>
> diff --git a/arch/powerpc/include/asm/pnv-ocxl.h b/arch/powerpc/include/asm/pnv-ocxl.h
> index 7de82647e761..f8f8ffb48aa8 100644
> --- a/arch/powerpc/include/asm/pnv-ocxl.h
> +++ b/arch/powerpc/include/asm/pnv-ocxl.h
> @@ -32,5 +32,7 @@ extern int pnv_ocxl_spa_remove_pe_from_cache(void *platform_data, int pe_handle)
>  
>  extern int pnv_ocxl_alloc_xive_irq(u32 *irq, u64 *trigger_addr);
>  extern void pnv_ocxl_free_xive_irq(u32 irq);
> +extern u64 pnv_ocxl_platform_lpc_setup(struct pci_dev *pdev, u64 size);
> +extern void pnv_ocxl_platform_lpc_release(struct pci_dev *pdev);
>  
>  #endif /* _ASM_PNV_OCXL_H */
> diff --git a/arch/powerpc/platforms/powernv/ocxl.c b/arch/powerpc/platforms/powernv/ocxl.c
> index 8c65aacda9c8..c6d4234e0aba 100644
> --- a/arch/powerpc/platforms/powernv/ocxl.c
> +++ b/arch/powerpc/platforms/powernv/ocxl.c
> @@ -475,6 +475,47 @@ void pnv_ocxl_spa_release(void *platform_data)
>  }
>  EXPORT_SYMBOL_GPL(pnv_ocxl_spa_release);
>  
> +u64 pnv_ocxl_platform_lpc_setup(struct pci_dev *pdev, u64 size)
> +{
> +	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
> +	struct pnv_phb *phb = hose->private_data;
> +	u32 bdfn = (pdev->bus->number << 8) | pdev->devfn;
> +	u64 base_addr = 0;
> +	int rc;
> +
> +	rc = opal_npu_mem_alloc(phb->opal_id, bdfn, size, &base_addr);
> +	if (rc) {
> +		dev_warn(&pdev->dev,
> +			 "OPAL could not allocate LPC memory, rc=%d\n", rc);
> +		return 0;
> +	}
> +
> +	base_addr = be64_to_cpu(base_addr);
> +
> +	rc = check_hotplug_memory_addressable(base_addr >> PAGE_SHIFT,
> +					      size >> PAGE_SHIFT);
> +	if (rc)
> +		return 0;
> +
> +	return base_addr;
> +}
> +EXPORT_SYMBOL_GPL(pnv_ocxl_platform_lpc_setup);
> +
> +void pnv_ocxl_platform_lpc_release(struct pci_dev *pdev)
> +{
> +	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
> +	struct pnv_phb *phb = hose->private_data;
> +	u32 bdfn = (pdev->bus->number << 8) | pdev->devfn;
> +	int rc;
> +
> +	rc = opal_npu_mem_release(phb->opal_id, bdfn);
> +	if (rc)
> +		dev_warn(&pdev->dev,
> +			 "OPAL reported rc=%d when releasing LPC memory\n", rc);
> +}
> +EXPORT_SYMBOL_GPL(pnv_ocxl_platform_lpc_release);
> +
> +
>  int pnv_ocxl_spa_remove_pe_from_cache(void *platform_data, int pe_handle)
>  {
>  	struct spa_data *data = (struct spa_data *) platform_data;
> diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
> index f46ea71b4ffd..3f5f1a642abe 100644
> --- a/include/linux/memory_hotplug.h
> +++ b/include/linux/memory_hotplug.h
> @@ -339,6 +339,11 @@ static inline int remove_memory(int nid, u64 start, u64 size)
>  static inline void __remove_memory(int nid, u64 start, u64 size) {}
>  #endif /* CONFIG_MEMORY_HOTREMOVE */
>  
> +#if CONFIG_MEMORY_HOTPLUG_SPARSE
> +int check_hotplug_memory_addressable(unsigned long pfn,
> +		unsigned long nr_pages);
> +#endif /* CONFIG_MEMORY_HOTPLUG_SPARSE */
> +
>  extern void __ref free_area_init_core_hotplug(int nid);
>  extern int __add_memory(int nid, u64 start, u64 size);
>  extern int add_memory(int nid, u64 start, u64 size);
> diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
> index 2cecf07b396f..b39827dbd071 100644
> --- a/mm/memory_hotplug.c
> +++ b/mm/memory_hotplug.c
> @@ -278,7 +278,7 @@ static int check_pfn_span(unsigned long pfn, unsigned long nr_pages,
>  	return 0;
>  }
>  
> -static int check_hotplug_memory_addressable(unsigned long pfn,
> +int check_hotplug_memory_addressable(unsigned long pfn,
>  					    unsigned long nr_pages)
>  {
>  	const u64 max_addr = PFN_PHYS(pfn + nr_pages) - 1;
> @@ -294,6 +294,7 @@ static int check_hotplug_memory_addressable(unsigned long pfn,
>  
>  	return 0;
>  }
> +EXPORT_SYMBOL_GPL(check_hotplug_memory_addressable);
>  
>  /*
>   * Reasonably generic function for adding memory.  It is
> -- 
> 2.21.0

If you can rearrange the patch to show the callers in this same patch
that would make it easy to follow.

-aneesh

  parent reply index

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-25  4:46 [PATCH 00/10] Add support for OpenCAPI SCM devices Alastair D'Silva
2019-10-25  4:46 ` [PATCH 01/10] memory_hotplug: Add a bounds check to __add_pages Alastair D'Silva
2019-10-25  4:46 ` [PATCH 02/10] nvdimm: remove prototypes for nonexistent functions Alastair D'Silva
2019-10-27 23:41   ` Andrew Donnellan
2019-11-07 17:56   ` Frederic Barrat
2019-11-15  4:30   ` Dan Williams
2019-10-25  4:46 ` [PATCH 03/10] powerpc: Add OPAL calls for LPC memory alloc/release Alastair D'Silva
2019-11-07 17:57   ` Frederic Barrat
2019-10-25  4:46 ` [PATCH 04/10] powerpc: Map & release OpenCAPI LPC memory Alastair D'Silva
2019-10-27 21:24   ` kbuild test robot
2019-10-27 21:59   ` kbuild test robot
2019-10-28  2:34   ` kbuild test robot
2019-10-29  1:49   ` Andrew Donnellan
2019-10-29  2:44     ` Alastair D'Silva
2019-10-29  2:47       ` Andrew Donnellan
2019-11-07 17:59   ` Frederic Barrat
2019-11-11  9:34   ` Aneesh Kumar K.V [this message]
2019-10-25  4:47 ` [PATCH 05/10] ocxl: Tally up the LPC memory on a link & allow it to be mapped Alastair D'Silva
2019-11-07 18:02   ` Frederic Barrat
2019-10-25  4:47 ` [PATCH 06/10] ocxl: Add functions to map/unmap LPC memory Alastair D'Silva
2019-11-07 18:05   ` Frederic Barrat
2019-10-25  4:47 ` [PATCH 07/10] ocxl: Save the device serial number in ocxl_fn Alastair D'Silva
2019-11-06  3:10   ` Andrew Donnellan
2019-11-07 18:18   ` Frederic Barrat
2019-10-25  4:47 ` [PATCH 08/10] nvdimm: Add driver for OpenCAPI Storage Class Memory Alastair D'Silva
2019-10-27 22:19   ` kbuild test robot
2019-10-27 22:53   ` kbuild test robot
2019-10-28  1:12   ` [RFC PATCH] nvdimm: scm_get() can be static kbuild test robot
2019-11-11 11:14   ` [PATCH 08/10] nvdimm: Add driver for OpenCAPI Storage Class Memory Aneesh Kumar K.V
2019-11-12  5:37     ` Dan Williams
2019-11-12  5:41       ` Dan Williams
2019-11-14 13:41   ` Frederic Barrat
2019-11-14 16:35     ` Dan Williams
2019-11-18 23:47       ` Andrew Donnellan
2019-11-19  0:04         ` Dan Williams
2019-11-19  2:48         ` Alastair D'Silva
2019-11-19  3:26           ` Andrew Donnellan
2019-11-19  4:41             ` Dan Williams
2019-11-18 23:01     ` Alastair D'Silva
2019-10-25  4:47 ` [PATCH 09/10] powerpc: Enable OpenCAPI Storage Class Memory driver on bare metal Alastair D'Silva
2019-10-28  2:43   ` Oliver O'Halloran
2019-11-08  7:10   ` Frederic Barrat
2019-11-11  9:46   ` Aneesh Kumar K.V
2019-10-25  4:47 ` [PATCH 10/10] ocxl: Conditionally bind SCM devices to the generic OCXL driver Alastair D'Silva
2019-10-26  6:43   ` Christoph Hellwig
2019-11-06  3:46   ` Andrew Donnellan
2019-11-07 18:08   ` Frederic Barrat
2019-11-08  0:37     ` Alastair D'Silva
2019-10-25  7:57 ` [PATCH 00/10] Add support for OpenCAPI SCM devices Geert Uytterhoeven

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8736euycwt.fsf@linux.ibm.com \
    --to=aneesh.kumar@linux.ibm.com \
    --cc=alastair@au1.ibm.com \
    --cc=linux-nvdimm@lists.01.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LinuxPPC-Dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linuxppc-dev/0 linuxppc-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linuxppc-dev linuxppc-dev/ https://lore.kernel.org/linuxppc-dev \
		linuxppc-dev@lists.ozlabs.org linuxppc-dev@ozlabs.org
	public-inbox-index linuxppc-dev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.ozlabs.lists.linuxppc-dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git